Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Custom Mechanical Clamp Fabrication and Installation

Active

International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Petrojam Limited, under the Government of Jamaica, has issued a subcontract for the fabrication and installation of custom-engineered mechanical clamps. This emergency refinery repair project specifically targets the E-30 and E-7 heat exchangers to stop active leaks and restore critical steam distribution and production operations. The contract is categorized under NAICS code 332313 and was posted on August 25, 2026. The primary objective is to ensure the operational integrity of the refinery equipment through specialized engineering and installation services to mitigate production downtime.

General Info

Petrojam Limited subcontract for fabricating and installing mechanical clamps to repair refinery heat exchangers.

Agency

Government of Jamaica → Petrojam LimitedView Agency

NAICS

332313 - Plate Work ManufacturingView NAICS

Place of Performance

JAM

Set-Aside

NONE

Documents

This scope was carved out of GOJEP-10305907.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Mechanical Clamp Fabrication and Installation for E-30 and E-7

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 25

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Jamaica → Petrojam Limited

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Jamaica → Petrojam Limited

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricate and install custom-engineered mechanical clamps on E-30 and E-7 heat exchangers to stop leaks and restore steam distribution and production operations in an emergency refinery repair context.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E9-26-T-3443

This contract is for the procurement of aluminum alloy metal plates, specifically 1 inch thick, 36 inches wide, and 96 inches long, conforming to Alloy 6061, Temper T651. The total quantity consists of 14 units across two line items, with delivery required within 51 days after order. The items are to be shipped FOB Origin to DLA Distribution facilities in New Cumberland, PA, and San Diego, CA. Strict compliance with technical and quality standards is required, including adherence to ASTM B660, ASTM B666, and SAE AMS4027P. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Key deliverables include a Certificate of Quality Compliance with every shipment and specific continuous identification markings on each unit. Packaging and palletization must follow MIL-STD-129 and RP001 requirements, and no test coupons are permitted.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8E4-26-Q-0390

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one metal plate, identified by part number LTA-A05-193-001 and NSN 9515-66-149-2067, manufactured by Thales Australia Bendigo Land and Joint Systems. The delivery is required within 30 days after receipt of order, with the destination and acceptance point located at Fort Riley, Kansas. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards under MIL-STD-2073-1E and MIL-STD-129. It also incorporates requirements for the removal of government identification from non-accepted supplies and the protection of covered defense information. Shipping is designated as FOB Origin.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

PLATE, COVER, DEHYDRATOR

Solicitation # SPE8E9-26-Q-0723

This contract is a firm fixed price solicitation for the procurement of 13 dehydrator cover plates, identified by NSN 4440-01-104-5329. The items are designated as critical application items and must be delivered within 30 days after receipt of the order to the DLA Distribution DDSP New Cumberland facility. The contract specifies that the items must be free of intentionally added mercury, except where functionally required by NAVSEA specifications, and requires compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The procurement incorporates various DLA technical and quality requirements, including specific guidelines for packaging and the removal of government identification from non-accepted supplies. Because the manufacturing of these plates may involve specialized casting or forging tooling, the government provides resources for sourcing assistance through the DLA Aviation or Land and Maritime supply chains. Inspection and acceptance will occur at the destination, and the shipping terms are established as FOB Origin.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPMYM426Q3698

Solicitation SPMYM426Q3698 is a firm fixed price request for quotes issued by the Department of Defense, specifically DLA Maritime - Pearl Harbor, for the procurement of plates under NAICS code 332313. This opportunity is a total small business set aside and will be awarded based on the Lowest Price Technically Acceptable evaluation criteria. Vendor responsibility will be determined using PPIRS and in accordance with FAR 9.104. Interested contractors must submit their offers by August 28, 2026. A critical requirement for consideration is the completion of the HMDRFQINFO section on pages 20 through 23, which must explicitly state the manufacturer and the estimated delivery time. Shipping is designated as FOB Destination to the Pearl Harbor Naval Shipyard IMF in Hawaii. Bidders must provide detailed company information, including business size, CAGE code, and their status as a manufacturer, authorized distributor, or third party dealer, while ensuring all supply chain traceability documentation is maintained.

DLA Maritime - Pearl Harbor

POSTED

about 20 hours ago

DEADLINE

PLATE,COVER ASSY — 4320011953116 — N0010426QFG68

Solicitation # N0010426QFG68

This contract governs the procurement of a Cover Plate Assembly designated as Special Emphasis material for use in critical shipboard systems. Due to the high risk associated with material failure, the contract mandates strict quality control, including the use of hot forged Alloy C71500 and comprehensive non-destructive testing such as ultrasonic and dye penetrant inspections. The contractor must adhere to a quality system compliant with ISO-9001 and provide detailed certifications of compliance, chemical and mechanical analyses, and objective quality evidence. Key requirements include strict configuration control, where all waivers, deviations, and engineering change proposals must be approved by the Contracting Officer. Welding and brazing processes require prior submission and approval of qualification data and procedures. The contract also prohibits the intentional use of mercury and requires full traceability of materials. Final acceptance is contingent upon government source inspection and the submission of certification data via the Wide Area Work Flow system to the Portsmouth Naval Shipyard prior to shipment.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Mechanical Clamp Fabrication and Installation for E-30 and E-7

Solicitation # GOJEP-10305907

Petrojam Limited

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305014217558)The Department of Defense, through the ASC Commodities Division, is seeking a subcontractor for the manufacture and supply of 20 machine screws under NSN 5305014217558. The contractor must ensure all units meet strict DLA and military specifications regarding quality, packaging, and labeling. This opportunity falls under NAICS code 332311 and is to be performed in Los Alamitos, California. The solicitation was posted on August 25, 2026, with a response deadline of September 2, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Hardware Manufacturing – Access Door Hinge

Defense Logistics Agency

POSTED

DEADLINE

Cover Assembly, Panel (NSN: 1285011979818) Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-22HE

The Defense Logistics Agency under the Department of Defense has issued a solicitation for the procurement of 12 Spacer Plates, identified by NSN/Part Number 5365-01-349-5190. This requirement is tracked under purchase request 7015111389 and solicitation number SPE4A6-26-T-22HE. The solicitation was posted on August 25, 2026, with a response deadline set for September 2, 2026. This federal contract opportunity is managed through the DLA and is available for review via the DIBBS procurement portal.

Defense Logistics Agency

POSTED

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-Q-0655

This solicitation from the DLA Dist San Joaquin is for the procurement of 434 units of instruction plates under part number 9905-01-530-4640. The contract requires delivery within 90 days after receipt of order. Technical and quality requirements are governed by the DLA Master List, with specific mandates for packaging and the removal of government identification from any non-accepted supplies. Quality assurance must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific AQLs assigned to critical, major, and minor attributes. Additionally, the contract contains strict export control restrictions under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DOD training to access technical data.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

BLANKING PLATE ASSE

Solicitation # SPE7MC-26-T-226E

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7MC-26-T-226E for the procurement of seven Blanking Plate Assemblies. The items are identified by NSN/Part Number 4820-01-060-9271 and are requested under purchase request 7011410569. This federal solicitation was posted on August 25, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Government of Jamaica → Petrojam Limited

Same awarding agency

Supply of Specialty Welding Materials and Custom Metal ComponentsPetrojam Limited, under the Government of Jamaica, is seeking a subcontractor for the supply of specialty welding materials and custom metal components. The scope of work involves providing high-grade, ASME and API compliant welding materials, custom-machined metal parts, and pre-fabricated clamp kits specifically designed for high-temperature and high-pressure refinery repair operations. This subcontract falls under NAICS code 423510 and was posted on August 25, 2026. The contract ensures that all supplied materials meet rigorous industry standards necessary for critical infrastructure maintenance within a refinery environment.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Conduct of Repairs to Exchangers E-22 and E-27

Solicitation # GOJEP-10289045

POSTED

DEADLINE

Procurement of P-202A Mechanical Seals

Solicitation # GOJEP-9824979

POSTED

DEADLINE

Servicing of Vapourizers at Red Stripe LPG Tank Farm

Solicitation # GOJEP-9796002

POSTED

DEADLINE

Procurement of Photographic Services-Petrojam Limited

Solicitation # GOJEP-10008448

POSTED

DEADLINE

Procurement of Parts and Accessories for Fire Equipment Caterpillar Engines

Solicitation # GOJEP-4727072

POSTED

DEADLINE

ODOO ERP Subscription Pricing and Implementation for JARS

Solicitation # GOJEP-9875948

POSTED

DEADLINE

Chemical Analysis of Spent Reformer Catalyst

Solicitation # GOJEP-9854072

POSTED

DEADLINE

On-Site Laboratory Evaluation Support (Travel & Logistics)Petrojam Limited, an agency of the Government of Jamaica, is seeking a subcontractor to provide comprehensive local logistical support for on-site auditors. The primary scope of work involves managing travel coordination, arranging transportation, and facilitating site access arrangements within Jamaica to ensure the efficient execution of laboratory evaluations. This subcontract opportunity is categorized under NAICS code 561510 and was posted on August 11, 2026. Interested parties can find further details and application instructions through the Government of Jamaica's electronic public procurement system.

Travel Agencies

POSTED

DEADLINE

Accreditation Compliance Reporting and DocumentationThis subcontract, titled Accreditation Compliance Reporting and Documentation, is issued by Petrojam Limited under the Government of Jamaica. The primary objective of the agreement is the development of formal compliance reports and detailed documentation that summarize assessment findings, identify non-conformities, and provide strategic recommendations necessary for maintaining or achieving accreditation status. The contract is categorized under NAICS code 541611, indicating it falls within professional administrative and management consulting services. It was posted on August 11, 2026, and is managed through the Government of Jamaica's electronic public procurement system.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

ISO/IEC 17025 Interim Accreditation AssessmentPetrojam Limited, under the Government of Jamaica, is seeking a subcontractor to perform an interim accreditation assessment for a laboratory to ensure compliance with ISO/IEC 17025 standards. The scope of work involves a comprehensive evaluation of the facility, focusing on document reviews, process assessments, and the identification of gaps within both technical and quality management systems. This subcontract falls under NAICS code 541380 and was posted on August 11, 2026. The primary objective is to determine the laboratory's readiness for formal accreditation by analyzing current operational procedures against international standards.

Testing Laboratories and Services

POSTED

DEADLINE