Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COVER, PROTECTIVE, DU

Active
SPE7M0-26-T-9532Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 2,386 units of a protective dust and moisture seal cover identified by NSN 5340-01-609-1436, under purchase request 7017227164, with a delivery requirement of 180 days after award. The solicitation number is SPE7M0-26-T-9532, posted on July 21, 2026, with responses due by July 24, 2026. It falls under NAICS code 332722 and is managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at New Cumberland, Pennsylvania, ZIP 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition type, and the removal of government identification from non-accepted supplies is mandated. All specifications referenced by R or I numbers are incorporated via the official DLA website. The primary point of contact is Shannon Irwin at DLA, reachable via phone and email.

General Info

Procure 2,386 dust and moisture seal covers, delivery in 180 days, DLA contract, New Cumberland, PA.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M0-26-T-9532 for DLA Maritime Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Shannon IRWIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COVER,PROTECTIVE,DU
COVER,PROTECTIVE,DUST AND MOISTURE SEAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 5340-01-609-1436 Quantity: 2,386 EA Purchase Request: 7017227164QTY: 2386 Delivery: 180 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract pertains to the procurement of 879 units of a machine screw assembly identified by NSN 5305-00-139-8178 and manufacturer part number ABS20642-4F14 from PattonAir USA Inc, categorized as a critical application item and classified as a commercial item with no shelf life requirement. The solicitation, issued under number SPE4A6-26-T-05QR, is a total small business set-aside under NAICS code 332722, with responses due by July 21, 2026, and award anticipated to follow. Delivery is required within 80 days of contract award, with product to be shipped FOB origin to Robins Air Force Base, GA, and acceptance and inspection to occur at the destination. The item must comply with all DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking per RQ017, removal of government identification from non-accepted supplies per RQ011, and packaging standards per RP001 and ASTM D3951, though DLA requirements supersede ASTM where applicable. Packaging must be marked and labeled in accordance with MIL-STD-129, palletized as specified in RP001, and include a quantity per unit pack of 15. Sampling for quality assurance must adhere to MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. Acceptance requires zero non-conformances if MIL-STD-105 or ASQ Z1.4 is utilized. The item is subject to covered defense information requirements under RD003 and must comply with applicable cybersecurity and information safeguarding clauses including 252.204-7012. Contractors must use Wide Area Workflow for invoicing and receiving reports, comply with hazard communication standards for labeling, and affirm compliance with the Berry Amendment and Buy American Act. All offerors must be registered in the System for Award Management, represent their small business status accurately, and avoid providing covered defense telecommunications equipment or services unless exempted. The contract includes clauses on whistleblower rights, combating human trafficking,
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
NUT, IMPELLER, LEFT HANDThe contract specifies the procurement of two left-hand impeller nuts, identified by NSN 5310-01-424-5905 and part number 15-0125-01, manufactured by Buffalo Pumps Inc. and supplied under solicitation SPE4A6-26-T-08ST. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical attributes require zero non-conformances, and unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited in the item, its preservation, packaging, or marking, except for specified functional uses in instrumentation or batteries, which must include secondary containment per NAVSEA 5100-003D. Preservation is to be conducted in accordance with ASTM D3951 using preservation method code 10. Delivery is FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. The delivery window is 171 days from contract award, with a required ship date of January 17, 2027, and the original delivery deadline was October 30, 2026. All logistics and transportation protocols follow DLA procedural notes C19 and C20, and the unit of issue is each (EA) at a unit price of $2.00, totaling $4.00.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW ASSEMBLY, PANELThe contract pertains to the procurement of a screw assembly for panel use with NSN 5305015234800 and part number 114108-.500-SS-SDS-12, sourced from Accurate Screw Machine Corp. A total of 23 units are required under purchase request 7017571666, with delivery mandated within 171 days from the contract award, to be shipped FOB origin to the designated receiving warehouse in Tracy, California. The supply is subject to strict packaging standards per ASTM D3951 and MIL-STD-129, with palletization conforming to DLA packaging requirements, and all packaging must be properly marked and labeled. Inspection and acceptance occur at the destination, with no variance permitted in quantity. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other specifications. Sampling procedures must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with attribute classification and verification levels strictly enforced. The item is classified as proprietary with insufficient technical data for competitive procurement, and covered defense information protocols apply. The unit of issue is each, and transportation logistics follow DLA procedural notes C19 and C20. The solicitation was issued on July 21, 2026, with responses due by July 29, 2026, under contract number SPE4A6-26-T-08DZ.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVETThis contract pertains to a threaded pin-rivet identified by NSN 5320-01-165-4339, designated as a commercial item, and must be manufactured and tested in strict accordance with specification SPE4A6-26-T-821M. It is source-controlled, meaning only vendors with access to the underlying technical data or demonstrable traceability to approved sources may submit quotations. A Source Approval Request (SAR) package is mandatory for any party seeking to become an approved source. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with applicable revisions determined by the type of acquisition and relevant dates. Packaging, inspection, and acceptance procedures follow DLA mandates including RQ001, RQ009, and RQ011, with physical marking of bare items required under RQ017. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. The item is subject to strict export controls under ITAR or EAR, prohibiting any transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce, regardless of location. DFARS 252.225-7048 applies, and only contractors with valid US/Canada Joint Certification Program approval, completed DLA training on export-controlled data handling, and formal DLA authorization may access controlled technical information. Cybersecurity requirements mandate CMMC Level 2 compliance, either through self-assessment or certification by a C3PAO. Covered defense information is protected under RD002, and all documentation must comply with the defined source control and reporting obligations. The solicitation, issued by the Defense Logistics Agency’s ASC Commodities Division, has a response deadline of July 24, 2026, with a delivery requirement of 166 days ADO to Robins AFB, Georgia, for a total of 189 units.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, CONCAVEThe item is a concave washer with NSN 5310-01-654-9319, with a quantity of 40 units required under purchase request 7017522998, and must be delivered within five days of order award. The solicitation is issued under contract number SPE4A6-26-T-08QN, posted on July 21, 2026, with responses due by July 29, 2026. This procurement is managed by the ASC Commodities Division of the Department of Defense with Alison Allen as the primary point of contact. The item is classified under NAICS code 332722 and is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. Disclosure includes access by foreign national employees or foreign subsidiaries of U.S. companies. Only DLA contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire are permitted to access this data. DFARS 252.225-7048 governs compliance.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract is for the procurement of 184 machine screws identified by NSN 5305-01-555-8107 and part number MS35206-267Z, classified as a commercial item. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific standards such as RQ011 for removal of government identification from non-accepted supplies, RQ017 for bare item marking, and RQ042 mandating ISO 9001:2015 compliance for both manufacturers and non-manufacturers. Mercury and mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and labeling must comply with MIL-STD-129 and ASTM D3951, with DLA’s master requirements taking precedence. Palletization must adhere to RP001, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is FOB origin with inspection and acceptance occurring at the destination, and the required delivery date is March 1, 2027, with a need ship date of January 17, 2027. The item is not subject to shelf life restrictions. The contract references applicable standards including NASM35206 Rev 4 and FF-S-92E Rev E and requires compliance with DLA’s packaging and transportation directives, including DLA Proc Notes C19 and C20. The delivery address is the DLA Distribution facility in New Cumberland, PA, and the solicitation, issued under SPE4A6-26-T-08SQ, was posted on July 21, 2026, with a response deadline of July 29, 2026, under NAICS code 332722. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i), and covered
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract specifies the procurement of 525 shear bolts identified by NSN 5306-01-440-3621 and part number NAS6703-25, manufactured to the current revision of the non-government standard NAS6703 through NAS6720 Revision 13 dated April 30, 2026. All hardware must conform to the latest applicable part standard, with previous revisions acceptable only for items produced prior to the solicitation date. The item is classified as a critical application, subject to stringent quality controls including inspection and acceptance at destination under MIL-STD-1916 or an equivalent zero-based sampling plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively. Threads must be inspected per System 22 of FED-STD-H28/20, excluding small self-locking nuts and undersized threads. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, with only limited functional uses allowed under specific exceptions verified by NAVSEA, and portable devices containing mercury must include a secondary containment barrier. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, with each fastener fully protected along its shank and threads by a wrap or sleeve, and all marking conforming to MIL-STD-129 and MIL-STD-130N for identification, excluding any special marking codes. The unit of issue is each, delivered FOB origin with no variance permitted in quantity and a delivery window of 171 days. Packaging is to be palletized in accordance with DLA guidelines, with preservation methods defined as method 10, using preservation material code 00 and drying type 1. The shipping destination and parcel post address are identical, directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The required ship date is January 17, 2027, with an original delivery deadline of March 19, 2027. All quality and testing requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract is managed by the ASC Commodities Division under solicitation SPE4A6-26-T-08NL with Monica Clark as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 41 units of a socket head cap screw, identified by NSN 5305-01-582-3318 and part number AES18C375A00DG5A91, under solicitation SPE4A6-26-T-08FH. The item must conform to technical and quality standards specified in the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking of military property, System 22 of FED-STD-H28/20 for dimensional inspection of Class 3A and 3B threads, and compliance with ASME B18.24-2004. Sampling must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The screw is subject to Critical Item Source Inspection and must be manufactured and inspected per stringent quality assurance protocols applicable to both manufacturers and non-manufacturers. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA Packaging Requirements, and all units must be labeled and marked per contract specifications. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The delivery window is 171 days from the award date, with an original required delivery date of March 6, 2027, and a need ship date of January 17, 2027. The item is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, under the Transportation Procurement Notes C19 and C20. The solicitation was issued on July 21, 2026, with responses due by July 29, 2026, and is classified under NAICS code 332722. Cybersecurity requirements are governed by CMMC Level 2, and the contract incorporates Covered Defense Information protocols. Unit price is $41.00 per piece, resulting in a total contract value of $1,681.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW ASSEMBLY, PANE
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAINThis contract pertains to the procurement of three plain studs, identified by part number 15-4046-PC NO-7 and NSN 5307-01-694-3910, supplied by Gardner Denver Nash LLC. The item is source-controlled, requiring manufacturing and testing in strict compliance with proprietary limited rights data accessible only to approved vendors who can demonstrate traceability to authorized sources. The government does not provide this data, and only qualified vendors with existing access or proven lineage to approved suppliers may submit bids. Item Unique Identification is not mandated per customer request, and the part has no shelf life. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified; unspecified attributes are deemed major with AQL of 1.0. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA-specific packaging requirements. All technical and quality requirements referenced by R or I numbers from the DLA Master List supersede any conflicting standards. Delivery is FOB origin, with inspection and acceptance occurring at destination in 171 days, and no variance in quantity is permitted. The unit price is $3.00 per piece for a total of $9.00. The required delivery date is February 8, 2027, with a need ship date of January 17, 2027. All shipments must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, following specified transportation protocols.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, TANGThe contract is for a single washer, tang, identified by NSN 5310-00-089-4828, under solicitation SPE4A5-26-T-301L, with a required delivery within 20 days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as required. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to JBPHH, HI, 96853-1801. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Anthony Nickens listed as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEADThe contract specifies the procurement of one socket head cap screw with NSN 5305-01-612-6526 under solicitation SPE4A6-26-T-08YU, requiring delivery within ten days FOB origin to Fort Hood, Texas. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. The screw must be free of intentional mercury or mercury compounds unless part of exempted functional items like batteries or sensors specified by NAVSEA, and any portable mercury-containing devices must have shockproof construction and secondary containment. Sampling must follow MIL-STD-1916 or ASQ Z1.4 with zero non-conformances permitted unless otherwise noted, and critical attributes must be verified at the specified levels. The supplier, McMaster-Carr, is identified by part number 91292A121, and the item must be marked per RQ017, with all documentation aligned to RC001 for source approval. Delivery is to be shipped by the fastest traceable means excluding parcel post, with no quantity variance permitted. The contract enforces strict labeling, packaging, and identification protocols including the use of the Unit of Issue and Quantity per Unit Pack per the purchase order, and the item is designated for government use with specific internal tracking codes.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 333914
New
DIBBS
SLEEVE, SHAFT, PUMPThe contract pertains to the procurement of one sleeve assembly for a pump shaft, specifically designated for use with the Worthington 2CNE72 centrifugal pump and identified by the part number 023054-30 under the NSN 4320002941591. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within five days from the origin point under FOB origin terms, with no tolerance for quantity variance. The product must be prepared for shipment in accordance with MIL-STD-2073-1E packaging standards, marked per MIL-STD-129, and packed at level B using code Q with no special marking. Inspection and acceptance occur at the origin, and the item must be palletized following DLA packaging requirements. The delivery destination is King Abdulaziz Naval Base in Jubail, Saudi Arabia, with freight handled by New York Forwarding Services Inc. The solicitation number is SPE7M0-26-T-014A, with a required delivery date of July 23, 2026, and the contract is managed under the Department of Defense’s Maritime Supply Chain ESOc Buys unit, with Grace Beck listed as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, ROTARYThe contract is for a single rotary switch with NSN 5930-01-619-0800, under purchase request 7017559756, requiring delivery within five days after award. The solicitation number is SPE7M0-26-T-015K, issued on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The item is to be delivered to FPO, ZIP 34094, and the contracting office is the Maritime Supply Chain ESOC Buys under the Department of Defense. Primary point of contact is Laurie Wassmuth, reachable via email or phone. The NAICS code is 335313, and the solicitation is classified as federal with no set-aside designation.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
PUMP, CENTRIFUGALThe contract pertains to the procurement of one centrifugal pump with NSN 4320-01-655-3039 and part number 12595511 from BIRDON AMERICA INC, issued under solicitation SPE7M0-26-T-016U. The item is classified as a TYPE 2 (CODE 7) with a 36-month extendable shelf life, requiring strict compliance with MIL-STD-2073-1E packaging standards, including preservation method 31, cushioning material JC, and specific container codes. Delivery must occur within five days of contract award, FOB origin, with no variance allowed in quantity and inspection and acceptance taking place at the destination. The pump must be marked per MIL-STD-129 with no special marking codes and palletized per DLA packaging requirements. Shipping must be conducted via traceable freight, explicitly prohibiting parcel post, to the designated delivery point at Fort Leonard Wood, Missouri, with the shipment reference W58QRC and designated for the USA Engineer School. The required delivery date is July 22, 2026, and the contract is subject to the latest revision of the DLA Master List of Technical and Quality Requirements as of the solicitation issuance date. The point of contact is Grace Beck, and the solicitation was posted on July 21, 2026, with responses due by August 3, 2026.
Fluid Power Pump and Motor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLICThe contract specifies the procurement of one nonmetallic hose with NSN 4720-01-471-4870 and part number 5E-9746, supplied by CATERPILLAR INC, under solicitation SPE7M0-26-T-015B. The item must be delivered within five days to Fort Leonard Wood, Missouri, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with ASTM D3951 and MIL-STD-129 for labeling and marking, with DLA Master List of Technical and Quality Requirements taking precedence over any other standard. The hose must be palletized according to DLA packaging requirements and shipped via traceable freight methods, excluding parcel post. The shipment is designated as RDD3 with no NMCS requirement, and the delivery address is the US Army Engineer School. The required delivery date is July 22, 2026, and the contract includes strict government-specific identifiers and logistics codes for tracking and accountability. The point of contact for inquiries is Abaigael Masterson, and the procurement is managed by the Department of Defense’s Maritime Supply Chain ESOc Buys.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335929
New
DIBBS
SIDE LEFT ELECThe contract pertains to the procurement of five units of SIDE LEFT ELEC with NSN 6145-01-556-7082, under solicitation number SPE7M0-26-T-016N, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, and the place of performance is designated as Texarkana, Texas, with a ZIP code of 75507-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment supersedes it. The offeror must provide a complete data package covering both the approved and alternate parts, as no specific data is currently available. The solicitation was posted on July 21, 2026, with bids due by August 3, 2026, and is categorized under NAICS code 335929. Primary point of contact is Abaigael Masterson, reachable via email and phone listed in the contract data.
Other Communication and Energy Wire Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
WAVEGUIDE ASSEMBLYThe contract is for the procurement of a single Waveguide Assembly with part number R17-3329 and NSN 5985-01-651-9165, manufactured by Microwave Engineering Corporation, under solicitation SPE7M0-26-T-015P. This is a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific compliance to revision E of reference drawing NR 1L4J7 684-8270004 dated 01/10/2018. The item must be produced using limited rights data accessible only to qualified vendors, and a classified drawing will be provided upon award following submission of a completed DD Form 254. The vendor must also achieve CMMC Level 2 self-assessment certification and comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special markings required. The unit of issue is EA, with a fixed quantity of one, and delivery must occur within five days at FOB origin, with inspection and acceptance also occurring at origin. Packaging and shipping must follow hazardous materials guidelines and use traceable freight methods—parcel post is prohibited. The delivery address is Tobyhanna Army Depot, with a required delivery date of July 21, 2026. The item is identified as a government-furnished property with specific tracking identifiers and is subject to cybersecurity and data protection mandates under covered defense information rules.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETALThis contract specifies the procurement of a single nonmetallic hose assembly with part number 4720-01-084-0119, measuring 3/8 inch inner diameter and 28 inches in length, supplied under firm fixed price terms with zero variance allowed in quantity. The item must be delivered within five days after award of order and is subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, with mandatory labeling per MIL-STD-129 and palletization in accordance with RP001 DLA Packaging Requirements. The unit of issue is one each and the item is to be shipped by the fastest traceable means, explicitly excluding parcel post. The delivery address is Logistics Lane, Barksdale Air Force Base, Louisiana, with specific shipping identifiers including RDD 777, PROJ TP 1, and supplier code YAG328. The contract references approved suppliers and part numbers including Danfoss Power Solutions II, LLC and Atkinson Co., Inc., and the government reserves the right to remove identification from non-accepted supplies. All technical and quality specifications cited in the DLA Master List control over conflicting standards. The solicitation number is SPE7M0-26-Q-1084, with a response deadline of July 28, 2026, and a required delivery date of July 20, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335312
New
DIBBS
LINE REACTORSThis contract pertains to the procurement of one line reactor identified by NSN 6110-01-541-7029, with a requirement for delivery within five days of award. The solicitation number is SPE7M0-26-T-015J, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys organization, with performance required in Bremerton, Washington, 98314-5001. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates specific technical and quality controls identified by R or I numbers, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specified exemptions such as functional mercury in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must provide a complete data package covering both the approved part and any alternate part, as no data is currently available for this item. The response deadline is August 3, 2026, and primary point of contact is Rocio Mino at DLA.
Motor and Generator Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
VACUUM PUMP UNIT, ROThe contract is for one vacuum pump unit, part number 93613 and NSN 4310016416459, to be delivered within five days of award under solicitation SPE7M0-26-T-015U. The unit must comply with all DLA packaging requirements outlined in RP001 and be packaged in accordance with MIL-STD-2073-1E using method 31 for preservation, with no cushioning material and a packaging code of U. Marking must follow MIL-STD-129 with no special marking required. The delivery is FOB origin, inspection and acceptance occur at the destination, and no quantity variance is permitted. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials must be approved unless explicitly permitted by specification. The delivery destination is the Carrier Outfitting Material Support Center in Suffolk, VA, and shipment must be sent by the fastest traceable method—parcel post is prohibited. The contract prohibits removal of government identification from non-accepted supplies and is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The required delivery date is July 20, 2026, and the point of contact is Grace Beck of the Department of Defense.
Air and Gas Compressor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
TEST SET SUBASSEMBLThis contract pertains to the procurement of two units of a test set subassembly identified by NSN 4921-01-029-3054 and part number CA70251, under solicitation SPE7M0-26-T-014D. The delivery must occur within five days of order placement, with FOB origin terms and no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 specifications, utilizing approved methods and materials while avoiding plastics where possible, as required by DLA packaging standards. The item is to be delivered to a military facility in Derince, İzmit, Turkey, with freight handled by PTK00A at NUWC Newport, and must be palletized and marked in accordance with all referenced defense standards. The contract prohibits the use of Class I ozone-depleting chemicals and mandates adherence to all technical and quality requirements listed in the DLA Master List, which controls based on the solicitation issue date. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the supplier must ensure compliance with the DLA procurement framework including oversight of government identification removal on non-accepted supplies. The solicitation is issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with a response deadline of August 3, 2026, and an original required delivery date of July 23, 2026. The item is classified under NAICS code 333310 and is subject to federal procurement rules. Special marking is not required, and the unit of issue is each. The point of contact is Audrey Acuna, and the full technical and quality specifications are incorporated by reference through DLA’s official master list. All deliveries are to be coordinated to the specified Turkish military address and governed by the DoD’s authorized unit of issue guidelines. The contract does not permit substitutions without prior approval, particularly for chemicals or packaging materials, and remains binding under all applicable defense acquisition regulations.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TRIGGERThe contract pertains to the procurement of one SWITCH, TRIGGER with NSN 5930-01-177-5707 under solicitation SPE7M0-26-T-014P, with a required delivery within five days of award. The procurement is governed by DLA packaging requirements and includes the application of Covered Defense Information under RD002, alongside mandatory compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 through a self-assessment. All technical and quality requirements referenced in this solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The government mandates the removal of any government identification from non-accepted supplies. The solicitation was posted on July 21, 2026, with responses due by August 3, 2026, and is classified under NAICS code 335313 for electrical equipment manufacturing. The contracting activity is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense, with performance required in Lexington, Kentucky, 40516-9723. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
COUPLING ASSEMBLY, HThe contract is for one unit of a coupling assembly, identified by NSN 4730-01-670-5609 and part numbers 5100006 and 02215, to be delivered within five days of award under solicitation SPE7M0-26-T-016T. The item must comply with technical and quality requirements referenced from the DLA Master List, and is subject to strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Ozone-depleting chemicals are explicitly prohibited, and any substitute materials must be approved unless already authorized by specification. The product has no shelf life requirement, and delivery is FOB origin with zero variance allowed in quantity. The item is to be shipped to Camp Casey in Dongducheon, South Korea, under a RDD 999/NMCS shipment, with transportation governed by DLA procedural notes C19 and C20. The contract mandates use of the DoD authorized unit of issue and specifies delivery must occur by July 17, 2026. All packaging and palletization must adhere to DLA’s procurement packaging requirements, and the supplier must ensure full compliance with all government-directed handling and shipping protocols.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details