This Solicitation opportunity from Department Of Defense was posted on August 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
COVER, ELECTRONIC THERM
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of disposable probe covers for Welch Allyn SureTemp thermometers, specified as sterile, latex-free, and packaged in quantities of 250 per unit, with each unit consisting of 10 packs of 25 covers. The item is classified under NSN 6515-01-664-4513 and is subject to FDA regulation, requiring referral confirmation by the contracting official prior to award. The total requirement is for 12 packages—4 packages under CLIN 0001 and 8 under CLIN 0002—with delivery required within 20 days of order placement, FOB destination, to Fort Stewart, Georgia. The unit of issue is the package (PG), and quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Packaging must comply with ASTM D3951, but the DLA Master List of Technical and Quality Requirements takes precedence over all other standards. Marking and labeling must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All shipments must use the fastest traceable means, excluding parcel post, and must be properly marked with the designated military identification and freight details. The contract incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and includes key FAR and DFARS clauses governing contract type, inspection at destination, safety, cybersecurity, export control, and supply chain integrity. Contractors must be registered in SAM and comply with all Representations and Certifications, including size status and restrictions on covered defense telecommunications equipment. The item must be sourced from approved manufacturers—Cardinal Health or Medline Industries—and must meet all technical requirements identified by R or I numbers from the DLA Master List. A Safety Data Sheet must be submitted prior to award, and all contractors must register with DLA’s AMPS system to access the Vendor Shipment Module. Payment will be processed through Wide Area Workflow (WAWF), and the contract is designated as a DX-rated order under the Defense Priorities and Allocations System, making it critical for national defense. All proposals must be submitted via DIBBS no later than August 17, 2026, and failure to comply with any clause may result in disqualification.
General Info
Agency
NAICS
Place of Performance
BLDG 1509 WEST 6TH STREET, FORT STEWART, GA, 31314-5185, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
COVER,ELECTRONIC THERMOMETER PROBE
SURETEMP DISPOSABLE PROBE COVER, FOR
USE WITH WELCH ALLYN SURETEMP
THERMOMETER, 10 PACKS OF 25 COVERS<(>,<)>
STERILE, LATEX FREE, 250S
.
UNIT OF ISSUE PACKAGE, PG, OF 250S
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. .
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.
SPE2DS-26-T-323D
SECTION B
MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CARDINAL HEALTH 200, LLC 07TA6 P/N 5031-750
MEDLINE INDUSTRIES, LP 0PMN3 P/N W-A05031750Z
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017773046 0001 PG 4.000
NSN/MATERIAL:6515016644513
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33RBS
0087 CS BN CO A COMPOSITE
SPE2DS-26-T-323D
SECTION B
PR: 7017773046 PRLI: 0001 CONT’D
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
MARKFOR
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
M/F: (TCN) W33RBS62170121
RDD: 231
PROJ: 9AC TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/10/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017772669 0001 PG 8.000
NSN/MATERIAL:6515016644513
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE2DS-26-T-323D
SECTION B
PR: 7017772669 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
MARKFOR
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
M/F: (TCN) W33RBS62170122
RDD: 231
PROJ: 9AC TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/10/2026
SPE2DS-26-T-323D NSN/Part Number: 6515-01-664-4513 Quantity: 4 PG Purchase Request: 7017772669QTY: 8 Delivery: 20 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS