Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Custom Flatbed and A-Frame Fabrication & Installation

Active

Federal

Response Deadline08/17/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the design, fabrication, and installation of custom flatbeds with integrated A-frames on each chassis, requiring structural reinforcement and standardized tie-down points that meet government design specifications. All work must adhere to strict engineering and safety standards to ensure durability and compliance with federal transportation and load-securement requirements. The project is scoped as a subcontract under a Small Business Set Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under other fabricated metal product manufacturing. The contract was posted on August 5, 2026, with a response deadline of August 17, 2026, at 8:00 PM. Performance is required at a location with ZIP code 77416, and the sponsoring agency is the U.S. Secret Service under the Department of Homeland Security. While no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal before the deadline to be considered for award under this set-aside opportunity.

General Info

Small business set-aside for custom flatbeds with A-frames, per federal specs, due August 17, 2026, for U.S. Secret Service.

Agency

Department Of Homeland Security → U S Secret ServiceView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

77416, DC, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 08:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → U S Secret Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → U S Secret Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, fabrication, and installation of flatbeds with integrated A-frames on each chassis, including structural reinforcement and tie-down points per government design.

Similar Contracts

Same NAICS industry code

Supply of Reflex Sights with 45-Degree Offset Mounts

Department of Public Safety

POSTED

about 17 hours ago

DEADLINE

Fire Extinguisher Supplies and Replacement Units

Internat Boundary And Water Commission

POSTED

about 21 hours ago

DEADLINE

ILWW Fabricated Steel Supply

Solicitation # W912EK26QA045

The US Army Corps of Engineers, Rock Island District, is seeking a small business to supply and fabricate steel components for the rejuvenation and modernization of the Peoria and LaGrange wicket dams along the Illinois Waterway. This project is vital to maintaining the efficiency of a key agricultural transportation corridor that supports global food supply chains, making it a matter of national and international significance. The contractor is responsible for providing all necessary steel materials and fabrication services to complete a backlog of wicket gates, with the USACE handling only the coating and final assembly; no steel, personnel, equipment, or additional components will be furnished by the government unless explicitly stated. Solicitation number W912EK26QA045, posted on July 22, 2026, with a response deadline of August 12, 2026, is a total small business set-aside under FAR 19.5, targeting NAICS code 332999 for other fabricated metal product manufacturing. The contract is managed by the Illinois Waterway Project Office, with primary point of contact Joseph Porter reachable at 309-794-5333 or joseph.e.porter@usace.army.mil. The work will be performed in Rock Island, Illinois, and all vendors must be certified small businesses eligible for the set-aside. The contract requires full compliance with federal procurement standards and delivery of materials meeting exact engineering specifications to ensure the dams operate reliably for decades to come.

W07V Endist Rock Island

POSTED

about 21 hours ago

DEADLINE

Crash Barrier System

Solicitation # W911S226U3982

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is seeking proposals for a Crash Barrier System under solicitation number W911S226U3982, which was posted on August 7, 2026, with a response deadline of August 14, 2026, at 3:15 PM Eastern Time. This contract is classified as a combined action and is exclusively reserved for small businesses under a total small business set aside, with the NAICS code 332999 indicating it pertains to other miscellaneous fabricated metal product manufacturing. The place of performance is listed with a ZIP code of 54656, though specific city and state details are not provided, and the primary point of contact is Kevin Nelson, reachable at 502-898-2418 or kevin.a.nelson.civ@army.mil. The contracting office is located at Fort Drum, New York, with a ZIP code of 13602-5220, and the procurement is managed by the military installation at Fort Drum under the broader authority of the Department of Defense. All interested parties must submit responses via the SAM.gov portal linked in the solicitation details.

W6QM Micc-Ft Drum

POSTED

about 21 hours ago

DEADLINE

Closure Protective Covers (CPCs)

Solicitation # N6660426Q0288

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting Closure Protective Covers (CPCs) under solicitation number N6660426Q0288 on a Firm Fixed Price basis, with a maximum funding limit of $197,000. This is a total small business set-aside under NAICS code 332999, restricted to businesses with 750 or fewer employees, and all offerors must be registered in the System for Award Management (SAM) prior to award. The requirement includes two CLINs: CLIN 0001 for a first article unit and CLIN 0002 for production units, with delivery FOB Destination at NUWCDIVNPT in Newport, Rhode Island. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis, prioritizing the highest quantity of CPCs within the funding cap, then the lowest total price. All CPCs must be manufactured strictly in accordance with Government Drawing JCM-14865-001 and the REV M drawing package, and require a Certificate of Compliance including detailed material certifications, test data, and conformance documentation for components such as adhesives, seals, fittings, and coatings. A unique item identifier (UID) must be applied to all items with a unit acquisition cost of $5,000 or more, in compliance with DFARS Clause 252.211-7003. Offerors must hold an active CMMC Level 2 self-assessment score in SPRS and have a valid NIST SP 800-171 DoD Assessment score on file, not older than three years. Access to export-controlled drawings designated Distribution D requires a valid Joint Certification Program (JCP) certification and adherence to Arms Export Control Act and Export Control Reform Act restrictions. Proposals must be submitted electronically via email to Hannah Murphy at Hannah.l.murphy7.civ@us.navy.mil by August 14, 2026, and must include the CAGE Code, SAM Unique Entity ID, point of contact information, and completed pricing table A. The Government prefers payment via Government Purchase Card (Mastercard) but reserves the right to require payment through Wide Area Workflow. Failure to meet any of the technical acceptability, CMMC, or SPRS requirements will disqualify an offeror from consideration regardless

Nuwc Division Newport

POSTED

about 21 hours ago

DEADLINE

176LRS Logistics Operational Device (LOD) Cart

Solicitation # W50S6L26Q0006

The solicitation for the 176LRS Logistics Operational Device (LOD) Cart is a Small Business Set Aside opportunity under the NAICS code 332999, reserved exclusively for small businesses. The contract is managed by the Department of Defense through the W7MU Uspfo Activity Akang 176 office located at Joint Base Elmendorf-Richardson in Alaska with a ZIP code of 99506-2959, and performance is also expected to occur within Alaska. The solicitation, identified by number W50S6L26Q0006, was posted on August 7, 2026, with proposals due by August 20, 2026, at 8:00 PM Eastern Time. Primary point of contact for inquiries is Conner VanFossen via email conner.vanfossen.5@us.af.mil or phone 406-370-6125, with Juan Ortega listed as the secondary contact. The opportunity is classified as a combined solicitation indicating it may include both acquisition and procurement elements, and interested small businesses must respond through the official SAM.gov portal linked in the posting.

W7MU Uspfo Activity Akang 176

POSTED

about 21 hours ago

DEADLINE

12--GA-NWR LE DIV ZONE OFCR-BULLET TRAPS Z-8

Solicitation # 140FS326Q0128

The U.S. Fish and Wildlife Service, under the Department of the Interior and administered by FWS SAT Team 3 in Falls Church, VA, is soliciting proposals for the provision and installation of seven Goliath 4X4 Bullet Trap systems along with associated components including stands and lifting lugs, for use at a National Wildlife Refuge Law Enforcement site in Immokalee, Florida. The contract is a firm-fixed-price, small business set-aside under NAICS code 332999 with a performance period from August 24, 2026, to December 31, 2026, and follows commercial item procedures under FAR Part 12. The solicitation requires delivery FOB destination, with inspections and acceptance occurring at the delivery site, and mandates electronic invoicing through the Department of the Treasury’s Invoice Processing Platform. Proposals must be submitted by August 12, 2026, via email to the primary point of contact, and must include a completed SF 1449 form, detailed technical approach narrative, past performance references from at least three similar federal, state, or local government projects, and full pricing information. All offerors must be active in SAM.gov with a valid UEI and self-certify as a small business, with eligibility for WOSB, EDWOSB, or 8(a) status encouraged but not required for submission. Evaluation prioritizes technical experience, capacity, and past performance significantly over price, with no use of lowest price technically acceptable methodology; instead, award will be made based on a trade-off analysis to determine the most advantageous offer. The contractor must identify key personnel and disclose any subcontractors, adhere to strict cybersecurity and identity verification protocols, comply with federal ethics and political activity restrictions, avoid prohibited internal confidentiality agreements, and refrain from discriminatory diversity, equity, and inclusion practices as mandated by deviation clauses. Special packaging and preservation requirements are referenced but not fully detailed, with marking and labeling tied to delivery and shipment identification per standard form instructions. All contract clauses are incorporated by standard FAR templates with one alternate version applied to subcontractor sales restrictions, and no MIL-STD packaging or labeling standards are cited, consistent with commercial item acquisition rules.

POSTED

about 21 hours ago

DEADLINE

Boiler System Component Supply

Northlands Job Corps Center /ETR

POSTED

DEADLINE

Sampling Stations Supply

POSTED

DEADLINE

in about 1 month

Wind-Flex Banner Hardware Supply

University of Houston – Clear Lake

POSTED

DEADLINE

Rigid 90-Degree Elbows Supply

POSTED

DEADLINE

Supply of Steel Strapping (1-1/4" x .031" x 836')The contract seeks the supply of steel strapping measuring 1-1/4 inches in width and .031 inches in thickness, with each unit containing 836 feet of material, manufactured from low carbon cold-rolled steel and excluding stainless or galvanized varieties. This requirement is issued under a subcontract classified as a SBA Certified Women-Owned Small Business (WOSB) program set-aside, ensuring eligibility and participation are restricted to businesses certified under the WOSB Program per FAR 19.15. The North American Industry Classification System code 332999 applies, indicating the scope falls under other fabricated metal product manufacturing. The solicitation was posted on August 6, 2026, with a firm response deadline of August 11, 2026, at 2:00 PM. The place of performance is specified as New Cumberland, though no further address details are provided. The contracting agency is DLA Distribution under the Department of Defense, indicating this procurement supports federal defense logistics needs. Interested vendors must respond within the stated window to compete for this opportunity, with all submissions subject to WOSB certification and compliance requirements.

DLA Distribution

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → U S Secret Service

Same awarding agency

Supplier Opportunity for Vanguard-VL Ballistic ShieldsThe U.S. Secret Service under the Department of Homeland Security is seeking suppliers to provide pre-manufactured Vanguard-VL ballistic shields through a subcontract arrangement, with delivery either to the prime contractor or directly to the government if sourced via a distributor. The solicitation is open for responses until August 17, 2026, with all submissions required by 5:00 p.m. Eastern Time. The NAICS code 423420 indicates this opportunity falls under Wholesale Trade of Miscellaneous Durable Goods, specifically relating to the distribution of safety and protective equipment. Performance of the contract is expected to originate from or be delivered to the location associated with ZIP code 77416. The opportunity does not specify a set-aside classification, meaning it is open to all qualified vendors regardless of business size or status, and no point of contact details are provided, suggesting procurement actions will be handled through standard channels on the SAM.gov portal.

Office Equipment Merchant Wholesalers

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires technical inspection support, documentation review, and compliance verification to ensure ballistic shields conform strictly to specified requirements before government acceptance. The work involves thorough evaluation of product quality, adherence to technical standards, and validation of all supporting records to meet the U.S. Secret Service’s stringent safety and performance criteria under the Department of Homeland Security. All activities must be completed in alignment with contract specifications to facilitate official acceptance and avoid delays or rejections. This is a subcontract opportunity classified under NAICS code 541330, with a response deadline of August 17, 2026. The place of performance is indicated as 77416, though no specific city or state is provided. The solicitation was posted on August 6, 2026, and there is no set-aside designation specified. Interested parties must submit their proposals by the stated deadline to be considered for award, with all work centered on ensuring the ballistic shields undergo comprehensive inspection and verification prior to federal acceptance.

Engineering Services

POSTED

DEADLINE

Specialized Packaging and Delivery of Sensitive EquipmentThe contract requires specialized packaging, secure transportation, and timely delivery of six ballistic shields to a U.S. Secret Service facility in Washington, D.C., with strict adherence to federal packaging regulations and chain-of-custody protocols to ensure the integrity and security of the equipment throughout transit. The work must be performed in compliance with standards applicable to sensitive government equipment, emphasizing controlled handling, documented transfers, and protection against unauthorized access or environmental damage. Subcontractors must respond by August 17, 2026, under the NAICS code 484220 for freight transportation arrangement, indicating a focus on logistics and secure transport services. The contract is issued by the Department of Homeland Security through the U.S. Secret Service, with performance required at a specified location in Washington, D.C., though exact address details are not provided. All parties involved are expected to meet federal security requirements without deviation, ensuring the shields are delivered in pristine condition and fully accountable from pickup to final receipt.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Ballistic Shield Manufacturing – Vanguard-VL ModelThe U.S. Secret Service, under the Department of Homeland Security, is seeking a subcontractor to manufacture and deliver six Vanguard-VL ballistic shields with exact specifications for size, weight, finish, and handle system, intended for use in Washington, D.C. The contract requires full compliance with technical standards to ensure the shields meet operational exigencies for high-threat protective scenarios, with all units required to be completed and delivered by the response deadline. The solicitation is categorized under NAICS code 339999 for other miscellaneous manufacturing and is open for submissions until August 17, 2026. The place of performance is designated as a location with ZIP code 77416, which may indicate a facility in the Houston, Texas area, though the exact address is not provided. No set-aside status or small business preferences are specified, and the contracting office has not designated a point of contact. The bid submission window is open as of August 6, 2026, with an online portal through SAM.gov for participation. All proposals must demonstrate proven capability in producing ballistic protective equipment to federal law enforcement standards.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Ballistic Shields

Solicitation # 70US0926Q70092825

The U.S. Secret Service, under the Department of Homeland Security, is soliciting quotes for Ballistic Shields through an unrestricted, full and open Request for Quote numbered 70US0926Q70092825, issued under FAR Subpart 12.6 with provisions effective through Federal Acquisition Circular 2026-01 dated March 13, 2026. The requirement is classified under NAICS code 339999 for All Other Miscellaneous Manufacturing, and the government intends to award a single purchase order based on the responses received. The solicitation is not issued as a formal written document; the RFQ notice is the sole source of requirements, and interested parties must submit quotes by the deadline of August 17, 2026, at 5:00 p.m. Eastern Time. The place of performance is listed as District of Columbia with a ZIP code of 77416, though this appears to be an error, and the official office address is in Washington, D.C., with a ZIP code of 20223. Primary point of contact is Taylor Haire, with Jade Gaston as the secondary contact, both reachable via email through the U.S. Secret Service domain. All relevant details and contractual terms are contained in the attached RFQ documents, and inquiries must be directed to the designated contacts before the submission deadline.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fleet Maintenance Management and Reporting Services

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Bus Body and Interior Refurbishment

POSTED

DEADLINE

Bus Electrical and HVAC System Repairs

All Other Automotive Repair and Maintenance

POSTED

DEADLINE

Preventive and Corrective Bus Maintenance Services

POSTED

DEADLINE

Bus Parts Supply – OEM and Aftermarket Components

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Warranty and Post-Delivery Support (12+ Months)The contract requires comprehensive warranty and post-delivery support for a minimum of 12 months following acceptance, encompassing all necessary repairs, replacement of defective or worn parts, and ongoing technical assistance to ensure continued operational functionality. This support obligation is non-negotiable and must be maintained without interruption from the date of acceptance through the full term of the warranty period. The work is structured as a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses as defined by the SBA, and is classified under the NAICS code 811198, indicating it pertains to other personal and household goods repair and maintenance services. The awarding agency is the U.S. Secret Service under the Department of Homeland Security, with performance expected to occur in the area identified by the zip code 77416. Although no specific point of contact is listed, responses must be submitted by the deadline of August 17, 2026, at 8:00 p.m. Eastern Time, and the opportunity was posted on August 5, 2026.

All Other Automotive Repair and Maintenance

POSTED

DEADLINE

Technical Documentation and Source Code SubmissionThe contract requires the preparation and submission of comprehensive technical documentation, schematics, and source code for upfit systems to ensure full government ownership and regulatory compliance. All deliverables must meet strict standards to support the U.S. Secret Service’s operational needs under the Department of Homeland Security, with an emphasis on transparency, audit readiness, and long-term maintainability of the systems. The work is governed by a Small Business Set Aside designation, meaning only qualifying small businesses are eligible to bid, and the NAICS code 541330 classifies the effort within engineering services. The opportunity is open for submissions until August 17, 2026, with proposals due by 8:00 PM Eastern Time, following a posting date of August 5, 2026. Performance of the contract is expected to occur at a location with a zip code of 77416, though no specific city or state is provided in the details. The subcontract is part of a broader initiative to secure government control over technology artifacts, and all submitted materials must be fully documented and structured to facilitate future modification, support, and oversight by federal entities. Failure to provide complete, accurate, and compliant deliverables may result in rejection or non-payment.

Engineering Services

POSTED

DEADLINE