Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COVER, BATTERY BOX

Active
SPE7L7-26-T-4690Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of five battery box covers, identified by NSN 6160017222800 and part number 25134448, under solicitation SPE7L7-26-T-4690, issued by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. The unit price is $5.00 per item, with a total contract value of $25.00, and delivery is required within 225 days from the award date, targeting April 4, 2027. All items must be delivered FOB origin with no tolerance for quantity variance, inspected and accepted at the destination. Packaging must comply fully with MIL-STD-2073-1E and DLA’s packaging requirements, including specific procedures for preservation, packaging materials, and container type, with marking strictly following MIL-STD-129 and no special marking codes applied. Palletization must adhere to DLA packaging standards, and the shipment is to be sent to the designated parcel post and freight shipping address in New Cumberland, PA. Quality and inspection standards are governed by MIL-STD-1916 or a comparable zero-based sampling plan, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major unless otherwise stated in applicable documents, and zero non-conformances are required in sample lots unless contract provisions allow otherwise. The contractor must also comply with technical and quality requirements identified by R and I numbers referenced in the DLA Master List, including the removal of government identification from non-accepted supplies and physical identification marking of bare items. The contract falls under NAICS code 335311 and is a federal procurement with no set-aside designation, managed by Tiffany Merritt at DLA, with full access to specifications and compliance details through the provided DLA web links.

General Info

Five battery box covers at $5 each, delivery by April 4, 2027, FOB origin, strict MIL-STD packaging and inspection requirements.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7L7-26-T-4690

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
Tiffany Merritt
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COVER,BATTERY BOX
COVER<(>,<)> BATTERY BOX
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
VOLVO GROUP NORTH AMERICA LLC 5NS11 P/N 25134448
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697922 0001 EA 5.000
NSN/MATERIAL:6160017222800
DELIVERY (IN DAYS):0225
SPE7L7-26-T-4690
SECTION B
PR: 7017697922 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/04/2027 Original Required Delivery Date:04/04/2027
SPE7L7-26-T-4690 NSN/Part Number: 6160-01-722-2800 Quantity: 5 EA Purchase Request: 7017697922QTY: 5 Delivery: 225 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
PANEL, POWER DISTRIB
Solicitation # SPE7M1-26-T-273Q
This contract is a solicitation for the procurement of 14 power distribution panels, identified by NSN 6110-01-453-6081 and part number 4S1639-2 from Panelmatic Electrical Solutions LLC. The requirement is a total small business set-aside issued by the Department of Defense Maritime Supply Chain. Delivery is required within 193 days, with a need ship date of July 7, 2026, and a final required delivery date of January 6, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Strict environmental and quality compliance is required, specifically prohibiting the use of Class I ozone depleting chemicals and the intentional addition of mercury, with limited exceptions for functional components like batteries or sensors. The contract incorporates several DLA master technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking standards under MIL-STD-129. This is designated as a critical application item, and any substitute chemicals must be submitted for approval.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M0-26-T-039K
This contract is a solicitation for the procurement of one special power transformer, identified by NSN 6120-01-718-9497. The requirement is issued by the Department of Defense Maritime Supply Chain ESOC Buys and specifies a delivery timeframe of five days after the order. The item is to be delivered FOB Origin to the USS Louis H. Wilson Jr at Bath Iron Works in West Bath, Maine, with an original required delivery date of March 31, 2026. The agreement incorporates strict technical and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional components like batteries or sensors as specified by NAVSEA. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and shipments must be sent via the fastest traceable means rather than parcel post.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-14WT
This contract is for the procurement of three wiring harnesses, identified as part number 29558426 from Allison Transmission Inc and NSN 6150017175157. The item is designated as a critical application item and must adhere to specific DLA technical and quality requirements, including standards for measuring and test equipment, source approval documentation, and the removal of government identification from non-accepted supplies. Delivery is required within 20 days, with an original required delivery date of July 15, 2026. The agreement specifies strict quality control and sampling protocols in accordance with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA procurement requirements. The shipment is destined for the GHQ Jordan Armed Forces in Amman, Jordan, with Serra International Inc serving as the freight forwarder. Inspection and acceptance will take place at the point of origin.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-14WV
This contract is for the procurement of three wiring harnesses, identified as critical application items with part number 29558426 from Allison Transmission Inc and NSN 6150017175157. The order requires a delivery timeframe of 20 days after receipt of order, with inspection and acceptance occurring at the point of origin. Shipping is coordinated through Serra International Inc for final delivery to the GHQ Jordan Armed Forces in Amman, Jordan. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in sample lots. Additionally, the contractor must comply with requirements regarding the removal of government identification from non-accepted supplies and the use of approved measuring and test equipment.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-272K
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of one power transformer under National Stock Number 5950-01-320-3925. The contract requires a delivery timeframe of five days after receipt of order and is categorized under NAICS code 335311. The place of performance is designated as FPO 96666. The agreement incorporates specific DLA technical and quality requirements, including mandatory packaging standards and the removal of government identification from any non-accepted supplies. Alternate offerors must provide a complete data package for both approved and alternate parts. The solicitation was posted on August 11, 2026, with a response deadline of August 24, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
BATTERY BOX
Solicitation # SPE7L7-26-T-4703
This contract is for the procurement of 10 battery boxes, identified by NSN 6160-01-651-4898 and Miltope Corporation part number 717966. The solicitation, numbered SPE7L7-26-T-4703, specifies a delivery timeline of 210 days after order, with an original required delivery date of October 14, 2026, and a final need ship date of March 20, 2027. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania. Technical and quality requirements are governed by the DLA Master List, with specific adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will occur at the destination, and the contract allows for zero quantity variance.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-15HL
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of three units of BRAN wiring harnesses under part number 0001S00000053. The contract is designated as a total small business set-aside under NAICS code 335311, with a delivery requirement of 351 days after the order is placed. Performance is centered in Tracy, California. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List. Notably, the contract involves covered defense information and is subject to rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training. Inspection and acceptance will occur at the origin, and all packaging must adhere to DLA procurement standards.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-15GM
This contract is for the procurement of four special purpose electrical cable assemblies under solicitation number SPE4A6-26-T-15GM. The items are identified by NSN 6150-01-713-9674 and must be delivered within 20 days after the order. The shipment is designated for the NATO Support Agency NSPA in Luxembourg, with freight handled via D.F. Young, Inc. in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking per MIL-STD-129. Quality assurance will be conducted at the point of origin using sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with cybersecurity standards, specifically CMMC Level 2 self-assessment and covered defense information regulations.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-15GA
This contract is for the procurement of four special purpose electrical cable assemblies, identified by NSN 6150016781651 and part number 941294 from DRS Sustainment Systems, Inc. The solicitation, issued by the Department of Defense ASC Commodities Division, requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is August 11, 2027, with a need ship date of February 7, 2027, and a delivery timeline of 171 days. The agreement mandates strict adherence to several technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific physical identification and marking standards. Packaging and palletization must comply with MIL-STD-129 and DLA procurement requirements. Quality assurance will be managed through a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A1-26-T-2545
This contract is for the procurement of one wiring harness, part number 8531135-920 manufactured by Honeywell International Inc, under NSN 6150-01-545-5267. The solicitation, issued by the Department of Defense Aviation Supply Chain, specifies a delivery timeline of 171 days with a required delivery date of April 5, 2027. The item is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. Compliance requirements include DLA packaging standards, MIL-STD-129 marking, and CMMC Level 2 self-assessment for cybersecurity. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, emphasizing zero non-conformances for acceptance. Additionally, the contract mandates adherence to configuration change management and the removal of government identification from non-accepted supplies, while noting that Item Unique Identification is not required for this specific order.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
POWER SUBSTATION, EL
Solicitation # SPE4A6-26-T-14WJ
This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 13 electrical power substations, identified by NSN 6150-01-720-5828 and Rolls-Royce Solutions America part number X00E50212756. The items are classified as critical application items and must adhere to specific technical and quality requirements, including source approval request documentation and strict sampling methods based on MIL-STD-1916 or ASQ H1331. Delivery is required within 261 days, with an original required delivery date of March 6, 2027, and a final need ship date of May 7, 2027. The shipment is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Diego. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements for procurement.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-2955
The contract solicits quotes for the procurement of two units of a power supply identified by NSN 6130123743665, intended for delivery to the DLA Distribution center at location W1A8 within 126 days after the order date. The solicitation, issued by the Defense Logistics Agency Land and Maritime, operates under solicitation number SPE7L726T2955 and follows NAICS code 335999. Approved manufacturers or sources for the power supply units include specific part numbers from vendors labeled 8W891, C3494, D1901, and F0555. The solicitation process is conducted electronically through an RFQ posted on the DIBBS website, with no physical copies or additional specification documents provided. Interested and responsible vendors may submit electronic quotes that will be considered if received on time, with a submission deadline of May 4, 2026. The procurement does not specify any set-aside type, and the solicitation encourages all capable sources to participate. Questions regarding the solicitation should be directed to the designated buyer via email, with additional information accessible through the DIBBS solicitation portal. The contracting office is based in Columbus, Ohio, reflecting its organizational affiliation with the Department of Defense.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335931
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4517
The contract specifies the procurement of 27 battery chargers with NSN 6130-01-611-6106 and part number WA-25600 from WAMORE, INC, under solicitation SPE7L7-26-T-4517, with a firm delivery deadline of 202 days after award and an original required delivery date of March 1, 2027. All items must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract enforces strict adherence to DLA’s Master List of Technical and Quality Requirements, with specific standards including MIL-STD-1916 or ASQ H1331 for sampling, zero non-conformances required unless otherwise stated, and compliance with MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 unless superseded by higher-priority DLA requirements, and palletization must conform to RP001 packaging guidelines. The unit of issue is each, with all packaging and labeling requirements tied directly to the contract’s specified QUP and U/I. Transportation and shipping instructions direct delivery to the DDSP New Cumberland Facility in Pennsylvania, and all items must be marked in accordance with RQ017 for physical identification. The contract also incorporates DLA’s policies on the removal of government identification from non-accepted supplies and may involve covered defense information under RD003.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, ANGLE
Solicitation # SPE7MC-26-T-189H
This contract is a solicitation for the procurement of six angle valves, specifically identified as Model 40695-501 2 inch Trac style FA back pressure regulating valve assemblies for lube oil service. The items are associated with NSN 4820-01-475-7979 and various Trac Regulator Co. part numbers. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, with delivery set as FOB Origin and inspection and acceptance occurring at the destination. A critical environmental requirement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components as defined by NAVSEA. The delivery timeline is set for 194 days after order, with a required delivery date of March 4, 2027. All shipments are to be directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4698
This contract is for the procurement of two battery chargers under solicitation number SPE7L7-26-T-4698, identified by NSN 6130-01-523-8651. The items are designated as critical application items and are associated with part numbers from Marathonnorco Aerospace and Kratos Unmanned Aerial Systems. Delivery is required within 164 days, with a need ship date of February 2, 2027, and a final required delivery date of April 6, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129, as well as palletization requirements under RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Additional compliance requirements include the removal of government identification from non-accepted supplies and the protection of covered defense information.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
SUIT, SURVIVAL, COLD
Solicitation # SPE86E-26-T-3943
The contract is for the procurement of 700 units of a Survival Cold Suit, identified by NSN 4220-01-251-6466, under Solicitation SPE8E6-26-T-3943, with a total small business set-aside designation. The delivery timeline requires completion within 256 days after award, and all supplies must comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. Documentation requirements include the submission of a Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and each certificate must be uploaded electronically to the iRAPT system as an attachment to the corresponding Receiving Report. For government inspections at source, the COQC must be available for review by the Government representative at the time of material presentation. Packaging must meet DLA requirements, and any non-accepted supplies must have government identification removed prior to return. All data requirements are included in the item price, and the point of contact for this procurement is John Lieb at the Department of Defense’s New Cumberland facility, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002.
All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, CENTRI
Solicitation # SPE8E7-26-T-3442
The contract solicitation SPE8E7-26-T-3442 calls for the procurement of six impellers, fan, centrifugal, identified by NSN 4140-01-559-6034 and part numbers including 2650-3335 and 265386451, sourced from approved vendors such as Hansome Energy Systems Inc and General Dynamics Corp. Delivery is required within 146 days with an original delivery date of May 20, 2028, and a need ship date of January 4, 2027, under FOB Origin terms, with all items to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania. The items must comply with stringent packaging standards per MIL-STD-2073-1E, including cold/dry preservation methods, specific wrap and cushioning materials, and unit container types, with all packaging coded as "U" and adhering to DLA-specific packaging requirements. Marking must follow MIL-STD-129 with a special code of "24 – Open for inspection or use," and each item must bear permanent Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003, including a machine-readable data matrix barcode. The contract incorporates multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, inspection and acceptance at destination, default, changes, subcontracting, safeguarding information systems, transportation by sea, prohibition on hazardous material storage, and contracting authority limitations. The Government retains full inspection and acceptance authority at the delivery point, and invoicing must be processed exclusively through the Wide Area WorkFlow system. Offerors must maintain a current Unique Entity ID and provide accurate size status and socioeconomic representations; no joint venture or small business set-aside is specified. All proposals must be submitted electronically via the DLA Internet Bid Board System by August 10, 2026, with no hard copy submissions permitted. Contract type is undefined but will be designated upon award. Compliance with technical and quality requirements is governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers. Hazardous materials, if included, must be labeled per OSHA Hazard Communication Standard and DFARS 252.223-7001, with pre-award submission
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336611
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-189J
This contract is for the procurement of two butterfly valves under solicitation number SPE7MC-26-T-189J. The items are identified by NSN 4820-01-263-1982 and associated part numbers HAN3030NBZ and HAN3040001 from Emerson Automation Solutions and JA Moody LLC. Delivery is required within 305 days, with a required delivery date of June 23, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the use of Class I ozone-depleting chemicals in the manufacturing or delivery of the items. Inspection and acceptance will take place at the destination. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals used must be submitted for approval unless already authorized by the specifications.
Ship Building and Repairing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7MC-26-T-158B
This contract specifies the procurement of a solenoid valve identified by NSN 4810-01-342-6722, with a quantity of 30 units, under solicitation SPE7MC-26-T-158B, a Service-Disabled Veteran-Owned Small Business Set-Aside. The valve must have a copper alloy body and is designated as a critical application item requiring government engineering source approval due to its restricted sourcing status. Manufacturing may involve casting or forging with specialized tooling, for which the government may not retain ownership, necessitating a formal Casting and Forging Assistance Request for sourcing support. The item is strictly prohibited from containing or coming in direct contact with mercury or mercury compounds, except for specific exempted applications such as functional batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents specified by NAVSEA; where mercury is permitted, portable devices must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with each unit individually packaged using die-cut cushioning to immobilize the valve, prevent puncture, and ensure even weight distribution within the container. The delivery point is FOB origin with inspection and acceptance occurring at destination, and the required delivery window is 161 days from the contract award, with a specified ship date of January 19, 2027. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and must adhere to all DLA packaging and marking standards, including the prohibition of special marking codes.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, LINEAR DI
Solicitation # SPE7MC-26-T-160Z
This contract pertains to the procurement of a Parts Kit for a Linear Directional Control Valve, identified by NSN 4810-01-279-3063 and part number R431005645 manufactured by AVENTICS GMBH. A total of 92 kits are required, with each kit including a detailed parts list specifying component names, numbers, and quantities, and all hardware must be securely contained within sealed individual containers to prevent damage, corrosion, or mixing during transit. Packaging must strictly comply with MIL-STD-2073-1E Appendix D for kits, ensuring the highest applicable preservation method is applied to protect the most critical component, and all items must be packed in a manner that requires no further sorting or repackaging by the recipient. Marking must adhere to MIL-STD-129, with special codes and segregation requirements as defined in the standard, and palletization must follow DLA’s packaging requirements. Delivery is FOB origin, with inspection at destination, and no variance in quantity is permitted. The contract prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for specified exceptions such as batteries, fluorescent lights, instrument sensors, weapon systems, or NAVSEA-approved chemical reagents. Portable fluorescent lamps and instruments containing mercury must include a secondary containment barrier and be shockproof, in compliance with NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The unit of issue is KT (kit), and delivery is scheduled for 988 days after award. The solicitation, issued under SPE7MC-26-T-160Z by the DDSP NEW CUMBERLAND FACILITY, is open for response until August 10, 2026, and further information can be obtained from the designated point of contact at DLA.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7MC-26-T-190C
This contract is for the procurement of 13 bronze body 1 inch globe stop check valves with flanged end connections, identified by NSN 4820012711891 and Hunt Valve Company part number 6204. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is October 19, 2024, with a delivery window of 102 days. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Key environmental and quality restrictions are in place, specifically prohibiting the intentional addition of mercury or the use of Class I ozone depleting chemicals. Inspection and acceptance will occur at the origin, and the contract incorporates technical and quality requirements as set forth in the DLA Master List.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-158N
The contract is for the procurement of five safety relief valves identified by NSN 4820013106508 and part number BASAA05SEE from DANTE VALVE COMPANY, with a total contract value of $5.00 per unit, delivered FOB origin within 70 days of the required delivery date of December 8, 2026. The item is classified as a critical application component, necessitating strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking and unit packaging. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except in specific exempted applications such as functional batteries, fluorescent lamps, sensors, or weapon systems, and any permitted mercury-containing portable lamps or instruments must include a second barrier of containment per NAVSEA 5100-003D. The contract requires compliance with DLA packaging and shipping procedures, including parcel post and freight shipping to the DDSP New Cumberland Facility in Pennsylvania, with no variance allowed in quantity. Tooling may be required for manufacturing and suppliers are directed to submit a Casting and Forging Assistance Request if needed. The solicitation was issued on July 29, 2026, with responses due by August 10, 2026, under solicitation number SPE7MC-26-T-158N, and delivery must be completed by the specified timeline without exception.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details