Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CYLINDER, GRADUATED, LAB

Active
SPE2DS-26-T-324JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A laboratory-grade graduated cylinder, 100 milliliters in capacity, made of glass, is being procured with specifications including a single scale and a pour-out mouth, measuring 29 millimeters wide by 255 millimeters high. The item, identified by NSN 6640-00-420-0000 and a unit of issue of each, is required in a single quantity and must be delivered within 20 days of award under solicitation SPE2DS-26-T-324J. All packaging must comply with commercial standards as outlined in DLA Packaging Requirements for Procurement, ensuring each unit is sealed in a protective container to prevent breakage and shipped in suitable exterior containers that guarantee safe delivery at the lowest cost to the designated point of delivery. Items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, with documentation available through DLA Troop Support. The procurement falls under covered defense information protocols and incorporates technical and quality requirements from the DLA Master List, with the applicable revision tied to the solicitation date. Bidders are required to provide the source and part number of the supplied item, and the contract is managed by the Department of Defense’s Medical Supply Chain, with delivery targeted to FPO, ZIP 96693.

General Info

100mL glass graduated cylinder, single unit, delivered in 20 days, compliant with DLA packaging and medical marking standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

UNIT 100381 BOX 1, FPO, AP, 96693, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-324J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Lisa Thomas-Wright
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER,GRADUATED,LABORATORY
CYLINDER, GRADUATED, LABORATORY, GLASS, 100 ML<(>,<)>
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAL. TO DELIVER, 29 MM WIDE X 255 MM HIGH<(>,<)>
SINGLE SCALE W/POUR OUT MOUTH.
.
UNIT OF ISSUE EACH (EA)
.
.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
SPE2DS-26-T-324J
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6640-00-420-0000 Quantity: 1 EA Purchase Request: 7017786090QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
SODA LIME
Solicitation # SPE2DP-26-T-4569
Soda Lime in pellet form, 5 liters per unit, is procured under solicitation SPE2DP-26-T-4569 for use with device 6515-01-564-6213 and is regulated by the FDA. The contract specifies delivery of five units, each packaged in a sealed commercial container capable of preventing damage or breakage, with outer shipping containers meeting commercial standards for safe transport at the lowest cost to the destination. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include the NSN, manufacturer name and CAGE code, date of manufacture, expiration or retest date, contract number, and lot number. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged in accordance with ASTM D3951, though all DLA Master List requirements take precedence. Unit of issue is EA, quantity is five, and delivery is required within 20 days FOB destination with zero variance allowed. The destination is Fort Campbell, Kentucky, and shipment must be via traceable means, excluding parcel post. Labeling, marking, and palletization must adhere to DLA Packaging Requirements for Procurement, and compliance with all referenced technical and quality standards from the DLA Master List is mandatory. The contracting official must submit an EBS referral to confirm regulatory status, including bidder and manufacturer details. The original required delivery date is August 7, 2026.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
CAP, OPERATING, SURGICAL
Solicitation # SPE2DH-26-T-5887
This item is a disposable, bouffant-style surgical cap with a 21-inch diameter, made from non-woven, fire-resistant material in blue, sized for regular/medium use. It is packaged in units of 600 caps per package and must have a mandatory 60-month shelf life that cannot be extended, with no more than nine months allowed to have passed from the date of manufacture to the date of delivery to the government. The product must be marked in accordance with the latest edition of the Medical Marking Standard No. 1, and packaging must comply with DLA packaging requirements for procurement. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies. The item is identified by NSN 6532-01-308-5341, with a single package requested under purchase request 7017790847 and required delivery within five days of award. The solicitation is issued under SPE2DH-26-T-5887, with a response deadline of August 17, 2026, and performance will occur in Williamsburg, Virginia, under the oversight of the Department of Defense’s Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TEST TUBE, BLOOD COLLEC
Solicitation # SPE2DH-26-T-5890
The contract specifies the procurement of 100 glass blood collecting test tubes with vacuum seal, each measuring 16 by 125 mm and holding 15 ml, with rubber caps and no anticoagulant, supplied in a single package unit. These tubes are nonsterile and must have a minimum shelf life of 24 months, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Labels on each unit must clearly display the NSN, manufacturer and CAGE code, date of manufacture or expiration, and the contract or lot number. Bidders are required to provide the source and part number being offered in their proposals. Packaging must comply with commercial standards as defined in the procurement document, ensuring each unit is sealed in a container that prevents damage or breakage, and all units must be packed in suitable commercial shipping containers that ensure safe, cost-effective delivery to the specified point of delivery in Williamsburg, VA. All items must adhere to Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. The NSN is 6640-00-145-1143, the solicitation number is SPE2DH-26-T-5890, and the response deadline is August 17, 2026, with delivery required within five days after award. The contracting office is under the Department of Defense, Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SUNSCREEN PREPARATION
Solicitation # SPE2DP-26-T-4578
The contract is for the procurement of sunscreen towelettes with SPF 30, measuring 8x5 inches, individually sealed and packaged in units of 300 per package, under NSN 6505-01-586-4033. The product must have a non-extendable shelf life of 36 months, with no more than 31 months elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and adhere to commercial packaging requirements per ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements. Units must be sealed in suitable containers to prevent damage and packed in commercial shipping containers appropriate for safe transport at the lowest cost to the specified delivery point. The items must be marked and labeled according to DLA guidelines, and palletization must follow RP001 packaging standards. Hazardous material handling per FED-STD-313 and IP025 applies if applicable. The delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur upon arrival. Delivery is required within 20 days of contract award, with an original due date of August 11, 2026. Shipments must use traceable freight methods and are prohibited from using parcel post. The delivery address is the Naval Air Warfare Center in Pax River, Maryland, with point of contact provided. The procurement is under solicitation SPE2DP-26-T-4578, with purchase request number 7017790835 and unit of issue as PG.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
WATER SAMPLING TEST RE
Solicitation # SPE2DH-26-T-5877
The contract is for the procurement of water sampling test reagents for dissolved oxygen colorimetric analysis with a testing range of 0 to 40 ppb and a reaction time of 30 seconds, supplied in unit of issue packages containing 30 items per pack, with a total quantity of 40 packs required. The item is identified by NSN 6630-01-068-5210 and is tied to purchase request 7017786150, with delivery required within 20 days after order. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is sealed in a container that protects against damage and breakage, and all shipments must use approved commercial exterior containers suitable for safe delivery by common carrier at the lowest cost to the designated FPO address. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision is determined by the solicitation or award date. This solicitation, identified as SPE2DH-26-T-5877, was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 423450, managed by the Department of Defense’s Medical Supply Chain FSH office, with Tina Vu listed as the point of contact. The requirement also includes compliance with covered defense information provisions and DLA packaging standards, with bidders required to clearly specify the source and part number being offered.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
INDICATOR, STERILIZATIO
Solicitation # SPE2DH-26-T-5868
The contract is for the procurement of sterilization indicators, specifically steam tamper-proof strips designed for use with sterilization container systems, identified by NSN 6530-01-351-1698. The product is supplied in packages of 1,000 units each and must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA requirements, and non-accepted supplies must have all government identification removed. The solicitation, issued under number SPE2DH-26-T-5868, was posted on August 9, 2026, with responses due by August 17, 2026. The requirement is for a single package, with a delivery deadline of 84 days after award, and the place of performance is specified as APO 09227-0000. The contracting activity falls under the Department of Defense, Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly state the source and part number being offered to ensure compliance with specifications.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5888
The contract is for the procurement of surgical drapes, specifically plastic disposable drapes measuring 51 by 51 inches with a sterile certification and a clear adhesive area of 3-7/8 inches by 4-7/8 inches. Each unit is packaged in a sealed container designed to protect the contents from damage and is further arranged in commercial shipping containers suitable for safe transport via common carriers at the lowest possible rate to the designated delivery point in Williamsburg, Virginia. Packaging and marking must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be correctly labeled according to this standard. The unit of issue is a package containing 40 drapes, and the National Stock Number is 6530-01-151-1831. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within five days of award, and any non-accepted supplies must have government identification removed as per regulation. The contract was issued under solicitation SPE2DH-26-T-5888 with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5862
Surgical drapes described are nonwoven, disposable, and sterile, measuring 18 x 26 inches, intended for use in minor surgical procedures and individually sealed. Each package contains 300 units, and the contract specifies a shelf life of 60 months with no more than nine months having elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA Packaging Requirements for Procurement, and technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies per RQ011. The item is identified by NSN 6530-01-169-7491 with a quantity of two packages, and delivery is required within 20 days of order award. The solicitation number is SPE2DH-26-T-5862, issued on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 423450. Performance is to be delivered to Fort Stewart, Georgia, with Tina Vu of the Department of Defense’s Medical Supply Chain FSH listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
DISPOSAL CONTAINER, HYP
Solicitation # SPE2DH-26-T-5863
The contract specifies the procurement of a disposal container designed for used hypodermic needles and syringes, identified by NSN 6530-01-188-5345 and manufacturer part number 305488 from Becton, Dickinson and Co. Each unit has a nominal capacity of 3.3 quarts, is constructed of puncture-resistant plastic, and features a one-way valve, venting, autoclavability, and a red color with clear infectious waste symbols and caution legends. Packaging must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and each unit must be sealed in a protective container that prevents damage during transit. Shipping must use commercial exterior containers suitable for safe delivery via common carrier at the lowest cost, with delivery required FOB destination within 20 days. The item is regulated by the FDA and requires a referral to a product specialist via EBS prior to award, including bidder and manufacturer details. The unit of issue is PG, where one PG equals 24 units, and the order quantity is one PG. All packaging and marking adhere to MIL-STD-2073-1E, and the contract includes DLA packaging requirements and technical quality specifications referenced from the DLA Master List. Covered defense information may apply, and the solicitation number is SPE2DH-26-T-5863 with a response deadline of August 17, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
Federal
X-Ray Tube and Detector Component SupplyThe contract requires the supply of unlimited x-ray tubes and detector components specifically for the Philips Azurion 7 M20 Cath Lab, ensuring continuous operational readiness through rapid replacement of critical imaging parts. The provider must guarantee full warranty coverage for all delivered components, minimizing downtime and maintaining clinical performance standards in a high-volume medical environment. Delivery logistics must support immediate availability to meet urgent replacement needs at the designated performance location in Shreveport, Louisiana, with zip code 71101. This is a subcontract under the Department of Veterans Affairs, managed by the 256-NETWORK Contract Office 16, and is classified under NAICS code 423450 for medical equipment and supplies merchant wholesalers. The solicitation was posted on August 8, 2026, with a firm response deadline of August 14, 2026, at 3:00 PM. The agreement emphasizes reliable, scalable component supply without quantity restrictions, aligning with the mission-critical nature of the Cath Lab services provided to veteran patients, and requires the contractor to maintain compliance with all applicable regulatory and warranty obligations throughout the term of supply.
256-NETWORK Contract Office 16 (36C256)

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
International
Infrastructure - Request for Quotes - Supply of Wheelchairs and Accessories for AADL
Solicitation # AB-2026-05031
The Government of Canada, through Infrastructure, is seeking to establish a pre-qualified vendor list for the supply of wheelchairs and related accessories, including batteries for the Assisted Adaptive Device Program. This solicitation, identified as AB-2026-05031, is open to vendors capable of meeting the technical and logistical requirements for delivering compliant mobility equipment across Alberta. The request is ongoing with responses accepted until June 30, 2028, allowing interested suppliers an extended window to submit quotations and demonstrate their ability to fulfill ongoing and future procurement needs. Vendor pre-qualification will be based on factors such as product compliance, delivery reliability, service support, and adherence to provincial guidelines for assistive devices. All submissions must be directed to the designated Contracting Authority, Josephine Youdeowei, via the provided email address, and performance of any resulting contracts will occur within Alberta. The initiative is classified under federal procurement processes, though no specific NAICS code or set-aside designation is listed. The solicitation is published on CanadaBuys, and potential vendors are encouraged to review the official notice on the provided digital link for full specifications, evaluation criteria, and submission protocols to ensure alignment with procurement expectations and standards.
Infrastructure

POSTED

1 day ago

DEADLINE

in almost 2 years
View Details
NAICS: 423450
New
SLED
Polk - Scott Air-Paks
Solicitation # PE-30125-NONST-2027-000000025
Polk County Government is seeking qualified contractors to submit sealed bids for the purchase of 30 Scott Air-Pak X3 Pros and 30 Scott AV 3000 HT size medium masks, with cylinders explicitly excluded from this procurement. Bids must be submitted by 10:00 AM EST on Wednesday, September 16, 2026, to the Commissioners Office at 216 Main Street in Cedartown, Georgia. The contract will be awarded to the bidder whose proposal most fully meets the specified requirements and best advances the interests of the county. Proposal documents are available in person at the Polk County Administration Office or online at polkga.org, and interested parties are encouraged to request them promptly. The solicitation is identified by number PE-30125-NONST-2027-000000025 and was posted on August 7, 2026. All inquiries should be directed to Mike Hanuscin at mhanuscin@polkga.org, the designated point of contact for this procurement.
Polk County Board of Commissioners

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
HANDLE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-325V
The contract solicits a small pediatric laryngoscope handle made of chrome-over-brass, designed for use with a fiber optic laryngoscope blade and powered by a AA battery, with a unit of issue of one each. The item is identified by NSN 6515-01-396-4249 and is requested in a quantity of one unit for delivery within 20 days of award. The solicitation, numbered SPE2DS-26-T-325V, was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 339112 for medical equipment manufacturing. The purchasing agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required at Laughlin AFB, Texas, and the primary point of contact is Michael Small. Bidders must specify the source and part number being offered and are required to comply with all referenced technical and quality specifications from the DLA Master List, packaging standards, and procedures for removing government identification from non-accepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CATHETER AND NEEDLE UN
Solicitation # SPE2DS-26-T-324C
The contract specifies the procurement of a sterile disposable intravenous catheter and needle unit in 18 gauge size with a 1.25 inch length, identified by NSN 6515-01-718-5456 and packaged in boxes of fifty. The product must meet stringent shelf-life requirements, including a non-extendable 36-month shelf life from the date of manufacturer, with no more than five months elapsed between the manufacture date and delivery to the government. All packaging and labeling must comply with the latest revision of MMS1A, clearly displaying the date of manufacture, expiration or retest date, and the contract and lot number. The item is classified as a TYPE I (CODE Q) item under RS020 and must adhere to DLA packaging standards and other technical and quality requirements referenced in the DLA Master List. The contract requires bidders to clearly identify the source and part number being supplied and mandates removal of government identification from non-accepted supplies. Delivery is required within five days of award, with the place of performance specified as Fort Lewis, Washington. The solicitation was issued on August 9, 2026, with responses due by August 17, 2026, under contract number SPE2DS-26-T-324C, managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
DEFIBRILLATOR TEST, DIS
Solicitation # SPE2DS-26-T-323X
The contract pertains to the procurement of a defibrillator test and discharge resistor with two leads, specifically designed for discharging capacitors in the defibrillation circuit of the ZOLL PROPAQ MD device, used exclusively for troubleshooting purposes. The item is issued individually, with a single unit required under the NSN 6515-01-691-7585, and must be delivered within 20 days of award. Bidders are required to clearly state the source and part number being supplied to ensure compatibility and compliance with technical specifications. The solicitation, identified as SPE2DS-26-T-323X, is issued by the Department of Defense under the Medical Supply Chain MD Surg Fsf, with performance to occur at Scott AFB, Illinois. It incorporates technical and quality requirements referenced in the DLA Master List, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must meet DLA standards, and government identification must be removed from rejected supplies. Covered defense information may apply, and all responses must be submitted by the deadline of August 17, 2026. Point of contact for inquiries is Brooke Webb, reachable via email or phone.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
PAD, ABDOMINAL
Solicitation # SPE2DS-26-T-325A
The product is an abdominal pad composed of multiple layers including absorbent fibers backed by a nonabsorbent fiber layer, covered with gauze or nonwoven fabric, with an alternative construction using cellulose wadding backed by nonabsorbent cotton and similarly covered. Each unit is packaged in a case of 144 pads and must maintain a shelf life of 36 months from manufacture, with no more than six months elapsed between manufacture and delivery to the government. All containers must be clearly marked with the lot or control number and the date of manufacture, prefixed with MFD. The item is identified by NSN 6510-01-271-7671 with a purchase quantity of six cases and a delivery requirement of 63 days after order award. The solicitation number is SPE2DS-26-T-325A, issued on August 9, 2026, with proposals due by August 17, 2026, under NAICS code 339112 for medical device manufacturing. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at APO ZIP 96260-5479 and primary point of contact Anh Lam via email and phone. The procurement follows DLA packaging requirements and incorporates technical and quality standards listed in the DLA Master List, with applicable revisions governed by the solicitation or amendment date. Government identification must be removed from any nonaccepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTURE
Solicitation # SPE2DS-26-T-323F
The contract is for the procurement of acupuncture needles specified as silver plated spiral wound handle, 0.35mm diameter by 75mm length, manufactured from sterile, disposable stainless steel and identified by the NSN 6515-01-673-6604, with a unit of issue of one box containing 100 needles. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, which must be reviewed in its version effective on the solicitation issue date or award date, depending on the acquisition type. Packaging must comply with DLA packaging standards, and government identification must be removed from any supplies not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-323F, was posted on August 9, 2026, with a response deadline of August 17, 2026, and is categorized under NAICS code 339112 for medical equipment manufacturing. It is a federal procurement under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with performance delivery set for Hampton, Virginia, 23665-2040. The single purchase request calls for one box, with delivery required within 20 days of award. Primary point of contact is Dorothy Marquis at the provided email and phone number, and all bids must be submitted through the DIBBS portal prior to the deadline. Covered defense information may apply, and compliance with all applicable technical, quality, and packaging provisions is mandatory for acceptance.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIA, SALMONEL
Solicitation # SPE2DS-26-T-322Z
This contract pertains to the procurement of Culture Media, specifically Salmonella Shigella Agar and Xylose Lysine Deoxycholate Agar, identified by NSN 6550-01-358-3835 and manufacturer part number R02140 from REMEL INC. The items are classified as Type I (Code A) with a strict non-extendable shelf-life of one month and require refrigeration between 2 and 8 degrees Celsius throughout storage and transport. The product is regulated by the FDA and must be supplied with full disclosure of the source and part number. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and all units must be sealed in commercial containers designed to prevent damage, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Delivery is required FOB destination within 20 days, and the packaging must adhere to MIL-STD-2073-1E standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract falls under a federal solicitation with NAICS code 621410 managed by the Department of Defense’s Medical Supply Chain. Covered Defense Information may apply, and bidder information must be submitted to the product specialist via EBS for FDA confirmation prior to award.
Family Planning Centers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, M
Solicitation # SPE2DS-26-T-324M
The contract calls for the procurement of two rigid sea-air medical evacuation litters, designated by NSN 6530-01-187-0104, with a delivery requirement within 20 days after award. Each litter measures 80 inches in length and 16.5 inches in width, constructed with a stainless steel or corrosion-resistant metal frame and a special cloth stretcher, designed to be folded in half, hoisted vertically or horizontally, backpacked, and carried without hands, enabling transport into confined spaces. The litters must be orange in color and include a urethane-coated carrying case. Mercury or mercury-containing compounds are strictly prohibited unless used in functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Bidders are required to provide the source and part number of the litters being offered. The solicitation, issued under SPE2DS-26-T-324M with a response deadline of August 17, 2026, is managed by the Department of Defense’s Medical Supply Chain, with the place of performance in Jacksonville and primary point of contact Lisa Thomas-Wright.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
CONNECTOR, SURGICAL
Solicitation # SPE2DS-26-T-325F
The contract pertains to the procurement of a surgical connector made from corrosion-resistant metal, specifically a Diamond O2 quick connector with a DISE male fitting and check valve, designed for use with oxygen tubing. Each unit is sold individually, with a total order quantity of ten units identified by the NSN 6515-01-457-0271 and required for delivery within five days of award. The item falls under the NAICS code 334510 and is part of a federal solicitation issued by the Department of Defense’s Medical Supply Chain, with performance located in San Antonio, Texas. All units must be packaged in sealed commercial containers that protect against damage and meet the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Shipping containers must ensure safe delivery via common carrier at the lowest feasible rate, and all packaging must comply with DLA packaging requirements. The product is subject to Defense Information that may be controlled, and technical and quality compliance standards referenced as R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to specify the source and part number being offered, and the solicitation’s response deadline is August 17, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327992
New
DIBBS
DENTAL KIT, EMERGENCY
Solicitation # SPE2DS-26-T-325D
The DENTAL KIT, EMERGENCY is a standardized medical supply containing a dental exam mirror, dental stick, toothbrush, toothpaste, dental floss, cotton-tipped applicators, oil of cloves, temporary cavity filling material, aspirin, and a gauze pad, all packaged as a single unit for immediate use. The kit must be delivered to the government within two months of manufacture and is subject to strict shelf-life requirements as a TYPE I (CODE H) item with a non-extendable 12-month shelf life. The product is regulated by the FDA, and bidders must provide the manufacturer name, part number, and source details, with the specified part number being 700014 from MYHRE'S EXPLORATION PRODUCTS, INC. All packaging must comply with commercial standards and MIL-STD-2073-1E, and items must be marked in accordance with Medical Marking Standard No. 1, ensuring protection from damage and safe transport via common carrier to the delivery point at Travis Air Force Base, California. The unit of issue is each (EA), with a contract quantity of one unit, delivery due within 20 days FOB destination, and no variance allowed in quantity. The solicitation falls under NAICS code 327992 and is governed by DLA technical and quality requirements referenced in the DLA Master List, with the contracting official required to submit an FDA referral through EBS including all manufacturer and bidder details.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, COMPRESSION, T
Solicitation # SPE2DS-26-T-323C
This item is a sterile, flat-fold compression dressing designed for one-handed use in emergency trauma situations involving arterial bleeding and severe hemorrhaging in limbs. It features a 4-inch wide by 60-inch long elastic bandage and an 8-inch wide by 10-inch long absorbent pad, all packaged in a compact 4-inch by 6-inch by 0.6-inch unit weighing 3.6 ounces. The dressing meets TAA compliance standards and is intended for immediate, effective application under any condition to control life-threatening bleeding. Each unit is individually wrapped and must have a minimum 60-month shelf life, with no more than nine months elapsed between the manufacturer’s production date and the delivery date to the government. The item is identified by NSN 6510-01-598-8418 and is being procured in quantities of 20 units under solicitation SPE2DS-26-T-323C, with a delivery deadline of 20 days after award. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain division, with performance occurring at Fort Drum, New York. Technical and packaging requirements are governed by DLA’s Master List, and government identification must be removed from any non-accepted supplies. The contract point of contact is Kendall Jones at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CEMENT, ORTHOPEDIC SURG
Solicitation # SPE2DS-26-T-325Z
The contract specifies the procurement of a radiopaque orthopedic surgical cement set, supplied as a unit of issue containing ten each of sterile powder and liquid monomer components. Each set includes a 40-gram sterile powder mixture of polymethyl methacrylate, methyl methacrylate styrene copolymer, and barium, along with a 20-milliliter sterile liquid monomer ampule. The product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and delivery to the government. All packaging must meet commercial standards, with each unit sealed in a protective container to prevent damage and shipped in suitable exterior containers optimized for safe, low-cost delivery to the specified point in Williamsburg, Virginia. Markings on all containers must include the lot or control number and date of manufacture preceded by “MFD” and conform to Medical Marking Standard No. 1, which replaces MIL-STD-129. The material is classified as hazardous, requiring compliance with 49 CFR and ICAO regulations for transport, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6515-01-153-5275, the solicitation number is SPE2DS-26-T-325Z, and delivery is required within five days after delivery order.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL KNIF
Solicitation # SPE2DS-26-T-324X
The contract specifies the procurement of 3 packages, each containing 10 detachable surgical knife blades, totaling 30 units, under NSN 6515-01-538-8302, with delivery required within 5 days FOB destination to Camp Pendleton, California. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding any general standards like ASTM D3951, and must adhere strictly to Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport by common carrier at the lowest cost. The blades must include a safety locking system for maximum protection during handling and use. Marking and labeling must follow MMS No. 1 guidelines, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The contract requires zero variance in quantity, with inspection and acceptance occurring at the destination. The solicitation number is SPE2DS-26-T-324X, with a response deadline of August 17, 2026, and the item is classified under NAICS code 339112 for surgical appliance and supply manufacturing. The delivery point is governed by government addresses provided, and the order is subject to covered defense information protocols.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details