Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Crossarm Weathered Steel

Active
Z4957State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of weathered steel crossarms measuring 4 inches by 4 inches by 9 feet 4 inches, designed for tangent applications and fabricated from ASTM weathering steel in compliance with NES Specification 33-506R4 and Drawing LSK-1254-F. Each crossarm must be accompanied by material certifications verifying the use of certified weathering steel, ensuring structural integrity and corrosion resistance. Deliveries are to be made on open flatbed trucks or trailers without packaging that could compromise handling or inspection upon arrival. Only approved manufacturers including REINKE, SFORMS, THOMAS-B, UNIVERSA, HUGHESB, DIXIE, FALCONS, and DIS-TRAN are eligible to supply these crossarms, and all shipments must fully align with the technical and compliance requirements outlined in the specification. The solicitation, titled Crossarm Weathered Steel with identification number Z4957, was posted on August 10, 2026, with a response deadline of August 14, 2026. Issued by Nashville Electric Service under the Tennessee State and Local Government (SLED) procurement category, the contract is intended for performance in Nashville, Tennessee. Primary contact for inquiries and submissions is Tiffany Caruthers, Procurement Contact, reachable via email at tcaruthers@nespower.com or phone at 615-747-3593. All bids must be submitted through the official vendor portal at the provided UI link, and no set-aside provisions are in effect for this solicitation.

General Info

Procure 4x4x9'4" ASTM weathering steel crossarms per NES 33-506R4, delivery via flatbed, approved vendors only, bid by August 14, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

(1)

Z4957_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / Agency
Tennessee → Nashville Electric Service
View Agency Profile
Office AddressNashville, TN, USA
Contacts
Tiffany CaruthersProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
X-ARM WEATHERED STEEL 4"X4"X9'-4" CROSSARM 4" X 4" X 9'-4" WEATHERING TUBULAR STEEL FOR TANGENT APPLICATIONS. TO BE FABRICATED IN ACCORDANCE WITH THE LATEST VERSION OF NES SPECIFICATION 33-506R4 AND DRAWING LSK-1254-F. MATERIAL CERTIFICATIONS SHALL BE INCLUDED WITH THE SHIPMENT OF POLES TO ENSURE THE MANUFACTURER IS USING AN ASTM WEATHERING STEEL. CROSSARMS TO BE DELIVERED ON AN OPEN, FLATBED TRUCK/TRAILER. Approved Manufacturers and/or Part Numbers: REINKE. SFORMS. THOMAS-B. UNIVERSA. HUGHESB. DIXIE. FALCONS. DIS-TRAN.

Similar Contracts

Same NAICS industry code

NAICS: 332312
New
Federal
LIBERTY SUBSTATION ADOT EXTENSION STEEL POLE STRUCTURESThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of steel pole structures to support the Liberty Substation ADOT Extension project. This procurement falls under NAICS code 332312, indicating it involves the fabrication of structural metal components, specifically steel poles intended for electrical transmission or distribution infrastructure. The project is designed to extend and enhance utility infrastructure in alignment with ADOT requirements, though specific location details for performance are not provided. The contract is currently in the forecasting stage, indicating it is not yet open for bidding but is planned for future release, with a posted date of August 10, 2026. Small business program managers at the agency are the primary points of contact for inquiries, with email addresses provided for further engagement, emphasizing the agency’s focus on small business participation in the upcoming solicitation process.
Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 332312
New
Federal
Bundle 35 B3411 External SheltersThe contract titled Bundle 35 B3411 External Shelters is a forecasted procurement issued by Naval Information Warfare Systems under the Navy Information Warfare Command Atlantic, with a NAICS code of 332312 indicating it pertains to the manufacturing of metal buildings and sheds. The solicitation is posted as a forecast with no specific solicitation number assigned, indicating it is an early-stage notice to provide industry with advance awareness of potential future procurement activity. The place of performance is designated as Charleston, and the sole point of contact for the acquisition is Tyler J. Roberts, who serves as both the primary and secondary contracting officer, reachable via the email address tyler.j.roberts53.civ@us.navy.mil. The contract opportunity is published on the Navy’s procurement portal, and while details such as set-aside status, funding, or delivery timelines are not specified, the notice aims to inform potential vendors of an anticipated requirement for external shelters, likely to support naval infrastructure or operational needs.
Niwc Atlantic

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 332312
New
Federal
PALLET RACKING COMPThe contract titled "PALLET RACKING COMP" is a forecast opportunity posted on May 25, 2026, by the Department of Justice under the Inc Federal Prison Industries agency. This procurement is designated as a Small Business Total Set-aside, signaling that only small businesses are eligible to compete for the contract. The contract falls under the NAICS code 332312, which pertains to fabricated structural metal manufacturing. The work is expected to be performed in Green Bay, Wisconsin. Key contacts for this contract include Stacey Phipps, who serves as the primary point of contact, and Robert L. Connolly, the Small Business Point of Contact, providing assistance to small business vendors interested in bidding. Additional details and updates about this opportunity can be accessed through the Department of Justice's official contracting forecast website. The contract aims to support the department’s operational needs related to pallet racking systems through a competitive process limited to small business entities.
Inc Federal Prison Industries

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 332312
New
DIBBS
Marine Structural Metal Door Fabrication and AssemblyThe contract entails the fabrication and assembly of a marine-grade structural metal door in accordance with military technical drawings, requiring precision steel construction, full hardware installation, and surface finishing that meets rigorous military compliance standards. The work must ensure durability and performance in harsh maritime environments, with all components and finishes adhering to specified military specifications for corrosion resistance, structural integrity, and operational reliability. The solicitation is issued as a subcontract under NAICS code 332312, with a response deadline of August 21, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting entity is the Fluid Handling Division within the Department of Defense, indicating this effort supports naval or maritime defense systems. There is no set-aside designation, and the opportunity is open to qualified subcontractors capable of delivering military-grade marine doors meeting exacting technical and quality requirements.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
Self-Drilling Screw SupplyThe contract calls for the supply of five self-drilling screws, part number 90822A350 and national stock number 5305015613885, which must fully comply with applicable federal material specifications. The items are required to meet stringent military-grade standards and are intended for use within Department of Defense operations. The solicitation is issued under the NAICS code 332312, which classifies the procurement within the screw, bolt, and fastener manufacturing sector, indicating the technical precision and regulatory adherence expected from the supplier. Issued by the ASC Commodities Division under the Department of Defense, the contract is structured as a subcontract with a response deadline of August 18, 2026, and was posted on August 10, 2026. The place of performance is designated as FPO with ZIP code 96667-2610, suggesting delivery to a military postal address, likely supporting overseas or mobile operations. The contract is accessible via the DIBBS platform, and while no specific set-aside or point of contact is identified, adherence to federal compliance and timely delivery are critical for successful award and fulfillment.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332312
New
DIBBS
DOOR, METAL, MARINE STRU
Solicitation # SPE7M4-26-T-328U
The contract pertains to the procurement of a single metal marine structural door identified by NSN 2040-00-912-6167, to be delivered within 164 days of order placement with an original required delivery date of June 27, 2027. The door is specified as an interior unit without fixed light or hasp assembly, featuring an RH low type steel hinge assembly, with grab handles designated as PC 37B on the inside and PC 36B on the outside. Required components include label plate piece 32B and gasket piece 31A, and the surface finish must conform to Note 47 of drawing 2226372. The primary referenced drawing is 167-7379216, supplemented by additional technical drawings dated between 2004 and 2020. The item is subject to strict export controls under ITAR or EAR, requiring compliance with DFARS 252.225-7048; technical data cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce, and access is restricted to DLA contractors with approved JCP certification, completed training, and explicit authorization. The contract mandates adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA-specific packaging requirements and a special marking code of 00 indicating no special marking. Inspection and acceptance are designated at origin, with sampling procedures governed by MIL-STD-1916 or ASQ H1331 Table 1 using attribute verification levels of VII, IV, and II for critical, major, and minor characteristics respectively; unspecified attributes are deemed major. The solicitation explicitly prohibits items produced using additive manufacturing and disallows small business set-asides, though HUBZone price evaluation preference applies unless waived. The contractor must maintain current representations in SAM, certify small business status if applicable, and comply with all federal and DFARS clauses including safeguarding covered defense information under DFARS 252.204-7012, NIST SP 800-171 assessment requirements under DFARS 252.240-7997, prohibition of hexavalent chromium, trafficking in persons, employment eligibility verification, and sustainable products. Payment and invoicing will
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
SLED
Manufacture and Supply of Portable Litter Fences
City of Redding

POSTED

about 17 hours ago

DEADLINE

in 21 days
View Details
NAICS: 332312
New
SLED
Reinforcing Steel Supply
City of Austin

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332312
New
Federal
Supply of SUEX Aluminum Transport Boxes (L&R)
Naval Surface Warfare Center

POSTED

about 21 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332312
New
Federal
Structural Steel Fabrication and Installation
W2SD Endist New England

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
Federal
EOU Sunshades Creech AFB
Solicitation # F4FANG6133A001
The contract for the Experimental Operations Unit at Creech AFB requires the design, fabrication, and construction of four new CCA shade structures on the south ramp of the airfield parking apron, alongside the relocation of four existing sunshades and the demolition of a fifth. Each new structure must accommodate four aircraft parking bays and include integrated LED lighting with conduit and CU wiring, service power outlets, a service panel with Una-strut support, and a solar battery-powered obstruction light. The structures must be powered by a photovoltaic array with a 12-hour battery backup, and all materials must comply with stringent environmental and structural standards, including wind load resistance of 110 MPH, corrosion-resistant fasteners, zinc chromate primer, and Frazee Paint #213 Travatan for desert durability. Structural design and construction must adhere to UFC 3-301-01, ASCE 7-16, IBC 2018, ANSI/AISC 441, and ASTM F3125, with engineering submissions requiring approval from the Engineer of Record. All work must be completed within a 210-day period, divided into a 90-day design phase and a 120-day construction phase per structure, with delivery and acceptance occurring at Creech AFB under FOB Destination terms. The solicitation is a Total Small Business Set-Aside under NAICS code 332312 and follows a Lowest Price, Technically Acceptable (LPTA) evaluation methodology, where price is the primary determinant among technically compliant offers. Offerors must be registered in SAM, provide a valid UEI and CAGE code, and certify their small business status under FAR 52.219-1 and its alternates. All personnel must undergo security screening, complete base training, and adhere to strict airfield restrictions including no access to active runways, mandatory FOD sweeps, and no photography without authorization. Invoicing must be processed via WAWF, and the contractor is required to submit detailed documentation including 35%, 65%, 95%, and 100% design drawings, as-built AutoCAD and PDF files, redline revisions, an O&M manual compliant with ASTM standards, and FAA Form 7460-1 submissions. Warranties must cover five years for construction, 40 years for materials, and 25 years for appearance. Proposals must be submitted electronically by
FA4861 99 Cons Lgc

POSTED

about 21 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
SLED
Crash Cushion Supply and Installation (TL-3)
California Department of Transportation

POSTED

1 day ago

DEADLINE

in 30 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 335313
New
SLED
Fuse Holder
Solicitation # Z4969
The contract pertains to a fuse holder assembly specifically designed for capacitor banks operating at 69,000 volts, used at four locations: North, Radnor, South, and West. The approved part for this assembly is the COOPER FN11B1, and only this manufacturer’s component is accepted for compliance. The solicitation, issued by Nashville Electric Service under solicitation number Z4969, is targeted at suppliers capable of providing this critical electrical component for high-voltage infrastructure. The solicitation was posted on August 10, 2026, with a firm response deadline of August 13, 2026, at 7:00 PM Eastern Time. This procurement falls under the state and local government (SLED) category, with performance required in Nashville, Tennessee. All bids must be submitted through the vendor portal linked to the solicitation, and inquiries should be directed to the primary point of contact, K. Kegley, via email or phone provided.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 315990
New
SLED
Lift Harness
Solicitation # Z4965
The contract is for a one-size-fits-most aerial lift harness featuring an H-style full body design with a 3-inch back ring, constructed from durable nylon webbing and equipped with pass-through friction buckles and an adjustable chest strap. The harness must meet ASTM and OSHA safety standards, and only specific approved manufacturers and part numbers—BUCKNGHMU64A23H6E00 and BASHLIN662AD-O—are acceptable for compliance. This solicitation, titled Lift Harness and identified by number Z4965, was posted on August 10, 2026, with a response deadline of August 17, 2026, at 7:00 PM. The solicitation is issued by Nashville Electric Service under the Tennessee state government, with performance required in Nashville, Tennessee. All proposals must be submitted through the vendor portal linked in the posting, and inquiries should be directed to the primary procurement contact, K Kegley, via email or phone provided.
Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 316990
New
SLED
Gloves
Solicitation # Z4964
The contract solicits X Large premium grain cowhide driver gloves with the Gunn pattern and shirred elastic cuff, specified as GLOVE LEATHER XL ALL COW PREMIUM GRAIN LEATHER DRIVERS GLOVE, with approved part numbers BEARKNUGL-338-XL, KUNZGL556-XL, and YOUNGSTO11-3255-60-XL. The solicitation is issued under number Z4964 by Nashville Electric Service, a state, local, and education agency based in Nashville, Tennessee, with performance required locally in the same city and state. The solicitation was posted on August 10, 2026, and responses must be submitted by August 17, 2026, at 7:00 PM local time. Procurement inquiries should be directed to K. Kegley at kkegley@nespower.com or 615-747-3572. The solicitation is accessible via the vendor portal at the provided URL, and no set-aside classification or NAICS code is specified, indicating an open competition for qualified suppliers.
Other Leather and Allied Product Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423460
New
SLED
Safety Glasses
Solicitation # Z4960
The contract solicits safety glasses meeting ANSI Z87.1 standards, with two specified variants: silver mirror and brown flash mirror, both featuring anti-scratch coatings. Approved part numbers include BOUTON250470005, CROSSFIR263, and CROSSFIR29117, and the quantities required are 960 units total, with two distinct item numbers listed for the two mirror types. The procurement is issued by Nashville Electric Service under solicitation number Z4960, with a response deadline of August 13, 2026, and a posting date of August 10, 2026. The solicitation is classified under a SLED agency type, with performance and administrative responsibilities centered in Nashville, Tennessee. Contact for procurement inquiries is K Kegley, reachable via email and phone provided. All supplied glasses must strictly comply with ANSI Z87.1 safety requirements to qualify for award.
Ophthalmic Goods Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
SLED
Line Block
Solicitation # Z4963
The contract solicits a line block with a 3-inch sheave mounted on ball bearings to ensure minimum friction, designed to accommodate rope up to 5/8 inch in diameter. The unit must include a safety hook and a swivel eye, feature a side-opening design for ease of use and installation, and be sourced from approved manufacturers or part numbers Hastings 3550 or SHERMHLB-472. The solicitation is issued by Nashville Electric Service under the state of Tennessee, targeting public sector procurement through a SLED agency classification, with responses due by August 13, 2026, at 7:00 PM local time. All proposals must be submitted through the vendor portal linked in the solicitation, and inquiries should be directed to the primary procurement contact, K Kegley, via email or phone provided. The place of performance is Nashville, Tennessee, with no specific set-aside type indicated.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332312
New
SLED
Steel Poles
Solicitation # Z4959
The contract solicits the supply of 65-foot steel poles with a minimum capacity of 65 ft-kips at ground level, meeting the structural equivalence of Class H3 standards. Each pole must be hot dipped galvanized in full compliance with ASTM A123 to ensure long-term corrosion resistance and durability under environmental exposure. All fabrication details, including drilling patterns and engineering specifications, must adhere strictly to the most current version of the NES Specification LSK-1212 to guarantee uniformity and compatibility with existing infrastructure. The poles must be sourced exclusively from approved manufacturers, with acceptable part numbers including CHM65H3, TAPP65H3, DIS-TRAN65H3, FTWORTH65H3, MDHENRY65H3, ROHN65H3, SABRECO65H3, V&SSCHU65H3, and VALMONT65H3, ensuring proven performance and regulatory compliance. The solicitation is issued by Nashville Electric Service under reference number Z4959, with a posted date of August 10, 2026, and a firm response deadline of August 21, 2026. It is categorized as a state and local government procurement, with performance located exclusively in Nashville, Tennessee. Procurement inquiries and submissions must be directed to Tiffany Caruthers, the designated procurement contact at tcaruthers@nespower.com. Interested parties must submit proposals through the official vendor portal at the provided URL before the stated deadline, ensuring full adherence to all technical, material, and compliance requirements outlined in the solicitation.
Fabricated Structural Metal Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 424350
New
SLED
Flagman Vest
Solicitation # Z4962
The contract solicits the Flagman Vest, a Class 3 Level 2 arc-rated safety vest meeting ANSI/ISEA 107 standards, in size XL with a lime-yellow summer-weight woven mesh construction. The vest features a zipper front closure, orange trim, and segmented heat-transfer reflective tape for enhanced visibility, along with two chest pockets and two inside hip pockets on each side. It must bear a single-color NES logo in black ink. Only approved manufacturers with the specific part number ESTEXMF1616L-FR3Z4P-XL are acceptable. The solicitation is issued by Nashville Electric Service under solicitation number Z4962, targeting state and local government procurement, with responses due by August 14, 2026, at 7:00 PM CT. The contract is tied to performance in Nashville, Tennessee, and all inquiries should be directed to the primary procurement contact, K. Kegley, via phone or email provided.
Clothing and Clothing Accessories Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 423840
New
SLED
Hand-Line Hook
Solicitation # Z4967
The solicitation seeks a hand-line hook rated for 500 pounds, featuring a 3/8 inch diameter, an overall length of 6 and a half inches, and designed with two eyes for secure attachment. Approved manufacturers include BASHLIN with part number S35H and TALLMAN with part number 258, ensuring compliance with specified mechanical and safety standards. This item is intended for use in utility operations requiring reliable and durable equipment for manual handling tasks. The contract, identified by solicitation number Z4967, was posted on August 10, 2026, with responses due by August 14, 2026, at 7:00 PM. The procuring entity is Nashville Electric Service, a state and local government agency based in Nashville, Tennessee. All performance is expected to occur in Nashville, TN, and inquiries should be directed to K. Kegley, the primary procurement contact, via phone at 615-747-3572 or email at kkegley@nespower.com. The solicitation is accessible through the vendor portal at the provided UI link.
Industrial Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 339940
New
SLED
Tool Holder
Solicitation # Z4966
The contract requires the supply of aHOLDER TOOL AERIAL 3 POCKET AERIAL TOOL HOLDER with exact dimensions of 35x14x8 inches, constructed from hard plastic and featuring three large pockets with steps and two bit pockets lined with one-inch inside diameter PVC. Only approved manufacturers and part numbers are accepted, specifically AMERISA SKU-011 and GLOBAL B011. The solicitation is issued by Nashville Electric Service under solicitation number Z4966, with a posted date of August 10, 2026, and a response deadline of August 18, 2026, at 7:00 PM. The procurement is categorized under SLED and the place of performance is in Nashville, Tennessee. All inquiries and submissions must be directed to the primary point of contact, K Kegley, via email at kkegley@nespower.com or phone at 615-747-3572, and submissions are to be made through the vendor portal at the provided uiLink.
Office Supplies (except Paper) Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
New
SLED
Universal Hotstick
Solicitation # Z4961
The contract calls for the procurement of Universal Hot Sticks measuring 40 feet in length, constructed with round tubular fiberglass sections featuring Sure-Lock joints and a disconnect hook. Each section must include a position indicator running the full length of the stick and a numerical measuring system for precise depth and reach verification. The product must fully comply with all applicable OSHA and ASTM safety standards to ensure operational reliability and worker protection. Only approved manufacturers and part numbers—UTILITYUSTS-40-EM and HASTINGSEV-40—are acceptable for bid submission. The solicitation, identified by number Z4961, was posted on August 10, 2026, with a response deadline of August 14, 2026, at 7:00 PM. It is issued by Nashville Electric Service under the Tennessee state agency, with performance occurring in Nashville, TN. The procurement is categorized under SLED and is open to qualified vendors through the official vendor portal. All inquiries and submissions must be directed to the primary point of contact, K. Kegley, reachable via phone at 615-747-3572 or email at kkegley@nespower.com.

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 423610
New
SLED
Adapter, Terminal, PVC Thermoplastic
Solicitation # Z4956
The contract is for an Adapter, Terminal, PVC Thermoplastic designed for a 2-inch diameter conduit with an actual outside diameter of 2.375 inches. Approved manufacturers include SEDCO, CAN-TEX, CARLONE, and ALLIED, with specific part numbers such as PICOMAME943J and ALLIED59620 required for compliance. The solicitation number is Z4956, issued by Nashville Electric Service under the state of Tennessee, targeting state, local, and educational (SLED) government procurement. The solicitation was posted on August 10, 2026, with a response deadline of August 14, 2026, at 7:00 PM Eastern Time. The place of performance is Nashville, Tennessee, and the primary point of contact for procurement inquiries is Tiffany Caruthers, reachable via email at tcaruthers@nespower.com or by phone at 615-747-3593. Further details and submission instructions can be accessed through the vendor portal at the provided uiLink.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332215
New
SLED
Slotted Socket
Solicitation # Z4968
The contract solicits a slotted impact socket that is a 3-in-1 design with 9/16 inch and 3/4 inch sizes, featuring a 12-point deep socket configuration and a 1/2 inch drive, engineered specifically to withstand high torque demands of impact drivers. The product must meet rigorous performance standards to ensure compatibility and safety under heavy-duty industrial use, with only the approved part number KLEIN66031 accepted. The solicitation is issued by Nashville Electric Service under solicitation number Z4968, targeting suppliers capable of delivering industrial-grade tools that meet precise engineering requirements for reliability in electric utility applications. The solicitation was posted on August 10, 2026, with responses due by August 13, 2026, and is open to vendors serving state, local, and education government entities. Performance must occur within Nashville, Tennessee, and the primary point of contact for procurement inquiries is K. Kegley, reachable via email at kkegley@nespower.com or by phone at 615-747-3572. Additional details and submission guidelines are available through the vendor portal link provided by Nashville Electric Service.
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details