Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Custom Metal Sculpture Design and Fabrication

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement with the City of South Lake Tahoe involves the design, engineering, and fabrication of a custom powder-coated steel panel sculpture titled Flower Moon. The artwork will incorporate natural motifs including mountains, flowers, a sunset, and wildlife, requiring the use of precision cutting, shaping, and welding techniques to complete the installation. The project is categorized under NAICS code 332323 and is scheduled for performance in South Lake Tahoe, California. Posted on August 8, 2025, the contract focuses on the technical execution of a specialized metal sculpture to enhance the local environment.

General Info

Design, engineering, and fabrication of Flower Moon steel sculpture for South Lake Tahoe.

Agency

California → City of South Lake Tahoe

NAICS

332323 - Ornamental and Architectural Metal Work Manufacturing

Place of Performance

South Lake Tahoe, CA, TBD

Set-Aside

NONE

Documents

This scope was carved out of Publicly Visible Art Permit for Metal Sculpture Titled Flower Moon.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 8

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → City of South Lake Tahoe

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → City of South Lake Tahoe

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, engineering, and fabrication of a custom powder-coated steel panel sculpture titled *Flower Moon*, featuring natural motifs such as mountains, flowers, sunset, and wildlife, using precision cutting, shaping, and welding techniques.

Similar Contracts

Same NAICS industry code

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0350

Solicitation SPE8E8-27-T-0350 is a procurement request by the DLA Distribution San Joaquin for 37 electrical immersion heating elements, identified by NSN 4520-01-530-8693. The contract specifies a delivery timeframe of 167 days after order, with a need ship date of April 26, 2027. Performance is based on FOB Origin terms, while inspection and acceptance will occur at the destination in Tracy, California. The procurement incorporates technical and quality requirements from the DLA Master List, and requires compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to DFARS regulations regarding the Berry Amendment, Buy American Act, and cybersecurity reporting under DFARS 252.204-7012. Offerors must submit quotes through the DLA Internet Bid Board System and provide necessary small business representations. The contract is managed by Alexis Selby at DLA Troop Support, Construction and Equipment.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0367

This solicitation, issued by DLA Troop Support Construction and Equipment, is a Request for Quotations for the procurement of 24 electrical immersion-type heating elements, identified by NSN 4520-01-597-3589. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332323. Delivery is required within 167 days after order, with the place of performance and delivery located at DLA Distribution San Diego, California. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and comply with DLA packaging requirements under RP001. Technical and quality requirements are governed by the DLA Master List (RA001), and the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding the safeguarding of covered defense information and the prohibition of certain telecommunications equipment. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

POSTED

about 3 hours ago

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0352

This fixed-price solicitation, issued by DLA Troop Support Construction and Equipment, is for the procurement of three non-immersion electrical heating elements identified by NSN 4520-01-530-8694. The contract is designated as a HUBZone set-aside under NAICS code 332323. Delivery is required within 167 days after receipt of order, with a specified need ship date of April 26, 2027, and a final required delivery date of May 26, 2027. The items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA packaging requirements RP001 and the DLA Master List of Technical and Quality Requirements taking precedence. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and stringent cybersecurity requirements such as DFARS 252.204-7012 for safeguarding covered defense information. Offerors are encouraged to submit quantity ranges via DIBBS and must provide full data packages if proposing alternate parts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Tapered Aluminum Street Light Pole SupplierThis subcontract agreement establishes the supply of seamless, tapered aluminum street light poles for prime contractors working on Pierce County Planning and Public Works projects. The scope of work includes the fabrication of one-piece tubes using Aluminum Alloy 6063-T6, heat-treating shafts to T6 temper, and manufacturing cast socket base flanges from Alloy 356. All products must adhere to AASHTO LRFD-LTS-1 standards to withstand ultimate wind speeds of 115 mph. The supplier is responsible for delivering finished poles in lengths of 35 and 40 feet on a FOB Destination basis. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 13, 2026.

Planning and Public Works

POSTED

about 4 hours ago

DEADLINE

GDOT-Certified Guardrail Material SupplyThis subcontract opportunity with the City of Fairburn requires a GDOT certified supplier to provide new and unused guardrail and anchorage materials for prime contractors. The scope of work includes the sourcing and delivery of Type T and Type W guardrail components, as well as TP T1 and TP T2A anchorage, to designated project sites or storage yards. All provided materials must be certified and strictly adhere to GDOT Standard Specifications. The solicitation was posted on October 28, 2026, with a response deadline of December 7, 2026. This procurement falls under NAICS code 332323 and is specifically intended for the supply of critical infrastructure materials to support municipal projects within the state of Georgia.

City of Fairburn

POSTED

about 4 hours ago

DEADLINE

in about 1 month

CMP Pipe SupplyThis subcontract agreement involves the supply of Corrugated Metal Pipe for prime contractors working on projects managed by the Henry County Board of Commissioners in Georgia. The scope of work requires the furnishing and delivery of 208 total linear feet of 36-inch and 42-inch pipe to various project sites within Henry County, ensuring all materials meet GDOT specifications. The opportunity was posted on October 28, 2026, with a response deadline set for November 25, 2026. Classified under NAICS code 332323, this contract focuses specifically on the procurement and logistical delivery of specified piping materials to support local infrastructure development.

Henry County Board of Commissioners

POSTED

about 6 hours ago

DEADLINE

Custom Steel Security Gate FabricationThis subcontract for Custom Steel Security Gate Fabrication involves the production and delivery of two powder-coated steel double swing gates for Valley Center Pauma USD facility projects. Each gate must measure approximately 18 feet wide by 5 feet tall. The project strictly prohibits the use of chain link materials and requires full compliance with California Air Resources Board standards. The selected subcontractor is responsible for the complete fabrication and delivery of the finished gates to the project site in Valley Center, California. This opportunity is categorized under NAICS code 332323 and is intended for prime contractors managing the district's facility improvements.

Valley Center Pauma USD

POSTED

about 6 hours ago

DEADLINE

Supply of Ameristar Impasse Trident (or Equal) Fencing ComponentsThis subcontract, issued by the Department of Veterans Affairs Network Contract Office 01, requires the supply of high-security fencing materials for projects at the VA Boston Healthcare System. The scope of work involves providing Ameristar Impasse Trident components or approved equivalents, specifically including fence panels, posts, brackets, rails, and fasteners. All materials must feature corrosion-resistant and tamper-resistant hardware, and outdoor steel components must have protective coatings that match existing finishes. The selected provider is responsible for delivering these materials to the Brockton VA Campus and providing all necessary manufacturer product documentation and warranties. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332323. Interested parties must submit their responses by November 5, 2026, at 3:00 PM. The contract focuses on ensuring the security and durability of the facility's perimeter through the procurement of specialized, high-grade fencing hardware.

241-NETWORK Contract Office 01 (36C241)

POSTED

about 8 hours ago

DEADLINE

Custom Schedule 40 Steel Gate FabricationThis subcontract involves the fabrication of four custom steel barrier access gates for prime contractors working on City of Victorville park projects. The gates must be constructed using Schedule 40 steel pipe with structural framing, bracing, and supports designed to minimize deflection. Each unit requires a yellow protective industrial coating and the integration of all necessary hinges, stops, brackets, and locking provisions. The project mandates strict compliance with the Build America, Buy America Act. Interested parties must submit their responses by December 3, 2026, for this fabrication effort categorized under NAICS code 332323. The final deliverable consists of four fully fabricated steel gates meeting all specified structural and coating requirements.

City of Victorville

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Custom Decorative Guardrail SystemsThis subcontract involves the fabrication and installation of custom decorative guardrail systems for prime contractors working on City of Danville Riverfront Park projects. The scope of work includes the production of steel posts and rails, the integration of stainless steel mesh infill panels, and the execution of core drilling into existing walls with a six-inch embedment utilizing non-shrink epoxy grout to ensure a fully installed and aligned system. Compliance requirements are strict, necessitating full adherence to OSHA safety standards and mandatory background certifications for all employees, specifically requiring no felony convictions within the last seven years. Interested parties must respond by November 17, 2026, to provide these specialized fabrication and installation services within the City of Danville.

City of Danville

POSTED

about 22 hours ago

DEADLINE

IFB-26-27-031-Riverfront Park Guardrail and Fence Improvements

Solicitation # IFB-26-27-031

The City of Danville, Virginia, is soliciting bids under IFB-26-27-031 for the construction of decorative guardrail and fence improvements at Riverfront Park, specifically near the Martin Luther King Jr. Memorial Bridge. The scope of work includes the installation of custom fabricated decorative guardrails with steel posts and stainless steel mesh infill panels, as well as a 48-inch-high decorative welded-wire fence system. Key technical requirements include core drilling with a minimum 6-inch embedment using non-shrink epoxy grout, site restoration including grading and mulch replacement, and final alignment of all components. The project must be completed within 60 consecutive calendar days from the Notice to Proceed. The contract will be awarded to the lowest responsible and responsive bidder, with consideration also given to the proposed completion time. Bidders must provide a 5% bid bond, and the successful contractor must provide performance and payment bonds for 100% of the contract amount. A 5% retainage will be withheld from each invoice until final acceptance. Compliance requirements include adherence to OSHA safety standards, non-discrimination policies, and a mandatory employee background certification stating that staff have not been convicted of a felony in the past seven years. Bids must be submitted by November 17, 2026, via the eVA portal or as a sealed paper submission.

City of Danville

POSTED

about 22 hours ago

DEADLINE

Metal Beam Guardrail Material SupplierThis subcontract opportunity is for a Metal Beam Guardrail Material Supplier to provide galvanized steel beam rails, steel posts, and specialized mounting hardware for prime contractors working on Texas Department of Transportation projects within the Paris District. The selected supplier is responsible for the procurement or fabrication of these components and must ensure all materials strictly adhere to TxDOT approved product lists and specifications. The scope of work includes the delivery of all required guardrail materials directly to project sites or designated staging areas located in Lamar County, Texas. Interested parties must submit their responses by November 19, 2026, to support these highway infrastructure projects.

Texas Department of Transportation

POSTED

about 24 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Custom Pull Box Fabrication (ARMORCAST A6001865T-01 Spec)

City of Glendale

POSTED

about 1 year ago

CLOSED

about 1 year ago

Aluminum and Metal Fabrication for Signs

Wexford Missaukee Intermediate School District

POSTED

about 1 year ago

CLOSED

about 1 year ago

Protective Cover and Enclosure Construction

Caltrans, District 5 - San Luis Obispo/Santa Barbara

POSTED

about 1 year ago

DEADLINE

Supply of Target Accessories (Stands, Hangers, Mounts)

Virginia Department of Military Affairs

POSTED

about 1 year ago

CLOSED

about 1 year ago

Fabrication and Installation of Insulated Trailer Panels

California Department of Food & Agriculture

POSTED

about 1 year ago

CLOSED

about 1 year ago

Folding Partition Replacement

Solicitation # 26.02

Rochester Community Schools

POSTED

about 1 year ago

CLOSED

about 1 year ago

Traffic Sign Removal and Installation

South Dakota Department of Transportation

POSTED

about 1 year ago

CLOSED

about 1 year ago

Aluminum Tool Box Supply and Mounting

Cuyahoga County

POSTED

about 1 year ago

CLOSED

about 1 year ago

Supply of NEMA-Rated Enclosures and Mounting Hardware

San Antonio Water System

POSTED

about 1 year ago

CLOSED

about 1 year ago

Manufacture and Supply of Aluminum Diamond Plate Toolboxes

Florida Department of Agriculture and Consumer Services (FDACS)

POSTED

about 1 year ago

CLOSED

about 1 year ago

Artwork Fabrication & Material Supply

POSTED

about 1 year ago

CLOSED

about 1 year ago

LOUVER, 4" DIA. - ref 2094029

Solicitation # 2094029

Dallas Area Rapid Transit

POSTED

about 1 year ago

CLOSED

about 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS