Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Cybersecurity Compliance Support (NIST SP 800-171)

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves providing cybersecurity compliance support to a prime contractor to ensure adherence to DFARS 252.204-7012 requirements, focusing on the safeguarding of covered defense information and readiness for system assessments and audits. The work will align with the National Institute of Standards and Technology Special Publication 800-171 to establish and maintain appropriate security controls across information systems handling sensitive defense data. Efforts will center on achieving and sustaining audit readiness, implementing necessary safeguards, and supporting documentation and procedural controls required under federal cybersecurity standards. This subcontract is linked to the NAICS code 541512, indicating it falls under computer systems design and related services. The performance location is specified as Senatobia, Mississippi, with a zip code of 38668-0318, and the contracting activity is under the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The solicitation was posted on July 28, 2026, and responses are due by July 31, 2026, creating a short window for submission. The contract is not designated for any specific set-aside category and is accessible through the DIBBS system under solicitation number SPE4A526T265F.

General Info

Cybersecurity compliance support for DFARS 252.204-7012 and NIST SP 800-171 in Senatobia, Mississippi.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541512 - Computer Systems Design ServicesView NAICS

Place of Performance

SENATOBIA, MS, 38668-0318, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Support prime contractor in meeting DFARS 252.204-7012 requirements, including safeguarding covered defense information (CDI), system assessments, and audit readiness.

Similar Contracts

Same NAICS industry code

Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Revision 2 controls to safeguard Controlled Unclassified Information within the contractor’s systems and environments. This includes establishing technical, administrative, and physical safeguards to ensure the confidentiality, integrity, and availability of CUI in alignment with federal cybersecurity standards. The contractor must also comply with incident reporting requirements mandated by DFARS 252.204-7012, ensuring timely notification and remediation of any cybersecurity events affecting CUI. All activities must be performed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and the work is classified under NAICS code 541512 for Computer Systems Design Services. The contract is structured as a subcontract and is associated with the Department of Defense’s Land Supply Chain organization. Responses must be submitted by the deadline of August 28, 2026, with the expectation that performance will occur within the defense supply chain environment.

LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Cybersecurity Compliance & NIST SP 800-171 Assessment SupportThe contract seeks to secure advisory and implementation support to achieve NIST SP 800-171 compliance for a Department of Defense entity, specifically the ASC Commodities Division. The scope includes developing a System Security Plan, managing the Plan of Action and Milestones, and preparing the organization for a CMMC Level 2 third-party assessment. The work requires deep expertise in cybersecurity frameworks and hands-on experience guiding contractors through the entire compliance lifecycle from documentation to readiness evaluation. All tasks must be performed under the strict guidelines of NIST standards and aligned with the requirements of the Cybersecurity Maturity Model Certification program. This is a total small business set-aside under the SBA program with a NAICS code of 541512, indicating it is scoped for information technology consulting services. The solicitation was posted on July 29, 2026, with a response deadline of August 11, 2026, and is structured as a subcontract. Performance location details are unspecified, but the work is tied to the defense supply chain operations managed by the ASC Commodities Division. The contract is managed through the DLA DIBBS platform and targets qualified small businesses capable of delivering rapid, effective cybersecurity compliance support under tight timelines and stringent DoD requirements.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Virtualization Consulting IDIQThe Port of Seattle is seeking a qualified technical services partner to conduct a comprehensive evaluation of its virtualization platform, focusing on performance, security, architecture integrity, and operational reliability. The consultation will analyze the current environment to identify risks, inefficiencies, and opportunities for optimization, delivering a prioritized roadmap that aligns with the organization’s business goals, compliance requirements, security standards, and resiliency needs. The engagement is designed to ensure the platform supports current operations while enabling future scalability and robustness. This procurement is issued under the Virtualization Consulting IDIQ framework, classified under NAICS code 541512 for computer systems design services. The contract is forecasted for release with primary point of contact Carol Hassard and project manager Jim Dawson, both reachable through the Port of Seattle’s ICT Enterprise Infrastructure Services division. The work will be performed remotely or on-site as required, with the exact location not specified, and interested vendors are directed to the official solicitation portal for further details and potential future opportunities under this IDIQ.

ICT Enterprise Infrastructure Services

POSTED

about 12 hours ago

DEADLINE

Azure Consulting IDIQThe Port of Seattle is pursuing a cloud services partnership to advance its use of Microsoft Azure and hybrid cloud environments through an indefinite-delivery, indefinite-quantity (IDIQ) arrangement. The primary objective is to validate and enhance the existing Azure infrastructure, ensuring it meets current operational demands while supporting future growth and innovation. This engagement will involve guiding the design and deployment of new services, strengthening security controls, improving system resiliency, and aligning all cloud solutions with organizational standards and best practices. The contractor will serve as a strategic advisor throughout the modernization journey, helping to optimize cloud architecture for performance, cost-efficiency, and scalability. Work will be performed remotely or on-site at the Port of Seattle’s location, with primary coordination handled by Carol Hassard and Project Manager Jim Dawson. The procurement is classified under NAICS code 541512 for computer systems design services, reflecting the focus on technical consultation and integration support rather than off-the-shelf software sales. While the solicitation number is not yet available, the forecast was posted in July 2026, indicating an upcoming competitive process for qualified vendors with proven expertise in Azure cloud transformation.

ICT Enterprise Infrastructure Services

POSTED

about 12 hours ago

DEADLINE

FIDS Software ReplacementThe Port of Seattle is forecasted to procure new software for the Flight Information Display System (FIDS) under the NAICS code 541512, targeting software development and related services. The contract aims to replace existing FIDS software to enhance the accuracy, reliability, and user experience of flight information displays throughout the airport facilities. While the solicitation number is not yet assigned and the posting date is listed as July 29, 2026, the opportunity is positioned as a forecasted procurement, indicating planning and preparation for a future competitive bid process. The place of performance and specific delivery locations are not yet defined, but the system will support operations at the Port of Seattle’s aviation facilities. Primary point of contact for this initiative is Farlis Lewis, who can be reached via email or phone, with Krista Sadler serving as the Project Manager for technical coordination and oversight. The contracting entity is ICT Enterprise Infrastructure Services, working under the Port of Seattle’s infrastructure and technology modernization objectives. There is no specified set-aside designation, suggesting the opportunity is open to all qualified vendors without gender, minority, or small business preferences. Stakeholders are encouraged to monitor the official portal listed in the document for formal solicitation release, which will include detailed requirements, submission guidelines, and evaluation criteria.

ICT Enterprise Infrastructure Services

POSTED

about 12 hours ago

DEADLINE

EMS Billing Software & ePCR System Integration Support

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Technology Integration & Interoperability SupportThe contract titled Technology Integration & Interoperability Support requires the successful bidder to ensure seamless integration of cloud systems with Utah’s existing state IT infrastructure through standardized APIs, robust identity management protocols, and secure data exchange mechanisms. The focus is on maintaining compatibility and functionality across current and future systems, enabling sustained upgrades and enhancements without disrupting core operations or requiring scope expansion beyond the original objectives. All work must align with Utah’s architectural standards and support long-term scalability within the specified technical boundaries. This subcontract is open for response until August 11, 2026, and is classified under NAICS code 541512 for computer systems design services. It is issued by the Utah state agency, with no specific place of performance or point of contact listed, indicating the work may be performed remotely or across state IT facilities. The solicitation is posted on BonfireHub and is intended for subcontractors seeking to support Utah’s broader technology modernization goals by delivering interoperable, secure, and future-ready cloud solutions that adhere strictly to existing state IT frameworks.

POSTED

about 22 hours ago

DEADLINE

Continuous Monitoring System IntegrationThe contract requires seamless integration with DTS Continuous Monitoring systems within two weeks of award, focusing on the configuration of dashboards, APIs, and reporting tools to enable real-time security monitoring. This effort is critical for maintaining ongoing operational visibility and threat detection capabilities, and success hinges on timely and accurate deployment of the required technical components. The work is classified as a subcontract under NAICS code 541512, indicating it falls under custom computer programming services, and the solicitation remains open until August 25, 2026, with no set-aside provisions specified. The contracting entity is the state of Utah, and performance location details are not provided, though all work must align with the DTS system requirements as defined by the agency.

POSTED

about 22 hours ago

DEADLINE

Cloud Infrastructure Migration & Integration ServicesThe contract seeks a vendor to design and execute the migration of state systems and data into cloud environments managed by Utah’s Division of Technology Services, specifically targeting AWS, Google Cloud Platform, and Microsoft Azure. The scope includes comprehensive integration with identity management solutions and strict adherence to Utah DTS 5000-0002 security policy to ensure compliance with state-mandated standards. The work involves end-to-end planning, data transfer, system validation, and operational handoff to maintain continuity and security throughout the transition. This subcontract opportunity is open to qualified providers with demonstrated expertise in multi-cloud migrations and public sector compliance. The solicitation was posted on July 28, 2026, with proposals due by August 13, 2026, and is classified under NAICS code 541512 for computer systems design services. While the physical place of performance is not specified, the work is directly tied to Utah state systems and must align fully with the agency’s security and operational frameworks. All submissions must address the technical requirements for secure cloud integration and be prepared to demonstrate prior experience with similar statewide migrations.

POSTED

about 24 hours ago

DEADLINE

Cybersecurity Compliance and Data Safeguarding for Government SubmissionsThe contract requires the implementation and maintenance of NIST SP 800-171 security controls to protect covered defense information handled under government submissions, ensuring compliance with the Defense Federal Acquisition Regulation Supplement clauses DFARS 252.204-7012 and 252.240-7997. This includes establishing a robust cybersecurity framework to safeguard sensitive data, executing timely cyber incident reporting procedures, and maintaining ongoing adherence to federal cybersecurity standards throughout the contract period. The work is to be performed at the designated location in Dothan, Alabama, with all security and reporting obligations binding on the contractor as a subcontractor under the Defense Logistics Agency. The solicitation, issued under NAICS code 541512 for other computer-related services, is open for responses until August 10, 2026, with all submissions required to demonstrate capability to meet stringent defense information protection requirements. The contractor must possess the technical and procedural infrastructure to support continuous compliance, including documentation, audits, and incident response workflows aligned with federal mandates. Participation is limited to entities capable of operating within the Department of Defense’s cybersecurity ecosystem and ensuring end-to-end protection of controlled unclassified information as defined by applicable regulations.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Hazardous Materials Compliance & LabelingThe contract requires full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 for all hazardous materials used in manufacturing or packaging operations, ensuring that chemical hazards are properly identified and communicated through durable, legible labels. Labeling must adhere to MIL-STD-129 specifications for military-grade durability and uniformity, with special attention to environmental resilience and long-term visibility. The contractor is also responsible for comprehensive Safety Data Sheet management, including accurate documentation, timely updates, and accessibility for all relevant personnel. This subcontract is tied to operations at a specified performance location in Senatobia, Mississippi, with a tightly constrained response window ending on July 31, 2026. The work falls under NAICS code 561910 and is contracted through the Department of Defense’s ASC Supplier Operations OEM Division, indicating critical involvement in defense-related supply chain activities where regulatory precision and operational reliability are non-negotiable.

Packaging and Labeling Services

POSTED

DEADLINE

Quality Assurance & Inspection ServicesThe contract requires independent inspection and sampling of chain assemblies in strict accordance with MIL-STD-1916 or ASQ H1331 standards, with zero tolerance for any non-conformances across all inspected attributes. Critical attributes classified as Level VII, major attributes at Level IV, and minor attributes at Level II must all be verified to ensure complete compliance. The work is being performed under a subcontract for the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense, with performance specifically located in Senatobia, Mississippi, at zip code 38668-0318. The NAICS code 541380 indicates this falls under professional, scientific, and technical services, specifically in the area of quality assurance and inspection. The opportunity was posted on July 28, 2026, with a response deadline of July 31, 2026, indicating a very short turnaround for proposals or bids.

Testing Laboratories and Services

POSTED

DEADLINE

Chain Assembly ManufacturingThe contract entails the manufacture of twenty-foot single-leg chain assemblies using 3/8-inch Grade C, Class 4 chain, paired with a slip hook conforming to Type V, Class 1 specifications and a grab hook meeting Type V, Class 2 standards. The work includes full sourcing of materials, precise heat treatment processes, and final assembly to meet required performance and safety criteria. All components must adhere strictly to industry-grade classifications and mechanical specifications to ensure reliability under heavy-duty operational use. The solicitation is classified as a subcontract under NAICS code 332420, issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a response deadline of July 31, 2026. The work must be performed at a designated place of performance in Senatobia, Mississippi, with a zip code of 38668-0318. The contract was posted on July 28, 2026, and interested parties must submit proposals by the specified deadline to be considered for award.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

FUEL TANK VENTILATIThe contract is for the procurement of seven fuel tank ventilation kits identified by the NSN 4920-01-583-5563, categorized as a commercial off the shelf item with no shelf life requirement and determined not hazardous under the HMIC code review, eliminating the need for a Safety Data Sheet package. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies as per specified protocols. The item is covered under defense information security protocols, and the procurement is managed under a Total Small Business Set-Aside, with NAICS code 332721 assigned to the contract. The solicitation, issued by the Department of Defense’s ASC Supplier Oper OEM Division, was posted on July 28, 2026, with responses due by August 5, 2026, and delivery is required within 342 days after order. The point of contact for inquiries is Hien-Van Trinh, reachable via email and phone. The place of performance is listed as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002.

Precision Turned Product Manufacturing

POSTED

DEADLINE

PANEL, STRUCTURAL, AIThe contract pertains to the procurement of a structural panel designated as PANEL, STRUCTURAL, AI, with NSN 1560-01-026-3876 and part number 50-7990-29S, under solicitation SPE4A5-26-T-312C. Three units are required to be delivered within five days of order placement, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. The product is classified as a critical application item and must adhere to stringent quality provisions including ISO 9001:2015, CMMC Level 2 self-assessment, and MIL-STD-1916 sampling methodology with zero non-conformances unless otherwise specified. Packaging must follow MIL-STD-129 and RP001 DLA packaging guidelines, with non-hazardous items conforming to commercial packaging standards unless overridden by higher-priority DLA requirements. Item Unique Identification is not required per customer request. Shipping must be conducted via traceable freight methods, not parcel post, to the designated delivery address at Tinker AFB, Oklahoma. The contract mandates strict documentation for source approval, cybersecurity compliance, and material marking, including removal of government identifiers from non-accepted supplies. The unit of issue is each (EA), with a total price of $3.00 per unit. All technical and quality requirements referenced via R or I numbers are incorporated by full text from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition scale. The delivery window is set for July 22, 2026, and the point of contact is Jackayla Pendergast at the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

THERMOSTAT, FLOW CONThis contract is for the procurement of a thermostat, flow control, part number 9844X110, manufactured by AMOT Controls Corp with CAGE code 94607, under the NSN 6685-01-288-9802. A total of four units are required at a unit price of $4.00, resulting in a total contract value of $16.00. The item is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with the hardware, except for specified functional uses such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary, per NAVSEA 5100-003D. Packaging and shipping must fully comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and all packaging must adhere to DLA’s proprietary packaging requirements. Hazardous materials packaging regulations prohibit mercury in preservation, packaging, packing, or marking. The delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The delivery timeline is 78 days from the contract award, with the original required delivery date set for July 28, 2026. The contract is a total small business set-aside under NAICS code 334519, administered by the Department of Defense, with deliveries directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

PLATE, STRUCTURAL, AIThe contract calls for the delivery of five structural plates designated as AI, identified by NSN 1560-01-716-9242, under solicitation SPE4A5-26-T-311K, with a required delivery date 197 days after award and a need ship date of May 12, 2026. The items must be supplied FOB origin with zero tolerance for quantity variance and are subject to inspection and acceptance at the destination. Packaging must comply with DLA’s specific procurement requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the material is classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging and palletization must adhere to RP001, and the Unit of Issue is EA. Supplier compliance with technical and quality standards referenced in the DLA Master List is mandatory, including CMMC Level 2 self-assessment, ISO 9001:2015, and requirements related to measuring equipment and removal of government identification from non-accepted items. Item Unique Identification is not required per the service customer’s request. Sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916. Delivery is to DLA Distribution at the New Cumberland Facility in Pennsylvania, with transport instructions governed by DLAD procedural notes. The contract is under the NAICS code 336413, managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Johquin Wiley as the primary point of contact.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

COVER, SHIPPING AND STOThe contract specifies the procurement of 139 units of a shipping and storage container with NSN 8140-01-593-3819 under solicitation SPE4A5-26-Q-0654, with a delivery requirement of 323 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Documentation for source approval, packaging standards per DLA guidelines, export control compliance, and inspection procedures at origin are mandatory. Configuration changes require formal engineering change proposals for any deviation or waiver. The item is not subject to Item Unique Identification per service customer request, but all non-accepted supplies must have government identification removed. Technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons, including foreign nationals within the U.S., and requires prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contract is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Donetta Nelson as the primary point of contact, and responses must be submitted by August 9, 2026.

POSTED

DEADLINE

GAGE, PRESSURE, DIALThe contract is for a single pressure dial gage identified by NSN 6685-01-449-0699, with a delivery requirement of five days after order placement. The solicitation number is SPE4A5-26-T-312N, issued on July 28, 2026, with responses due by August 5, 2026. This item is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable control identifiers RA001, RP001, RQ011, and RQ032. Technical data associated with the gage is controlled under ITAR or EAR regulations, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Access to this export-controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD training on handling controlled technical data, have filled out the DLA questionnaire, and have received explicit approval from the DLA controlling authority. The procurement falls under NAICS code 334512 and is managed by the Department of Defense through the ASC Supplier Operations OEM Division, with Cheryl Broadie designated as the point of contact for inquiries.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

DEADLINE

INSERTER AND REMOVEThe contract specifies the supply of five units of an insert and remove item with NSN 5120-01-472-6224 and part number A10002-7, sourced from either The Boeing Company or Aeroforge Inc, under solicitation SPE4A5-26-T-311Y. Delivery is required FOB origin within 164 days of contract award, with strict zero variance in quantity and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. All items must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, including palletization and labeling. Unit of issue is each (EA), and the contract mandates adherence to MIL-STD-1916 or equivalent zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Cybersecurity compliance requires CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies per RQ011. Physical identification of bare items follows RQ017, and item unique identification is waived per DFARS 252.211-7003(c)(1)(i). Measuring and test equipment must meet RT001 standards, and all documentation for source approval submissions follows RC001. The delivery address, transportation protocols, and parcel post instructions are detailed, with a required ship date of January 17, 2027, and an original required delivery date of January 12, 2028.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

WIRE ROPE ASSEMBLY,The contract specifies the procurement of a wire rope assembly with part number 582-7006 and NSN 4010-01-618-1374, for a quantity of eight units, under solicitation SPE4A5-26-T-311V. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances required under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and shipment must be transported by the fastest traceable means, excluding parcel post, to the specified vessel shipment address at Port Hueneme, California. The item is designated for U.S. Marine Corps Underwater Construction Team 2, with a required delivery date of July 17, 2026, and the contract is governed by federal procurement rules under NAICS code 332618, issued by the Department of Defense’s ASC Supplier OEM Division.

Other Fabricated Wire Product Manufacturing

POSTED

DEADLINE

CLAMP, WIRE ROPE, BOLTEDOfferors must comply with strict requirements regarding telecommunications equipment, domestic sourcing, and additive manufacturing under this solicitation. The offeror certifies that it will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must adhere to the Berry Amendment and Buy American Act restrictions, with the Berry Amendment threshold now set at $150,000. Any use of non-domestic materials requires full disclosure to the point of contact specified in the solicitation. Small business joint ventures must submit required representations for eligibility under designated small business categories. Fast Pay is not available for this procurement, and offerors are strongly encouraged to provide quantity ranges due to the fluctuating nature of purchase requests, enabling buyers to consolidate or adjust orders without resolicitation. Offers must be submitted through DIBBS, and those unable to submit by the closing date must file a “No Bid” with an anticipated quote date to avoid assumptions of non-responsiveness. Contractors must register via the new AMPS system within two months to gain access to the Vendor Shipment Module for shipping to DLA, and VSM WebServices users must update their internal schemas to maintain functionality. Offers containing items produced using additive manufacturing are ineligible for award unless prior approval is obtained from the contracting officer. The item under solicitation is a CLAMP, WIRE ROPE, BOLTED, NSN 4030-01-273-4636, with a single unit required and delivery expected 125 days after award, sourced from San Diego, California.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE