Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CYLINDER ASSEMBLY, ACTU

Active
SPE4A7-26-T-696VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of three linear actuating cylinder assemblies, identified by NSN 1650-01-660-7151 and part number 9694-C from Columbus Jack Corporation. The solicitation, SPE4A7-26-T-696V, is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense. The required delivery date is March 3, 2028, with a delivery window of 546 days. The agreement mandates strict adherence to DLA technical and quality requirements, including specific physical identification and packaging standards such as ASTM D3951 and MIL-STD-129. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. Final inspection and acceptance will occur at the destination, with shipments delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB.

General Info

DoD procurement of three linear actuating cylinders from Columbus Jack Corporation by 2028.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

SDVOSBC

Documents

(1)

SPE4A7-26-T-696V.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
April Reed
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER ASSEMBLY,ACTUATING,LINEAR
CYLINDER ASSEMBLY,A
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
COLUMBUS JACK CORPORATION 00994 P/N 9694-C
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018067306 0001 EA 3.000
NSN/MATERIAL:1650016607151
DELIVERY (IN DAYS):0546
DELIVER FOB: ORIGIN
SPE4A7-26-T-696V
SECTION B
PR: 7018067306 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:03/03/2028 Original Required Delivery Date:03/03/2028
SPE4A7-26-T-696V NSN/Part Number: 1650-01-660-7151 Quantity: 3 EA Purchase Request: 7018067306QTY: 3 Delivery: 546 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
HINGE, NACELLE PANEL
Solicitation # SPE4A7-26-T-658K
Solicitation SPE4A7-26-T-658K is a fixed-price request for quotations issued by DLA Aviation for the procurement of nacelle panel hinges, identified by NSN 1560-00-023-9397 and part number 65302-12003-114. The requirement consists of two line items totaling 15 units, with 2 units destined for DLA Distribution Cherry Point and 13 units for DLA Distribution San Diego. The need ship date is February 12, 2027, with an original required delivery date of June 25, 2027. Delivery terms are FOB Origin, and the government will utilize Government-Arranged Transportation under the First Destination Transportation program. The items are designated as critical application items and must be manufactured according to drawing 65302-12003, with specific exceptions regarding the use of Sikorsky and MIL specifications for materials and finishes. Quality assurance requires compliance with ISO 9001:2015 and specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and IP025. The contract incorporates strict regulatory compliance, including CMMC Level 2 Self-Assessment, the Buy American Act, and the Berry Amendment. Inspection and acceptance will occur at the destination.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A6-26-T-16SB
Solicitation SPE4A6-26-T-16SB is a Firm Fixed Price request for quotations issued by the Defense Logistics Agency's ASC Commodities Division for the procurement of three structural aluminum plates (NSN 1560-01-723-7586). The delivery is required within 198 days of the solicitation date, with the place of performance and delivery designated as the DDSP New Cumberland facility in Pennsylvania. The contract is governed by the DLA Master Solicitation Revision 05 and requires adherence to specific technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and barcoding. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization to access technical data. Compliance requirements include CMMC Level 2 cybersecurity standards, NIST SP 800-171, and electronic invoicing via the Wide Area Workflow system. Inspection and acceptance will occur at the destination, with quality assurance based on MIL-STD-1916 and ASME Y14.5M standards. Quotations must be submitted electronically through the DLA Internet Bid Board System by August 21, 2026.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A7-26-T-695R
Contract DI-NDTI-80809B under solicitation SPE4A7-26-T-695R is for the procurement of 10 units of part number 0001S00000062. The agreement requires the contractor to provide a Production Lot Test report to the Quality Assurance Representative for review, ensuring all results align with the technical data package tolerances. Delivery is mandated within 156 days after receipt of the order. Shipments must be accompanied by comprehensive documentation, including DD Form 1222, a signed DD Form 250 or iRAPT receiving report, and a copy of the contract. Additionally, the contractor must provide material and process certifications, inspection method sheets, and applicable drawings. This federal contract is managed by the Department of Defense ASC Supplier Oper AE and AF Div, with performance taking place in San Diego, California.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HEAD, LINEAR ACTUATING
Solicitation # SPE4A7-26-T-697N
This contract is for the procurement of seven linear actuating cylinder heads, identified by NSN 1650011100251 and TransDigm part number 02-1411. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California, by May 18, 2027. The delivery terms are FOB Origin, with a required delivery window of 256 days after order. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with inspection and acceptance occurring at the origin. Item Unique Identification is not required for this order, and the contract allows for zero quantity variance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
BELT, V, 2-BAND, AIRCR
Solicitation # SPE4A7-26-T-666F
Solicitation SPE4A7-26-T-666F is a fixed-price request for quotations issued by DLA Aviation for the procurement of 13 aircraft V-belts, identified by NSN 1680015193510 and Rix Industries part number 41-B82-2. The delivery is required within 171 days after the award, with shipping terms set as FOB Origin. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will take place. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance requires zero non-conformances in sample lots, with sampling methods following MIL-STD-1916 or ASQ H1331. Technical requirements are governed by the DLA Master List, and the contractor must comply with the Buy American Act and the Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area Workflow system. Additionally, the solicitation prohibits the use of additive manufacturing unless authorized and forbids the use of mercury or mercury compounds in packaging.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
BOOST PUMP BYPASS C
Solicitation # SPE4A7-26-T-696G
This contract is for the procurement of 14 units of the Boost Pump Bypass C, identified by NSN 1680-01-585-4867 and part number 24C236. The item is designated as a critical application item and is associated with manufacturers such as The Boeing Company and Allen Aircraft Products Inc. Delivery is required within 95 days after the order, with a required delivery date of December 8, 2026, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 standards and CMMC Level 2 self-assessment. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-defect acceptance policy for sample lots. Packaging must comply with ASTM D3951 and MIL-STD-129, while item unique identification is not required per the service customer's request.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
REPAIR KIT, AIRCRAFT, MA
Solicitation # SPE4A6-26-T-17MR
Solicitation SPE4A6-26-T-17MR is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 31 aircraft maintenance repair kits, identified by NSN 4920015627516. This acquisition is designated as a small business set-aside, specifically for women-owned small businesses. The required delivery date is June 12, 2027, with a need ship date of February 12, 2027, and a delivery window of 171 days after order. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict adherence to technical and quality standards, including DLA Master List requirements, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key compliance requirements include CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. The item is classified as a commercial item and a critical application item, with specific part number references to Honeywell International Inc. and Diagnostic Solutions International LLC.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
PEDESTAL, BARRIER
Solicitation # SPE7M4-26-T-368G
This contract is for the procurement of two barrier pedestals, identified by NSN 1710-00-114-2282 and part number 52W1736-1 from Curtiss-Wright Flow Control Service. The order is designated as a critical application item and requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania by May 16, 2027. Shipping is set as FOB Origin with a delivery window of 249 days. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements, MIL-STD-129 labeling, and ASTM D3951 packaging guidelines. Compliance with Cybersecurity Maturity Model Certification Level 2 and the protection of covered defense information is required. Additionally, the contract prohibits the use of class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, except where specifically authorized for functional components.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-694L
This solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is for the procurement of two elevator fairing assembly strip inboard ends under part number 0001S00000052. The contract requires delivery within 486 days after the order is placed and is associated with NAICS code 336413. Performance will take place at Robins Air Force Base. The contract is subject to stringent security and quality mandates, including Covered Defense Information and CMMC Level 2 certification. It incorporates various DLA master technical and quality requirements, specifically regarding packaging, physical identification, and inspection at origin. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access the data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MOUNT, RESILIENT, WEA
Solicitation # SPE4A5-26-T-389X
This contract is for the procurement of seven resilient weapon system mounts, identified by NSN 5342000122331 and Lord Corporation part number J-11643-1. The items are classified as critical application components with a non-extendable shelf life of 60 months. Due to the proprietary nature of the technical data package, competitive procurement is limited, and the items must adhere to specific DLA quality and physical identification marking requirements. Delivery is required within 20 days of the order, with FOB and inspection points set at the origin. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with final shipment directed to the Netherlands Defense Traffic Bureau and the Air Depot 983 Squadron in Hoogerheide, NL. Sampling and quality assurance will be conducted according to MIL-STD-1916 or ASQ H1331 standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CONNECTOR, MULTIPLE, FLU
Solicitation # SPE7M3-26-T-8682
This contract, identified as SPE7M3-26-T-8682, is a total small business set-aside solicitation issued by the Department of Defense Fluid Handling Division for the procurement of two multiple fluid pressure line connectors. The required hardware is identified by NSN 4730-01-383-5231 and RIX Industries part number A455-B4595-5. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California, by March 30, 2027. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination. The contract incorporates technical and quality requirements from the DLA Master List and specifies a delivery window of 202 days.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
FILTER ELEMENT, INTAKE
Solicitation # SPE7L4-26-T-6614
This contract, identified as SPE7L4-26-T-6614, is a solicitation for the procurement of 16 intake air cleaner filter elements under NSN 2940-01-541-5685. The requirement specifies compatible part numbers from WIX Corp, Caterpillar Inc, Cummins Filtration Inc, and Honeywell International Inc. Delivery is required within 160 days, with a need ship date of February 16, 2027, to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will occur at the destination, and the shipping terms are set as FOB Origin with a zero percent quantity variance allowed.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541512
New
DIBBS
CMMC Level 2 Compliance and Cybersecurity SupportThis subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, seeks a provider to deliver cybersecurity support focused on achieving and maintaining CMMC Level 2 compliance and adherence to DFARS 252.204-7012. The scope of work includes performing system assessments and managing incident reporting to ensure all security requirements are met. The project is categorized under NAICS code 541512 and will be performed at Tinker AFB. Interested parties must submit their responses by the deadline of September 3, 2026.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493130
New
DIBBS
Packaging, Preservation, and Hazardous Materials ComplianceThis subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, requires the packaging and preservation of aircraft frames. The contractor must ensure all work adheres to DLA RP001 and MIL-STD-129 standards, including all necessary labeling and hazardous materials compliance. The performance of this contract will take place at Tinker AFB, zip code 73145-8000. Interested parties must submit their responses by the deadline of September 3, 2026, following the posting date of August 26, 2026. The project is categorized under NAICS code 493130.
Farm Product Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Item Unique Identification (IUID) and Physical MarkingThis subcontract, issued by the Department of Defense through the ASC Supplier Oper AE and AF Div, requires the application of permanent Item Unique Identification data matrix markings to aircraft frames. All markings must be performed in accordance with MIL-STD-130 standards, and the contractor is responsible for registering each item within the DoD IUID registry. The work is to be performed at Tinker AFB in Oklahoma. Interested parties must submit their responses by September 3, 2026, following the solicitation posted on August 26, 2026. The project falls under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Precision Manufacturing of Aircraft FrameThis subcontract with the Department of Defense involves the precision manufacturing of seven aircraft frames under part number 35-8220-502. The scope of work encompasses the full production cycle, including fabrication, assembly, and quality assurance, ensuring all components strictly adhere to established aerospace engineering specifications and standards. The project is managed by the ASC Supplier Oper AE and AF Div and will be performed at Tinker AFB in Oklahoma. Interested parties must submit their responses by September 3, 2026, in accordance with the solicitation posted on August 26, 2026, under NAICS code 336412.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Data ManagementThe Supply Chain Traceability and Data Management subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, requires the maintenance of comprehensive supply chain traceability. Key obligations include providing material certifications and lot tracking to ensure full visibility of the supply chain. The contractor must support electronic data interchange with DLA systems utilizing ANSI X12 standards. This opportunity was posted on August 26, 2026, with a response deadline of September 9, 2026, and falls under NAICS code 541611.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 493190
New
DIBBS
Defense-Compliant Packaging and Marking ServicesThe Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is seeking a subcontractor to provide military-compliant packaging, preservation, and marking services. The selected provider must ensure all work is performed in strict accordance with DLA RP001 and MIL-STD-129 standards to facilitate proper shipment and storage. This opportunity falls under NAICS code 493190 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 9, 2026.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
Precision Machine Screw Manufacturing for Critical ApplicationThis subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the manufacture and delivery of critical application machine screw assemblies under part number ABS20642-4F14. The project falls under NAICS code 332722 and mandates strict adherence to military specifications regarding quality control, detailed inspection, and full traceability. The solicitation was posted on August 26, 2026, with a response deadline of September 9, 2026. Interested parties must ensure all technical requirements for these critical components are met to comply with the agency's rigorous standards for aerospace and air force divisions.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
Manufacture of Speed Brake Drum (NSN: 1560010188300)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThis subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, involves the domestic and international freight logistics for transporting packaged rivets from the United States to Jubail, Saudi Arabia. The scope of work encompasses the full transportation process, including the management of all necessary export documentation and the handling of customs clearance to ensure the successful delivery of the materials. The opportunity was posted on August 26, 2026, with a response deadline of September 3, 2026. Classified under NAICS code 484220, the contract focuses on specialized freight transportation services to meet the logistical requirements of the agency.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Military Packaging, Marking, and Palletization ServicesThis subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the packaging, marking, and palletizing of blind rivets. The services must be performed in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, with delivery terms set as FOB origin. The project falls under NAICS code 561910 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 3, 2026.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Blind Rivet Manufacturing and SupplyThis subcontract through the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, requires the manufacture and supply of 10,000 blind rivets. All units must strictly adhere to NSN 5320-01-480-1646 specifications and maintain full ITAR and EAR compliance. The opportunity was posted on August 26, 2026, with a response deadline of September 3, 2026. This procurement falls under NAICS code 332510 and is managed via the DIBBS system.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Conformance Inspection and TestingThe Department of Defense, through the ASC Supplier Oper AE and AF Div, is seeking a subcontractor for Quality Conformance Inspection and Testing. The scope of work involves performing quality inspections and testing utilizing calibrated equipment in accordance with MIL-STD-1916 or ASQ H1331 zero-based sampling plans. This opportunity is categorized under NAICS code 541380 and will be performed in Phoenix, Arizona. Interested parties must submit their responses by the deadline of August 28, 2026.
Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

in 1 day
View Details