Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on November 13, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Crash and Salvage Crane Spares Support Package

Closed
N6833526RFI0461Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

General Info

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

Place of Performance

NJ

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Office AddressJOINT BASE MDL, NJ, 08733, USA

Full Description

Show more

THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. THERE IS NO SOLICITATION PACKAGE AVAILABLE. The Naval Air Warfare Center Lakehurst is requesting information pertaining to the procurement of the 4233AS0100-1 Carrier Crash and Salvage Crane (CCSC) and 4234AS0100-1 Amphibious Crash Salvage Crane (ACSC) Spares Support Package. The Spares Support Package is intended to provide spares parts to support entering sustainment phase following the fielding of the CCSC and ACSC cranes.


The Government is requesting information on the availability of the following Part Numbers:


Part Number                 Nomenclature


91127                              POWER UNIT, DIESEL


90078                              WHEEL, PNEUMATIC TIRE


90079                              WHEEL, PNEUMATIC TIRE


90080                              WHEEL, PNEUMATIC TIRE


90837                              CYLINDER ASSEMBLY, ACTUATING, LINEAR


90340                              CYLINDER ASSEMBLY, ACTUATING, LINEAR


90535                              CYLINDER ASSEMBLY, ACTUATING, LINEAR


90620                              CYLINDER ASSEMBLY, ACTUATING, LINEAR


90676                              DRUM, WINCH


94366                              HOOK BLOCK


91573                              VACUUM PUMP UNIT, RECIPROCATING


91574                              PUMP REWORK, IMPLEMENTATION


90554                              ACTUATOR, ELECTROMECHANICAL, ROTARY


90557                              ACTUATOR, ELECTROMECHANICAL, ROTARY


93100                              PUMP UNIT, HYDRAULIC


93101                              MANIFOLD ASSEMBLY, HYDRAULIC


91051                              IN RIGGER


90839                              CYLINDER ASSEMBLY, ACTUATING, LINEAR


91614                              FILTER, RETURN


91366                              ASSEMBLY, ROPE GUID


91367                              ASSEMBLY, ROPE GUID


91150                              ASSY, SEAT


91131                              PEDAL, BRAKE


94213                              TOUCHSCREEN, DATA ENTRY


93005                              ASSY, SENSOR, LNR POS


100851                           VALVE, BOOM EXT, REWO


91549                              MANIFOLD, FRONT BRAKE/BYPASS,


91550                              MANIFOLD, REAR BRAKE/BYPASS,


91552                              MANIFOLD, BALANCING


94164                              VALVE ASSEMBLY, MANIFOLD


91996                              CONSOLE, POWER DISTRIBUTION


91761                              VALVE, INRIGGER, REWO


92408                              TURBOCHARGER


260289                           WIPER BLADE


93262                              SOLENOID, MOTOR


260280                           ASSEMBLY, WINDOW


91822                              CAP RETURN FILTER


91833                              VALVE,BALL,REWORK


91616                              SUCTION STRAINER


91618                              VALVE, BALL


91620                              MAGNET ASSEMBLY


91621                              GAUGE, SIGHT LEVEL


93068                              SNATCH BLOCK


90115                              WIRE ROPE


92846                              LOAD LINK


94365                              LOAD CELL, FORCE-WEIGHT


92134                              ASSY, CABLE, EXTENSIO


90950                              ASSY, SHEAVE, NYLATR


91130                              PEDAL, ACCELERATOR


90945                              COMPUTER SUBASSEMBLY


92135                              FUEL COOLER, HERESI


92772                              SENSOR, PRESSURE


91260                              BATTERY MAINTAINER


92003                              SENSOR, STEERING WHEEL


97080                              RELAY SOLID STATE


73236                              JOYSTICK, SINGLE AX


224222                           DAMPENER, VIBRATION


907917                           SENSOR, LIQUID TEMP


79603                              COMPUTER SUBASSEMBLY


92147                              PAD, STOP


92286                              ADAPTER FITTING


260352                           ASSY, FLOAT VALVE


94404                              VALVE, COUNTER BAL


92411                              ACTUATOR


92315                              CONTROL VALVE


99253                              COMPUTER SUBASSEMBLY


261913                           FAN,SUCTION, 26""


260328                           COIL,24 VDC


92681                              VALVE, PRESSURE OVR


260402                           CARTRIDGE, RELIEF VL


260365                           VALVE, WATER


260401                           CARTRIDGE, VALVE


600891                            BREATHER FUEL TANK


224744                           BREATHER, HYDRAULIC TANK


262020                           BREATHER PUMP DRIVE


The purpose of the request for information is to identify potential contractors capable of supplying the Spares Support Package. It is the Government’s intent to procure adequate quantities of referenced parts to support the CCSC and ACSC after the cranes have been fully fielded.  This RFI is to determine whether there are any contractors capable of supplying the Spares Support Package.


It is requested that information be submitted NO LATER THAN 19 November 2025 to Ms. Gianna Gatto, by electronic mail at: gianna.v.gatto.civ@us.navy.mil. Ms. Gatto may be reached by commercial phone at (732) 323-1270. Respondents are notified that a formal solicitation MAY NOT necessarily result from this RFI. Any comments provided may or may not be included in a formal solicitation. The Government WILL NOT PAY for any information received in response to this RFI nor will the Government compensate any respondent with costs incurred in developing the information provided to the Government. The Government will not release any information marked with a Proprietary legend, received in response to this RFI, to any firms, agencies, or individuals outside the Government without written permission in accordance with the legend.

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 541330
New
Federal
Engineering and Technical Services for Support Equipment Department at NAWCADLKE
Solicitation # N6833527R1000
Solicitation N6833527R1000 is a total small business set-aside for comprehensive mechanical and electrical engineering and technical services to support the Support Equipment Department at the Naval Air Warfare Center Aircraft Division Lakehurst, New Jersey. The scope of work includes the design, development, acquisition, evaluation, sustainment, and logistics of support equipment and aircraft launch and recovery equipment across organizational, intermediate, and depot-level maintenance environments. Technical activities involve utilizing industry-standard design tools such as AutoCAD and LABVIEW, performing avionics fault detection, managing data in platforms like AUTOSERD and SERMIS, and participating in critical design and system engineering reviews. The contract is structured with a five-year period of performance, consisting of one base year and four option years, with a maximum duration of five years and six months. The government will award one task order based on a best-value tradeoff analysis, where technical and past performance factors are significantly more important than cost. Technical evaluation focuses on the understanding of the work and key personnel resumes, the latter of which is a pass/fail requirement that can render a proposal unawardable. A material condition for award is the possession of CMMC Level 2 self-certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to strict cybersecurity standards, including NIST SP 800-171. Proposals must be submitted electronically via the PIEE portal by December 3, 2026, following specific volume and page limit constraints.
Engineering Services

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334513
New
Federal
F/A-18 Fuel Pressure Gage Kit, P/N: 3867AS2060-1
Solicitation # N68335-27-Q-1005
The Naval Air Warfare Center Aircraft Division is soliciting quotes for a Firm Fixed Price contract to procure 70 Fuel Pressure Gage Kits, part number 3867AS2060-1, in support of the F/A-18 E/F program. This procurement is a 100 percent Small Business Set-Aside under NAICS code 334513. Award will be granted to the responsible offeror based on the Lowest Price Technically Acceptable criteria. To be considered technically acceptable, offerors must be registered as a small business in SAM, provide the exact part numbers and quantities, commit to a delivery timeline of 100 days after award, and maintain an acceptable or neutral past performance record in the Supplier Performance Risk System. The technical data package is export controlled and contains Controlled Unclassified Information. To access these documents, offerors must submit a certified DD Form 2345 and proof of CMMC Level 2 self-assessment certification to the point of contact, Devin Hader. Additionally, technically acceptable offerors must have a current NIST SP 800-171 assessment and CMMC Level 2 certification recorded in the Supplier Performance Risk System. All delivered equipment must be new, covered by a manufacturer warranty, and packaged according to ASTM D3951-18 and MIL-STD-129R standards. Following Amendment 0001, the solicitation closing date is extended to October 29, 2026, at 4:00 pm EDT, with all questions due by October 27, 2026.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
Federal
MATS Functional Test Set (FMS)
Solicitation # N6833526Q1183
The Naval Air Warfare Center Aircraft Division is soliciting quotes for a Firm-Fixed-Price contract to manufacture, assemble, inspect, and deliver one MATS Functional Test Set (Part Number 90249, NSN 4920-01-566-8231). This Intermediate Level Peculiar Support Equipment is required to support the V-22 aircraft program, specifically for the Japan Ground Self-Defense Force MV-22B Block C program via Foreign Military Sales. The solicitation, originally numbered N6833526Q1183 and updated to N68335-27-Q-1021, is a 100 percent Small Business Set-Aside under NAICS code 334519. Delivery is required within 26 weeks from the date of award, with inspection and acceptance occurring at the origin. To access the export-controlled Build-to-Print Technical Drawing Package, which contains Controlled Unclassified Information, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 Self-Assessment certification. Award will be granted to the responsible offeror proposing the lowest evaluated price who meets all technical and non-price requirements, including ISO9001 certification and a satisfactory past performance rating in the Supplier Performance Risk System. Proposals must be submitted electronically via email and must include CMMC unique identifiers for any systems processing federal contract information or controlled unclassified information. Packaging and marking must adhere to MIL-STD-129R and MIL-STD-130 standards, with a strict prohibition on loose fill materials and asbestos.
Other Measuring and Controlling Device Manufacturing

POSTED

4 days ago

DEADLINE

in 10 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS