This Government Contract opportunity from California was posted on January 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Custom Truck Body Fabrication & Integration

Closed

State & Local

Submission Closed02/27/2026, 11:29:59 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332323

New

SLED

Custom Decorative Guardrail SystemsThis subcontract involves the fabrication and installation of custom decorative guardrail systems for prime contractors working on City of Danville Riverfront Park projects. The scope of work includes the production of steel posts and rails, the integration of stainless steel mesh infill panels, and the execution of core drilling into existing walls with a six-inch embedment utilizing non-shrink epoxy grout to ensure a fully installed and aligned system. Compliance requirements are strict, necessitating full adherence to OSHA safety standards and mandatory background certifications for all employees, specifically requiring no felony convictions within the last seven years. Interested parties must respond by November 17, 2026, to provide these specialized fabrication and installation services within the City of Danville.

POSTED

DEADLINE

IFB-26-27-031-Riverfront Park Guardrail and Fence Improvements

Solicitation # IFB-26-27-031

The City of Danville, Virginia, is soliciting bids under IFB-26-27-031 for the construction of decorative guardrail and fence improvements at Riverfront Park, specifically near the Martin Luther King Jr. Memorial Bridge. The scope of work includes the installation of custom fabricated decorative guardrails with steel posts and stainless steel mesh infill panels, as well as a 48-inch-high decorative welded-wire fence system. Key technical requirements include core drilling with a minimum 6-inch embedment using non-shrink epoxy grout, site restoration including grading and mulch replacement, and final alignment of all components. The project must be completed within 60 consecutive calendar days from the Notice to Proceed. The contract will be awarded to the lowest responsible and responsive bidder, with consideration also given to the proposed completion time. Bidders must provide a 5% bid bond, and the successful contractor must provide performance and payment bonds for 100% of the contract amount. A 5% retainage will be withheld from each invoice until final acceptance. Compliance requirements include adherence to OSHA safety standards, non-discrimination policies, and a mandatory employee background certification stating that staff have not been convicted of a felony in the past seven years. Bids must be submitted by November 17, 2026, via the eVA portal or as a sealed paper submission.

POSTED

DEADLINE

Metal Beam Guardrail Material SupplierThis subcontract opportunity is for a Metal Beam Guardrail Material Supplier to provide galvanized steel beam rails, steel posts, and specialized mounting hardware for prime contractors working on Texas Department of Transportation projects within the Paris District. The selected supplier is responsible for the procurement or fabrication of these components and must ensure all materials strictly adhere to TxDOT approved product lists and specifications. The scope of work includes the delivery of all required guardrail materials directly to project sites or designated staging areas located in Lamar County, Texas. Interested parties must submit their responses by November 19, 2026, to support these highway infrastructure projects.

Texas Department of Transportation

POSTED

DEADLINE

Galvanized Fencing and Hardware SupplyThis subcontract for Galvanized Fencing and Hardware Supply supports prime contractors on California Military Department projects located at JFTB Los Alamitos in Orange. The scope of work involves the delivery of permanent fence components, including 9-gauge galvanized chain-link fabric, 12-gauge steel ties, barbed wire, and ASTM #1043 or #1083 round pipe or square tube posts, all of which must adhere to UFC 702 standards. The contractor is responsible for delivering all specified fencing materials and hardware directly to the site. A critical administrative requirement is the submission of material submittals, which must be provided within 10 working days of the project start date. The solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026.

California Military Department

POSTED

DEADLINE

Galvanized Pitch-of-Roof Track SupplyThis subcontract involves the fabrication and supply of specialized galvanized overhead door tracks for prime contractors working on Iowa Department of Transportation facility projects. The scope of work specifically requires the production of pitch-of-roof tracks that are custom-angled to meet precise roof pitch requirements and adhere to all approved design specifications. The selected provider is responsible for the delivery of these fabricated materials F.O.B Destination to the Repair Shop Annex. This procurement is categorized under NAICS code 332323, with a response deadline set for November 10, 2026.

POSTED

DEADLINE

Window and Door Frame ManufacturingThis subcontract for Window and Door Frame Manufacturing supports prime contractors working on property projects for the Nuneaton and Bedworth Borough Council. The selected provider is responsible for fabricating frames from uPVC, aluminum, or timber based on specific site measurements, applying factory finishes, and supplying all necessary associated hardware. All products must meet PAS 24 security certification standards and be delivered directly to the project site or the designated installer. The solicitation was posted on October 27, 2026, with a response deadline of December 18, 2026, at 12:00 PM. This opportunity falls under NAICS code 332323 and is managed by the Nuneaton and Bedworth Borough Council.

Nuneaton and Bedworth Borough Council

POSTED

DEADLINE

Aluminum Handrail Supply

Fws Contracting Activity

POSTED

DEADLINE

Prefabricated Steel Stair System Fabrication

Fws Contracting Activity

POSTED

DEADLINE

Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.

Nashville Electric Service

POSTED

DEADLINE

EC - MTE Railing Replacement Parts

Bureau of Reclamation

POSTED

DEADLINE

Site Furnishings and Memorial ArtThis subcontract agreement with the City of Saint Paul involves the procurement, supply, and installation of site benches and a bronze sculpture for Parks Department projects. The selected contractor will work under prime contractors to ensure all furnishings and memorial art are securely installed in strict accordance with provided memorial design specifications. The solicitation was posted on October 26, 2026, with a response deadline of November 18, 2026. Falling under NAICS code 332323, the scope of work focuses on the delivery and final installation of these specific site assets within the state of Minnesota.

POSTED

DEADLINE

Refuse Container Supply and MaintenanceThis subcontract focuses on the supply and maintenance of industrial metal refuse bunkers and bins for prime contractors working on California Department of Parks and Recreation projects. The scope of work includes providing the containers, performing periodic repairs and painting, and ensuring all units are finished with weather-resistant materials in State-specified colors to maintain functional and aesthetic compliance. The project is based in Riverside, California, and falls under NAICS code 332323. Interested parties must submit their responses by the deadline of November 13, 2026.

California Department of Parks & Recreation

POSTED

1 day ago

DEADLINE

in 16 days

AI Contract Overview

The contract calls for the design and fabrication of an all-steel multi-purpose truck body engineered to meet rigorous structural standards, with all welding performed to AWS D1.1 certification to ensure durability and safety. The body must include integral mounting systems designed specifically for the attachment of snow plow equipment and pavement marking systems, enabling dual functionality in winter maintenance and road signage operations. Structural reinforcements are required to support and maintain compliance with the vehicle’s gross vehicle weight rating, ensuring the body does not compromise the truck’s load capacity or operational integrity. Performance of the work is designated for San Bernardino, California, with a submission deadline of February 27, 2026, and the contract is classified as a subcontract under NAICS code 332323, which pertains to structural metal fabrication. The contracting entity is the Public Works – Operations division of the State of California, indicating this is part of a public infrastructure initiative. The body must be customized to meet operational demands, combining robust construction with precise integration of mission-critical equipment to support consistent performance across varied environmental and usage conditions.

General Info

All-steel truck body fabricated to AWS D1.1 standards for snow plow and pavement marking systems in San Bernardino.

Agency

California → Public Works - Operations

NAICS

332323 - Ornamental and Architectural Metal Work Manufacturing

Place of Performance

San Bernardino, CA, 92415-0835, USA

Set-Aside

NONE

Documents

This scope was carved out of PWG126-OPERA-6223.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPECIALTY TRUCK

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 27

subcontract

Response DeadlineFeb 27

Deadline has passed

Submission Closed

02/27/2026, 11:29:59 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → Public Works - Operations

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Public Works - Operations

Office AddressN/A

ContactsNo contact information available

Full Description

Design and fabrication of an all-steel multi-purpose truck body with AWS D1.1-certified welding, integrated mounting for snow plow and pavement marking systems, and structural reinforcement for GVWR compliance.