This Government Contract opportunity from Connecticut was posted on January 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Custom Seating and Occupant Restraint Systems

Closed

State & Local

Submission Closed01/29/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113

New

DIBBS

SPONGE, SURGICAL SCRUBThe contract specifies the procurement of surgical scrub sponges configured in standardized trays, each containing six small wing sponges, three sponge sticks, four ounces of PVP-iodine scrub, two ounces of PVP-iodine paint, two absorbent towels, two blotting towels, two cotton-tip applicators, a four-compartment tray, a pair of vinyl gloves, and CSR wrap. All components are latex-free and packaged as a complete unit for immediate surgical use. The product is supplied in packages of twenty trays each, with all containers marked with the lot control number and manufacture date prefixed by MFD to ensure traceability and compliance. The item is identified by NSN 6530-01-689-4443, with a quantity of five packages required and a delivery deadline of five days after award. The solicitation, issued under SPE2DH-26-T-5174, is governed by technical and quality requirements from the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract may involve covered defense information, and bidders must clearly identify the source and part number being offered. The solicitation was posted on July 14, 2026, with responses due by July 21, 2026, and performance is to occur at FPO with a zip code of 96678-1704. The procuring agency is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SUPPORT, PELVICThe contract is for the procurement of pelvic support binders, specifically designed for emergency pelvic stabilization, with each unit intended for temporary use over 24 to 48 hours. The product is black in color, one-size-fits-all, and must be cut to fit individual patients, with a clear designation as single-use only. It is intended to protect against pelvic hematomas and provide pain relief, meeting critical field medical needs. The item is identified by NSN 6515-01-560-0290, with a quantity of seven units requested under purchase request 7017481006, and delivery must be completed within 20 days of award. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring secure, undamaged delivery via common carriers to Fort Campbell, Kentucky. The product must be properly sealed in unit containers and packed in suitable shipping containers suitable for domestic or export transport. Bidders are required to specify the source and part number being supplied and must adhere to all DLA technical and quality requirements referenced in the DLA Master List, with the applicable revision determined by the solicitation or award date. The acquisition falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain, with Colin Owens as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

PAD, HOT-COLD TREATMENTThis contract specifies the procurement of noncirculating hot-cold therapy gel packs for medical use, designed to provide convenient and effective pain relief. Each pack is nontoxic, nonirritating, insulated, and reusable, measuring 6.6 inches by 9 inches, and is supplied in cases of 24 units with a total order quantity of 12 cases. The product is classified as a Class I medical device regulated by the FDA, requiring compliance with registration, listing, labeling, and GMP standards even though a 510(k) premarket notification is not mandated. The supplier, Cardinal Health, Inc., must adhere to the latest Medical Marking Standard No. 1 for all labeling and packaging, superseding all references to MIL-STD-129. Packaging and shipping must follow DLA’s packaging requirements and MIL-STD-2073-1E standards, ensuring commercial-grade, sealed unit containers and robust exterior shipping containers capable of safe delivery at lowest freight rates. All items must be palletized per DLA guidelines and shipped via traceable means, excluding parcel post. Delivery is required FOB destination within 20 days, with no tolerance for quantity variance from the ordered 12 cases. The delivery and marking address is Fort Campbell, Kentucky, and the shipment must be directed to the specified military unit. The contract mandates full compliance with technical and quality requirements referenced in the DLA Master List, and suppliers must ensure proper application of the special marking code ZZ-ZZ for any additional requirements. The product is identified by NSN 6530-01-723-6237 and procurement request number 7017466972, and the contracting officer must submit an EBS referral to confirm FDA compliance before award. The solicitation was issued under contract number SPE2DH-26-T-5162, with a required delivery date of July 15, 2026, and responses due by July 21, 2026. All documentation, packaging, and marking must strictly adhere to established DLA medical procurement standards to ensure acceptance and traceability through the defense supply chain.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SHEET, BURN-TRAUMA DRESThe product is a sterile burn-trauma dressing sheet measuring 60 by 90 inches, constructed from combed cotton and polyester with a thread count of 180 per square inch, designed for use on large body areas to prevent infection when applied either wet or dry. Each sheet is individually packaged and sold as a unit, with the specific item identified by NSN 6510-01-194-0252 and a procurement quantity of six units. The purchase is governed under solicitation SPE2DS-26-T-232E, issued on July 14, 2026, with a response deadline of July 20, 2026, and delivery required within 20 days of award. Technical and quality standards referenced by R and I identifiers are incorporated from the DLA Master List of Technical and Quality Requirements, with compliance based on the version in effect at the time of solicitation or award. Packaging must conform to DLA requirements, and non-accepted supplies must have all government identification removed. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance delivery to FPO, ZIP 96691-3300, and primary point of contact Tiffany Parker at the provided email and phone number.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BANDAGE, ELASTICThe contract specifies the procurement of elastic bandages, designated as ACE WRAP, 6 inches in width, washable, and intended for use as a pressure bandage, support, or binder. Each unit is individually wrapped in flesh color and sold in packages of ten, with the unit of issue being the package. The product must have a minimum shelf life of twenty-four months, and no more than three months may have elapsed between the manufacturer’s date and the delivery date to the government. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. The item is identified by NSN 6510-00-935-5823, with a quantity of five packages requested under purchase request 7017485233. Delivery is required within twenty days of award, and performance is directed to Fort Bragg, North Carolina, 28310. The solicitation, numbered SPE2DS-26-T-231A, was posted on July 14, 2026, with responses due by July 20, 2026, under the NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain, and coordinated by point of contact Kendall Jones.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days

General Info

Agency

Connecticut Aging & Disability Services View Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

Bristol, CT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 14

subcontract

Response DeadlineJan 29

Deadline has passed

Submission Closed

01/29/2026, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyConnecticut Aging & Disability Services

ContactsNo contacts available

OfficeN/A

Organization / Agency

Connecticut Aging & Disability Services

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Design and install specialized seating and securement systems for wheelchair users, ensuring safety and accessibility in modified vehicles.