Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Cylinder

Active
W911S226U3373Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of a heavy-duty industrial hydraulic cylinder with a 14-inch bore and a 36-inch stroke, equipped with a 7-inch diameter chrome-plated rod that is induction hardened for durability and corrosion resistance. The cylinder must feature a front flange mounting configuration compatible with standard 14-inch bore industrial dimensions and be capable of continuous operation at a working pressure of 3,000 PSI, designed with industry-standard safety factors. It will be constructed for harsh environments, suitable for indoor or outdoor use with exposure to dust and moisture, and compatible with phosphate ester hydraulic fluids through all seals and elastomeric components. The cylinder will have a non-cushioned design at both ends, and ports sized appropriately for high-pressure hydraulic operation, with connection types defined during design review. Performance-wise, the cylinder must operate at full stroke and full pressure without deformation or leakage, and both rod and cap ends must be rated for the full operating pressure. The rod end connection type will be finalized during design review, allowing for threaded, clevis, or spherical bearing attachments. Each unit is to be pressure tested to at least 1.5 times the rated working pressure before shipment, and must meet stringent leakage criteria. Maintenance considerations include seal replacement and rod serviceability with standard shop tools, with the vendor providing seal kits and maintenance guidelines. Documentation will include detailed dimensional drawings and certification of pressure rating and fluid compatibility. This contract is a total small business set-aside, solicited by the Department of Defense at Fort Drum, NY, with responses due by June 11, 2026.

General Info

Supply heavy-duty 14" bore hydraulic cylinder, 3000 PSI, corrosion-resistant, pressure tested, DoD set-aside.

Agency

Department Of Defense → W6QM Micc-Ft Drum

NAICS

333995 - Fluid Power Cylinder and Actuator Manufacturing View NAICS

Place of Performance

Crane Army Ammunition Activity300 HW 361 Building 148Crane, IN 47522NO FIRDAY DELIVERYS, NY, 47522

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
Contacts1 person available
OfficeFORT DRUM, NY, 13602-5220, USA
Organization / Agency
Department Of Defense → W6QM Micc-Ft Drum
Office AddressFORT DRUM, NY, 13602-5220, USA
Contacts
Kyle Brown
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Updated for rewording of description to add the cylinder mount details. Also added the attachment showing the mount details. Cylinder size Cylinder shall have a 14.00 inch bore and 36.00 inch stroke.Rod size Cylinder rod shall be 7 inch diameter, chrome plated over the full exposed length.Mounting configuration Cylinder shall be provided with a front flange mounting arrangement suitable for rigid attachment to the machine structure, with flange dimensions and bolt pattern per manufacturers standard for a 14 inch bore industrial cylinder.Mounting shall comply with dimensional requirements shown on DWG C-3617.Cylinder shall include the required attachment features for the specified front flange mount.Operating pressure rating Cylinder shall be designed and rated for continuous operation at 3000 PSI working pressure, with an appropriate safety factor per industry standards such as NFPA or ISO.Hydraulic fluid compatibility All seals, wipers, and internal elastomeric components shall be fully compatible with phosphate ester hydraulic fluids and suitable for continuous service in that medium.Cushioning Cylinder shall be non cushioned at both ends of stroke. No internal adjustable cushions are required.Construction type Cylinder shall be of heavy duty welded or tie rod industrial construction, designed for continuous duty in harsh environments including industrial, defense, or heavy equipment applications.Rod finish and protection Rod shall be induction hardened or equivalent as required by vendor to support the 7 inch diameter design. Chrome plating shall provide corrosion and wear resistance suitable for outdoor or industrial use.Ports and connections Cylinder shall be provided with standard hydraulic ports sized appropriately for 3000 PSI operation and the expected flow rate. Port type such as SAE, NPTF, or metric shall be specified by the vendor and compatible with the existing hydraulic system.End configurations Cap end Front flange mounting as specified.Rod end Rod end shall be provided with a threaded, clevis, or spherical bearing connection as required by the application. Final configuration to be determined during design review.Sealing system Primary rod seal, secondary seal, and wiper shall be designed for high pressure, high cycle service at 3000 PSI. All seals shall be phosphate ester compatible and rated for the full operating temperature range of the system.Operating environment Cylinder shall be suitable for indoor or outdoor industrial use, including exposure to dust, moisture, and typical shop contaminants.Performance requirements Cylinder shall be capable of full stroke operation at 3000 PSI without permanent deformation or leakage. Rod side and cap side shall both be rated for full pressure.Testing and quality Each cylinder shall be pressure tested to at least 1.5 times rated working pressure or per vendor standard prior to shipment. Cylinder shall be free of external leakage and shall meet vendors internal leakage criteria.Maintenance and serviceability Cylinder design shall allow seal replacement, gland removal, and rod service using standard shop tools. All routine rebuild and seal replacement operations shall be possible without removing the cylinder from the machine. The design shall provide sufficient access for in place servicing while the cylinder remains installed in its mounting configuration.DocumentationVendor shall provideDimensional drawing showing overall length, flange to rod end dimensions, stroke, and mounting details.Pressure rating, fluid compatibility statement for phosphate ester fluids, and test certification upon request.

Similar Contracts

NAICS: 333995
New
DIBBS
BODY, ACTUATORThe contract involves the procurement of three units of a component identified as "BODY, ACTUATOR" with the National Stock Number 1660-00-968-8623. This solicitation, numbered SPE4A5-26-T-242E, was posted on June 16, 2026, with a response deadline set for June 24, 2026. The solicitation is issued by the Defense Logistics Agency, part of the Department of Defense, to fulfill a federal purchase request numbered 7017200247. No specific set-aside type or NAICS code is indicated, and details regarding the exact place of performance or contact persons are not provided. The procurement appears to be a straightforward federal acquisition without additional restrictions or special requirements. Interested parties can access further solicitation details via the provided Defense Logistics Agency’s procurement link.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
PARTS KIT, ACTUATORThe contract pertains to the procurement of a parts kit for an actuator, identified by the National Stock Number 1680-00-770-7517. The solicitation number for this contract is SPE4A5-26-T-241Q, and it was posted on June 16, 2026. The purchase request specifies a quantity of 12 kits. This contract is managed by the Defense Logistics Agency, a component of the Department of Defense, and is intended to fulfill federal requirements. The contract solicitation is open for responses until June 24, 2026. While specific details such as set-aside status, NAICS code, and office or performance location are not provided, the solicitation aims to secure the necessary parts kits under federal contractual terms. Interested parties can access further information and submit their responses via the designated DLA web portal. This contract serves to support the operational readiness and maintenance of defense systems requiring actuator parts kits.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
HOUSING, ACTUATORThe contract involves the procurement of 41 units of housing actuators with the National Stock Number 2915-00-544-1022. This solicitation, identified as SPE4A5-26-T-245Y, was issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 16, 2026, with a response deadline set for June 24, 2026. The contract is categorized as a federal solicitation, but there are no specified set-asides or NAICS codes associated with this procurement. The place of performance and specific office addresses for this contract are not detailed or disclosed. The contract is accessible for further information through an online military procurement system, which implies that the process targets vendors capable of fulfilling government supply requirements. This contract represents a standard federal acquisition process aimed at obtaining specialized component housings necessary for actuator systems within defense logistics operations.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
Canada
Construction Engineering EquipmentThe Department of National Defence is soliciting bids for a range of construction engineering equipment to be delivered to two locations: 25 CFSD in Montreal, Quebec, and 7 CFSD in Edmonton, Alberta, by October 1, 2026. The procurement includes various hydraulic-pneumatic linear actuators, cylinder assemblies, bucket scoops, bushings, dipper backhoes, seal replacement kits, retaining rings, and manifold valve assemblies, totaling quantities from 2 to 10 units per item. These items are specified by government stock numbers, part numbers, and National Supply Classification codes, with deliveries split between the two distribution centers. Suppliers proposing equivalent or substitute products must identify their offered brand, model, part number, and supplier code. Bids must be submitted electronically via email by June 16, 2026, and can be provided in either of Canada's official languages. The Crown reserves the right to negotiate with bidders and offers debriefings upon request within fifteen business days following the bid results. The contracting authority overseeing this solicitation is Karen Benedikt, with contact details provided for bid submissions and inquiries. This procurement falls under federal government jurisdiction, intending to equip Canadian Forces Service Depots with necessary mechanical and hydraulic components to support engineering and construction operations.
Department of National Defence

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333995
New
DIBBS
ACTUATOR, MECHANICALThe contract pertains to the procurement of eight mechanical actuators, identified by the National Stock Number 1680-01-551-1098. It is issued by the Defense Logistics Agency under the Department of Defense, reflecting a federal government purchase. The solicitation for this contract was posted on June 15, 2026, with a response deadline of June 23, 2026. The contract solicitation number is SPE4A7-26-T-501U, and it represents a competitive request for proposals without any specified set-aside designation or industry size classification. Details about the exact location of performance and agency office address are not provided, indicating a possibly centralized or unspecified delivery or administrative point. The procurement focuses on acquiring these actuators for defense-related applications, demonstrating the Department of Defense's ongoing efforts to maintain or upgrade mechanical components within its supply chain. The solicitation is publicly accessible through the Defense Logistics Agency’s DIBBS system, allowing interested vendors to submit proposals within the defined period.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days
View Details