Crossman CH2009S JROTC Air Rifles

GENERAL INFORMATION The 42nd Contracting Squadron, 50 LeMay Plaza, Bldg 804, Maxwell AFB, AL has a requirement to purchase items as described in this document. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This requirement is issued as a Request for Quote (RFQ) (Reference-Number F2XJA78200AW02). The solicitation document and incorporated provisions and clauses are those in effect the Federal Acquisition Circular 2005-100 (22 Aug 18) and the DPN 20180824 effective 24 Aug 18. A Firm Fixed Priced Award will be made in accordance with the following: NAICS Code: 332994; size standard: 1,000 employees The Defense Priorities and Allocations System rating is C9E. IMPORTANT NOTES: 1. ALL PRODUCTS MUST BE NEW; NO REFURBISHED OR USED ITEMS WILL BE ACCEPTED. 2. THIS SOLICITATION IS BEING ISSUED FOR THE AWARD OF A FIRM-FIXED PRICE (FFP) INDEFINITE DELIVERY-INDEFINITE QUANTITY (IDIQ) CONTRACT. NATURE OF ACQUISITON: The Holm Center on Maxwell AFB, AL has a requirement to purchase the below listed items outlined in CLINS 0001 - 0005 which include the base year plus four (4) option years. This procurement will be awarded under Simplified Acquisition Procedures using Full and Open competition as a Brand Name requirement (see attached justification). All inquiries/responses to this notice must be received by 24 September, 2018, 14:00 p.m CST. SCHEDULE OF SUPPLIES/SERVICES: This acquisition is for the purchase of the following items: CLIN 0001: Crosman CH2009S Air Rifle Quantity: - 100 Each (est) POP: 27 Sep 2018 - 26 Sep 2019 (Base Year) CLIN 0002: Sling (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2018 - 26 Sep 2019 (Base Year) CLIN 0003: Handstop Swivel (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2018 - 26 Sep 2019 (Base Year) CLIN 0004: Bipod (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2018 - 26 Sep 2019 (Base Year) CLIN 0005: Air Tank capable of filling the air resevoir of the rifle for compressed air use Quantity: 20 Each (est) POP: 27 Sep 2018 - 26 Sep 2019 (Base Year) CLIN 1001: Crosman CH2009S Air Rifle Quantity: - 100 Each (est) POP: 27 Sep 2019 - 26 Sep 2020 (Option Year 1) CLIN 1002: Sling (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2019 - 26 Sep 2020 (Option Year 1) CLIN 1003: Handstop Swivel (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2019 - 26 Sep 2020 (Option Year 1) CLIN 1004: Bipod (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2019 - 26 Sep 2020 (Option Year 1) CLIN 1005: Air Tank capable of filling the air resevoir of the rifle for compressed air use Quantity: 20 Each (est) POP: 27 Sep 2019 - 26 Sep 2020 (Option Year 1) CLIN 2001: Crosman CH2009S Air Rifle Quantity: - 100 Each (est) POP: 27 Sep 2020 - 26 Sep 2021 (Option Year 2) CLIN 2002: Sling (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2020 - 26 Sep 2021 (Option Year 2) CLIN 2003: Handstop Swivel (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2020 - 26 Sep 2021 (Option Year 2) CLIN 2004: Bipod (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2020 - 26 Sep 2021 (Option Year 2) CLIN 2005: Air Tank capable of filling the air resevoir of the rifle for compressed air use Quantity: 20 Each (est) POP: 27 Sep 2020 - 26 Sep 2021 (Option Year 2) CLIN 3001: Crosman CH2009S Air Rifle Quantity: - 100 Each (est) POP: 27 Sep 2021 - 26 Sep 2022 (Option Year 3) CLIN 3002: Sling (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2021 - 26 Sep 2022 (Option Year 3) CLIN 3003: Handstop Swivel (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2021 - 26 Sep 2022 (Option Year 3) CLIN 3004: Bipod (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2021 - 26 Sep 2022 (Option Year 3) CLIN 3005: Air Tank capable of filling the air resevoir of the rifle for compressed air use Quantity: 20 Each (est) POP: 27 Sep 2021 - 26 Sep 2022 (Option Year 3) CLIN 4001: Crosman CH2009S Air Rifle Quantity: - 100 Each (est) POP: 27 Sep 2022 - 26 Sep 2023 (Option Year 4) CLIN 4002: Sling (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2022 - 26 Sep 2023 (Option Year 4) CLIN 4003: Handstop Swivel (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2022 - 26 Sep 2023 (Option Year 4) CLIN 4004: Bipod (Compatible with the rifle) Quantity: 100 Each (est) POP: 27 Sep 2022 - 26 Sep 2023 (Option Year 4) CLIN 4005: Air Tank capable of filling the air resevoir of the rifle for compressed air use Quantity: 20 Each (est) POP: 27 Sep 2022 - 26 Sep 2023 (Option Year 4) Pursuant to clause 52.216-22 paragraph b, the Government intends to order a minimum of 40 units under CLINs 0001 through 0004 and a minimum of 8 units under CLIN 0005 during the first year. DELIVERY INFORMATION Delivery Address: Material Distribution Center ATTN: Recruiting and Education Material Maxwell AFB/ Gunter Annex 50 South Turner Blvd Bldg 832 Warehouse Montgomery, AL 36118-5643 Shipping will be FOB Destination QUOTATION PREPARATION INSTRUCTIONS To ensure timely and equitable evaluation of quotes, offerors must comply with instructions contained herein. Quotes must be complete, self-sufficient, and respond directly to the requirements of this RFQ. a. The offeror must submit dated quote with unit prices and extended prices in response to this solicitation. In doing so and without taking any exception to the requirements of this synopsis/solicitation, including specification, "Schedule of Supplies/Services", and terms and conditions, the offeror accedes to all solicitation requirements. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. b. Offerors must include a completed copy of the provisions at FAR 52.212-3, Alternate I, Offeror Representations and Certifications - Commercial Items. The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site. c. Interested parties capable of providing the requirement must submit a written quote to include discount terms, tax identification number, cage code, and DUNS. d. To be eligible to receive an award resulting from this RFQ, contractors must be registered in the DoD Systems for Award Management database, no exceptions. To register, please visit http://www.sam.gov or by calling +1 (555) 000-0000. e. Manufacturer Specifications: The contractor shall provide detailed manufacturer specifications that clearly meet the minimum requirements outlined in the Statement of Requirements. Manufacturer specifications (i.e. product information, brochures) must be included to clearly corroborate how all minimum requirements would be met by the offeror's quote. f. Delivery: The offeror shall propose a realistic delivery timeline (based on days after date of order) for the requirements identified in this solicitation. The timeline shall take into consideration availability, ordering, shipping and any other factors that could affect the delivery of the item (s) being proposed under this solicitation. The timeline shall be incorporated into the contract and any subseqent delivery orders. g. Responses to this notice shall be provided in writing via e-mail to SrA Bobby Ballow at contact@example.gov and Mark Restad at contact@example.gov. All responses shall be received NLT 14:00 PM CST on 21 September 2018. Email is the preferred method. Points of Contact: SrA Bobby Ballow, Contracting Specialist; Phone +1 (555) 000-0000, Fax +1 (555) 000-0000 and Mark Restad, Contracting Officer, Phone +1 (555) 000-0000. IMPORTANT NOTE: Multiple Offerors nor Multiple Awards will be considered. A single award will be made in the resultant contract. BASIS FOR AWARD This will be a competitive best value acquisition utilizing FAR 13.5, Simplified Procedures for Certain Commercial Items. Award will be based on technical acceptability and price. For quotes determined technically acceptable, a best value selection will be based on price. 1. Technical Acceptability: Initially, the Government shall evaluate each offer's quote, as it pertains to the following criteria, on a pass/fail basis, by assigning ratings of Acceptable (clearly meets minimum requirements) or Unacceptable (does not clearly meet minimum requirements). Manufacturer Specifications: The offeror provided detailed manufacturer specifications will be evaluated for completeness to ensure the offeror meets the minimum requirements outlined in the Statement of Requirements. In particular, the offeror must propose the Crosman CH2009S Air Rifle. The proposed accessories must be compatible with the Crosman CH2009S Air Rifle. 2. Price. The Government may use any of the following price analysis techniques IAW FAR 13.106-3(a) to determine price reasonableness: competitive quotes, comparison of the proposed price with prices found reasonable on previous purchases, a comparison with similar items in a related industry, comparison to an independent Government estimate, or any other reasonable basis. CONTRACT TERMS AND CONDITIONS: The following clauses apply: By reference: FAR 52.202-1, Definitions (Nov 2013) FAR 52.203-3, Gratuities (Apr 1984) FAR 52.203-6 Alt 1, Restrictions on Subcontractor Sales to the Government (Sep 2006) FAR 52.203-12, Limitation on Payments to Influence Certain Federal Transactions (Oct 2010) FAR 52.203-17, Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights (Apr 2014) FAR 52.204-4, Printed or Copied Double-Sided on Postconsumer Fiber Content Paper (May 2011) FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) FAR 52.204-13, System for Award Management Maintenance (Oct 2016) FAR 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) FAR 52.209-6, Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) FAR 52.209-10, Prohibition on Contracting With Inverted Domestic Corporations (Nov 2015) FAR 52.212-4 ,Contract Terms and Conditions -- Commercial Items (Jan 2017) FAR 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) FAR 52.219-8, Utilization of Small Business Concerns (Nov 2016) FAR 52.219-28, Post Award Small Business Program Representation (Jul 2013) FAR 52.222-19, Child Labor - Cooperation with Authorities and Remedies (Jan 2018) FAR 52.222-22, Previous Contracts and Compliance Reports (Feb 1999) FAR 52.222-37, Employment Reports on Veterans (Feb 2016) FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) FAR 52.232-33, Payment by Electronic Funds Transfer- System for Award Management (Jul 2013) FAR 52.232-39, Unenforceability of Unauthorized Obligations (Jun 2013) FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) FAR 52.233-3, Protest after Award (Aug 1996) FAR 52.233-4, Applicable Law For Breach Of Contract Claim (Oct 2004) FAR 52.242-13, Bankruptcy (Jul 1995) DFARS 252.203-7000, Requirements Related to Compensation of Former DoD officials (SEP 2011) DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights (SEP 2013) DFARS 252.204-7003, Control of Government Personnel Work Product (APR 1992) DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (Oct 2016) DFARS 252.209-7004, Subcontracting with Firms that are Owned or Controlled by the Government of A Country that is A State Sponsor of Terrorism (Oct 2015) DFARS 252.223-7008, Prohibition of Hexavalent Chromium (Jun 2013) DFARS 252.225-7012, Preference for Certain Domestic Commoddoties (Dec 2017) DFARS 252.225-7048, Export Controlled Items (June 2013) DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (JUN 2012) DFARS 252.232-7010, Levies on Contract Payments (Dec 2006) DFARS 252.243-7001, Pricing of Contract Modifications (DEC 1991) DFARS 252.243-7002, Requests for Equitable Adjustment (Dec 2012) DFARS 252.244-7000, Subcontracts for Commercial Items (JUN 2013) DFARS 252.247-7023, Transportation of Supplies by Sea (APR 2014) By Full Text: FAR 52.212-5, CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (DEVIATION 2013-O0019) (NOV 2017) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17. (iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (v) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246). (vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (viii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). (ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212). (x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67). (xii) __X__ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). ___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627). (xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.) (xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67) (xv) 52.222-54, Employment Eligibility Verification (Oct 2015). (xvi) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658). (xvii) 52.222-62, Paid sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). (xviii) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a). (B) Alternate I (Jan 2017) of 52.224-3. (xix) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xx) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xxi) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) FAR 52.216-19, Order Limitations (Oct 1995) (a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than 5 for CLINs X001, 5 for CLINs X002, 5 for CLINs X003, 5 for CLINs X004, and 1 for CLINs X005), the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract. (b) Maximum order. The Contractor is not obligated to honor -- (1) Any order for a single item in excess of 100. (2) Any order for a combination of items in excess of 420 or (3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section. (c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section. (d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source. (End of Clause) FAR 52.216-22, Indefinite Quantity (Oct 1995) (a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract. (b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum." (c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations. (d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after 26 September 2019. (End of Clause) FAR 52.217-7, OPTIONS FOR INCREASED QUANTITY - SEPARATELY PRICED LINE ITEM The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor within 15 days. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree. (End of clause) FAR 52.217-9, OPTION TO EXTEND THE TERM OF THE CONTRACT (a) The Government may extend the term of this contract by written notice to the Contractor within 15 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 60 months. (End of Clause) FAR 52.252-2, CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/vffara.htm (End of Clause) FAR 52.252-6, AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of Clause) 252.211-7003 Item Unique Identification and Valuation (Mar 2016) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459. "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (If items are identified in the Schedule, insert "See Schedule in this table.) (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____. (v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification. (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC ...