Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CX300: For Testing the CM300/350 Radios

Active
FA850126Q0048Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through the Air Force Sustainment Center at Robins Air Force Base, Georgia, is seeking to procure the CX300 equipment specifically for testing CM300/350 radios. This acquisition is being handled as a Firm-Fixed Price contract under a sole source award to TESTFORCE USA INC., located in Addison, Texas. The solicitation is conducted in accordance with commercial product acquisition regulations and is set aside as a Total Small Business procurement. Interested vendors are required to submit their quotes by June 23, 2026, with submission via email to designated contract personnel. Vendors responding must demonstrate financial capability to fulfill the contract requirements, including providing a narrative explaining how they will meet financial obligations throughout the contract duration, along with substantiating documentation. The financial responsibility and capability of offerors will be assessed through a review team from the Defense Contract Management Agency as part of the evaluation process. This contract supports the testing and sustainment efforts related to specific radio equipment integral to Department of Defense operations.

General Info

DoD Air Force to procure CX300 for CM300/350 radio testing; sole source, small business.

Agency

Department Of Defense → FA8501 Opl Contracting Afsc/pzio

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals View NAICS

Place of Performance

Warner Robins, GA, USA

Set-Aside

SBA

Documents

(1)

Solicitation FA850126Q0048 for CX300 Testing CM300/350 Radios

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8501 Opl Contracting Afsc/pzio
Contacts2 people available
OfficeROBINS AFB, GA, 31098-1672, USA
Organization / Agency
Department Of Defense → FA8501 Opl Contracting Afsc/pzio
Office AddressROBINS AFB, GA, 31098-1672, USA
Contacts
Bobby Brett Mitchell
contact@example.gov
Stephanie Akles
contact@example.gov

Full Description

Show more

The Air Force Sustainment Center PZIOB, Robins AFB Georgia has a requirement to purchase CX300: FOR TESTING THE
CM300/350 RADIOS. This solicitation is being issued as a Request for Quote (RFQ) in accordance with (IAW) RFO part 12m Acquisition of Commercial Products and Commercial Services. This solicitation will result in a Firm-Fixed Price (FFP) Award. This solicitation is being solicited as a Sole Source acquisition using Other Than Full and Open Competition IAW RFO 12.102(a). Quotes are being requested IAW the attached solicitation document ( FA850126Q0048) 


Sole Source Award to: 


TESTFORCE USA INC. ( 7VPU9)


4553 Sunbelt Drive, Addison Texas 75001-5131


Provide CX300 in order to test the CM300/350 Radios. 


Quotes are being requested no later than 23 June 2026, 05 PM EST. Please submit quotes via email to the Contract Specialist, bobby.mitchell.8@us.af.mil, and the Contracting Officer, stephanie.akles.1@us.af.mil. 


IAW RFO 9.104-1, prospective vendors must provide documentation that demonstrates they have adequate financial resources, or the ability to obtain them, to perform the work required in this solicitation. Included in this documentation should be: 


1)    A narrative statement from your com­pany on how you can successfully cover your financial responsibilities if awarded this contract action. Your narrative should be able to explain how your company can carry that debt during and up to comple­tion of the contract.
2)    Any substantiating documentation that you feel would bolster your position. Examples of substantiating documentation can be found at R-DFARS 232.072-2.


A financial capability review will be re­quested through DCMA's financial capability review team to determine an offeror's financial capability as a part of the Government's evaluation quotes. 





Similar Contracts

NAICS: 334515
New
Federal
Maximize E1 Capability - E1 Thrust Measurement SystemThe contract involves the procurement and installation of a new E1 Thrust Measurement System aimed at maximizing the capability of the E1 test setup. This initiative is managed by the Stennis Space Center under the National Aeronautics and Space Administration (NASA). The project focuses on acquiring advanced equipment to enhance thrust measurement accuracy and performance during engine testing operations. Key details include the solicitation being forecasted with the NAICS code 334515, which relates to instrumentation and related manufacturing. The contract emphasizes modernization and capability enhancement at the Stennis Space Center site. Points of contact for the project include Brandon K. Ladner and Troy E. Miller, the latter serving as a Small Business Specialist, indicating an openness to small business involvement in fulfilling the contract requirements.
Stennis Space Center

POSTED

in 14 days

DEADLINE

N/A
View Details
NAICS: 334515
New
Federal
PXIe Discrete Input CardsThe Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey, plans to procure three PXI Discrete Input Cards (P/N 75G5-2-DT5DT5DT50FC10) from North Atlantic Industries Inc. on a sole-source basis. This procurement is necessary to replace the obsolete VXI cards with upgraded PXI cards as part of an engineering change proposal. The three Circuit Card Assembly spares are required to support the fleet based on reliability data, specifically the mean time before failure of the legacy Engine Test Instrumentation system that uses these parts. North Atlantic Industries is the sole provider capable of meeting the government's requirements due to their proprietary, patented Configurable Open Systems Architecture technology and exclusive intellectual property rights, including FPGA logic and board support packages, which no other vendor can replicate. The acquisition will be conducted under the authority of Title 10, U.S.C. Section 2304(c)(1) and FAR 6.302-1, which allows sole-source procurement when only one responsible source can fulfill the agency’s needs. Although this notice is not a request for competitive proposals, the government will accept responses within 15 days of the notice’s publication to consider whether competition is feasible. However, no solicitation will be issued for this contract. The designated points of contact for this procurement are Justin Panecki and Terrence Shearer at the Naval Air Warfare Center Aircraft Division, located at Joint Base McGuire-Dix-Lakehurst, New Jersey.
Navair Warfare Ctr Aircraft Division

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 334515
New
Federal
Sources Sought - 0.5mm Calibration KitThe National Institute of Standards and Technology (NIST) is conducting a sources sought market research to identify potential vendors capable of supplying a 0.5mm Calibration Kit in accordance with specified requirements. This is not a solicitation or request for quotation but a step to gather information on qualified businesses to inform the acquisition strategy, including the possibility of a small business set-aside. NIST invites responses from all interested and responsible firms, including those qualified under various small business designations, and the effort is aligned with NAICS code 334515 for instrument manufacturing. Responses must include company details such as size, location, manufacturing data, product specifications, lead times, and any relevant small business certifications, limited to five pages or less. Following this market research, NIST may issue a competitive procurement on the System for Award Management (SAM) website, potentially favoring small business vendors if multiple qualified candidates are identified. The product will be for use in Boulder, Colorado, and interested firms must submit capability statements by June 17, 2026. The goal is to obtain sufficient information to finalize acquisition plans while ensuring qualified vendors are considered to meet this technical calibration kit requirement. Contact information for inquiries is provided, highlighting the administrative and procedural nature of this engagement rather than an immediate contract award.
Department Of Commerce Nist

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
Federal
FiBO 250 InterferometerThe Naval Undersea Warfare Center Division Newport is seeking quotes under RFQ N66604-26-Q-0363 for the procurement of three FiBO 250 Interferometer Packages and associated adapter ferrules and connector adapters on a total small business set-aside basis. The FiBO 250 interferometers are required on a brand name, no-substitution basis to maintain compatibility with existing equipment in government use. Each interferometer package includes the FiBO 250 interferometer with fixed magnification, proprietary FiBO Code Software v3.1, calibration targets, a rugged carrying case, cabling, user documentation, a one-year hardware warranty, and a connector adapter. Additional line items include adapter ferrules and connector adapters as specified. Delivery is FOB destination to Naval Station Newport, Rhode Island, with a required delivery timeline of 10 weeks after receipt of order or sooner. Offerors must be registered in the System for Award Management and comply with a range of applicable Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) provisions, including cybersecurity requirements aligned with CMMC Level 2. The contract is a Firm Fixed Price award to the Lowest Price Technically Acceptable offeror. Technical acceptability is contingent upon adherence to brand name restrictions, required delivery dates, and satisfactory past performance as assessed through the Supplier Performance Risk System. Quotes including price with shipping, point of contact details, contractor information, and CMMC unique identifiers must be submitted via email by 2:00 PM EST on June 22, 2026. Payment will be processed through Wide Area Workflow (WAWF). An exception from Electronic and Information Technology Section 508 requirements applies to this procurement.
Nuwc Division Newport

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
Federal
66--PANEL,TEST,ELECTRICThis contract involves the procurement of six units of an electric test panel, identified by NSN 6625012413212, to be delivered to the Defense Logistics Agency (DLA) Distribution located in Warner Robins. The solicitation is a request for quotation (RFQ) issued by the DLA Land and Maritime office in Columbus, Ohio, and specifies that quotations must be submitted electronically by June 26, 2026. The contract includes approved sources that suppliers must comply with, specifically vendor codes 05584 A12184, 21856 1799, 54709 68A870086-1013, and 76301 68A870086-1013, ensuring adherence to specified procurement standards. The solicitation does not provide hard copies or detailed specifications, plans, or drawings, and all responsible and capable vendors are invited to submit timely quotes for consideration. The procurement falls under NAICS code 334515, indicating the manufacturing of instruments and related products for measuring and testing. The contracting activity, DLA Land and Maritime, requires all inquiries regarding this solicitation to be directed via email, with detailed information available through the provided online workspace link. The procurement aims to secure this specialized equipment within a 129-day delivery period after award.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days
View Details