Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CYLINDER, HYDRAULIC ACC

Active
SPE7LX-26-U-9870Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE7LX-26-U-9870, is a solicitation by the Department of Defense Strategic Acquisition Program Directorate for the procurement of 233 hydraulic accumulator cylinders. The items are identified by NSN 2590-01-453-7423 and part number BBD17366 from G.T. Machining & Fabricating Ltd. This is designated as a critical application item with a delivery requirement of 84 days after order. The agreement specifies that delivery is FOB Origin with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. All technical and quality standards are governed by the DLA Master List, which takes precedence over other packaging standards.

General Info

DoD seeks 233 hydraulic accumulator cylinders, NSN 2590-01-453-7423, delivered within 84 days.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE7LX-26-U-9870.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER,HYDRAULIC ACCUMULATOR
CYLINDER, HYDRAULIC ACCUMULATOR.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
G.T. MACHINING & FABRICATING LTD. 3AR59 P/N BBD17366
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000241135 0001 EA 233.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:2590014537423
DELIVERY (IN DAYS):0084
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE7LX-26-U-9870
SECTION B
PR: 1000241135 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9870 NSN/Part Number: 2590-01-453-7423 Quantity: 233 EA Purchase Request: 1000241135QTY: 233 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336992
New
DIBBS
SWEEP WIRE, STARBOAR
Solicitation # SPE7L5-26-T-5279
This solicitation, issued by the Department of Defense Land Supplier Opns Engines, is for the procurement of 24 units of starboard sweep wire under NSN 1075-01-028-2978. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside with a delivery requirement of 320 days after receipt of order. Performance is to take place in New Cumberland, Pennsylvania, and the response deadline for the solicitation is September 11, 2026. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and rigorous export controls. Because the item involves technical data governed by ITAR or EAR regulations, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to be eligible for data access. All technical data is restricted and cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336992
New
DIBBS
Supply of Transportation Equipment (NSN 2590013369937)This subcontract opportunity, issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, requires the procurement and delivery of transportation equipment identified by NSN 2590013369937. The selected provider must ensure the equipment meets all DLA technical specifications and adheres to domestic origin requirements. The project falls under NAICS code 336992. The contract is designated as a total small business set-aside in accordance with FAR 19.5. Interested parties must submit their responses by the deadline of September 14, 2026, following the posting date of August 30, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336992
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L3-26-U-0723
This contract is a solicitation for the procurement of 32 vehicular component brackets, identified as National Stock Number 2590013369937 and Daimler Truck North America part number 22-62169-001. The item is classified as a commercial off the shelf product. The agreement specifies a delivery timeframe of 85 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The procurement is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency and is designated as a total small business set-aside. Compliance is required for DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Technical and quality requirements are governed by the DLA Master List, and the contract mandates the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336992
New
DIBBS
PLATE, FLOOR
Solicitation # SPE7L4-26-T-6658
Solicitation SPE7L4-26-T-6658 is a federal request for quotation issued by the Department of Defense, specifically the DLA Land and Maritime LSO Combat Vehicles and Armament, for the procurement of one floor plate identified by NSN 1005-01-113-1456. The contract requires delivery within five days after receipt of order to Fort Hood, Texas. Quotes are due by September 10, 2026, and the procurement falls under NAICS code 336992. This acquisition is subject to stringent technical and quality requirements, including compliance with the DLA Master List, specific packaging standards, and higher level quality requirements for manufacturers. The contract includes critical security and legal mandates, such as CMMC Level 2 self-assessment and third-party assessment requirements, as well as strict export controls under ITAR and EAR regulations. Additionally, the contract specifies requirements for demilitarization of small arms weapons parts and mandates that technical data only be distributed to approved contractors with US/Canada Joint Certification Program certification. Inspection and acceptance are to occur at the origin, and the item may involve components from Qualified Products Lists or Qualified Manufacturers Lists.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336992
New
Federal
LENCO BEARCATThe US Marshals Service within the Department of Justice is forecasting a requirement for the Lenco Bearcat BC55003-Base, including various accessories and upgrades. This procurement is categorized under NAICS code 336992 and is designated as a Small Business Total Set-aside. The place of performance for this contract is located in Pineville, Louisiana. Interested parties can coordinate with Christopher Jones or Small Business Specialist Shandora Acrey regarding this opportunity, which was posted on August 30, 2026.
US Marshals Service

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336992
New
Federal
LIPTM00055, AR IPT - Fielding and Production Support of LAV LCS (C)The Naval Information Warfare Systems Command, specifically Niwc Atlantic, is forecasting a requirement for systems engineering, technical, and management support services. The primary objective of this contract is to facilitate the procurement, production, integration, and fielding of Vehicle Integration Kits for the LAV LCS (C) program. This effort is categorized under NAICS code 336992 and is slated for performance in North Charleston. Jacqueline Luna serves as the primary point of contact for this acquisition, which focuses on providing comprehensive production and fielding support to ensure the successful deployment of the vehicle integration systems.
Niwc Atlantic

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336992
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M3-26-T-8268
Solicitation SPE7M3-26-T-8268 is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 592 tube elbows, identified by NSN 4730003504261. The items must be manufactured in accordance with basic drawing 19207 5222874, Revision C, and must utilize Class 3 threads. As this is a source controlled drawing, only approved sources cited on the drawing are eligible. The required delivery date is March 13, 2027, with a delivery lead time of 197 days after receipt of order. Shipping is FOB Origin, and the destination is the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is stringent, requiring destination inspection and acceptance. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with unspecified attributes treated as major. Packaging must comply with ASTM D3951 and RP001 DLA packaging requirements, while marking and labeling must adhere to MIL-STD-129. Additionally, the contract prohibits the use of Class I ozone depleting chemicals and requires compliance with the Berry Amendment and Buy American Act. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 336992
New
Federal
BOAST RFOP - Mount, Telescope - NSN: 1240-01-277-0473
Solicitation # PANDTA-25-P-0000_007619
The Army Contracting Command – Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track program for a Firm-Fixed-Price order of 22 telescope mounts, identified by NSN 1240-01-277-0473 and part number 12599175, with two optional 12-month periods each for an additional 20 units. This is a Total Small Business Set-Aside, exclusively open to vendors with an active, fully executed BOAST Basic Ordering Agreement in place by the proposal deadline of August 17, 2026. The contract vehicle requires compliance with export control regulations, as the item involves controlled technical data; vendors must be certified in the Joint Certification Program to access the required documentation, with non-certified parties required to submit DD Form 2345 to the designated U.S./Canada Joint Certification Office. All solicitation details, amendments, and submission instructions are disseminated exclusively through SAM.gov, and participants are responsible for monitoring the posting regularly as no mailing list is maintained. The North American Industry Classification System code is 336992, and the delivery terms are FOB destination with inspection and acceptance based on origin. Proposals will be evaluated solely on price under a Lowest Price Technically Acceptable framework. Vendors without an existing BOAST agreement are encouraged to initiate the continuous on-ramp process but must have a fully executed agreement prior to the closing date to be eligible for award.
W6QK Acc- Dta

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336992
New
International
VR7 ARMOURED SPORTS UTILITY VEHICLES SUPPLY ARRANGEMENT
Solicitation # WS5076037717
The Government of Canada is soliciting proposals to establish Supply Arrangements for the procurement of armoured sport utility vehicles through solicitation WS5076037717, with a response deadline of October 14, 2030, and a contract term extending to October 16, 2030. The vehicles are intended for use across Canada and international destinations, but deliveries to areas within Yukon, Northwest Territories, Nunavut, Quebec, and Labrador that are subject to Comprehensive Land Claims Agreements are explicitly excluded and must be procured through separate processes. Only suppliers that meet the mandatory criteria outlined in the Request for Supply Arrangement will be eligible to become holders of the resulting Supply Arrangements. The North American Industry Classification System code for this procurement is 336992, and the responsible department is the Department of Public Works and Government Services under the Government of Canada. Interested parties must contact Stephanie Way, the Contracting Authority, to gain access to the Ariba link for submitting proposals. All tender details are publicly available via the Canada Buys platform.
Department of Public Works and Government Services

POSTED

4 days ago

DEADLINE

in about 4 years
View Details
NAICS: 336992
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-T-04P8
This contract is a solicitation from the Department of Defense Land Supply Chain for the procurement of 12 synthetic rubber cushioning pads, identified by NSN 2590-00-725-5271. The items must be delivered within 20 days after the order is placed. The procurement is open to full and open competition and adheres to specific DLA packaging and quality requirements, including inspection and acceptance at the origin. Key compliance mandates include a strict prohibition on the use of Class I ozone depleting chemicals and a non-extendable shelf-life requirement of 36 months. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specific training to access technical data.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
DIBBS
SWITCH, BEAM SELECTI
Solicitation # SPE7L1-26-T-04G5
This contract is for the procurement of one headlight beam selecting switch, identified by NSN 2590-01-178-4832 and Ford Motor Craft part number SW1663, intended for use on a 1981 Ford Motor Co Bobtail Truck. The order is managed by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-04G5. Delivery is required within five days after order, with the final destination and inspection point located at Andersen AFB in Guam. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies. All shipping must be coordinated to the provided freight address in Yigo, GU, with a required delivery date of August 27, 2026.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
ARMOR,SUPPLEMENTAL, — 1560016723515 — N0038326QBA53
Solicitation # NO00383-26-Q-BA53
The contract solicitation NSN 1R-1560-016723515-V2 requests seventeen units of supplemental armor with technical documentation version 001, under FOB origin delivery terms. Issued by the Naval Supply Systems Command Weapon Systems Support, the posting date is August 7, 2026, with proposals due by September 21, 2026, at 4:00 a.m. Eastern Time. This is a presolicitation notice and does not specify a set-aside type or NAICS code, indicating the opportunity is open to all qualified vendors without restriction. The performance location is unreleased, but the solicitation originates from the office in Philadelphia, Pennsylvania, with Grace Y. McGinley serving as the primary point of contact for inquiries through the provided email and phone number. The procurement is managed under the Department of Defense and the official solicitation can be accessed via the SAM.gov portal linked in the data.
Navsup Weapon Systems Support

POSTED

5 days ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9863
This contract is a solicitation for the procurement of plain seals, identified by NSN 5330-01-337-0848, with an estimated quantity of three kits. The requirement is designated as a critical application item and is set aside for total small businesses under NAICS code 339991. Delivery is required within 211 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including the prohibition of asbestos and the restriction of mercury unless specifically exempted for functional use. Due to the potential for ultraviolet ray deterioration, the items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additional compliance is required for military property identification marking under MIL-STD-130N and general DLA packaging and hazardous materials shipping standards.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
ANALYZER-CHARGER, BATTE
Solicitation # SPE7LX-26-T-1030
This contract is for the procurement of five battery analyzer-chargers, identified by NSN 6130017358784, under solicitation SPE7LX-26-T-1030. The items are associated with Havis Inc part numbers 24002678 and SPE0218. Delivery is required within 127 days, with a final required delivery date of June 13, 2027, shipping FOB Origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-defect acceptance policy for sample lots. The contract also specifies the removal of government identification from non-accepted supplies and notes that covered defense information potentially applies to this acquisition.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7LX-26-U-9864
This contract is for the procurement of four groove pulleys under solicitation number SPE7LX-26-U-9864, issued by the Department of Defense Strategic Acquisition Program Directorate. The items are identified by NSN 3020-01-646-9460 and correspond to Lake Shore Systems, Inc. part numbers F160216 and F177878. Delivery is required within 73 days, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement standards. The quantity is an estimate and is subject to a zero percent variance.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, BOW
Solicitation # SPE7LX-26-T-1031
This contract, identified as SPE7LX-26-T-1031, is a solicitation for the procurement of 30 bow handles under NSN 5340-01-728-1762. The order is managed by the Department of Defense Strategic Acquisition Program Directorate and specifies a delivery timeframe of 55 days after the order is received, with an original required delivery date of January 30, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as MIL-STD-129 and RP001. It explicitly prohibits the use of Class I ozone-depleting chemicals in the production of the items. Additionally, the contract requires the removal of government identification from any non-accepted supplies and notes that covered defense information requirements may apply.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9865
This contract is a solicitation for the procurement of gaskets under solicitation number SPE7LX-26-U-9865, issued by the Department of Defense Strategic Acquisition Program Directorate. The requirement is for an estimated quantity of 239 units of NSN 5330-01-523-9780, with a delivery timeframe of 52 days after receipt of order. The contract is designated as a Women-Owned Small Business Set-Aside and specifies delivery as FOB Origin with inspection and acceptance occurring at the destination. The agreement includes strict technical and environmental mandates, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Due to the potential for ultraviolet ray deterioration, the items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking is mandatory. The contract identifies several approved part numbers and vendors, including Caterpillar Inc. and Finning UK Ltd.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336211
New
DIBBS
DOOR, VEHICULAR
Solicitation # SPE7LX-26-U-9868
This solicitation from the Department of Defense Strategic Acquisition Program Directorate is for the procurement of 47 units of a right rear fixed vehicular door, identified by NSN 2510-01-464-6660. The contract requires delivery within 136 days after receipt of order. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a C3PAO. Additionally, the item is subject to strict export controls under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completion of specific DLA export-control training and questionnaires.
Motor Vehicle Body Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7LX-26-U-9862
This contract, identified as SPE7LX-26-U-9862, is a solicitation for the procurement of 18 packing retainers, part number 002-60227-02, with NSN 5330-01-431-5190. The items are designated as critical application items and must be delivered FOB Origin within 187 days. The contract specifies that the items must be free of asbestos and that mercury or mercury-containing compounds shall not be intentionally added, except for specific functional exceptions. Strict packaging and marking requirements are mandated to prevent deterioration from ultraviolet rays, requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. All shipping and palletization must adhere to DLA packaging requirements and MIL-STD-129 for marking. Inspection and acceptance will take place at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332994
New
DIBBS
PLATFORM, DROP LEG
Solicitation # SPE7LX-26-U-9856
This contract, identified as solicitation SPE7LX-26-U-9858, is for the procurement of 61 units of Drop Leg Platforms, specifically part number 6004UFA-SP1-55-MS22 from Safariland LLC. The order is issued by the Department of Defense Strategic Acquisition Program Directorate and is designated as a Total Small Business Set-Aside under NAICS code 332994. Delivery is required within 153 days, with the shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. Key compliance obligations include the removal of government identification from non-accepted supplies and the maintenance of supply chain traceability documentation. The contract also notes that covered defense information may potentially apply to this procurement.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335910
New
DIBBS
RETAINER, BATTERY
Solicitation # SPE7LX-26-U-9858
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 761 battery retainers under National Stock Number 6160-00-009-4016. The contract is designated as a total small business set-aside under NAICS code 335910, with a required delivery timeline of 109 days after receipt of order. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-controlled technical data training and questionnaires. All items must also adhere to DLA packaging requirements for procurement.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9867
This contract is for the procurement of 173 units of hand cranks, identified by NSN 5340-01-623-7876 and part number 1103-1945-01 from MCT Industries, Inc. The solicitation, numbered SPE7LX-26-U-9867, is issued by the Department of Defense under the Strategic Acquisition Program Directorate. Delivery is required within 76 days, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Depending on the hazardous material status per FED-STD-313, packaging must follow either TQ requirement IP025 or ASTM D3951. The contract also incorporates various technical and quality requirements from the DLA Master List and specifies that government identification must be removed from any non-accepted supplies.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7LX-26-U-9859
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 79 helical compression springs under part number 5360-01-108-5187. The contract requires delivery within 74 days after receipt of order. It is categorized under NAICS code 332611 and is managed by the Defense Logistics Agency. The agreement mandates strict adherence to several technical and quality requirements, including source approval request documentation, DLA packaging standards, and the retention of supply chain traceability documentation. Additionally, the supplier must ensure that items are free of asbestos and do not contain class I ozone depleting chemicals. All government identification must be removed from any non-accepted supplies.
Spring Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
ARMREST, AIRCRAFT
Solicitation # SPE7LX-26-U-9873
This contract is for the procurement of 14 aircraft armrests, identified by NSN 1680016059279 and BAE Systems part number 110350-3. The delivery is required within 185 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item is designated as a critical application item, and the contract specifies a zero percent quantity variance. Compliance requirements include adherence to DLA packaging standards, MIL-STD-129 marking, and ASTM D3951 packaging. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the provider must comply with Covered Defense Information regulations and a CMMC Level 2 self-assessment. Item Unique Identification is not required for this specific request.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details