CYLINDER, COMPRESSED GA

CYLINDER,COMPRESSED GAS,OXYGEN
CYLINDER, COMPRESSED GAS,SIZE D, EMPTY, EACH
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ALUMINUM, MEDICAL OXYGEN,
ALLIED HEALTHCARE
UNIT OF ISSUE IS EACH
BIDDER SHALL SPECIFY CO & P/N BEING SUPPLIED
ALLIED HEALTHCARE PRODUCTS, INC. 62842 P/N 31-10-0014
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017801262 0001 EA 2.000
NSN/MATERIAL:8120012533852
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
SPE4A0-26-T-4299
SECTION B
PR: 7017801262 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE PALLETIZED.
IF A PROPERLY PALLETIZED LOAD OF A SINGLE ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54
SPE4A0-26-T-4299
SECTION B
PR: 7017801262 PRLI: 0001 CONT’D
INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT
BE ADHERED TO.
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER
FOR ADDITIONAL GUIDANCE.
AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY
BE SUPPLIED.
IN ADDITION TO ALL MARKING REQUIREMENTS
SPECIFIED HEREIN AND IN THE APPLICABLE
SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA
DISTRIBUTION LOCATIONS SHALL ALSO REQUIRE
PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS
CLAUSE 252.211-7006.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCS 6505/6508/6509/6550.
LABELING AND MARKING. MATERIAL SHALL BE
LABELED AND MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.
MARKING ON EACH UNIT SHALL INCLUDE THE NSN
AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCs 6505 and 6509.
MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1 ((MMS NO. 1).
ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E., CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.
APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING THE SHIPMENT.
MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/
MMS NO. 1 MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL: DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT http://www.dla.mil/LandandMaritime/Offers/Services/ http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT TREATMENT OF WPM SHALL BE THE ONLY METHODS AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS. ADDITIONAL INFORMATION REGARDING DOD'S WPM REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING
SPE4A0-26-T-4299
SECTION B
PR: 7017801262 PRLI: 0001 CONT’D
WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/
OFFICES/PACKAGING/PALLETIZATIONWPMNOTICE.ASP.
BULK BREAK POINT:
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
RDD 999/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
MARKFOR
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
M/F: (TCN) WT4KDK62170560
RDD: 999
PROJ: 9GD TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/12/2026
SPE4A0-26-T-4299 NSN/Part Number: 8120-01-253-3852 Quantity: 2 EA Purchase Request: 7017801262QTY: 2 Delivery: 5 days ADO