Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COVER, TENSIONER ASS

Active
SPE7M2-26-T-5632Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item specified is a COVER, TENSIONER CYLINDER ASSEMBLY with NSN 1720-00-193-8853, for a quantity of seven units, under purchase request 7017439081. Delivery is required within 134 days after award. The procurement is conducted under solicitation SPE7M2-26-T-5632, issued by the Department of Defense’s Nuclear Reactor Program, with performance taking place in San Diego, California. The solicitation was posted on July 14, 2026, and responses are due by July 27, 2026, with Alisha Blanton listed as the primary point of contact. This item is associated with technical data subject to export control under either ITAR or EAR, making its disclosure or transfer to foreign persons—regardless of location—strictly regulated. Unauthorized export, including sharing with foreign nationals within the United States, is prohibited without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory. Contractors must hold an approved US/Canada Joint Certification Program certification, complete mandatory DLA training on handling export-controlled technical data, and pass the DLA Export-Controlled Technical Data Questionnaire to gain access. Distribution is restricted to DLA contractors who meet all these requirements and have received official approval from the DLA controlling authority.

General Info

Seven tensioner cylinder assembly covers for DoD, Delivered in 134 days, export-controlled, DLA-certified contractors only.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-5632 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COVER,TENSIONER ASS
COVER, TENSIONER CYLINDER ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1720-00-193-8853 Quantity: 7 EA Purchase Request: 7017439081QTY: 7 Delivery: 134 days ADO

Similar Contracts

NAICS: 336413
New
DIBBS
TUBE ASSEMBLY, SEAThe contract is for a single unit of a tube assembly designated as part number 89162-501 with NSN 1680-01-614-0936 under solicitation SPE4A7-26-T-573U, requiring delivery within 20 days from the origin point with no variance in quantity. The item must comply with all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-2073-1E and marking requirements in accordance with MIL-STD-129, with no special marking codes applied. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs based on criticality. Packaging must adhere to DLA packaging requirements and be palletized accordingly, with freight shipment directed to Langley Air Force Base and parcel post explicitly prohibited. The delivery is FOB origin, with acceptance and inspection also occurring at origin, and the contract mandates shipment via traceable means. The item falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Aaron Miles as the point of contact and a required delivery date of April 23, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, MOTOR HYThis contract pertains to the procurement of a Parts Kit, Motor Hydraulic, identified by NSN 1650-00-243-7741 and part number 914546 from Eaton Aerospace, LLC, with a total quantity of 78 units to be delivered under solicitation SPE7M4-26-Q-0837. The item is classified as a Critical Application Item and is subject to strict technical and quality controls, including adherence to the DLA Master List of Technical and Quality Requirements, which override all other standards such as ASTM D3951. Compliance with MIL-STD-129 for marking and packaging is mandatory, and palletization must follow DLA Packaging Requirements. The contract imposes a prohibition on Class I ozone-depleting chemicals, requiring any substitutions to be pre-approved, and mandates that all components meet specified verification levels for critical, major, and minor attributes with zero non-conformances expected under sampling plans such as MIL-STD-1916 or ASQ H1331. The contract enforces cybersecurity compliance at CMMC Level 2 through self-assessment, applies Covered Defense Information protocols, and requires configuration change management via Engineering Change Proposals or variance requests. Pricing is firm fixed, with no variance permitted in quantity, and delivery is due in 1600 days from the award date, with FOB origin and inspection and acceptance occurring at destination. Packaging and shipping must comply with RP001 and DLAD procedural notes, with delivery directed to DLA Distribution Depot Hill in Utah. The item is restricted, requiring government engineering source approval prior to procurement, and all technical requirements referenced by R or I numbers are controlled by the latest revision of the DLA Master List in effect at the time of solicitation or amendment. The contract’s point of contact is Helen Davis at the DLA Fluid Handling Division, and the acquisition falls under NAICS code 336413.
FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
RING, PISTONThe contract pertains to the procurement of 10 piston rings with NSN/Part Number 2810-01-361-7889, issued under solicitation SPE4A7-26-R-X917 by the Department of Defense through the Defense Logistics Agency. The requirement is a total small business set-aside, with responses due by July 29, 2026, and delivery expected within 33 days after award. The item is subject to stringent cybersecurity and logistical compliance standards, including mandatory CMMC Level 2 certification for any third-party assessors involved, and adherence to DLA packaging, inspection, and acceptance protocols at origin. Physical identification and bare item marking must conform to specified government standards. Technical data associated with this item is controlled under export regulations, either ITAR or EAR, and may not be shared with foreign persons or entities without explicit authorization from the Department of State or Commerce. Disclosure to foreign nationals within the United States is equally restricted. Only contractors with approved U.S./Canada Joint Certification Program credentials, who have completed required DOD export training and DLA Questionnaire, and have received explicit authorization may access this data. DFARS 252.225-7048 governs all export-control requirements. The contract further incorporates all technical and quality requirements listed in the DLA Master List, with revisions effective as of the solicitation issue date controlling compliance. Contact for inquiries is Angela Haden at the provided email and phone number.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIRCRThis contract specifies the procurement of a structural aircraft plate, part number 16S278-11, with NSN 1560012507270, for delivery of twenty units under solicitation SPE4A7-26-T-573L. The item is designated as a critical application component and must comply with all technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Inspection and acceptance occur at origin, with zero tolerance for quantity variance, and the supplier must adhere to DLA packaging and freight procedures, including palletization and use of the designated freight forwarder, LOGIN FMS LOGISTICS LLC. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and physical identification of the bare item must be performed per RQ017. Sampling follows MIL-STD-1916 or equivalent zero-based plans, with acceptance criteria of zero non-conformances unless otherwise specified. First Article Test is required as a separate line item, with one unit allocated for testing, and no separate charge is assumed unless explicitly cited. The delivery window is 290 days from contract award to Don Muang Air Base, Thailand, for the Royal Thai Air Force, with no option for partial or delayed shipments. Unit of issue is each (EA), and the item does not require unique identification per government request. All compliance is governed by the DLA Master List revision effective on the solicitation issue date, and failure to meet any referenced technical, quality, or cybersecurity standard will result in non-acceptance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
COLLAR, TORQUE, LANDIThe contract pertains to the procurement of ten units of a COLLAR, TORQUE, LANDING GEAR with NSN 1620-01-515-8594 under solicitation SPE4A7-26-T-573P, with a delivery deadline of 365 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to specific packaging standards (RP001), quality conformance inspections (RQ006), and inspection at origin (RQ009), with removal of government identification from non-conforming items required (RQ011). Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. Technical data associated with this item is controlled under ITAR or EAR, prohibiting export without prior authorization from the Department of State or Commerce, including disclosure to foreign nationals within the U.S., and DFARS 252.225-7048 applies. Access to controlled technical data is restricted to DLA contractors with approved JCP certification, completion of DOD export control training, and approval by the DLA controlling authority. The solicitation was posted on July 15, 2026, with responses due by July 23, 2026, under NAICS code 336413, and the point of contact is Brian Kurtz at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details