Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

CUTTER SET, HOLE

Open
SPE8E5-27-T-0577Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, solicitation SPE8E5-27-T-0577, is for the procurement of one hole cutter set designed for metals up to 0.1875 inches thick. The comprehensive kit includes a 115V, 60Hz, 1-phase magnetic mount drill motor with a hole capacity of 2.0625 inches in diameter and 3 inches in depth, a #3 Morse machine arbor, a hand-held tool arbor, a pilot for hole cutters, and necessary adapters. The set also includes a wide range of bits spanning from 0.4375 inches to 2.000 inches. The acquisition is a small business set-aside under NAICS code 333515, with a required delivery date of November 13, 2026, and a delivery timeline of 20 days. The contract mandates strict quality and logistics standards. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. Shipping must be conducted via traceable means to the destination in Decatur, Mississippi. Administratively, the contractor must use the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses include DFARS 252.225-7001 regarding the Buy American program and DFARS 252.204-7012 for safeguarding covered defense information.

General Info

Procurement of a specialized hole cutter set for metals by November 2026.

NAICS

333515 - Cutting Tool and Machine Tool Accessory Manufacturing

Place of Performance

14271 HWY 15, DECATUR, MS, 39327-9351, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first18 pages · rfq
High

Read the document

Due in 11 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 11 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown12 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA

Full Description

Show more
CUTTER SET,HOLE
CUTTER SET, HOLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
KIT INCLUDES: 1 EA. DRILL MOTOR MAGNETIC
MOUNT, HOLE CAPACITY OF 2.0625 IN. DIA. AND
3 IN. DEPTH; 115 V, 60 HZ, 1 PH
1 EA. OF THE FOLLOWING BIT SETS: 0.4375
IN., 0.5000 IN., 0.5625 IN., 0.6250 IN., 0.6875
IN., 0.7500 IN., 0.8125 IN., 0.8750 IN., 0.9375
IN., 1.0000 IN., 1.0625 IN., 1.1250 IN., 1.3125
IN., 1.3750 IN., 1.4375 IN., 1.5000 IN., 1.5625
IN., 1.6250 IN., 1.6875 IN., 1.7500 IN., 1.8125
IN., 1.8750 IN., 1.9375 IN., 2.000 IN.
2IN CAP. DEPTH; 1 EA. #3 MORSE MACHINE ARBOR;
1 EA. ARBOR FOR HAND HELD TOOLS;
INTENDED FOR METALS UP TO 0.1875 IN. THK.;
1 EA. PILOT TO ACCOMMODATE HOLE CUTTERS;
AND ADAPTERS NEEDED TO FACILITATE USE OF THE
BITS IN THE DRILL MOTOR, HAND ARBOR, AND MACHINE
ARBOR.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
HOUGEN MANUFACTURING, INC 63672 P/N 10940
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE8E5-27-T-0577
SECTION B
PR: 7019160724 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019160724 0001 KT 1.000
NSN/MATERIAL:3455012455500
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W35CL1
W8SH MS ARNG FMS 7
14271 HWY 15
DECATUR MS 39327-9351
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90NCT
W8SH MS ARNG FMS 7
14271 HWY 15
DECATUR MS 39327-9351
US
MARKFOR
W90NCT
W8SH MS ARNG FMS 7
14271 HWY 15
DECATUR MS 39327-9351
US
SPE8E5-27-T-0577
SECTION B
PR: 7019160724 PRLI: 0001 CONT’D
M/F: (TCN) W90NCT63110001
RDD:
PROJ: TP 3
SUPP ADD: W35KT6 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: RL
Need Ship Date:00/00/0000 Original Required Delivery Date:11/13/2026
SPE8E5-27-T-0577 NSN/Part Number: 3455-01-245-5500 Quantity: 1 KT Purchase Request: 7019160724QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS