Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CYLINDER ASSEMBLY, ACTU

Open
SPE7L1-27-T-4174Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L1-27-T-4174 is a small business set-aside procurement issued by the DLA Weapons Support Land Supply Chain for the acquisition of two linear actuating cylinder assemblies, identified by NSN 3040-99-866-5816. The contract specifies a delivery timeline of 168 days after order, with a need ship date of May 4, 2027, and an original required delivery date of January 2, 2028. Shipping is handled under the First Destination Transportation program with FOB Origin terms, delivering to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The procurement is subject to strict technical and quality requirements, with the DLA Master List taking precedence over ASTM D3951 packaging standards. All packaging must comply with MIL-STD-129 and RP001, and the use of additive manufacturing processes is strictly prohibited. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, cybersecurity safeguarding under NIST SP 800-171, and prohibitions on Class I ozone-depleting chemicals and hexavalent chromium. Payment and receiving reports must be processed electronically via the Wide Area WorkFlow system.

General Info

DLA small business procurement for two linear actuating cylinder assemblies by 2028.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first17 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Office AddressUSA
Contacts
Troy Timmerman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER ASSEMBLY,ACTUATING,LINEAR
CYLINDER ASSEMBLY,ACTUATING,LINEAR.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
KNDS DEFENCE UK LIMITED K7705 P/N G406/8023
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019028319 0001 EA 2.000
NSN/MATERIAL:3040998665816
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7L1-27-T-4174
SECTION B
PR: 7019028319 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/04/2027 Original Required Delivery Date:01/02/2028
SPE7L1-27-T-4174 NSN/Part Number: 3040-99-866-5816 Quantity: 2 EA Purchase Request: 7019028319QTY: 2 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
Socket Head Cap Screw Supply
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
Worm Shaft Manufacturing (NSN 3040016018181)This subcontract involves the manufacture and supply of one Worm Shaft Kit (NSN 3040016018181) for the USS Richard M McCool Jr LPD 29, supporting the DLA Weapons Support Land Supply Chain. The project requires precision machining through CNC milling, turning, and grinding in strict accordance with DLA Master List technical and quality requirements RA001. The contract mandates that all materials comply with the Buy American and Balance of Payments Program, and it explicitly prohibits the use of additive manufacturing. This effort is categorized under NAICS code 333613 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Supply of Straight Axles (NSN 3040131205377)This subcontract involves the supply of 17 straight axles matching NSN 3040131205377 for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The selected provider is responsible for manufacturing or sourcing the components and ensuring all items are delivered to Tracy, California, by the specified ship date. Compliance is critical for this engagement, as the contractor must maintain an active SAM registration and adhere to the DLA Master List of Technical and Quality Requirements. All deliverables must be packaged according to ASTM D3951 and marked and labeled in strict accordance with MIL-STD-129 standards.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Supply of Aerospace Coupling ShaftsThis subcontract involves the supply of six specialized aerospace coupling shafts for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing part number 119397, identified by NSN 3040001674897 and associated with Eaton Aerospace, LLC, ensuring all technical specifications are met. The agreement requires strict adherence to RP001 DLA Packaging Requirements and MIL-STD-129 marking standards for all shipment and storage activities. Final delivery of the units is designated for the DLA Distribution Depot Oklahoma located at Tinker AFB.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Linear Actuator Assembly and Testing
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Marking Services
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA supply contracts through the specialized handling of Lamp Assemblies. The scope of work requires strict adherence to MIL-STD-2073-1, Method 41 for packing and the use of compliant packaging materials. The provider is responsible for coordinating transport and ensuring all shipments are properly labeled and delivered to government destinations in accordance with Department of Defense and DLA shipping and receiving protocols. The project is managed under the DLA Weapons Support Maritime Supply Chain within the Department of Defense, with performance located in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026. The contract is categorized under NAICS code 333613, focusing on the precise logistical requirements necessary for military-grade equipment transport.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Supply of Stub Shafts (Critical Application Item)This subcontract involves the supply of three specialized stub shafts, specifically part numbers 16480N18 and PL-15692N18, to prime contractors supporting DLA supply contracts. These components are designated as Critical Application Items and must be packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement. The contract is managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Wheeled Vehicles agency. Performance for this requirement is located in New Cumberland, Pennsylvania, with the procurement falling under NAICS code 333613.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Manufacturing and Supply of Linear Actuating Cylinder Assemblies
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Supply of Fluid Transmission Coolers (NSN 3040-01-478-6945)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the supply of 30 fluid transmission coolers with NSN 3040-01-478-6945. The units must measure 8 by 14 by 1.5 inches with 3/4 NPT inlets and outlets, ensuring compatibility with Hayden Inc or Pacific Consolidated Industries LLC specifications. All items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract is designated as a Total Small Business Set-Aside under NAICS code 333613 and mandates strict compliance with the Buy American Act. Packaging and palletization must adhere to ASTM D3951, MIL-STD-129, and RP001 standards. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Vehicular Propeller Shaft Manufacturing and Supply
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L1-27-T-4229
Solicitation SPE7L1-27-T-4229 is a Request for Quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 116 units of a shouldered shaft, also identified as an extension rod, under NSN 3040-01-030-1684. This small business set-aside acquisition requires delivery within 168 days after order to DLA Distribution San Joaquin in Tracy, California, with FOB Origin terms under the First Destination Transportation program. Inspection and acceptance will occur at the origin. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, with specific packaging and marking standards governed by MIL-STD-2073-1E, MIL-STD-129, and RP001. Key restrictions include a prohibition on Class I ozone-depleting chemicals and a requirement for the removal of government identification from non-accepted supplies per MIL-STD-130N(1). Furthermore, the contract involves export-controlled technical data subject to ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. Cybersecurity compliance is required via CMMC Level 2 and DFARS 252.204-7012, and all payment requests must be processed through the Wide Area Workflow system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332999
New
DIBBS
Grommet Assembly Fabrication and SupplyThis subcontract involves the manufacture and supply of five completed Grommet Assembly units for prime contractors supporting the DLA Weapons Support Land Supply Chain. The fabrication process must strictly adhere to Basic Drawing NR 53711 5959323 Revision NR DTD 01/01/1939 and TDP Rev A Gen 3, with identification marking applied according to MIL-STD-130N. The contractor is required to comply with the Buy American Act and maintain safeguards for covered defense information as specified by DFARS regulations. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Manufacture and Supply of Access Covers (NSN 5340014090972)This subcontract involves the manufacture and supply of 377 specialized access covers for prime contractors working on Department of Defense projects under the DLA Weapons Support Land Supply Chain. The fabrication must strictly adhere to Drawing NR 19207 12273848 and 19207 12273849, Revision D, utilizing precision metal fabrication equipment. Performance will take place in New Cumberland, Pennsylvania. The contractor is required to maintain strict regulatory compliance, including MIL-STD-129 for marking and DFARS 252.223-7008 regarding the use of hexavalent chromium. Additionally, the provider must meet DFARS 252.204-7012 cybersecurity standards to ensure the protection of sensitive information. The project falls under NAICS code 332710.
Machine Shops

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332311
New
DIBBS
Fabrication and Supply of Valve Actuator GuardsThis subcontract involves the fabrication and supply of 1,282 Valve Actuator Guards for the DLA Weapons Support Land Supply Chain. The manufacturer is responsible for producing the units according to Army and DCSC Drawing 16236 CS-2300-0001 specifications, applying Chemical Agent Resistant Coatings, and adhering to MIL-STD-1916 zero-based sampling standards. Finished, coated, and packaged guards must be delivered to DLA Distribution Barstow. To be eligible for this project, the contractor must maintain CMMC Level 2 and ITAR compliance. The work falls under NAICS code 332311 and is managed under the Department of Defense. Interested parties must respond by November 16, 2026.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 321920
New
DIBBS
Supply of Bail HandlesThis subcontract involves the manufacture or procurement of 357 bail handles for prime contractors supporting Defense Logistics Agency projects under the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet specific part requirements and are delivered FOB Origin to Tracy, California. Strict adherence to military standards is required, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the provider must comply with IP025 and DFARS 252.223-7001 regarding the handling of hazardous materials and must maintain CMMC Level 2 certification.
Wood Container and Pallet Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331210
New
DIBBS
Raw Material Supply for NSN 5355-01-191-0559This subcontract involves the supply of raw material stock to prime contractors for the manufacture of Knob NSN 5355-01-191-0559, supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider is responsible for sourcing materials that strictly adhere to the chemical and physical properties defined in the part standard and delivering the stock directly to the manufacturer. To ensure quality and regulatory adherence, the provider must furnish Material Certifications and Mill Test Reports, which are essential for maintaining traceability and confirming compliance with the Buy American Act. The performance of this contract is centered at Tinker AFB, with a response deadline set for November 16, 2026.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Precision Machined Knob FabricationThis subcontract involves the precision fabrication of 107 units of Knob NSN 5355-01-191-0559 for the DLA Weapons Support Land Supply Chain. The project requires the use of precision machining equipment to ensure all components meet military specifications as outlined in the DLA Master List of Technical and Quality Requirements RA001. Performance will take place at Tinker AFB. The contractor is responsible for the full production cycle, including manufacturing, quality control sampling per MIL-STD-1916 or ASQ H1331, and final packaging and labeling in compliance with MIL-STD-129 and ASTM D3951. The final deliverable consists of 107 finished knobs meeting all specified technical and quality standards.
Machine Shops

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Delivery ServicesThis subcontract for MIL-SPEC Packaging and Delivery Services supports the DLA Weapons Support Land Supply Chain by providing specialized military-grade packaging, labeling, and shipping for precision hardware. The contractor is responsible for ensuring all springs are packaged according to ASTM D3951 and RP001 DLA requirements, with labeling strictly adhering to MIL-STD-129 standards. The scope of work includes coordinating the final delivery of these materials to Industries of the Blind Inc. located in Greensboro, North Carolina. This project falls under NAICS code 488410 and is managed under the Department of Defense.
Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
Manufacture and Supply of Helical Torsion Springs (NSN 5360-01-195-8874)This subcontract involves the manufacture and supply of 43 helical torsion springs for the DLA Weapons Support Land Supply Chain. The contractor is required to fabricate the units to NSN 5360-01-195-8874 specifications using traditional spring winding and coiling machinery, as additive manufacturing is strictly prohibited. Performance will take place in Greensboro, North Carolina, under NAICS code 332613. The project mandates strict adherence to MIL-STD-130N for identification marking and DLA Master List RA001 quality standards. Additionally, the contractor must maintain cybersecurity compliance in accordance with DFARS 252.204-7012. The final deliverable consists of 43 finished and inspected springs.
Spring Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488190
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for the DLA Weapons Support Land Supply Chain involves providing specialized preservation, packaging, and marking services for two mounting plates. The contractor is responsible for executing all work in strict accordance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Preservation Method 10. A critical safety requirement is the total prohibition of mercury or mercury compounds during the process, and the service provider must hold formal certification in MIL-STD packaging standards. The project is managed under NAICS code 488190 and will be performed in Tracy, California. Interested parties must respond by November 16, 2026, to support prime contractors in meeting Department of Defense specifications for the delivery of these components.
Other Support Activities for Air Transportation

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Precision Fabrication of Mounting Plates (NSN 5340-01-671-7109)This subcontract involves the precision fabrication of two mounting plates for the DLA Weapons Support Land Supply Chain, specifically adhering to NSN 5340-01-671-7109 standards. The scope of work requires precision machining and forming, with a strict prohibition on the use of additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332710. To qualify and execute the contract, the provider must hold JCP certification for technical data access and maintain strict compliance with ITAR, EAR, and NIST SP 800-171 regulations. Interested parties must respond by November 16, 2026, to ensure all finished plates meet the required technical specifications for the prime contractors.
Machine Shops

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
Spring Wire Material Supply
Spring Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring Fabrication
Spring Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS