Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CYLINDER ASSEMBLY, A

Active
SPE7L1-27-T-1742Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L1-27-T-1742 is issued by the DLA Weapons Support Land Supply Chain for the procurement of one linear actuating cylinder assembly, identified as NSN 3040996132733 and Pearson Engineering Limited part number PE23961. This item is classified as a commercial product under NAICS code 333995. The required delivery date is June 17, 2027, with a need ship date of February 16, 2027, and a delivery lead time of 109 days. Shipping is FOB Origin, with the final destination being DLA Distribution Anniston in Alabama. The contract mandates strict adherence to DLA packaging requirements (RP001), MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging, though the DLA Master List of Technical and Quality Requirements takes precedence. Inspection and acceptance will occur at the origin. Compliance requirements include a CMMC Level 2 self-assessment, safeguarding of covered defense information, and adherence to the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

General Info

DLA solicitation for one linear actuating cylinder assembly delivered by June 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

333995 - Fluid Power Cylinder and Actuator Manufacturing

Place of Performance

7 FRANKFORD AVE BLDG 362, ANNISTON, AL, 36201-4199, USA

Set-Aside

NONE

Documents

1

RFQ SPE7L1-27-T-1742

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Office AddressUSA
Contacts
CHANTEL JOSEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER ASSEMBLY,A
CYLINDER ASSEMBLY,ACTUATING,LINEAR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
PEARSON ENGINEERING LIMITED K0824 P/N PE23961
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017983989 0001 EA 1.000
NSN/MATERIAL:3040996132733
DELIVERY (IN DAYS):0109
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
SPE7L1-27-T-1742
SECTION B
PR: 7017983989 PRLI: 0001 CONT’D
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3120
DLA DISTRIBUTION ANNISTON
TRANS OFFICER 256-676-2894
7 FRANKFORD AVE BLDG 362
ANNISTON AL 36201-4199
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3120
DLA DISTRIBUTION ANNISTON
TRANS OFFICER 256-676-2894
7 FRANKFORD AVE BLDG 362
ANNISTON AL 36201-4199
US
Need Ship Date:02/16/2027 Original Required Delivery Date:06/17/2027
SPE7L1-27-T-1742 NSN/Part Number: 3040-99-613-2733 Quantity: 1 EA Purchase Request: 7017983989QTY: 1 Delivery: 109 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333995
New
DIBBS
Manufacturing of Hydraulic Trip Jacks
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333995
New
DIBBS
Axial Fan Impeller SupplierThis subcontract involves the manufacture or sourcing of 20 axial fan impellers under NSN 4140-01-578-3878 for prime contractors supporting Department of Defense supply contracts. The components must be produced using precision machining or casting to meet strict aerospace and industrial tolerances. Final delivery of the completed units is required at DLA Dist San Joaquin. The supplier must ensure full compliance with specific military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the contract mandates adherence to the Buy American and Balance of Payments Program. The opportunity is categorized under NAICS code 333995.
DLA DIST SAN JOAQUIN

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333995
New
DIBBS
Final Assembly and Testing of Purge Adapter Valve AssembliesThis subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the final integration and testing of two Purge Adapter Valve Assemblies for DLA aircraft power unit projects. The scope of work includes assembling valve components, conducting rigorous pressure and leak testing, and performing final inspections. All items must be packaged according to ASTM D3951 and RP001 standards and marked in compliance with MIL-STD-129. The project is designated as a Total Small Business Set-Aside under NAICS code 333995. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification, achieve CMMC Level 2, and ensure full ITAR and EAR compliance. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 26, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
International
WS593(216)7909 - Solped 10(00)044(676) 10(00)044(677) 10(00)044(678) - Adquisición e Instalación de actuadores eléctricos para sistema de bombeo en estaciones de Triple A
Solicitation # 1000044676, 1000044677, 1000044678
Triple A S.A. E.S.P. has issued an abbreviated invitation to bid for the acquisition and installation of electric actuators for pumping systems at three specific locations: Estación Alta 3 ETAP Acueducto, Estaciones Ciudadela, and Estaciones Delicias. The scope requires equipment to be supplied completely assembled, configured, and ready for operation. Technical specifications mandate the use of the Modbus RTU communication protocol, local ON/OFF operation, non-volatile memory for configuration and position data, and double sealing via O-rings. Accepted brands include Flowserve (Limitorque), Bernard, Rotork, and Auma. Butterfly valves must be Wafer type with a maximum pressure of 175 psi, featuring a cast iron ASTM A126 body, stainless steel 316 disc, stainless steel 416 stem, and EPDM seat. The delivery schedule is four weeks from the purchase order for the Alta 3 ETAP station and eight weeks for the Ciudadela and Delicias stations. Awarding will be based on economic, legal, and technical evaluations, with a primary focus on the economic qualification criterion; ties will be broken by the earliest submission time. The successful contractor must provide a quality insurance policy covering 20 percent of the contract value for one year and constitute all required guarantees within five business days of signing. Bidders must submit their proposals via the SAP Ariba Sourcing platform using the mandatory price and quantity annex. Compliance with anti-corruption policies, data protection laws, and specific vehicle access requirements for facility entry is mandatory.
Triple A S.A. E.S.P.

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 333995
New
DIBBS
Supply of Fluid Filter Elements (NSN 4330-01-591-8306)This subcontract involves the procurement or manufacture of four fluid filter elements, specifically matching Marine Travelift Inc part number 1008667, to support DLA Weapons Support Maritime Supply Chain contracts. The selected provider must ensure all items are packaged according to ASTM D3951 and MIL-STD-129 standards and palletized per RP001. Delivery is required FOB Destination to Sasebo City, Japan. The contract falls under NAICS code 333995 and requires strict compliance with the Buy American and Balance of Payments Program. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026. This effort is managed by the Department of Defense for the DLA Weapons Support Maritime Supply Chain.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
Axial Fan Impeller Manufacturing and SupplyThis subcontract involves the manufacture and supply of 23 axial fan impellers, identified by NSN 4140-00-103-6943, to support prime contractors fulfilling Department of Defense supply contracts. The contractor is responsible for producing or sourcing the units in strict accordance with provided technical data packages, with a specific prohibition against the use of additive manufacturing. All deliverables must be marked according to MIL-STD-129 and packaged per ASTM D3951 standards. The performance of this contract is centered in Jacksonville, Florida, under NAICS code 333995, with the final requirement being the delivery of 23 completed, marked, and packaged impellers.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
Linear Actuating Cylinder Assembly ManufacturerThis subcontract involves the manufacture and supply of one Linear Actuating Cylinder Assembly, part number 3040-01-263-9534, for prime contractors supporting DLA Weapons Support projects. The assembly must be fabricated to strict military specifications for naval vessel applications, ensuring compatibility with Parker Hannifin or Curtiss-Wright Flow Control Corporation standards. Production requires the use of precision machining and pressure testing rigs to meet rigorous performance requirements. The project is managed under the Department of Defense and falls under NAICS code 333995. Compliance with Critical Application Item quality controls and Buy American Act restrictions is mandatory. The successful contractor is responsible for delivering one fully tested assembly to the designated place of performance in FPO 96643.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 333995
New
DIBBS
PISTON, LINEAR ACTUATING CYLINDER
Solicitation # SPE47-27-R-X023
Solicitation SPE47-27-R-X023 is a total small business set-aside for the procurement of 1,000 units of Piston, Linear Actuating Cylinder (NSN 1650-00-769-4761) for the DLA Weapons Support ASC. This is an Indefinite Delivery Contract with firm-fixed-price terms, requiring delivery within 165 days after receipt of order, with shipping terms set as FOB Destination. The award will be based on a comparative assessment of price, past performance, and delivery, with SPRS assessments and historical quality and delivery records weighted most heavily. The contract imposes strict technical and security requirements, including compliance with various reference drawings and the Northrop Grumman License Agreement for restricted technical data. Because the item contains export-controlled technical data subject to ITAR or EAR, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires to gain access. Packaging must adhere to ASTM D3951 and RP001, with marking following MIL-STD-129. Inspection and acceptance will occur at the origin. Administrative requirements include electronic invoicing via the Wide Area Workflow system and adherence to DFARS cybersecurity standards, including CMMC Level 2 requirements.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7LX-26-U-011B
Solicitation SPE7LX-26-U-011B is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of linear actuating cylinder assemblies, identified by NSN 3040015740083. This requirement is for an estimated quantity of 92 units under an Indefinite Delivery Contract for a one-year period, with a maximum contract value of 350,000.00 dollars. The procurement specifies part numbers 0505007 from G.T. Machining & Fabricating Ltd. and MU0505007 from Hiab USA Inc. Delivery is required within 128 days after order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled per MIL-STD-129 and palletized according to RP001. Environmental restrictions prohibit the use of Class I Ozone Depleting Chemicals, and the contractor must remove government identification from any non-accepted supplies. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Award evaluation will be based on price quotes from qualified suppliers, and the buy may be eligible for automated award. Compliance with the Berry Amendment, Buy American Act, and DFARS cybersecurity reporting for covered defense information is required.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

4 days ago

DEADLINE

in about 19 hours
View Details
NAICS: 333995
New
DIBBS
PISTON, LINEAR ACTUATIN
Solicitation # SPE4A6-27-Q-0106
Solicitation SPE4A6-27-Q-0106, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for 131,000 linear actuating cylinder pistons (NSN 1650-00-769-4761). The delivery requirement is set for 116 days after the order is placed, with a material need ship date of June 1, 2027. Award will be based on best value, considering a trade-off between quoted price and non-price factors, including delivery schedule compliance and historical quality performance. Inspection and acceptance will occur at the source. The contract contains stringent export control and security requirements, as the technical data is subject to ITAR or EAR regulations. Access to this data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, a Northrop Grumman License Agreement is in place, requiring strict data non-disclosure and destruction protocols. Packaging must adhere to ASTM D3951 and RP001 standards, with marking and labeling following MIL-STD-129. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L3-27-Q-0034
Solicitation SPE7L3-27-Q-0034 is a firm fixed price request for one linear actuating cylinder assembly, part number 3040-01-263-9534, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support. The item is designated as a critical application item, with identified compatible parts from Parker Hannifin Corporation and Curtiss-Wright Flow Control Corporation. Delivery is required 158 days after receipt of order, with the destination for both inspection and acceptance being the USS Essex LHD 2. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. It specifically prohibits the intentional addition of mercury or mercury-containing compounds. Award will be based on best value, evaluating price alongside past performance and proposed delivery timelines. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding business ethics, small business utilization, and domestic material restrictions under the Buy American Act.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE4A5-27-T-1078
Solicitation SPE4A5-27-T-1078 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper OEM Division for one Cylinder Assembly, A, identified by NSN 4920-01-543-4911. This item is designated as a critical application item and must be produced according to Basic Drawing NR 81873 87501324, Revision A. The delivery is set for 165 days after award, with a need ship date of April 6, 2027, and a final required delivery date of June 4, 2028. Delivery is FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet ISO 9001:2015 or an equivalent standard, with sampling conducted per MIL-STD-1916. Packaging and marking must adhere to MIL-STD-2073-18E and MIL-STD-129. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, and contractors must have approved US/Canada Joint Certification Program certification. Additionally, the solicitation includes requirements for safeguarding covered defense information under DFARS 252.204-7012 and prohibits the use of additive manufacturing unless specifically authorized. Offerors must submit quotations by October 22, 2026. The evaluation process may include a price preference for certified HUBZone small businesses. Compliance with the Buy American Act and the Berry Amendment is required, with mandatory disclosure for any non-domestic materials used. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332613
New
DIBBS
Supply of Helical Compression Springs (NSN 5360014220687)This subcontract opportunity is for the manufacture and supply of helical compression springs to support prime contractors under the Defense Logistics Agency Weapons Support Land Supply Chain. The selected provider must produce hardware according to NSN 5360014220687 specifications using specialized spring winding and coiling machinery. All deliverables must adhere to strict government standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. The contract falls under NAICS code 332613 and requires the contractor to possess a valid CAGE code. Interested parties must submit their responses by November 2, 2026, to provide the packaged and labeled components as required by the Department of Defense.
Spring Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332312
New
DIBBS
Manufacturing and Supply of Mounting Brackets (NSN 5340016185711)This subcontract involves the precision manufacturing and supply of mounting brackets for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating brackets according to the specific dimensions and material requirements of NSN 5340016185711. All deliverables must adhere to strict military standards, including MIL-STD-129 for markings and MIL-STD-2073-1E and RP001 for packaging. Compliance requirements are rigorous, necessitating a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 standards. Additionally, the provider must comply with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is November 2, 2026, under NAICS code 332312.
Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 488410
New
DIBBS
DLA Compliant Packaging and DeliveryThis subcontract, titled DLA Compliant Packaging and Delivery, is issued by the Department of Defense under the DLA Weapons Support Land Supply Chain. The contractor is responsible for providing specialized packaging and final packing services for prime contractors fulfilling DLA supply contracts. All work must be executed in accordance with RP001 DLA Packaging Requirements for Procurement, utilizing military-grade materials to ensure protection against environmental degradation during transit. The final deliverable is a packaged and labeled cable assembly that is fully ready for shipment. The performance of this contract will take place at the Detroit Arsenal in zip code 48397-5000. The opportunity was posted on October 18, 2026, with a response deadline of October 29, 2026. It is categorized under NAICS code 488410.
Motor Vehicle Towing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Manufacturing of Cable Assembly (NSN 6150200135942)This subcontract involves the manufacture and assembly of a specialized cable assembly under NSN 6150200135942 for the DLA Weapons Support Land Supply Chain within the Department of Defense. The selected provider must fabricate one completed assembly using specialized wiring, connectors, and shielding, ensuring strict adherence to the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 335999 and will be performed at the Detroit Arsenal. To be eligible, contractors must possess a valid CAGE code and UEI registration. The response deadline for this requirement is October 29, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Supply of KEPCO Power Supply (NSN 6130011091643)
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332710
New
DIBBS
Manufacturing of Protective Dust and Moisture Seal Plugs
Machine Shops

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
Supplier for Parts Kit, Linear AC (NSN 2590996719047)This subcontract involves the procurement, manufacture, and assembly of a complete Linear AC Parts Kit under NSN 2590996719047 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected supplier is responsible for consolidating all necessary components into a single kit, ensuring strict adherence to MIL-STD-129, MIL-STD-2073-1 Appendix D, and DLA RP001 packaging standards. The final deliverable consists of one fully assembled and packaged kit delivered via First Destination Transportation to Fort Leonard Wood. Compliance with the Buy American Act and the Berry Amendment is mandatory for this requirement. The opportunity is categorized under NAICS code 333310 and was posted on October 18, 2026, with a response deadline of October 29, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Supply of Strike Catch Hardware (NSN 5340010965019)This subcontract involves the supply of strike catch hardware for prime contractors under DLA supply contracts, specifically for the Department of Defense agency DLA Weapons Support Land Supply Chain. The contractor is responsible for manufacturing or sourcing 41 units of Strike Catch hardware, identified by NSN 5340010965019 and Part Piece Number 12296217. All deliverables must strictly adhere to Technical Data Package Rev C Gen 3 and Basic Drawing NR 19207 12296217, requiring the use of tooling capable of meeting these precise drawing requirements. The project falls under NAICS code 332510 and will be performed in Barstow, California. The solicitation was posted on October 18, 2026, with a response deadline set for October 29, 2026.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332323
New
DIBBS
Supply of Metal Swinging Doors
Ornamental and Architectural Metal Work Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493110
New
DIBBS
Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors delivering DLA supply contracts for the Department of Defense, specifically the DLA Weapons Support Land Supply Chain. The scope of work involves the specialized packaging, marking, and palletization of pumps to ensure they are ready for government shipment. All work must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001 DLA Packaging Requirements for palletization, utilizing approved military-grade materials and equipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 493110, with the place of performance located at Fort Hood, Texas. Interested parties must respond by October 29, 2026.
General Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333911
New
DIBBS
Supply of Cooling System Pump (NSN 2930-01-663-4578)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or procurement of two Cooling System Pumps identified by NSN 2930-01-663-4578. The supplier must ensure that all units meet strict technical specifications and quality control standards for new condition codes to support prime contractors delivering on DLA supply contracts. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333911, with the place of performance located at Fort Hood. Interested parties must submit their responses by October 29, 2026, following the posting date of October 18, 2026.
Pump and Pumping Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325211
New
DIBBS
Supply of O-Rings (NSN 5331-01-384-7502)This subcontract involves the supply of five O-rings, identified by NSN 5331013847502, to prime contractors supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The items must be delivered to Tracy, California, and must adhere to strict packaging requirements, including the use of medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 to protect against ultraviolet deterioration. The contract mandates full compliance with RP001, MIL-STD-2073-1E, and MIL-STD-129 for all packaging and labeling standards. Classified under NAICS code 325211, the procurement process began on October 18, 2026, with a response deadline set for October 29, 2026.
Plastics Material and Resin Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS