Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CUSTOM TEST CABINET

Active
N0016426Q0269Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting bids for a custom test cabinet under a 100% small business set-aside contract with solicitation number N0016426Q0269, issued under FAR Part 12 as a commercial acquisition. The requirement, classified under NAICS code 337215 and FSC/PSC 7125, mandates a firm fixed price proposal from properly registered small businesses in the System for Award Management, with all offers due by August 5, 2026, at 4:00 PM Eastern Time. Proposals must be submitted via email to Danielle Richardson at danielle.n.richardson12.civ@us.navy.mil and must fully comply with the specified salient characteristics. Interested vendors are required to regularly monitor sam.gov for any amendments or updates prior to the deadline, as changes issued after the closing date will only be shared with respondents who have already submitted a quote. The place of performance is located in Crane, Indiana, and the contract is managed by the Department of Defense through the NSWC Crane office.

General Info

U.S. Navy seeks small business bid for custom test cabinet by August 5, 2026, firm fixed price, Crane, Indiana.

Agency

Department Of Defense → Nswc CraneView Agency

NAICS

337215 - Showcase, Partition, Shelving, and Locker ManufacturingView NAICS

Place of Performance

Crane, IN, 47522, USA

Set-Aside

SBA

Documents

(4)

26Q0269_SOL_EVALUATION+CRITERA_ATT+1.pdf

PDF

26Q0269_SOL_SPECS_ATT+2.pdf

PDF

N0016426Q0269_SYNOPSIS.pdf

PDF

Solicitation+-+N0016426Q0269.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts1 person available
OfficeCRANE, IN, 47522-5001, USA
Organization / Agency
Department Of Defense → Nswc Crane
View Agency Profile
Office AddressCRANE, IN, 47522-5001, USA
Contacts
Danielle Richardson
contact@example.gov

Full Description

Show more

N0016426Q0269 – 100% SMALL BUSINESS SET ASIDE -CUSTOM TEST CABINET– FSC/PSC 7125 - NAICS 337215
ISSUE DATE 24 JULY 2026 – CLOSING DATE 05 AUGUST 2026 – 4:00 PM Eastern Time


ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for a competitive, firm fixed price, commercial, 100% small business set aside acquisition of a custom test cabinet in accordance with Salient Characteristics.



Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov.



This solicitation is being issued pursuant to the procedures at FAR Part 12 as written. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N0016426Q0269 is hereby issued as an attachment hereto.



All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation.
For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award.



Offers shall be e-mailed to Danielle.n.richardson12.civ@us.navy.mil. All required information must be received on or before AUGUST 05, 2026, 4:00 pm EASTERN TIME.

Similar Contracts

Same NAICS industry code

NAICS: 337215
New
SLED
Casework and Millwork Fabrication/InstallationThe contract pertains to the custom fabrication and installation of built-in cabinetry, reception desks, storage units, and decorative millwork, all classified under NAICS code 337215 for millwork fabrication. It is structured as a subcontract opportunity posted by the state of Utah, with a response deadline of August 5, 2026, at 4:00 PM. The work must be performed locally within Utah, though the exact city or zip code is unspecified, and all materials and labor must meet custom specifications aligned with project requirements. The bid must be submitted through the designated online platform by the stated deadline, with no set-aside provisions or specific organization type restrictions indicated. No point of contact details are provided, so inquiries should be directed via the posted UI link.
Utah

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 337215
New
DIBBS
RACK, STORAGE, SMALL ARMThe contract specifies the procurement of storage racks designed for small arms, governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other packaging specifications. All items must comply with DLA packaging guidelines including MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging materials, with palletization strictly adhering to RP001 requirements. The items are classified as Category I munitions under DODM 4160.28-Vol.3, requiring demilitarization procedures upon disposition, and any non-accepted supplies must have government identification removed. The contract references numerous technical data packages tied to specific drawing numbers with revision dates as of May 7, 2024, and includes one non-government standard, NAS9301. The unit of issue is each, with a quantity of 15 units priced at $15.00 each, totaling $225.00, though the quantity is estimated and not guaranteed. Delivery is scheduled for 107 days after award, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The contract is issued under solicitation SPE7LX-26-U-9008 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and falls under NAICS code 337215 for manufacturing related to metalworking machinery.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 337215
New
SLED
FY2026/DBH/SEH/NSD/New Racks/Hand Trucks and Etc./N.DeBoardThe District of Columbia’s Behavioral Health agency is forecasting a procurement for new storage racks, hand trucks, and additional kitchen equipment necessary for operational needs. This anticipated contract, listed under the title FY2026/DBH/SEH/NSD/New Racks/Hand Trucks and Etc./N.DeBoard, is scheduled for release in fiscal year 2026 with a posted date of July 23, 2026, and is currently in the forecast phase without a solicitation number or set-aside details. The equipment will support kitchen infrastructure and material handling within agency facilities, though the exact locations of performance and specific requirements are not yet defined. No point of contact information is provided at this stage, and the contract opportunity is accessible via the District’s public procurement portal for future reference.
Behavioral Health (DBH)

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 337215
New
Federal
Archival/Museum Display Cases
Defense Threat Reduction Agency

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 337215
New
Federal
10--RACK,STORAGE,SMALL ARM
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 337215
New
Federal
LOCKERS
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 337215
New
Federal
AD / FURNITURE DELIVERY AND INSTALL
FA2823 Aftc Pzio

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 337215
New
International
EV385-081909 PSIB Furniture Categories 3 and 4All bids for the delivery and installation of office furniture in Prince Albert, Saskatchewan, must be submitted by July 29, 2026, at 2:00 p.m. EDT; any submissions received after this time will be deemed non-responsive, regardless of deadlines listed on external platforms like Ariba Discovery or CanadaBuys. This solicitation, identified as EV385-081909 PSIB Furniture Categories 3 and 4 with solicitation number WS5715686633, is issued by Public Services and Procurement Canada on behalf of Indigenous Services Canada, with a required delivery date of January 8, 2027. The opportunity is hosted exclusively on SAP Ariba without any fees for access or participation, and responses must follow the official tender notice on the SAP Business Network. The NAICS code for this contract is 337215, and the primary point of contact is Eddie Beddall, Contracting Authority, reachable at eddie.beddall@tpsgc-pwgsc.gc.ca.
Department of Public Works and Government Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 337215
New
International
E60HN-26CFWL - RFSO - Weapon LockersThe solicitation E60HN-26CFWL for Weapon Lockers is issued under the reference number WS5760989938 by the Government of Canada through the Department of Public Works and Government Services. The opportunity was posted on July 17, 2026, with a response deadline set for August 12, 2026, at 7:00 PM Eastern Time. The NAICS code 337215 identifies this as a procurement related to metal fabrication for furniture and fixtures, specifically targeting secure weapon storage solutions. Performance of the contract is expected to take place within Canada, with no specific city or postal code identified beyond the country level. The primary point of contact for inquiries is Alexandra Nadeau, Contracting Authority, reachable via email at alexandra.nadeau@tpsgc-pwgsc.gc.ca. This solicitation is open to federal procurement and does not designate a specific set-aside category for small businesses or other demographic groups. The full details and documentation can be accessed through the CanadaBuys platform using the provided link.
Department of Public Works and Government Services

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 337215
New
Federal
Heavy-Duty Tool Cabinet Supply and AssemblyThe contract calls for the supply and assembly of two heavy-duty industrial tool cabinets designed to meet Lista Cabinet performance standards, featuring pegboard backing, locking doors, casters, and robust construction to ensure durability and reliability in demanding environments. These cabinets must be fully assembled and ready for immediate use upon delivery, with all components meeting stringent quality and functional benchmarks associated with high-end industrial storage solutions. The requirement is part of a Total Small Business Set-Aside under the NAICS code 337215, exclusively open to small businesses to promote economic opportunity within the sector. This subcontract is issued by the Department of Defense through DLA Distribution, with performance required at the New Cumberland, Pennsylvania location, zip code 17070. The solicitation was posted on July 22, 2026, and responses are due by 5:00 PM on July 27, 2026, providing a five-day window for submission. Interested vendors must be prepared to demonstrate compliance with all technical specifications, delivery timelines, and small business certification requirements to be considered eligible under the set-aside provisions. The award will be made to a qualified small business capable of delivering a fully functional, secure, and long-lasting tool cabinet system to support federal operations.
DLA Distribution

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 337215
New
Federal
Custom Industrial Storage Cabinet FabricationA heavy-duty industrial storage cabinet is to be fabricated and delivered with a butcher block top, locking drawers, casters, and overhead cabinets, meeting Lista Cabinet quality and design standards. The work is solicited as a subcontract under a Total Small Business Set-Aside, exclusively for small business concerns, and is classified under NAICS code 337215 for wood kitchen and bath cabinet manufacturing. The contract requires precise adherence to specified materials and construction methods to ensure durability, functionality, and aesthetic alignment with recognized industrial-grade benchmarks. Performance must be completed and delivered to New Cumberland, Pennsylvania, with a response deadline of July 27, 2026, and the solicitation is managed by the Department of Defense through DLA Distribution.
DLA Distribution

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 337215
New
Federal
DDSP Tool CabinetsThis solicitation, identified as SP330026Q0185, seeks firm-fixed-price purchase orders for specialized storage cabinets to be delivered and installed at DLA Distribution Susquehanna Pennsylvania in New Cumberland, PA. The procurement is exclusively reserved for small businesses under a Total Small Business Set-Aside, categorized under NAICS code 337215 for Metal Cabinet and Lockers Manufacturing. The contract will be awarded via Standard Form 1449 and is not subject to Defense Priorities and Allocations System rating. The requested equipment includes three distinct cabinet configurations: a 144-inch wide unit with a butcher block top, locking drawers rated for 440 pounds, and overhead storage with peg board backing; a 72-inch wide cabinet with overhead storage and casters; and a 47-inch wide vertical cabinet with six shelves, required to perform equivalently to Lista-brand cabinets. All units must include locking mechanisms and be mounted on casters for mobility. The Government intends to evaluate offers based on technical acceptability and price, consistent with a Lowest Price Technically Acceptable approach, though the formal evaluation factors are not explicitly stated in the documentation. The solicitation was issued on July 22, 2026, with a response deadline of July 27, 2026, following multiple amendments that refined cabinet specifications, corrected schedule details, and extended submission timelines. Place of performance is clearly defined as the DDSP facility in New Cumberland, Pennsylvania, and while delivery terms include FOB and invoicing procedures, no specific FOB point, payment office, or invoice submission method is identified. Technical requirements rely on brand equivalence rather than formal military or industry standards, and no packaging, marking, barcoding, or preservation specifications are included. The contracting officer point of contact is Samuel Tustin of DLA Distribution’s Acquisition Operations, J-7. Offerors must acknowledge amendments and submit responses in compliance with administrative guidance, but no representations, certifications, UEI/CAGE codes, or socioeconomic certifications are required to be completed at the proposal stage. Neither the estimated contract value nor detailed pricing is provided, rendering any cost estimate speculative. The acquisition is administrative in nature, governed primarily by FAR 43.103(b) for modifications, with no special requirements for security, key personnel, options, or conflicts of interest.
DLA Distribution

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 334413
New
Federal
POWER TRANSISTOR TO-3 PACKAGEThe U.S. Navy’s Naval Surface Warfare Center Crane is soliciting bids for Power Transistor TO-3 Packages under a 100% small business set-aside contract, identified by solicitation number N0016426Q0270 and classified under NAICS code 334413. This is a firm-fixed-price, commercial acquisition governed by FAR Part 12, with the requirement including not only the base contract but also three optional additional years. All offerors must be currently registered in the System for Award Management (SAM) and must submit their proposals via email to Danielle Richardson at danielle.n.richardson12.civ@us.navy.mil no later than August 5, 2026, at 4:00 PM Eastern Time. The solicitation is exempt from public synopsis under FAR 5.202(a)(13), and prospective vendors are solely responsible for monitoring the SAM.gov website for any amendments or updates issued before the closing date. Changes occurring after the deadline will only be shared with those who submitted quotes and may impact future discussions or award decisions. Performance will be carried out at Crane, Indiana, with the point of contact for all inquiries being Danielle Richardson.
Semiconductor and Related Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
Federal
Advanced Notice for N0016426R3122The U.S. Navy’s Naval Surface Warfare Center, Crane Division, is issuing a draft advance notice for a potential solicitation under SeaPort NxG to procure professional, engineering, technical assessment, and management support services for the SWS Ashore, SLCMN, and SITP Programs. This requirement is exclusively open to current SeaPort NxG Multiple Award Contract holders, and only inquiries from these qualified entities will be accepted. The solicitation will be conducted as a full and open, unrestricted competition with no set-aside provisions, targeting specialized expertise in systems hardware and test support. All questions must be submitted by the designated deadline of July 31, 2026, at 7:00 PM Eastern Time, and while the government will review each submission, it reserves the right to not respond to all inquiries. The North American Industry Classification System code for this requirement is 541330, and performance will occur primarily at Crane, Indiana. The official solicitation number is N0016426SNB94, and the document was posted on July 24, 2026, with the primary point of contact being Bryce Jenkins, reachable via email at bryce.c.jenkins.civ@us.navy.mil or by phone at 812-381-5463. The contracting office is located at the NSWC Crane facility in Crane, Indiana, with a ZIP code of 47522-5001. This presolicitation serves solely to gather industry input to refine the final solicitation and does not constitute a commitment to award a contract. Potential offerors are encouraged to review the details on the SAM.gov portal using the provided UI link and ensure all submissions align with SeaPort NxG eligibility and timing requirements.
Engineering Services

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331110
New
Federal
STAINLESS STEELThe Naval Surface Warfare Center Crane is soliciting stainless steel under a total small business set-aside, with the solicitation number N0016426Q0230 and NAICS code 331110, exclusively for qualified small businesses. The requirement is for stainless steel plate in CRES 303, CRES 304L, or CRES 316 grades, delivered in specific configurations and quantities across multiple line items, with one line item covering shipping and another covering contractual data requirements A001 and A002. All deliveries must be FOB Destination to NSWC Crane’s Supply Operations Building 41 Receiving in Crane, Indiana, with a 20-week delivery period starting from the date of award. The contract is firm fixed price, and evaluation will use a Low Price Technically Acceptable approach, where quotations must first pass mandatory responsiveness and technical acceptability gates—such as submitting a fully completed SF 1449, product literature, a signed Technical Evaluation Matrix, and maintaining an active SAM registration—before any price comparison is made. Offerors must comply with strict packaging and handling standards including MIL-STD-147 Rev E, MIL-STD-15011 Rev K, and MIL-STD-23312 Rev E. Contractors must be properly registered in SAM.gov and provide their CAGE code with their offer, and failure to meet these registration requirements disqualifies the quotation. The solicitation incorporates numerous federal acquisition regulation clauses, including required representations related to cybersecurity (DFARS 252.204-7012 and DFARS 252.204-7008), security prohibitions (FAR 52.240-90 and FAR 52.204-90 under Deviation 2026-O0038), compensation of former DoD officials, whistleblower protections, prohibitions on acquiring covered telecommunications equipment, and representations regarding business operations with the Maduro regime. All quotes must be submitted via email to Heather Summers and Andrew Ficklin no later than July 24, 2026, at 12:00 AM Eastern Time. Amendments to the solicitation will be posted only on SAM.gov, and offerors are responsible for monitoring the site. Payments will be processed through Wide Area WorkFlow, requiring electronic submission of invoices and receiving reports, with email notifications
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334112
New
Federal
COMPUTER EQUIPMENT
Computer Storage Device Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
Federal
PURCHASE OF IMA
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 333515
New
Federal
THROUGH HOLE MINIATURE, MICROMINIATURE ELECTRONIC REPAIR STATION
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 332710
New
Federal
FAIRING CLEARBORE & ANTI-ABRASION PATCHESThe Naval Surface Warfare Center Crane is soliciting firm fixed-price quotations for 24 Nose Fairing Clearbores (Part Number 6234374-002) and 18 Anti-Abrasion Patches (Part Number 6237869-001), with delivery required on or before March 1, 2027, FOB Destination at Crane, Indiana. This procurement is a 100 percent small business set-aside under NAICS code 332710 and is being conducted under FAR Part 13 procedures as a written solicitation. All offerors must be actively registered in the System for Award Management (SAM) and the Joint Certification Program to access controlled attachments and qualify for award. A Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory, and compliance with safeguarding covered defense information standards is required per DFARS clauses. Each item must be uniquely identified with a two-dimensional data matrix symbol conforming to MIL-STD-130 and ISO/IEC 16022 standards, with full UII data reported to the DoD IUID Registry. Packaging and labeling must comply with MIL-STD-129 for shipment and storage, and all deliveries must be accompanied by material inspection and receiving reports submitted through Wide Area Workflow (WAWF). Offers must be submitted electronically to Christina Staggs at christina.l.staggs.civ@us.navy.mil no later than August 6, 2026, at 3:00 p.m. Eastern Time, and offerors are responsible for monitoring SAM.gov for any amendments. Evaluation will be based on technical approach, delivery capability, CMMC compliance, and price on a trade-off basis, with award anticipated without discussions. The Government will inspect and accept all items at the delivery site, and payment will be processed via WAWF using DoDAAC N62828. The contract incorporates numerous FAR and DFARS clauses, including those related to executive compensation reporting, subcontractor integrity, cybersecurity, and prohibition of certain contractor practices.
Machine Shops

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 331420
New
Federal
COPPER AND ALUMINUMThe U.S. Navy’s Naval Surface Warfare Center Crane is seeking to procure copper and aluminum under a total small business set-aside authorized under FAR 19.104-1, with the solicitation number N0016426Q0229 and NAICS code 331420. The requirement is being conducted under FAR 12.201-1 procedures, and responses must be submitted via email to Rebecca Helton and Andrew Ficklin no later than 12:00 AM Eastern Time on July 31, 2026. All offerors are required to be actively registered in the System for Award Management (SAM) and are responsible for monitoring Contract Opportunities on sam.gov for any amendments or updates prior to the closing date; only those who have submitted quotes will receive post-deadline modifications. Delivery is specified as FOB Destination to Crane, Indiana, 47522, with no additional details provided on packaging, inspection, acceptance, evaluation factors, or special requirements. No contract value, pricing data, or specific technical specifications are available in the solicitation materials, and no attachments, clauses, certifications, or administrative instructions are included or referenced. Primary point of contact for inquiries is Rebecca Helton, reachable by phone or email.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
Federal
Subcontract Management & Small Business Reporting
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 541512
New
Federal
Cybersecurity Compliance (CMMC/NIST SP 800-171) Support
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 518210
New
Federal
Online Course Content Delivery Platform Hosting
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 541611
New
Federal
First-Tier Subcontract Reporting and Compliance ManagementThe contract requires comprehensive administrative support for mandatory federal reporting obligations under the Federal Acquisition Regulation, specifically focusing on first-tier subcontract awards as outlined in FAR 52.204-10 and small business representation under FAR 52.219-28. This includes accurate and timely submission of all required data through the System for Award Management and the Federal Procurement Data System to ensure full compliance with government regulations. The scope encompasses monitoring subcontractor activities, collecting necessary documentation, verifying small business status, and maintaining records to support audits and regulatory reviews. The work is positioned under NAICS code 541611 and is being managed by the Naval Surface Warfare Center Crane Division within the Department of Defense. Performance is required at Crane, Indiana with a zip code of 47522. The opportunity was posted on July 22, 2026, and responses must be submitted by July 30, 2026, at 6:00 PM ET. This is a subcontract-related assignment with no set-aside designation, indicating it is open to all eligible providers capable of meeting the compliance and reporting demands outlined in the contract requirements.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details