This Solicitation opportunity from Ohio was posted on January 21, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

D22 - Mechanical Shear Machines

Closed

SRC0000027511State & Local

Submission Closed02/07/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336390

New

Federal

25--LOCK,BLADE,VEHICULAR

Solicitation # SPE7L127T2905

POSTED

DEADLINE

25--SPINDLE,WHEEL,DRIVI, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPC02

Navsup Weapon Systems Support Philadelphia is soliciting quotations for the teardown, evaluation, repair, and modification of ten drive wheel spindles, identified by NSN 2530-12-391-6447 and Part Number 116810. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to restore these assets to a Ready For Issue condition in accordance with the latest technical publications. The work will be performed at the contractor's facility, with Goldhofer Airport Technology identified as the source of repair. The contract includes a 12-month warranty on supplies of a noncomplex nature and requires the contractor to maintain a quality management system compliant with ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1 standards. Key performance requirements include a Repair Turnaround Time of 90 days after the receipt of an asset, with an induction expiration date set at 365 days after the contract award. The government will evaluate offers based on a single award to the most advantageous offeror, prioritizing past performance over price. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129 for marking, with specific requirements for Depot Level Repairable labels. Invoicing and payment will be processed electronically through the Wide Area Workflow system. The solicitation is open for responses until September 14, 2026, and incorporates various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including Buy American and cybersecurity requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Manufacturing of Vehicular Component Covers (NSN 2590016295579)This subcontract involves the manufacture and supply of three vehicular component covers under NSN 2590016295579 for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is required to fabricate the parts in strict accordance with Reference Drawing NR 19207 13013633, dated December 21, 2009, with a specific prohibition against the use of additive manufacturing. The project falls under NAICS code 336390 and requires all packaging to comply with ASTM D3951 standards. Performance for this contract is located in Tracy, California, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Steering Tie Rod End SupplierThis subcontract involves the supply of four steering tie rod ends, specifically part NSN 2530-01-187-7299, for prime contractors supporting DLA Weapons Support Land Supply Chain contracts. The components must be manufactured or sourced using precision machining and automotive grade steel, with performance taking place in Fort Hood. The supplier is required to maintain strict adherence to the Buy American and Balance of Payments Program. Additionally, the contract mandates full compliance with DFARS 252.204-7012 and DFARS 252.223-7008, specifically regarding the regulation of hexavalent chromium. Responses for this requirement are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture and Supply of Control Pedals (NSN 2540-01-681-4147)This subcontract, issued by the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament, requires the manufacture and supply of three finished Control Pedals under NSN 2540-01-681-4147. The selected provider must utilize precision machining or additive manufacturing to fabricate the assemblies, ensuring all quality inspections adhere to SAE AS9003 or ISO 9001 standards. Packaging must be completed in accordance with MIL-STD-129 and ASTM D3951 specifications. The opportunity is a total small business set-aside under NAICS code 336390, with performance located in New Cumberland. Due to the nature of the defense equipment, the contractor must maintain strict compliance with ITAR, EAR, and CMMC Level 2 requirements. Responses are due by November 9, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture and Supply of Brake Wedge AssembliesThis subcontract involves the manufacture and supply of 116 Brake Wedge Assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The assemblies must be fabricated according to NSN 2530-01-522-3503 and Meritor P/N A 2247X1220 specifications, with performance taking place in Tracy, California. The contractor is required to adhere to RA001 quality standards and MIL-STD-129 labeling requirements. Packaging must comply with ASTM D3951 for non-hazardous items or IP025 and 29 CFR 1910.1200 for hazardous materials. The final deliverable consists of completed and packaged assemblies delivered by the specified deadline.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Tetrafluoroethylene (Teflon) Hydraulic Hose Assembly ManufacturingThis subcontract involves the manufacture and supply of six high-pressure, high-temperature nonmetallic hydraulic hose assemblies for the DLA Weapons Support Land Supply Chain. The assemblies must be fabricated with a 0.852 inch inner diameter and a 1.250 inch outer diameter in accordance with SAE AS1339K Revision K, with a performance rating of 3000 PSI at 400 degrees Fahrenheit. The contractor is required to maintain QPL/QML listing and ensure full compliance with ASTM D3951 and MIL-STD-129 standards. The final deliverables, identified by NSN 4720-01-459-1029, are to be provided to prime contractors with performance taking place in Tracy, California.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Exhaust Manifolds (P/N 73530F93)This subcontract, managed by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the supply of two specialized exhaust manifolds, part number 73530F93 and NSN 2815-15-068-5586. The components must be sourced from either Fincantieri Marine Systems North or Isotta Fraschini Motori SPA to support prime contractors fulfilling DLA supply contracts. Performance for this requirement is located in New Cumberland, Pennsylvania. The contractor must ensure strict adherence to military standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, while complying with NAVSEA 5100-003D regarding mercury compounds. All delivered manifolds must be accompanied by comprehensive material certifications and process operation sheets. The response deadline for this opportunity is November 6, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Vehicular Operation Panels (NSN 2510015195167)This subcontract involves the manufacture or sourcing of 15 vehicular operation panels, identified by NSN 2510015195167, to support prime contractors for the Department of Defense DLA Weapons Support Land Supplier Operations. The contractor must ensure all units meet strict technical specifications and are packaged according to ASTM D3951 standards. Performance of the contract will take place in Albany, Georgia, under NAICS code 336390. The agreement is divided across two CLINs and mandates strict adherence to NIST SP 800-171 for cybersecurity compliance. Interested parties must respond by November 9, 2026, to fulfill the requirements of this defense supply effort.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Steering Drag Link (NSN 2530-01-714-1430)This subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, requires the provision of one Steering Drag Link under NSN 2530-01-714-1430. The part must be manufactured or sourced in strict accordance with Basic Drawing NR 53711 8614070, Revision NR A dated May 1, 2019. Due to the precise tolerances required, the contractor must utilize precision machining equipment and maintain an active SAM registration to be eligible. The project falls under NAICS code 336390 and is designated for performance in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by November 9, 2026, to fulfill the requirement for prime contractors working on Department of Defense projects.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Vehicular Mirror Heads (NSN 2540015779760)This subcontract, issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, requires the manufacture or sourcing of 45 vehicular mirror heads identified by NSN 2540015779760. The selected supplier will provide these units to prime contractors, ensuring all items are packaged and marked in accordance with MIL-STD-129, RP001, and ASTM D3951 standards. Delivery is specified as FOB Origin. The contract is a total small business set-aside under NAICS code 336390. Compliance requirements include adherence to the Buy American Act, DFARS cybersecurity reporting protocols, and strict prohibitions against the use of Class I ozone-depleting chemicals and Hexavalent Chromium. Interested parties must respond by November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Bumper Fabrication and SupplyThis subcontract involves the fabrication and supply of four bumpers for prime contractors supporting the DLA Weapons Support Land Supply Chain. The deliverables must strictly adhere to NSN 5340014547279 specifications and the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336390. The contractor is required to maintain compliance with the Buy American Act and the Berry Amendment to ensure domestic sourcing of materials. Additionally, the provider must meet NIST SP 800-171 cybersecurity standards. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 12 days

AI Contract Overview

The Ohio Department of Transportation aims to enhance its manufacturing and maintenance capabilities through the acquisition of two mechanical shear machines under a one-time purchase contract. The contract specifies the procurement of the Wysong Model 1052 and Model 1010 squaring shear machines, which are pivotal for ODOT's operational tasks. The Wysong Model 1052 is equipped with a PC800 touch screen control, boasts cutting capacities of 10-gauge and 12-gauge for stainless material, and is powered by a 10 horsepower motor allowing for a stroke rate of 60 per minute. It features an automatic oiler, LED lighting, and has provisions for hold-down feet and back gauges, emphasizing ease of use and maintenance. Similarly, the Wysong Model 1010 shares these features but offers an extended cutting length of 120 inches and a larger number of hold-down feet, making it suited for varied operational requirements. Expected delivery for the shear machines is slated for September/October 2025, with the selected vendor obligated to deliver these machines to ODOT’s Sign Shop at 1606 W. Broad Street, Columbus, Ohio. The vendor must be amenable to accepting purchase orders throughout the contract period. This procurement, valued between $50,000 and $150,000, underscores ODOT's commitment to upgrading its technical infrastructure with specialized equipment integral to its duties. Such investments are aligned with the department's strategic objectives to maintain and enhance transportation-related services across Ohio, ensuring that its operational hubs are well-equipped to meet future demands.

General Info

Ohio DOT contracts for two Wysong shear machines to enhance manufacturing capabilities, valued $50,000-$150,000.

Agency

Ohio Department of Transportation

NAICS

336390 - Other Motor Vehicle Parts Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Documents

Purchasing Standard Terms and Conditions - 01-2025

19 pages · terms-and-conditions

High

Wysong Mechanical Shear Machines Specifications for Ohio DOT Purchase

specifications

High

Affirmation and Disclosure Form 5-24

2 pages · affirmation-and-disclosure-form

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJan 21

Solicitation

Response DeadlineFeb 7

Deadline has passed

Submission Closed

02/07/2025, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyOhio Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyOhio Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Item 1: Wysong 1052 squaring shear machineOne-year parts and complex labor warrantyPC800 Touch screen controlCutting capacity: 10 gaugeStainless capacity: 12 gaugeHorsepower: 10Strokes per minute: 60Cutting Length 52”Rake angle of top blade(in/ft): 3/8”Hold-down feet : 0824-inch back gaugeNumber of T slot in top of bed: 2Bed height: 33”Lubrication: Automatic oilerFloor space with gauges: 87” x 99”Overall, Height 60”Front bed extension: 2LED lightRubber inserts on H/D feet48” square armAdjustable channel for hold - down feetDesignMechanical powered, under driven, low profile squaring shearMachined and bolted constructionOne-piece, high tensile, ductile castingsTransmission:60 cuts per minute at maximum capacityV-belt drive for overload protectionTotally enclosed, vented transmission with oil bath lubricationFilled reservoir, Mobil #636 gear lubrication or equivalentTop center indicatorOil level sight gaugeMagnetic oil drain plugContinuous running, straddle mounted, spur gear drive for random tooth selectionHeat-treated nine jaw clutchesHeat-treated adjustable clutch release camCam operated spring set intermittent style brakeAir filter and regulatorMetal flywheel and brake guardsBlades:Four edge, high carbon, high chrome bladesElectrical:Shear electrical controls with fused disconnect, locked in the “Off” position only, low voltage --control circuit in NEMA 12 enclosureElectro-pneumatic clutch controlRemote foot switch1800 RPM, 3 phases, 60 Hz, 460/575 motorCNC Control: 6-axis capability for programmable control of back gauge Operates under Windows 10 Pro and is network ready at installation 15’1” LCD touch screen Unlimited seats of offline programming software PC800 Control Hardware LCD touch-screen display Form factor – mini ITX motherboard Solid State Hard Drive LAN support – High speed Gigabit Ethernet connection Multiple USB ports Software - Licensed copy Windows 10 with each system Shear Wizard © Graphical software Advanced diagnostics and tuning software CNC Back Gauge +/- .002” positioning accuracy; +/- .001 reliability Planed back gauge stop with tension adjustments Steel rail Ball nut and rolled thread screw Linear guide rail& bearing Servo Motor Bearing Supports, Fixed and FloatingFrame:High tensile, ductile frame construction Adjustable, non-metallic gibing system Clearance holes and anchor bolts Jack screws for leveling and set up only Low fixed rake angle, running from right to left Ram is fully contained in oversized non-metallic system throughout stroke length Bed: Fabricated Fabricated Table with reinforcing ribs Fully machined top bed surface Full-width T-slot, left to right on bed front Cored pocket covers in bed top for lower blade bolt access and flush bed surface Hardened and ground side gaugesRam: Fabricated Fabricated Ram construction with Triangular Reinforcing Ribs 8-point Blade adjustment Low ½-degree ram incline from vertical path for true and burr free edge Low fixed rake angle, running from right to leftRam is fully contained in oversized non-metallic system throughout stroke length Item 2: Wysong 1010 Squaring Shear machineOne-year parts and complex labor warrantyPC800 Touch Screen ControlCutting Capacity: 10-gaugeStainless Capacity: 12 gaugeHorsepower: 10Strokes per Minute: 60Cutting Length: 120”Rake Angle of Top Blade (in/ft): 3/8”Hold-down feet: 16No T-Slots in Top of Bed: 4Bed Height: 33”Lubrication: Automatic oilerFloor Space with Gauges (Inches): 90” x 168”Overall, Height: 60”Front-bed extensions (Qty 2)LED lightAdjustable channel for hold down feet48” Back Gauge Automatic oiler for shearRubber Insert on H/DFeet72” Square Arm Design:Mechanical powered, under driven, low profile squaring shearMachined and bolted constructionOne-piece, high tensile, ductile castingsTransmission:60 cuts per minute at maximum capacityV-belt drive for overload protectionTotally enclosed, vented transmission with oil bath lubricationFilled reservoir, Mobil #636 gear lubrication or equivalentTop center indicatorOil level sight gaugeMagnetic oil drain plugContinuous running, straddle mounted, spur gear drive for random tooth selectionHeat-treated nine jaw clutchesHeat-treated adjustable clutch release cam Cam operated spring set intermittent style brakeAir filter and regulatorMetal flywheel and brake guardsBlades:Four edge, high carbon, high chrome bladesElectrical:Shear electrical controls with fused disconnect, locked in the “Off” position only, low voltagecontrol circuit in NEMA 12 enclosureElectro-pneumatic clutch controlRemote foot switch1800 RPM, 3 phases, 60 Hz, 460/575 motorCNC Control:6-axis capability for programmable control of back gauge, optional front and squaring arm gauges (Servo Motor)Operates under Windows 10 Pro and is network ready at installation15’1” LCD touch screenUnlimited seats of offline programming softwareControl Hardware:LCD touch-screen displayForm factor – mini ITX motherboardSolid State Hard DriveLAN support – High speed Gigabit Ethernet connectionMultiple USB portsSoftware - Licensed copy Windows 10 with each systemShear Wizard © Graphical softwareAdvanced diagnostics and tuning softwareCNC Back Gauge:+/- .002” positioning accuracy; +/- .001 reliabilityPlaned back gauge stop with tension adjustmentsSteel railBall nut and rolled thread screwLinear guide rail& bearingServo MotorBearing Supports, Fixed and FloatingFrame:High tensile, ductile frame constructionAdjustable, non-metallic gibing systemClearance holes and anchor boltsJack screws for leveling and set up onlyLow fixed rake angle, running from right to leftRam is fully contained in oversized non-metallic system throughout stroke lengthBed: FabricatedFabricated Table with reinforcing ribsFully machined top bed surfaceFull-width T-slot, left to right on bed frontCored pocket covers in bed top for lower blade bolt access and flush bed surfaceHardened and ground side gaugesRam: FabricatedFabricated Ram construction with Triangular Reinforcing Ribs8-point Blade adjustmentLow ½-degree ram incline from vertical path for true and burr free edgeLow fixed rake angle, running from right to leftRam is fully contained in oversized non-metallic system throughout stroke length