Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Cylinder Assembly_End_Item_B-02_NSN_1650013724178_PN_DAB3122A004-011

Active
FD20302700119Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Air Force, through the 423rd SCMS at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of a Cylinder Assembly designated by NSN 1650-01-372-4178 and Part Number DAB3122A004-011 for use on Platform B-02. This is not a solicitation and no contract will be awarded based on this effort; funds are not currently available. The requirement is for three units and encompasses full new manufacture including component procurement, inspection, testing, packaging, shipping, and supply chain management, with potential responsibilities for nonrecurring engineering costs to qualify as an approved source. The effort is focused solely on spares procurement with no repair component involved. The NAICS code 336413 applies with a size standard of 1,250 employees, and the government is actively seeking participation from all categories of businesses, including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, to assess competition and potential for a small business set-aside. Responses must be submitted through the “Add Me to Interested Vendors” button and are due by August 6, 2026, 4:59 AM Central Standard Time. All communication should be directed to the designated workflow email, and inquiries for a solicitation will not be addressed as no formal procurement is currently planned.

General Info

U.S. Air Force seeks qualified manufacturers for new Cylinder Assembly DAB3122A004-011 for B-02 platform, no funds or contract yet.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OK, USA

Set-Aside

NONE

Documents

(1)

Sources Sought Notice FD20302700119 for Spares Procurement NSN 1650-01-372-4178

PDF•sources-sought

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSources Sought
Posted

Sources Sought

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City
Contacts1 person available
OfficeTINKER AFB, OK, 73145-3070, USA
Organization / Agency
Department Of Defense → Ok DLA Aviation At Oklahoma City
View Agency Profile
Office AddressTINKER AFB, OK, 73145-3070, USA
Contacts
Workflow
contact@example.gov

Full Description

Show more

Spares Procurement of: Cylinder Assembly


Platform: B-02


NSN: 1650-01-372-4178
P/N: DAB3122A004-011


Notice ID (PR#): FD20302700119


AMC/AMSC: 3P


Department/Ind. Agency: DEPT OF DEFENSE
Sub-tier: DEPT OF THE AIR FORCE
Major Command: AFMC
Sub Command: AIR FORCE SUSTAINMENT CENTER
Office: 423rd SCMS


GENERAL INFORMATION


• Contract Opportunity Type: Sources Sought (Original)
• All Dates/Times are: (UTC-05:00) CENTRAL STANDARD TIME, CHICAGO, USA


Classification


• Federal Stock Class (manufacture): 1650
• NAICS Code: 336413


The proposed North American Industry Classification Systems (NAICS) Code has a corresponding Size Standard of 1,250 employees. The Government is interested in all businesses to include, Large Business, Small Business, Small Disadvantaged Businesses 8(a)s, Service-Disabled Veteran-Owned Small Businesses, Hubzone Businesses, and Women-Owned Small Businesses.


• Place of Performance: Tinker AFB, OK 73145 USA


CONTACT INFORMATION


Organization: 423rd SCMS
Workflow Email: 423scms.guea.workflow@us.af.mil
SEND RESPONSES HERE


PURPOSE/DESCRIPTION


INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT.


THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE.


This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential sources for the requirements identified below and to determine if this effort can be competitive or a Small Business Set-Aside. The Government may consider breaking the requirement out by airframe. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited.


The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. The Government is interested in all potential sources including Small Businesses, Small Disadvantaged Businesses, 8(a) businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, Women-Owned Small Businesses, etc.


The 423rd SCMS Supply Chain Management Squadron located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the spares procurement of the NSN(s) listed below.


REQUIREMENTS


Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below:


THIS IS A NEW SPARES BUY AND DOES NOT HAVE A REPAIR REQUIREMENT.


Part Number: DAB3122A004-011
NSN: 1650-01-372-4178
Estimated Spares Requirement: 3ea

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
NRP, LP HOSE ASSY-6A
Solicitation # SPE8EF-26-T-1589
This contract pertains to the procurement of NRP, LP HOSE ASSY-6A, identified by NSN 1730-01-655-9887 and part number 8028-080-8050-6 from PROGRESSIVE HYDRAULICS, INC., with a quantity of five units to be delivered under solicitation SPE8EF-26-T-1589. The item is classified as a TYPE I (CODE S) with a non-extendable shelf life of 60 months, as mandated by RS023, and requires compliance with DLA packaging standards under RP001 and MIL-STD-2073-1E, including specific packing methods, preservation, and marking per MIL-STD-129 with Special Marking Code 32. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The required delivery date is 167 days from contract award, with an original deadline of March 8, 2027, and a need ship date of February 1, 2027. The item must be shipped to the designated delivery address in Tracy, California, under transportation guidelines noted in DLAD Procurement Notes C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the version in effect on the solicitation issue date controls. The contract is subject to Covered Defense Information clauses and utilizes the DoD unit of issue, with pricing set at $5.00 per unit for a total value of $25.00.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
STEP, AIRCRAFT
Solicitation # SPE4A0-26-T-4173
This contract is for the procurement of one unit of a specific aircraft component identified by NSN 1560016184311 and part number 70217-02500-042 from Sikorsky Aircraft Corporation, with delivery required within five days of award at FOB origin. The item must be packaged and labeled in full compliance with DLA packaging requirements, specifically RP001, and marked per MIL-STD-129; if nonhazardous, packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical requirements. Traceability documentation must be retained by the contractor under DLA Directive Procurement Note C03 from August 2016, and physical identification of the item must be performed as specified under RQ017. The contractor must also comply with Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Sampling for conformity is permitted under Sikorsky’s alternate plan QAP 1201, provided it meets or exceeds the standards of ASQ H1331 or MIL-STD-1916. Inspection and acceptance occur at destination, with no tolerance for quantity variance. Delivery must be shipped via a fast, traceable means, strictly avoiding parcel post, to the designated Naval Air Station North Island location. Unit of issue is each, and item unique identification is not required per service customer request. The delivery deadline is July 31, 2026, and all technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-617T
The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, LANDING, AIRCRAFT
Solicitation # SPE4A6-26-Q-1229
The contract pertains to the procurement of 80 units of a light landing aircraft component identified by NSN 6220-01-437-7640, with 40 units destined for Hill AFB, Utah, and 40 for Robins AFB, Georgia. Delivery is required within 634 days after award, with inspection and acceptance occurring at the manufacturer’s origin, and FOB terms also set at origin. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including specific preservation, wrapping, cushioning, and unit container specifications, with marking adhering to MIL-STD-129 and a “Fragile” designation. The item is classified as a critical application item and requires adherence to SAE AS9100 quality management standards for both manufacturers and non-manufacturers. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. A Certificate of Conformance is permitted unless explicitly withheld by a quality assurance instruction. The contractor must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation amendment dates. A government first article test is required for one unit, as specified under FAR 52.209-4, and the contract includes detailed transportation instructions and shipping addresses for both distribution points.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
CRADLE, GROUND HANDL
Solicitation # SPE8EF-26-T-1556
The contract pertains to the procurement of 13 units of a cradle ground handling item identified by NSN 1730-01-362-0348 under solicitation SPE8EF-26-T-1556, with a response deadline of August 17, 2026, and a delivery requirement within 167 days of award. The item is subject to stringent DLA packaging, technical, and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and the contract incorporates requirements for handling Covered Defense Information. Export control restrictions apply due to technical data governed by ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completion of DLA-specific training, and formal authorization. Additionally, contractors must remove any government identification from non-accepted supplies. The procurement is managed by the Department of Defense under NAICS code 336413, with performance located in New Cumberland, Pennsylvania, and primary contact information provided for Russell Keiser.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A5-26-T-331N
The contract is for a single-leg wire rope assembly with part number 0001S00000052 and a quantity of eight units, issued under solicitation SPE4A5-26-T-331N with a delivery deadline of 509 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per RQ017, and component qualification is required under QPL/QML lists referenced in procurement note H02. Inspection and acceptance occur at the manufacturer’s origin unless otherwise directed. Sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless stated otherwise. The item is subject to export controls under ITAR or EAR, with technical data restricted to contractors holding approved JCP certification, having completed required DOD export control training, and received DLA authorization. DFARS 252.225-7048 governs the handling of this controlled data, extending restrictions to all foreign nationals regardless of location. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO. Covered defense information is subject to RD002, and the contractor must comply with tailored higher-level quality requirements. Item Unique Identification is not required per customer request, with DFARS 252.211-7003(c)(1)(i) applying. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division with performance in New Cumberland, PA, and primary point of contact is Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT ENGI
Solicitation # SPE8EF-26-T-1565
This contract pertains to the procurement of a cover for an aircraft engine, identified by part number WL19C92-2 and NSN 1730-01-367-2938, with a quantity of 41 units to be delivered FOB origin. The delivery must be completed within 247 days from the contract award, with a required ship date of April 22, 2027, and an original delivery deadline of May 19, 2027. All items must be packaged in accordance with ASTM D3951, but must fully comply with the more stringent DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity delivery. Inspection and acceptance occur at the destination, and all supplies must be delivered to the specified DLA Distribution Depot in Tinker AFB, Oklahoma. The contract includes mandatory compliance with cybersecurity requirements under CMMC Level 2 Self-Assessment due to the handling of covered defense information, and all technical and quality specifications are governed by referenced R or I numbers within the DLA Master List. The solicitation, identified as SPE8EF-26-T-1565, was issued on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 336413 for aircraft engine and engine parts manufacturing. The contractor is required to remove any government identification from non-accepted supplies and must ensure that the delivered item is for a critical application. The point of contact for inquiries is Russell Keiser of the Defense Logistics Agency, and all transportation logistics follow DLAD procedural notes C19 and C20. The total contract value is $1,681.00 based on a unit price of $41.00 per item.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT GROUND
Solicitation # SPE8EF-26-T-1542
The contract pertains to the procurement of 45 units of aircraft ground servicing covers identified by NSN 1730-00-675-3215 under solicitation SPE8EF-26-T-1542, with a delivery deadline of 407 days from award. The item is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. The technical data associated with this item is classified as covered defense information and is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure or transfer, including to foreign nationals within the United States. Contractors must be certified under the US/Canada Joint Certification Program, have completed mandatory DOD export control training, and obtain formal approval from DLA to access the controlled data. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with validated credentials may handle the technical data. The contract also requires CMMC Level 2 certification for any third-party assessment organization involved, reflecting heightened cybersecurity mandates. The placing agency is the Department of Defense, with performance taking place in New Cumberland, PA, and the point of contact is Russell Keiser, reachable via official DLA channels.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CLAMP, BLOCK
Solicitation # SPE4A5-26-T-331D
The contract pertains to the procurement of 101 units of CLAMP, BLOCK with NSN 1560016946944 and part number 842-349845-14, intended for a critical application under The Boeing Company. Delivery is required within 170 days from the contract date, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with stringent packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement standards, and palletization follows RP001 guidelines. The part is subject to FAA bare item marking requirements and airworthiness approval under RQ019, necessitating a Certificate of Airworthiness and Conformance. Supply chain traceability documentation must be retained per DLA Directive Procurement Notes C03, and configuration change management is governed by RQ002. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute levels are predefined as VII, IV, and II for critical, major, and minor characteristics respectively. The acquisition falls under simplified procedures, with technical and quality requirements referenced from the DLA Master List, and no unit of issue translation is needed as the DoD unit is used. All applicable CDRLs and technical data packages are to be reviewed, with the delivery address specified as the DLA Distribution facility in New Cumberland, PA. The contract solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and the original required delivery date is September 3, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CUSHION, BOTTOM, EXPL
Solicitation # SPE8ED-26-T-1223
The item is a cushion designed for bottom use in a shipping and storage container, identified by NSN 8135-01-029-1285, with a quantity of 52 units required under purchase request 7017758186. Delivery is scheduled 167 days after award. The solicitation number is SPE8ED-26-T-1223, posted on August 5, 2026, with responses due by August 17, 2026. This procurement falls under NAICS code 336413 and is managed by the Department of Defense under the Construction & Equipment Containers organization, with performance to be completed in Tracy, California, 95304-5000. Ogden Howard is the primary point of contact, reachable via email and phone provided. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting its disclosure or transfer to foreign persons, regardless of location, including employees of foreign subsidiaries of U.S. companies. Access to this controlled data is limited to DLA contractors with an approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled technical data and have been formally authorized by DLA. Compliance with DFARS 252.225-7048 is required, and failure to adhere to these controls may result in legal penalties. The solicitation is publicly accessible through the DIBBS system.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PIVOT BLOCK ASSY, LA
Solicitation # SPE4A7-26-T-618N
The contract is for the procurement of 22 units of a Pivot Block Assembly with NSN 1560-01-165-5479 under solicitation SPE4A7-26-T-618N, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 79 days after award, with the place of performance located in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, or to foreign subsidiaries requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only DLA contractors with approved JCP certification, completion of mandatory DOD export control training, and approval from DLA authorities are permitted to access the technical data. The NAICS code is 336413, and all distribution must comply fully with DLA packaging and export control requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT GROU
Solicitation # SPE8EF-26-T-1545
The contract pertains to the procurement of aircraft ground servicing covers under solicitation SPE8EF-26-T-1545, issued by the Defense Logistics Agency with a total quantity of 25 units at a unit price of $25.00, resulting in a total contract value of $625.00. The item is identified by NSN 1730-01-082-6397 and part number 4-76040-501, and is subject to strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA Packaging Requirements for Procurement (RP001), including palletization standards. Delivery is FOB origin with zero tolerance for quantity variance and must occur within 167 days from the contract award, with the original required delivery date set for March 28, 2027. Inspection and acceptance occur at the destination, and the product must be delivered to the specified receiving warehouse in Tracy, California. The solicitation is a total small business set-aside under NAICS code 336413, with four qualified suppliers listed: Weckworth Manufacturing Inc, Coating Specialties Inc, Ganar Industries LLC, and Northrop Grumman Systems Corporation. The cover is intended for use in aircraft ground servicing operations, and the contract incorporates mandatory compliance with applicable defense logistics standards, including the removal of government identification from non-accepted supplies and the handling of covered defense information. The point of contact for the contract is Russell Keiser, and all transportation logistics are governed by DLAD procedures C19 and C20. The original need ship date is February 1, 2027, and responses to the solicitation were due by August 17, 2026, with the solicitation posted on August 5, 2026. The unit of issue is each (EA), and the order must follow the specified ANSI X12 unit of issue mappings as defined by the DLA.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 336412
New
Federal
GOVERNOR, PUMP, PRESS_End_Item_TF33_NSN_2915015571122RV_PN_5225-1181
Solicitation # FD20302700090
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of the Governor, Pump, Press with Part Number 5225-1181 and National Stock Number 2915-01-5571122RV, intended for use on the TF33 engine platform. This initiative, issued under Notice ID FD2030-27-00090, is not a solicitation or a commitment to award a contract, and no funds are currently available for this effort. The government is seeking information from potential suppliers capable of full-scale production, including component procurement, inspection, testing, preservation, packaging, and shipping, as well as management of long-lead items, diminishing manufacturing sources, and nonrecurring engineering costs necessary to qualify as an approved source. The estimated requirement is for 37 units, and the industry classification is NAICS 336412 with a size standard of 1,500 employees. All business sizes and categories—including Small Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses—are encouraged to respond. Responses must be submitted via the designated “Add Me to Interested Vendors” button by the deadline of August 6, 2026, 4:59 a.m. Central Standard Time. The point of contact for inquiries is the 421st SCMS Requirements Workflow email, and the place of performance is Tinker AFB, OK 73145. This market research aims to evaluate competition viability and determine if the requirement can be set aside for small business participation, but no contract will result from this notice alone.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 336413
New
Federal
CYLINDER ASSEMBLY,A_End_Item_B-02_NSN_1650015171294FW_PN_DAA3122A001-091
Solicitation # FD20302700123-00
The U.S. Air Force, through the 423rd SCMS Requirements Office at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential suppliers capable of manufacturing the Cylinder Assembly, Part Number DAA3122A001-091, with NSN 1650-01-517-1294FW, for use on the B-02 platform. This effort is a Sources Sought notice under FAR Part 10 and is not a solicitation or request for proposal; no contract will be awarded based on responses, and no funds are available at this time. The government is seeking information from all eligible businesses—including large firms, small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses—to assess market capability and determine whether the requirement can be fulfilled through competition or set aside for small business participation. The requirement involves the new manufacture of two units, including all associated labor, materials, inspection, testing, packaging, shipping, supply chain management, logistics planning, and handling of diminishing manufacturing sources and material shortages. Potential vendors may also be responsible for nonrecurring engineering costs to become an approved source. The North American Industry Classification System (NAICS) code 336413 applies, with a size standard of 1,250 employees. Responses must be submitted by August 13, 2026, through the designated workflow email, and interested parties must select the “Add Me to Interested Vendors” button to be considered. The place of performance is Tinker AFB, Oklahoma, and all communications must be directed to the 423rd SCMS Supply Chain Management Squadron.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
ACTUATOR,ELECTRO-PN_End_Item_B-02_NSN_1650013837666FW_PN_DAB3122A001-017
Solicitation # FD20302700122
The U.S. Air Force, through the 423rd SCMS at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources for the new manufacture of an electro-pneumatic actuator with part number DAB3122A001-017 and NSN 1650-01-383-7666FW, intended for the B-02 platform. This effort, issued under Notice ID FD20302700122, is a Sources Sought synopsis under FAR Part 10 and is not a solicitation or binding commitment; no funds are available for this research phase. The government seeks information from all business sizes and categories including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, with the intent to assess competition and determine if the requirement can be structured as a small business set-aside. The estimated need is for four units, and potential suppliers must demonstrate capability to handle full manufacturing cycles including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of part obsolescence or shortages, potentially including nonrecurring engineering costs. The North American Industry Classification System code is 336413, corresponding to a size standard of 1,250 employees, and the item falls under Federal Stock Class 1650. Responses must be submitted through the designated “Add Me to Interested Vendors” mechanism by the deadline of August 13, 2026, 4:59 a.m. Central Standard Time. The government will use responses gathered to inform future acquisition strategy but will not award contracts based on this market research alone. All communications and submissions should be directed to the workflow email provided, and no inquiries for a solicitation will be responded to at this stage. The performance location is firmly established at Tinker Air Force Base, Oklahoma, and the activity is managed under the Air Force Sustainment Center and Air Force Materiel Command.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
Clock, Panel_End_Item_Multi_NSN_6645000763050RK_PN_ABU11A
Solicitation # FD20302501835-02
The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a Clock, Panel item identified by NSN 6645-00-076-3050RK and Part Number ABU11A, with an estimated requirement of 13 units. This effort is a Sources Sought Synopsis under FAR Part 10 and is not a solicitation or a commitment to award a contract; no funds are available for this research phase. The government seeks information from potential vendors capable of end-to-end manufacturing, including component procurement, inspection, testing, packaging, shipping, and managing supply chain issues such as diminishing manufacturing sources and long-lead parts. All responses must include detailed business information, including company size, certifications such as Small Business, 8(a), HUBZone, Women-Owned, or Service-Disabled Veteran-Owned status, CAGE code, UEI, and ownership structure. The North American Industry Classification System code is 336413, with a size standard of 1,250 employees, and the government is open to all business types, including teaming arrangements. Potential suppliers must complete and submit a Source Approval Request package electronically through DoD SAFE, either directly with a PKI certificate or via a request for a drop-off if they lack one. Engineering data, including drawings, may be obtained through the Tinker Engineering Drawings Public Sales Desk, though the absence of an Engineering Data List means vendors must independently acquire necessary technical specifications. Responses are due by August 10, 2026, and must be submitted via the designated email address; inquiries sent to official originators will not be answered. This market research aims to determine if the requirement can be filled through competition or set aside for small businesses, and may lead to future solicitations broken out by airframe, though no award is anticipated from this notice. Participation requires using the “Add Me to Interested Vendors” button, and all submissions must be in writing; oral responses are not accepted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
DIRECTIONAL SLEEVE_End_Item_KC-135_NSN_1650006256630_PN_6-61567-1
Solicitation # FD20302700132
The Department of Defense, through the Air Force Sustainment Center’s 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of the Directional Sleeve, NSN 1650-00-625-6630, with part number 6-61567-1, for use on the KC-135 platform. This is a Sources Sought notice under FAR Part 10, not a solicitation, and no contractual commitment or funding exists at this time. The government seeks to determine potential vendor capabilities, assess market competitiveness, and evaluate if the requirement can be set aside for small or disadvantaged businesses, including 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses. The estimated requirement is for 21 units, with no repair component identified. Respondents must be capable of full manufacturing, including sourcing components, inspection, testing, packaging, shipping, and managing long-lead items and diminishing manufacturing sources, and may be responsible for nonrecurring engineering costs. Interested parties must complete and submit a Source Approval Request package via DoD SAFE to designated email addresses, along with the required business information, including company name, CAGE code, UEI, NAICS classification, and size status, by August 10, 2026. Technical data is available through the Engineering Data List and Manufacturing Qualification Requirements referenced in the notice, with engineering drawings obtainable through the Tinker Public Sales Desk. Responses must be submitted in writing only, and no oral submissions are permitted. The information collected will guide future acquisition planning and is not binding on the government. All correspondence must be directed through the specified official channels, and vendors are advised to review the official SAM.gov posting for updates to qualification requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
Frame, Access Hole _End_Item_B-2_NSN_1560014687510FW_PN_DAA3144A671-067
Solicitation # FD20302602419-SS
The U.S. Air Force, through the 424th Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research under FAR Part 10 to identify potential sources for the new manufacture of a Frame, Access Hole with NSN 1560-01-468-7510FW and part number DAA3144A671-067, intended for use on the B-2 platform. This is not a solicitation or a commitment to award a contract; no funds are currently available, and no contractual obligation will result from responses. The effort aims to assess industry capability, determine if the requirement can be competed, and evaluate potential for a small business set-aside, with interest in all business sizes including small, small disadvantaged, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses. Respondents must provide comprehensive business information, including CAGE code, UEI, size certification under NAICS code 336413, and ownership details, and must be prepared to meet rigorous qualification standards for sourcing and manufacturing. Potential sources must be capable of full new manufacture including component procurement, inspection, testing, packaging, and shipping, and may be required to assume nonrecurring engineering costs to become an approved supplier. Technical data is not provided by the government, and responders must independently acquire or demonstrate access to necessary engineering drawings and specifications through the designated Public Sales Desk. Compliance with Manufacturing Qualification Requirements (MQR), as referenced under MQR-PSD-1, is mandatory and includes submission of a Source Approval Request (SAR) package via DoD SAFE, accompanied by a certified Company Profile, SIP certifications for critical processes, Master Tooling certifications, and a signed Technical Data Rights Certification using Appendix E wording. Responses must include documentation of NADCAP, OEM, or DoD audit certifications where applicable and adhere to submission protocols strictly through designated email channels. All submissions are due by August 11, 2026, and must be submitted electronically with no oral responses permitted. The government will use this input solely for acquisition strategy development and planning purposes.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
ELECTRONIC COMPONEN_B1B_5998016319586EK_178K787G02
Solicitation # FD20302600791
The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of an electronic component identified by part number 178K787G02 and NSN 5998016319586EK for use on the B1B platform. This effort is a Sources Sought Synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on this notice. The government is seeking information on potential vendors capable of producing the component from scratch, including sourcing parts, inspection, testing, packaging, shipping, and addressing supply chain challenges such as diminishing manufacturing sources and long-lead items. An estimated requirement of 34 units exists, and potential contractors may also incur nonrecurring engineering costs to qualify as an approved source. The NAICS code is 336413 with a size standard of 1,250 employees, and the government welcomes responses from all business types including small businesses, 8(a) firms, service-disabled veteran-owned businesses, HUBZone businesses, and women-owned small businesses. Responses must be submitted via the designated workflow email, and all deadlines are in Central Standard Time. No funds are available for this market research phase.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 336412
New
Federal
FUEL CONTROL MAIN_End_Item_J85_NSN_2915012575403OK_PN_6001T8G09A
Solicitation # FD20302700144
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Fuel Control Main component with part number 6001T8G09A and NSN 2915012575403OK, intended for use on the J85 platform. This effort is a Sources Sought synopsis under FAR Part 10, not a solicitation, and no contract award or funding is intended at this stage. The government seeks information from all types of businesses, including small businesses, service-disabled veteran-owned firms, women-owned businesses, 8(a) certified entities, and HUBZone participants, to assess competitive potential and determine if a small business set-aside is feasible. The requirement involves full new manufacture, including component procurement, inspection, testing, packaging, shipping, supply chain management, and addressing diminishing manufacturing sources and material shortages, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. Manufacturing qualification requires submission of a Source Approval Request package through the DoD SAFE system, accompanied by technical data compliance, including adherence to the Manufacturing Qualification Requirements (MQR-PSD-1) referenced publicly on SAM.gov and any applicable Engineering Data List. Technical drawings, if referenced on the EDL, must be requested through the designated Tinker Engineering Public Sales Desk. Companies responding must provide detailed business information including CAGE code, UEI, NAICS classification, size status, ownership structure, and certifications to support market research objectives. Responses must be submitted by September 3, 2026, and all submissions must be in writing, with no oral responses accepted. The estimated spares requirement is anticipated to be fulfilled by December 27, 2027, though the exact solicitation schedule remains undetermined until market research concludes.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336413
New
Federal
CYLINDER ASSEMBLY,A_End_Item_B-02_NSN_1650015171312FW_PN_DAA3122A001-089
Solicitation # FD20302700125
The U.S. Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources capable of manufacturing the Cylinder Assembly, part number DAA3122A001-089, with NSN 1650-01-517-1312FW, for use on the B-02 platform. This effort, initiated under FAR Part 10, is not a solicitation and does not obligate the government to award a contract or allocate funds; rather, it seeks to gather information from industry to assess competition and determine whether the requirement can be fulfilled through a small business set-aside or other optimal acquisition strategy. Interested vendors must register via the “Add Me to Interested Vendors” button to participate in this market research phase. The Government requires suppliers to have the capability to fully manufacture the item from raw materials, including component procurement, inspection, testing, preservation, packaging, and shipping, along with managing supply chain risks such as diminishing manufacturing sources and long-lead items. Nonrecurring engineering costs may apply for qualifying as an approved source. The estimated requirement is three units, with unit pricing to be established only if and when a contract is awarded. The North American Industry Classification System code is 336413, which carries a size standard of 1,250 employees, and the government is actively seeking participation from a broad range of business types including small businesses, 8(a) firms, service-disabled veteran-owned businesses, HUBZone entities, and women-owned small businesses. Responses are due by August 6, 2026, at 4:59 a.m. Central Time, and all communications must be directed to 423scms.guea.workflow@us.af.mil.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 336413
New
Federal
Servocylinder Assem_End_Item_B-1_NSN_1650011848758_PN_L5872400-021
Solicitation # FD20302700138
The U.S. Air Force, through the 423rd SCMS at Tinker Air Force Base, is conducting market research to identify qualified sources capable of manufacturing new spares for the Servocylinder Assembly with NSN 1650-01-184-8758 and part number L5872400-021, intended for the B-1 platform. This is a Sources Sought notice under FAR Part 10, not a solicitation, and no contract will be awarded based on this posting. The government is seeking information to evaluate potential competition and determine whether the requirement can be set aside for small businesses, including Small Disadvantaged Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and Women-Owned Small Businesses. The estimated requirement is for 18 units, with a minimum of 5 and a maximum of 27, and the North American Industry Classification System code is 336413 with a size standard of 1,250 employees. Response must include detailed business information, certification status, and compliance with qualification requirements outlined in the Manufacturing Qualification Requirements and Engineering Data List, which are referenced but not provided in full within the notice. Interested vendors must complete a Source Approval Request package, submitted electronically via DoD SAFE to designated Air Force Sustenance Center contacts, and are required to independently obtain or request engineering drawings through the Tinker Public Sales Desk. The notice emphasizes that no funds are allocated for this market research, and responders must provide accurate data on business size, ownership, and certifications, including Unique Entity ID and CAGE code. All submissions must be in writing and received by September 3, 2026. Government-provided technical data is limited, and vendors are expected to secure necessary engineering documentation independently unless otherwise specified. The procurement strategy remains under evaluation, with potential future solicitation possibly segmented by airframe, and vendors are cautioned that responses will not be acknowledged and no contractual obligations are created by this notice.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336413
New
Federal
SURPLUS ONLY NSN:1680012672746RK NOUN:ACTUATOR,ELECTROMEC PIN: P/N: R1473M1
Solicitation # SPRTA1-26-Q-0421
The contract pertains to surplus surplus-only availability of an electromechanical actuator identified by NSN 1680012672746RK and part number R1473M1, with no new procurement intended. It was solicited under SPRTA1-26-Q-0421, posted on August 5, 2026, with a response deadline of August 20, 2026, at 8:00 PM UTC. The procurement falls under NAICS code 336413 for aircraft engine and engine parts manufacturing and is handled by the Department of Defense through the Office of DLA Aviation at Tinker Air Force Base, Oklahoma. All transactions and fulfillment are limited to surplus inventory already in government custody, and no new manufacturing or production is involved. The primary point of contact for inquiries is Patrick McGowan, reachable via phone at 405-734-8120 or email at patrick.mcgowan@us.af.mil. The contract type is combined, meaning it may include both purchase and disposal actions, with no specific set-aside for small businesses or other categories. Performance location is not explicitly defined beyond the issuing agency’s base.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336412
New
Federal
Roller Bearing_End_Item_J85_NSN_3110006185880OK_PN_327B430P1
Solicitation # FD20302700167
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of roller bearings with part number 327B430P1 and NSN 3110-00-618-5880, intended for use on the J85 platform. This is a Sources Sought synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on responses. The government seeks information from all potential vendors, including small businesses, disadvantaged businesses, service-disabled veteran-owned firms, HUBZone businesses, and women-owned small businesses, to determine if the requirement can be competed or set aside for small businesses. The estimated need is for 177 units, and potential suppliers must demonstrate capability to handle full manufacturing, inspection, testing, packaging, logistics planning, supply chain management, and address diminishing manufacturing sources and material shortages, including any associated nonrecurring engineering costs. Responses are due by August 10, 2026, and must be submitted through the designated workflow email address. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the place of performance is Tinker AFB, Oklahoma. The Department of the Air Force, under the Air Force Sustainment Center, is leveraging this effort to evaluate the industrial base and refine its acquisition strategy for future sourcing. No funds are currently available for this market research phase, and submissions will be used solely to inform future procurement decisions. Participation requires selecting the “Add Me to Interested Vendors” button on the posting.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details