Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CYLINDER ASSEMBLY, ACTU

Active
SPE7L1-26-T-912NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one cylinder assembly, actuating, linear, identified by NSN 3040-01-651-0388 and part number AVP-0.75X2.25-R, with a quantity of one unit. Delivery is required within ten days from the contract award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and container specifications. Marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA's Packaging Requirements for Procurement and palletization standards, with shipments directed to the Distribution Management Office at Camp Kinser, Japan. Transportation and freight details reference specific DLA procedural notes, and the item is marked for delivery to MWSS 172. The solicitation number is SPE7L1-26-T-912N, with a response deadline of August 17, 2026, and the original required delivery date is July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under R and I numbering, with the applicable revision tied to the solicitation or award date depending on acquisition size. The contracting agency is the Department of Defense under the Land Supply Chain, and the point of contact is Kristina Derry.

General Info

One linear actuating cylinder, NSN 3040-01-651-0388, to be delivered FOB origin to Japan by August 17, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-912N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER ASSEMBLY,ACTUATING,LINEAR
CYLINDER ASSEMBLY,A
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NEFF GROUP DISTRIBUTORS INC 0KVE3 P/N AVP-0.75X2.25-R
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017726943 0001 EA 1.000
NSN/MATERIAL:3040016510388
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:BL CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:A
UNIT CONT:E5 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
SPE7L1-26-T-912N
SECTION B
PR: 7017726943 PRLI: 0001 CONT’D
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
M20220
DISTRIBUTION MANAGEMENT OFFICE
BLDG 401 CAMP KINSER
MF M20220 ATTN: DIST MGMT OFFICER
CAMP KINSER 901-2100
JP
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
M00172
DISTRIBUTION MANAGEMENT OFFICE
BLDG 401 CAMP KINSER
MF M00172 MWSS 172
CAMP KINSER 901 2100
JP
MARKFOR
M00172
DISTRIBUTION MANAGEMENT OFFICE
BLDG 401 CAMP KINSER
MF M00172 MWSS 172
CAMP KINSER 901 2100
JP
M/F: (TCN) M0017262090108
RDD: 555
PROJ: TP 2
SUPP ADD: YMT SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A31 DIST: ADV: 2D FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:07/31/2026
SPE7L1-26-T-912N NSN/Part Number: 3040-01-651-0388 Quantity: 1 EA Purchase Request: 7017726943QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L1-26-T-913C
This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7L1-26-T-914N
This contract pertains to the procurement of a single rigid connecting link, identified by NSN 3040-01-691-5927 and part number 072249 from L3 Technologies, Inc., with a required delivery within five days of award, delivered FOB destination. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, incorporating specifications identified by R or I numbers. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging methods including preservative treatment, intermediate containment labeled E5, and a packing code of U, while avoiding any use of mercury or mercury-containing compounds except under limited, approved exemptions such as functionally necessary components in batteries, sensors, or weapon systems, which themselves require secondary containment and shock-proof construction per NAVSEA 5100-003D. All supplies must be marked according to government specifications with no additional special markings, and palletization must follow DLA packaging guidelines. The delivery destination is FPO AP 96349, with the final delivery location at the Commander, SRF-JRMC Yokosuka Naval Base in Japan. The contract requires exact quantity compliance with zero variance tolerance and includes specific transportation and freight shipping instructions referenced in DLAD procedural notes. The required delivery date is August 4, 2026, and all compliance, marking, and packaging directives are mandatory for acceptance at destination, where inspection and acceptance will occur.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE4A5-26-T-328D
The contract solicits the procurement of 58 units of NSN 3040014328239 CONNECTING LINK,RIG, with quantities distributed across three line items: 56 units to be delivered within 604 days, one unit within 90 days, and another single unit within 424 days, all directed to W1A8 DLA DISTRIBUTION. All responsible sources are invited to submit electronic quotes, which will be considered if received by the deadline. The solicitation is issued under contract number SPE4A5526T328D by the Department of Defense through DLA Aviation, with the North American Industry Classification System code 333613 indicating a focus on industrial machinery manufacturing. The office responsible is located in Richmond, Virginia, and all inquiries must be directed via email to the primary point of contact listed in the solicitation document, with additional details accessible through the SAM.gov portal using the provided solicitation number. The response deadline is set for August 12, 2026, and no set-aside provisions are specified, meaning the opportunity is open to all qualified offerors.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7L1-26-T-912H
The contract is for one cylinder assembly, identified by NSN 3040-01-682-5121 and part numbers 291050 and SEA1770-10203.02, supplied by YAMBA WELDING & ENGINEERING PTY and LEIDOS AUSTRALIA PTY LIMITED, respectively. It is classified as a commercial item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with marking following MIL-STD-129 and no special marking codes applied. The item must be delivered FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. The delivery address is the 2nd Assault Amphibian Battalion at Camp Lejeune, North Carolina, and shipping must be via the fastest traceable means—parcel post is prohibited. The contract is under solicitation SPE7L1-26-T-912H with a required delivery date of July 31, 2026, and the unit of issue is a single unit (EA). For government use only, the supply chain data includes a TCN, project code TP 2, and specific distribution and fulfillment codes.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7LX-26-U-9235
The solicitation seeks 60 cylinder assembly, actuator units under NSN 3040015727391, with a guaranteed minimum order of nine units and a potential total value up to 350,000.00 over a one-year contract term, which may result in an indefinite delivery contract. Deliveries are to be made to multiple DLA depots across CONUS and OCONUS via consolidated and containerized shipments, with a required delivery timeline of 598 days after award. This is a source-controlled item, with only two approved suppliers authorized to furnish the part, and all units must strictly comply with the referenced drawing specifications available electronically through the solicitation link. The solicitation is issued as a Small Business Set Aside under NAICS code 333613 by the Defense Logistics Agency Land and Maritime, with responses due by August 19, 2026, and must be submitted electronically; hard copies are not available. All responsible small business sources are encouraged to quote, and inquiries should be directed to the designated point of contact via email.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L4-26-T-5980
The contract pertains to the procurement of a single unit of a pulley with a groove, identified by NSN 3020-01-338-4624 and part number SC-108, under solicitation SPE7L4-26-T-5980. Delivery is required within 20 days from the award date, with FOB origin terms, and the item must be delivered to Fort Eustis, Virginia, identified by the shipping address W26RK4, Building 1610, Patch Rd, AWCF SSF. The quantity variance is strictly zero percent, meaning exactly one unit must be supplied. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering to MIL-STD-129 for marking and labeling. DLA’s Master List of Technical and Quality Requirements supersede any conflicting standards, and palletization must meet the specific packaging guidelines outlined in RP001. Shipments must use traceable methods only, excluding parcel post, and are tied to a government tracking number and project code TP 3. The contract specifies the unit of issue as each and the total price for one unit. The required delivery date is July 24, 2026, and the purchase request number is 7017643799. The point of contact is Anna-Rachelle Betts, and inquiries should be directed to her at the provided email and phone. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under NAICS code 333613 for the Department of Defense's Combat Vehicles and Armament division. All technical and quality requirements referenced through R or I numbers in the DLA Master List govern the product’s conformance, and the Government maintains administrative controls for tracking and disposition using the designated DIC, DIST, and ADV codes. The vendor, Columbus Jack Corporation, is expected to fulfill all specifications, packaging, and delivery obligations to avoid rejection or non-compliance.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
GEAR, WORM WHEEL
Solicitation # SPE7L4-26-T-5982
The contract is for one worm wheel gear, identified by NSN 3020-01-087-5122 and part number 27021-1280, under solicitation SPE7L4-26-T-5982, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. The item must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must follow MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking code, and the gear must be packaged in a Type 1, 2, or 3, Class B or C, Style 1 bag per MIL-B-117. Delivery is required within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, to the receiving address in Silverdale, Washington, with a required delivery date of July 28, 2026. All shipments must adhere to specified palletization and container instructions, and the point of contact for inquiries is Anna-Rachelle Betts. The contract includes government-only identifiers and project codes for tracking and administrative purposes.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-911G
The contract specifies the procurement of one straight shaft with NSN 3040-01-521-9922 and part number LG0094-533 from SAF-HOLLAND, INC. The item is to be delivered within five days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with ASTM D3951 unless superseded by higher-priority DLA Master List of Technical and Quality Requirements. Packaging and labeling must adhere to MIL-STD-129, and palletization must meet DLA’s RP001 packaging standards. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated delivery point at Building 3416, 8 Liberty Street, Devens, MA 01434-4320. The required delivery date is August 5, 2026, and the contract is issued under solicitation SPE7L1-26-T-911G with a response deadline of August 17, 2026. The item falls under NAICS code 333613 and is managed by the Department of Defense’s Land Supply Chain. All government identification must be removed from non-accepted supplies, and the contract includes specific tracking identifiers including RDD 999, project TP 1, and supplier code W90NHW.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
PROPELLER SHAFT WIT
Solicitation # SPE7L1-26-T-913J
This contract specifies the procurement of a single unit of a propeller shaft with a U-joint cataloged under NSN 2520-20-007-7387, sourced from approved manufacturers including EUGEN KLEIN GMBH, ELBE HOLDING GMBH CO. KG, and GENERAL DYNAMICS LAND SYSTEMS CANADA. The item must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications including ASTM D3951. Ozone depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the governing specifications. Packaging and shipping must adhere to DLA’s RP001 packaging requirements and MIL-STD-129 labeling standards, with hazardous material packaging following IP025 if applicable per FED-STD-313. The item must be delivered FOB origin within five days of contract award, shipped via traceable freight methods excluding parcel post, and addressed to the designated delivery point at Fort Carson, Colorado. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The contract reference number is SPE7L1-26-T-913J, with a required delivery date of August 3, 2026, and the unit of issue is each. All contractual obligations are binding under DLA procurement rules, and the point of contact for inquiries is Kristina Derry.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE4A6-26-T-11WG
The contract is for a single Connecting Link, Rig, identified by NSN 3040-01-241-7449 and part number 70219-42410-045, procured under solicitation SPE4A6-26-T-11WG for the Department of Defense through the ASC Commodities Division. Delivery is required within 171 days from the award date, with a required ship date of January 31, 2027, and a final delivery deadline of July 26, 2027, at FOB Origin. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. No quantity variance is permitted, and the unit of issue is a single unit. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization strictly following DLA Packaging Requirements for Procurement, and all technical and quality requirements from the DLA Master List take precedence. Item Unique Identification is not required per the Service customer’s request, though other marking and labeling standards including physical identification and removal of government identification from non-accepted supplies must be followed. Technical and quality compliance is governed by multiple DLA Master List requirements including RQ001 for tailored higher-level quality requirements, RQ042 mandating ISO 9001:2015 for both manufacturers and non-manufacturers, RT001 for measuring and test equipment, and RD004 requiring a Cybersecurity Maturity Model Certification Level 2 self-assessment. Acceptable sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Covered defense information requirements apply, and all documentation must align with source approval procedures. The contract references DLA’s authorized unit of issue and requires adherence to cybersecurity and packaging protocols, with point of contact Tammy Ballard listed for inquiries. The solicitation opens with a response deadline of August 12, 2026, and includes comprehensive compliance obligations beyond standard procurement practices.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
GEARSHAFT, SPUR
Solicitation # SPE7L1-26-T-913A
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
LEVER, MANUAL CONTRO
Solicitation # SPE7LX-26-U-9175
The contract covers the procurement of a manual control lever, identified by NSN 3040-01-270-6392 and part number EL060-53300 from DYNAPAR CORP, under solicitation SPE7LX-26-U-9175. The requirement is for eight units, with an estimated quantity that may not be fully purchased by the IDC. Delivery is due within 66 days FOB origin, with zero variance allowed in quantity. The item is classified as a critical application item and must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including specific packaging methods, containment codes, and palletization per DLA packaging guidelines. No mercury or mercury-containing compounds may be intentionally added to the item or come into direct contact with it, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical analysis reagents approved by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment as per NAVSEA 5100-003D. The contract is a total small business set-aside under NAICS code 333613, and inspection and acceptance occur at the destination. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessed via the provided portal.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 336390
New
DIBBS
OIL FILTER CUTTER
Solicitation # SPE7L1-26-T-914K
The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L1-26-Q-1439
The procurement is for 69 units of a metal tube assembly identified by NSN 4710016759509, to be delivered to W1A8 DLA DISTRIBUTION within 246 days after award. This is a source-controlled item governed by a specific drawing, with only the approved source 21392 P5574-2 eligible to supply the component. The solicitation, numbered SPE7L1239, is issued as a combined RFQ with a Small Business Set Aside designation, meaning only small businesses can compete. It is classified under NAICS code 326122 and managed by the DLA Land and Maritime office in Columbus, Ohio. All quotes must strictly conform to the technical requirements of the referenced drawing, and digitized versions of drawings and military specifications are available electronically for retrieval. Quotes may be submitted online only; hard copies are not accepted and must be received by the deadline of August 13, 2026. Interested parties are directed to the SAM.gov link for the full solicitation and must direct inquiries via email to the designated buyer, as no phone or in-person contact options are provided.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-910W
The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-912K
The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
RADIATOR, ENGINE COO
Solicitation # SPE7L1-26-T-915A
This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913T
The contract specifies the procurement of a gasket with NSN 5330-00-391-8381 and part number N0900367 from LESLIE CONTROLS, INC., with a quantity of two units to be delivered within 20 days of contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including use of a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special labeling required. The gasket must not contain asbestos as defined by FED-STD-313, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any permitted mercury-containing devices must have shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging and palletization must adhere to DLA standards, and hazardous material shipping details require use of traceable freight services only—parcel post is prohibited—with the delivery address designated to the Naval Computer and Telecommunications Station Cutler in Maine. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The solicitation number is SPE7L1-26-T-913T, with a response deadline of August 17, 2026, and the original required delivery date is July 30, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-913F
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RING
Solicitation # SPE7L1-26-T-910S
The contract pertains to the procurement of 1,220 units of a spacer ring identified by NSN 5365-15-120-2240 and part number 60154625, supplied by IVECO DEFENCE VEHICLES S.P.A. The item is classified as a commercial item and must comply with technical and quality requirements referenced from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization in line with DLA standards. Delivery is FOB origin with a 171-day lead time, inspection and acceptance occurring at the destination. The unit of issue is each, with a total price of $1,220.000. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required delivery date set for May 12, 2027, and a need ship date of January 31, 2027. Transportation protocols and freight details are governed by DLA procedural notes C19 and C20. The solicitation was issued under SPE7L1-26-T-910S, with the response deadline on August 12, 2026, and falls under NAICS code 332119.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-911E
The contract pertains to the procurement of one unit of a COVER, ACCESS item identified by NSN 5340-01-260-9890, with a delivery requirement of 10 days after award. The solicitation, issued under number SPE7L1-26-T-911E, is governed by DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. This is a PRI QML-restricted item, limiting award exclusively to accredited manufacturers or distributors listed on the current PRI QML, with distributors required to offer products from accredited manufacturers. Prior to award, the buyer must verify the vendor’s accreditation status and retain a dated copy of the PRI QML in the contract file. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-912R
This contract pertains to the procurement of a gasket identified by NSN 5330-01-696-6243 and part number 11B4600146-3, with a single unit requirement to be delivered within ten days of contract award. The item must comply with strict packaging standards, including sealing in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, due to the susceptibility of related materials to UV degradation. All packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be shipped to a U.S. Army facility in Powidz, Poland. The contract prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification but maintaining all product performance requirements. Configuration changes or deviations require formal approval via an Engineering Change Proposal, and a Certificate of Conformance is authorized unless specifically withheld. The technical specification referenced is TDP Rev A Gen 1, dated September 15, 2021, with a revision effective July 1, 2024. All requirements are governed by the DLA Master List of Technical and Quality Requirements, and the solicitation falls under full and open competition with no set-aside. The designated point of contact is Kristina Derry at the Defense Logistics Agency, with the solicitation issued under SPE7L1-26-T-912R, and the original required delivery date set for July 31, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details