Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CUP, SPECIMEN

Active
SPE2DH-26-T-5502Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of sterile screw-top specimen containers, each with a 4.0 ounce capacity, packaged in blister packs and made of plastic. The unit of issue is a pack of 100 units, and the product must have a shelf life of 60 months, with no more than nine months having passed between the date of manufacture and the date of delivery to the government. All labeling must comply with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must include the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must be commercial in nature, ensuring the contents are protected from damage, and units must be packed in suitable exterior shipping containers capable of safe transit at the lowest possible cost to the delivery point designated in the contract. All items must be marked in accordance with the Medical Marking Standard No. 1, and technical and quality requirements referenced in the DLA Master List apply. The NSN/part number is 6530-01-375-0171, with one pack of 100 units required, and delivery must occur within five days of award. The solicitation number is SPE2DH-26-T-5502, with a response deadline of August 3, 2026, and the point of performance is Groton, Connecticut. Bidders are required to specify the source and part number being offered.

General Info

DOD seeks single specimen cup NSN 6530-01-375-0171 via DIBBS by August 3, 2026, open competition.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

ATTN: SSN 801, GROTON, CT, 06340-4905, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DH-26-T-5502 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CUP,SPECIMEN
CUP, SPECIMEN
SCREW-TOP SPECIMEN CONTAINER,STERILE;
BLISTER PACKAGE; PLASTIC; 4.0 OUNCES
UNIT OF ISSUE: PG/100EA
..
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURER TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1A.
.ALL LABELS SHALL INCLUDE:
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
DATE OF MANUFACTURER, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.,, ,,
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
SPE2DH-26-T-5502
SECTION B
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-375-0171 Quantity: 1 PG Purchase Request: 7017609848QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326199
New
DIBBS
ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705 and MIL-STD-2073-1E, specifically to support the shipping of sensitive electronic amplifiers. These packaging solutions must ensure the integrity and protection of electronic components throughout transport and storage under military environmental standards. The solicitation is designated as a total small business set-aside under the SBA program, restricting eligibility exclusively to small businesses as defined by the Small Business Administration guidelines, with the NAICS code 326199 indicating the industry classification for other plastics product manufacturing. The place of performance is clearly identified as Robins Air Force Base with a zip code of 31098-1887, indicating where the packaged materials will be delivered and used. The contract opportunity was posted on July 26, 2026, with a firm response deadline of August 6, 2026, and is categorized as a subcontract under the Department of Defense's Active Devices Division. All proposals must align precisely with the referenced military specifications to ensure compatibility with defense logistics and compliance protocols. The procurement is managed through the DLA DIBBS system, and interested parties must submit responses via the provided online portal before the stated deadline. This opportunity is focused solely on qualified small businesses capable of delivering certified ESD and EMI protective packaging solutions that meet exacting military performance and documentation standards for high-value electronic equipment shipments.
ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
DIBBS
UVEX GENESIS CLEARThe contract specifies the procurement of 20 units of UVEX GENESIS CLEAR protective eyewear under NSN 4240-01-552-4142, with a unit price of $20.00 and a total contract value of $400.00. Delivery is required within 20 days from the contract award, FOB origin, with no allowance for quantity variance. The product must be approved by the U.S. Army and listed on the Authorized Protective Eyewear List (APEL), ensuring compliance with military safety standards. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging requirements. The item is not classified as hazardous, but shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery address in Grand Prairie, Texas. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers, and is subject to the revision in effect on the solicitation issue date. The sole source supplier is Honeywell Safety Products USA, Inc. under part number S3200HS. The solicitation number is SPE8E9-26-T-3251, issued by the Department of Defense under the Construction & Equipment MRO Service I office, with a response deadline of August 6, 2026, and a posted date of July 26, 2026. The NAICS code is 326199, and the point of contact is Matthew Kruc, with email and phone provided for inquiries. Inspection and acceptance occur at the destination, and the item is marked for delivery to the specified government logistics point W806DX. The contract includes a required delivery date of April 26, 2024, referenced for planning purposes, and the project code TP3 is referenced for tracking. All documentation and compliance must align with DoD procurement protocols, including the use of authorized units of issue and proper marking for federal logistics systems.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
DIBBS
SKID, MOLDEDThe contract specifies the procurement of 115 molded skid assemblies under solicitation number SPE8E6-26-T-3868, with a total small business set-aside designation and a North American Industry Classification System code of 326199. The item is identified by NSA part number 6920-01-168-6145 and must be delivered within 144 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and all items must be marked in compliance with MIL-STD-130, including the contract number, lot number, vendor name (optional), vendor serial number, and vendor CAGE code. Government identification must be removed from non-accepted supplies. Quality requirements for both manufacturers and non-manufacturers are tailored at the contract level. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and the place of performance is Texarkana, Texas, with the Department of Defense via the Red River Receiving Building as the contracting organization. Primary point of contact is Sophia Lim, reachable via email and phone provided.
RED RIVER RECEIVING BLDG

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
Federal
69--SKID,MOLDEDThe U.S. Department of Defense, through DLA Troop Support, is seeking quotes for 115 molded skids with NSN 6920011686145 under solicitation SPE8E626T3868, with delivery required to DLA Distribution Red River within 144 days of award. This procurement is a total small business set-aside classified under NAICS code 326199, exclusively open to small business concerns as defined by the SBA. Only approved sources listed as 81860 13031726 and 81860 13031726/04 are eligible to respond, and all quotes must be submitted electronically via the SAM.gov portal; hard copies are not accepted. No specifications, plans, or drawings are available for this requirement, and responsible sources are encouraged to review the solicitation posted online by the listed deadline of August 6, 2026. The point of contact for inquiries is designated through the solicitation’s Additional Information link or via the DIBBS website using the solicitation number, and all communication must be directed to the provided email address. The office is located in Philadelphia, Pennsylvania, with no specific place of performance identified beyond the delivery address.
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
SLED
Sample Disposal Pouch (SDPS-120) SupplyThe contract pertains to the supply of sample disposal pouches designated as P/N SDPS-120, which are engineered for the safe containment and proper disposal of biohazardous specimens. These pouches are critical for ensuring compliance with biosafety protocols in healthcare and laboratory environments, providing secure, leak-resistant packaging to mitigate risks associated with infectious or hazardous biological materials. The requirement is issued as a subcontract under the Health and Human Services Commission in Texas, with the North American Industry Classification System code 326199 indicating it falls under other plastic product manufacturing. The solicitation was posted on July 24, 2026, and responses must be submitted by August 18, 2026, at 4:30 PM Central Time. The place of performance and detailed contact information are not specified, but the transaction will be managed through the Texas SmartBuy portal at the provided UI link.
Health and Human Services Commission

POSTED

3 days ago

DEADLINE

in 22 days
View Details
NAICS: 326199
New
SLED
Retroreflective Sheeting and Sign Materials SupplyThe contract calls for the supply of retroreflective sheeting, aluminum blanks, inks, and adhesives specifically engineered to meet the durability and visibility standards set by the Texas Department of Transportation for traffic sign fabrication. All materials must comply with TxDOT’s technical specifications to ensure long-term performance under harsh environmental conditions, including UV exposure, temperature extremes, and weather-induced wear. The products are essential for manufacturing high-visibility road signs that maintain nighttime reflectivity and legibility over their service life. Subcontractors are expected to deliver these materials in accordance with stringent quality control requirements and schedule deadlines, with responses due by August 14, 2026. The procurement is classified under NAICS code 326199 for other plastic product manufacturing and is open to qualified suppliers with proven experience in delivering compliant signage materials to public transportation agencies. Performance will be evaluated based on material conformity, consistent quality, and timely delivery to support TxDOT’s infrastructure and safety initiatives across the state.
Texas Department of Transportation

POSTED

3 days ago

DEADLINE

in 18 days
View Details
NAICS: 326199
New
SLED
Red Plastic Egg Crate Manufacturing and SupplyThe contract involves the manufacture and supply of red plastic egg crates to the Texas Department of Criminal Justice, with strict requirements for consistent color, structural integrity, and full readiness for delivery to TDCJ facilities located throughout Texas. The crates must meet exacting quality standards to ensure durability and uniformity under institutional use conditions, with no flexibility permitted in material composition or finish. Bidders are expected to demonstrate production capability, quality control processes, and logistical readiness to fulfill the order without delay, as the products are intended for direct use in TDCJ operations. Submissions are due by August 7, 2026, and the contract is classified as a subcontract under NAICS code 326199 for other plastic product manufacturing. The procurement is administered through the Texas SmartBuy platform, and while the place of performance and agency office address are unspecified, all delivered crates must be positioned for immediate receipt at designated TDCJ locations. There is no set-aside designation, meaning the opportunity is open to all qualified vendors regardless of business size or category. The solicitation is non-negotiable in its technical requirements and places full responsibility on the supplier for compliance, timely delivery, and adherence to state facility specifications.
Texas Department of Criminal Justice

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
Source for Qualified Raw Materials or ComponentsThe contract requires the supply of traceable, certified raw materials or subcomponents that conform to QPL-AS23190-QPD standards for use in final products, ensuring full compliance with military specifications. Any substitution of approved materials or components is strictly prohibited without formal deviation approval, emphasizing rigorous quality control and supply chain integrity. Materials must be sourced from verified suppliers and documented to maintain auditability and traceability throughout the lifecycle of the product. This subcontract, issued under NAICS code 326199 by the Department of Defense’s LAND SUPPLIER OPERATIONS SMSG, is open for responses until August 25, 2026, with postings beginning July 24, 2026. The performance location and point of contact details are not specified, but all deliveries must meet the stringent compliance criteria outlined in the QPL-AS23190-QPD qualification list. The requirement underscores the Department of Defense’s need for reliable, documented, and approved components to support mission-critical applications, with no tolerance for unapproved alternatives.
LAND SUPPLIER OPERATIONS SMSG

POSTED

3 days ago

DEADLINE

in 29 days
View Details
NAICS: 326199
New
DIBBS
Precision Composite Ring ManufacturingThe contract requires the manufacture of 67 composite wearing rings to exact military drawing specifications, encompassing all phases from precision molding and curing to rigorous inspection and secure packaging. Each unit must meet stringent quality standards consistent with Department of Defense requirements, ensuring structural integrity and operational reliability under demanding conditions. The work is to be performed at a designated facility in New Cumberland, Pennsylvania, with delivery and compliance deadlines strictly tied to the contract timeline. This is a subcontract opportunity under the NAICS code 326199 for other plastic product manufacturing, sourced through the Maritime Supply Chain organization within the Department of Defense. Bidders must submit their proposals by the deadline of July 29, 2026, with no set-aside provisions specified. The solicitation is publicly accessible via the DIBBS portal, and contractors are expected to adhere fully to military drawing standards without deviation, ensuring traceability, documentation, and conformity throughout the production cycle.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 326199
New
DIBBS
Precision Composite Ring ManufacturingThe contract involves the manufacture of 83 wearing rings from government-approved composite materials, strictly following technical drawing RQ002, with full compliance to configuration control standards and approved source listings. All components must be produced using materials and processes that meet the stringent requirements set by the Department of Defense to ensure consistency, traceability, and performance under operational conditions. The work is to be performed at a designated facility in New Cumberland, Pennsylvania, with zip code 17070-5002, and delivered under the terms of a subcontract awarded under NAICS code 326199, which covers other plastics product manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for potential subcontractors to submit proposals. The contract is administered by the Maritime Supply Chain under the Department of Defense, emphasizing its critical role in defense-related logistics and equipment support. While no point of contact or set-aside details are provided, the requirement to adhere to approved materials and configuration control implies a high degree of oversight, quality assurance, and documentation throughout the manufacturing and delivery process. Interested parties must respond via the designated DIBBS portal before the deadline to be considered.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 326199
New
DIBBS
Supply of Reflective Tape (White and Silver)The contract calls for the procurement or manufacturing of 224 rolls of pressure-sensitive reflective tape in white and silver, each roll measuring 1,800 inches in length and 6 inches in width, with strict compliance to military or commercial specifications. The supplier is responsible for all aspects of fulfillment including proper packaging, accurate labeling, and timely delivery to the designated DLA warehouse located in Tracy, California, with a ZIP code of 95304-5000. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, as defined by the SBA under FAR 19.5, and the NAICS code 326199 applies to this classification. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Svc I office.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 326199
New
DIBBS
ESD/EMI Protective Packaging SupplyThe contract seeks the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically including Type I and Type III barrier materials sourced exclusively from suppliers listed on the QPL-81705. These materials are critical for safeguarding sensitive electronic components during handling, storage, and transportation within defense logistics environments. All offerings must adhere strictly to the performance and qualification standards mandated by the military specification to ensure compatibility and reliability in mission-critical applications. This is a subcontract classified as a Total Small Business Set-Aside under SBA regulations, meaning only small businesses are eligible to compete, in alignment with FAR 19.5. The NAICS code 326199 designates the industry as other plastic product manufacturing, indicating the nature of the materials involved. The contract was posted on July 24, 2026, with responses due by August 9, 2026. Performance is required at Robins Air Force Base, Georgia, 31098-1887, under the auspices of the Maritime Supply Chain within the Department of Defense. All potential bidders must ensure compliance with the specified technical requirements and eligibility criteria to be considered for award.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333310
New
DIBBS
IMPRESSION TRAY, DENThe contract is for the procurement of 2 bags of disposable dental impression trays, each bag containing 12 units of size number 5 small upper perforated trays made of rigid, strong light blue plastic. The item is identified by NSN 6520-01-573-2767 and is being procured under solicitation SPE2DH-26-T-5501 with a response deadline of August 3, 2026. Delivery is required within 20 days of award, and the place of performance is Scott AFB, Illinois, 62225-5252. The trays must meet technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA packaging standards. The supply is subject to requirements for the removal of government identification from non-accepted items, and covered defense information may apply. Bidders must clearly specify the source and part number being supplied. The contract is administered by the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
RESIN, ACRYLIC, DENTALThe contract specifies the procurement of one unit of dental acrylic resin in a 1-pound splint kit with NSN 6520-01-273-2595, under solicitation SPE2DH-26-T-5518, with a delivery requirement of 20 days after award. The item is classified as a hazardous material with a flammable flash point and is subject to Performance Oriented Packaging (POP) requirements, mandating packaging that meets applicable U.S. Department of Transportation 49 CFR and International Civil Aviation Organization (ICAO) regulations. All packaging must be sealed in unit containers to prevent damage and shipped in commercial exterior containers that ensure safe, cost-effective delivery to Tyndall AFB, Florida. The material must be labeled with the legend "FLAMMABLE," along with flash point and shelf life information, and must comply with Medical Marking Standard No. 1, superseding MIL-STD-129 except that barcodes are not required. A current Material Safety Data Sheet (MSDS) is mandatory and must be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet, and a physical copy must accompany each shipment. The item is supplied by Great Lakes Orthodontics under unit of issue EACH, and the procurement falls under NAICS code 339114 with the Department of Defense as the contracting agency.
Dental Equipment and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
BAG, WATER SAMPLEThe contract specifies the procurement of 4 packages of sterile polyethylene water sample bags, each containing 100 units for a total of 400 bags, with each bag sized at 3 by 7 inches and holding 100 milliliters. Each bag is preloaded with a sodium thiosulfate tablet and features a thickness of 2.25 mil or 0.057 mm. The product must have a shelf life of 60 months, with no more than nine months elapsed from the date of manufacture to the delivery date to the government. Labels must clearly indicate the NSN 6640-01-153-6786, manufacturer and CAGE code, date of manufacture or expiration, and the contract or lot number. All packaging must comply with the Medical Marking Standard No. 1, replacing any prior reference to MIL-STD-129, and must be sealed in commercial-grade unit containers that protect against damage and shipped in suitable exterior containers to ensure safe delivery at the lowest possible shipping cost. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the packaging must adhere to DLA packaging requirements. Bidders must identify the source and part number being supplied. Delivery is required within five days after award, and the solicitation falls under NAICS code 333998 with the contracting office under the Department of Defense’s Medical Supply Chain FSH, located in Groton, Connecticut. The contract is governed by the solicitation number SPE2DH-26-T-5499 with a response deadline of August 3, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 453998
New
DIBBS
BONE, INTRAOSSEOUS INFUThe contract pertains to the procurement of two units of an intraosseous infusion training system specifically designed for adult proximal right tibia simulations, featuring a foam cortical shell structure compatible with Vidacare EZ-IO procedures. Each unit must be individually packaged in a sealed container that safeguards against damage or breakage, with all units further secured in commercial-grade exterior shipping containers suitable for safe transport via common carriers at the lowest possible rate to the designated delivery point. Packaging and marking must strictly comply with Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129; documentation for this standard is available through DLA Troop Support. The NSN 6910-01-590-5529 identifies the item, and bidders are required to specify the source and part number being offered. The procurement falls under a simplified acquisition process governed by the DLA Master List of Technical and Quality Requirements, with compliance obligations tied to the solicitation’s issue date. Delivery is required within 20 days of award, and all information must adhere to the federal procurement framework overseen by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the designated point of contact.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
COAT, MAN'S PAJAMAThe contract is for the procurement of seven man’s pajama coats, each featuring a full-length, collarless design made from broadcloth cotton and polyester with a snap fastener front and blue overall coloration. These items are intended for medical acquisitions and must comply with strict packaging requirements, including sealed unit containers to prevent damage and commercial shipping containers suitable for safe transport at the lowest rate to the designated delivery point. All units must be marked in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and suppliers are directed to obtain the latest version from DLA Troop Support. The unit of issue is each, and bids must clearly specify the source and part number being supplied. The NSN for this item is 6532-00-081-1804, with a required delivery within five days of award. The solicitation number is SPE2DH-26-T-5500, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 3, 2026. The contract incorporates technical and quality requirements referenced in the DLA Master List and requires adherence to DLA packaging standards and the removal of government identification from non-accepted supplies.
Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
MATTRESS, LITTERThe mattress, specifically designed as a Warrior Evacuation Litter Pad (WELP), is a specialized medical evacuation component engineered for military aviation use, meeting the stringent standards of the U.S. Air Force Air Mobility Command. It measures 72 by 23 by 2 inches, weighs no more than 10.5 pounds, and features a black, non-reflective, conductive surface with a non-skid, low shear, and low friction finish to minimize patient injury during transport. The mattress includes two fluid-resistant pressure relief vents on opposing sides, ultrasonically welded center seams, and impermeable materials that repel fluids, dust, and sand, enhancing durability and hygiene. Its design prioritizes weight distribution to reduce the risk of shear injuries and decubitus ulcers, though it is not intended for flotation or immersion in liquids. The product has been certified for high-altitude and rapid decompression performance, surviving exposure from 15,000 feet to 45,000 feet above sea level and meeting Federal Aviation Regulations for flammability. It is approved for aviation use and adaptable to multiple operational environments. This item is procured under solicitation SPE2DH-26-T-5506, with a single unit required and a delivery deadline of five days after order placement. The NSN is 6530-01-548-0262, and the procurement falls under NAICS code 339113. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition scale. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The item is not regulated by the FDA. Bidders must clearly state their source and part number. The point of contact for the solicitation is Tina Vu of the Department of Defense, with responses due by August 3, 2026, and performance required at Joint Base Elmendorf-Richardson, Alaska, with a ZIP code of 99506-4400.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
BAND, EXERCISE, PHYSICALThe contract pertains to the procurement of exercise therapy bands made of latex and powder-free material, designed for use on upper and lower extremities and color-coded blue, with each roll measuring 25 yards. The unit of issue is the roll, and the requirement is for two rolls identified by NSN 6530-01-651-8584. Bidders must specify the source and part number of the product being offered. All supplies must comply with the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Government identification must be removed from non-accepted supplies, and delivery is required within 20 days of award. The solicitation number is SPE2DH-26-T-5483, posted on July 26, 2026, with responses due by August 3, 2026. The NAICS code is 339113, and the acquiring agency is the Department of Defense through the Medical Supply Chain FSH. The point of contact is Tina Vu, reachable via email at tina.vu@dla.mil or phone at 4457371120. The purchase request number is 7017600040, and the place of performance and organizational address details are not specified. Offers must be submitted through the DIBBS portal using the provided UI link.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
BUCKET, KICK, SURGICAThe contract specifies the procurement of a surgical waste bucket, model BUCKET, KICK, SURGICA, with a National Stock Number 6530-01-501-0551, quantity of one unit, for use in operating rooms with a capacity of thirteen quarts. The bucket features a 360-degree rubber bumper, a stainless steel lid, and four casters, designed for safe and convenient waste collection. All packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container that prevents damage or breakage, and shipped in suitable exterior containers for safe delivery via common carrier at the lowest possible rate to the designated delivery point in APO, 09094-3219. Marking must strictly adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and documentation for this standard is available through DLA Troop Support. The item must be sourced with the correct part number and supplier identified by the bidder. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must conform to DLA’s procurement guidelines, government identification must be removed from non-accepted supplies, and covered defense information provisions may apply. Delivery is required within 20 days of award, with the solicitation issued under SPE2DH-26-T-5491, opening on July 26, 2026, and closing on August 3, 2026, under the NAICS code 423450 for medical and dental equipment and supplies wholesale.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
CUSHION, THERAPEUTICThe contract is for the procurement of six therapeutic cushions, identified by NSN 6530-01-700-0587 and part number AXR366, under solicitation SPE2DH-26-T-5490. Delivery is required within five days of award, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance occur at the delivery point, and the item is not regulated by the FDA. Packaging and marking must strictly adhere to the Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129; packaging must be commercial-grade, sealed, and capable of protecting the product during transit, with palletization following DLA’s packaging requirements. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated delivery address at Fort Bragg, North Carolina, with special handling instructions and tracking codes provided for government use. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The unit price is $6.00 per unit, totaling $36.00 for the full order.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
FILLER, PIPETThe contract pertains to the procurement of two FILLER, PIPET units with NSN 6640-01-583-0842 under solicitation SPE2DH-26-T-5512, requiring delivery within ten days to Fort Campbell, Kentucky. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is sealed in a container that protects against damage or breakage, while exterior shipping containers must facilitate safe, low-cost delivery via common carrier. Marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must clearly identify the source and part number being supplied. The item is not regulated by the FDA and is classified as an end item under 6640-01-547-1760. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision controls tied to the solicitation or award date. Bid responses are due by August 3, 2026, and all information must be submitted through the designated DIBBS portal.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
PAPER, RECORDING, CLINICThe contract is for 10 packages of recording paper designed for use with clinical hematology analyzers, specifically under NSN 6640-01-614-5312, with each package containing three units. The item is classified as an end item under the analyzer type 6640-01-510-2492, and full technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within 20 days of award, and the solicitation number is SPE2DH-26-T-5498, issued on July 26, 2026, with responses due by August 3, 2026. The procurement is managed by the Medical Supply Chain FSH under the Department of Defense, with performance to be delivered to FPO, 96674, and the point of contact is Tina Vu, reachable via email and phone provided. The North American Industry Classification System code is 333998, indicating it falls under other miscellaneous manufacturing.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
SPOON, MEASURINGThe contract specifies the procurement of five measuring spoons made of plastic, each with an inside cavity diameter of 0.375 inches, a flat design, and a nominal dimension of 0.398 inches. The spoons feature a rod-type handle measuring three inches in length, 0.313 inches wide, and 0.125 inches thick, with a capacity of 0.5 grams. These items are sold and delivered individually, identified by the NSN 6640-01-070-7877. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and non-accepted supplies must have government identification removed prior to return. The solicitation number is SPE2DH-26-T-5497, issued on July 26, 2026, with responses due by August 3, 2026. Delivery is required within 20 days of award, and the place of performance is Fort Stewart, Georgia, under the Department of Defense, Medical Supply Chain FSH. Primary point of contact is Laura Mitchell, reachable via email and phone provided.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details