Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DECAL

Active
SPE8E6-26-T-4072Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single unit of a Type I shelf-life item identified by NSN 7690015956880 and part number 9720-925, with a mandatory non-extendable shelf life of 24 months as defined by RS001. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and no cushioning or dunnage, and marked in accordance with MIL-STD-129 with the special marking code 32 indicating Type I shelf-life status. Palletization must meet DLA’s Packaging Requirements and the delivery is FOB destination with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be delivered within five business days of contract award to the U.S. Naval Air Facility Atsugi in Japan, with an alternate parcel post address for U.S. military mail. The contract references applicable technical and quality standards from the DLA Master List and is governed by the revision in effect on the solicitation issue date. All transportation, freight handling, and shipment details adhere to DLAD Procurement Notes C19 and C20, and the supplier must ensure alignment with DLA’s authorized unit of issue and federal supply protocols. The contract was issued under solicitation SPE8E6-26-T-4072 by the Defense Logistics Agency, with a required delivery date of July 28, 2026, and a response deadline of August 17, 2026. The point of contact is Vincent Nader, and the place of performance is a military facility in FPO AP 96306-1204, though physical delivery occurs at the Japanese installation in Kanagawa Prefecture. The item is designated for government use only, and all marking, packaging, and logistical instructions must be followed precisely without deviation. The NAICS code 325998 applies to this unique defense-related supply item, and the supplier must comply with all federal procurement requirements for defense equipment, including handling of covered defense information as applicable.

General Info

Procure one Type I shelf-life item NSN 7690015956880, MIL-STD compliant, delivered FOB destination to Japan by July 28, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

PSC 477 BOX 4, FPO, AP, 96306-1204, US

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-4072.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
VINCENT NADER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DECAL
DECAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
AGE LOGISTICS CORPORATION 02708 P/N 9720-925
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017734257 0001 EA 1.000
NSN/MATERIAL:7690015956880
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
SPE8E6-26-T-4072
SECTION B
PR: 7017734257 PRLI: 0001 CONT’D
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N62507
US NAVAL AIR FACILITY ATSUGI
FISCY ATSUGI MATERIAL DIV
PSC 477 BOX 4
FPO AP 96306-1204
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N62507
U.S. NAVAL AIR FACILITY ATSUGI
FISCY ATSUGI, MATERIAL DIV
BLDG 934 OOHGAMI AYASE-SHI
KANAGAWA KEN 252 1101
JP
M/F: (TCN) N625076205D956
RDD: 777
PROJ: BK1 TP 1
SUPP ADD: YWC910 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A41 DIST: 9B ADV: FC: JE
Need Ship Date:00/00/0000 Original Required Delivery Date:07/28/2026
SPE8E6-26-T-4072 NSN/Part Number: 7690-01-595-6880 Quantity: 1 EA Purchase Request: 7017734257QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325998
New
DIBBS
BRUSH, PAINT
Solicitation # SPE8E7-26-T-3467
This contract specifies the procurement of 2,750 paint brushes of Type 2 Angular, Class 1 Bristle, Size 7, in accordance with Commercial Item Description A-A-3193 dated June 16, 2003, and is governed by technical and quality requirements from the DLA Master List of Technical and Quality Requirements. The brushes must be packaged and marked in compliance with MIL-STD-2073-1E and MIL-STD-129R, and palletization must meet DLA packaging requirements. The item is identified by NSN 8020-00-559-0439 and purchase request 7017758117, with a fixed unit price and total contract value based on the quantity ordered. Delivery is required FOB origin within 46 days of contract issuance, with inspection and acceptance occurring at the destination. No quantity variance is permitted. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a required ship date of October 3, 2026, and original delivery deadline of November 10, 2026. Marking must follow standard specifications without special codes, and all transportation logistics are governed by DLA procedural notes. The contract was issued under solicitation SPE8E7-26-T-3467 by the Department of Defense, with primary point of contact listed for inquiries.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
SOLDER, PASTE
Solicitation # SPE8E9-26-T-3373
The contract governs the procurement of solder paste with NSN 3439-01-415-2258, specifying it must conform to military specifications and be sourced from approved suppliers, primarily AUFHAUSER CORPORATION (CAGE 59401) and Turbo Braze Corporation (CAGE 1BJ08), with ASTM B32 explicitly not accepted as an equivalent. The product is classified as a TYPE 2 item with a six-month shelf life that is extendable, and all packaging, marking, and shipment must comply with MIL-STD-2073-1E and MIL-STD-129, including adherence to DLA packaging requirements and hazardous materials shipping protocols. Delivery is required within five days FOB origin with a ten percent quantity variance allowed, inspection and acceptance occur at the destination, and shipments must be sent via traceable freight methods, prohibiting parcel post. The unit of issue is pounds, with two separate line items each for one pound, delivered to different military addresses in Madison, Wisconsin, and Kirtland Air Force Base, New Mexico, with required delivery dates of August 3 and August 5, 2026, respectively. The solicitation references the DLA Master List of Technical and Quality Requirements and mandates compliance with all applicable defense and safety standards, including coverage under Covered Defense Information protocols.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
FLUX, SOLDERING
Solicitation # SPE8E9-26-T-3361
The contract is for FLUX, SOLDERING with NSN 3439-01-459-2000 and a quantity of 50 BT, issued under solicitation SPE8E9-26-T-3361 with a response deadline of August 17, 2026. The item is subject to DLA packaging requirements and incorporates technical and quality standards identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision tied to the solicitation issue date or award date depending on acquisition size. Hazardous materials regulations apply, requiring a current Material Safety Data Sheet (MSDS) to be submitted via the DLA MSDS email mailbox at DLA.MSDS@DLA.MIL along with the required cover sheet P-75, and a physical copy of the MSDS must accompany each shipment. Packaging must conform to applicable regulations including 49 CFR and ICAO Technical Instructions. The place of performance is Tracy, California, with a delivery requirement of 127 days ADO. The contract is managed by the Department of Defense under the Construction & Equipment MRO SVC I office, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
LABEL
Solicitation # SPE8E6-26-T-4020
The contract pertains to a labeling requirement under solicitation SPE8E6-26-T-4020, with a focus on handling technical data subject to strict export controls under ITAR or EAR regulations. Any access to or disclosure of this data, even to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce, and compliance with DFARS 252.225-7048. Contractors must hold an approved US/Canada Joint Certification Program certification, complete mandatory training on proper handling of DOD export-controlled technical data, and successfully pass the DLA Export-Controlled Technical Data Questionnaire to be granted access. The item, identified by NSN 7690-01-359-7375, has a quantity of 496 units and is subject to an 89-day delivery timeline. The solicitation is issued by the Defense Logistics Agency’s New Cumberland Facility under the Department of Defense, with Vincent Nader listed as the primary point of contact. The North American Industry Classification System code is 325998, and responses are due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
PUMPING UNIT, SEWAGE
Solicitation # SPE8E8-26-T-5044
The contract is for a single sewage pumping unit with NSN 4630-01-729-9276 and part number WHR7-23, supplied by either Myers F E Co Sub of Pentair Corp or King Pumps Inc, under solicitation SPE8E8-26-T-5044. Delivery is required within 167 days from the contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance to occur at the destination. The item must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling, and RP001 for palletization standards. Packaging must follow the specified Unit of Issue and Quantity per Unit Pack as defined in the contract, with all materials properly labeled and prepared for shipment to the designated DLA Distribution facility in New Cumberland, PA. The required delivery date was originally January 10, 2027, with a need ship date of February 1, 2027, and the contract falls under the federal procurement system with a NAICS code of 325998. The contract mandates full compliance with DLA’s technical, quality, and documentation standards, including the removal of government identification from rejected items and submission of source approval documentation as required by RC001. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the unit of issue is defined per the official DoD and ANSI X12 standards referenced in the contract. All supply data, delivery instructions, and packaging directives are binding, with the DLA Distribution Center in New Cumberland serving as the sole recipient. The contract was posted on August 5, 2026, with responses due by August 17, 2026, and points of contact are listed for procurement inquiries under the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
CLEANING STICK, CONNECT
Solicitation # SPE7M1-26-U-5051
This contract is for the procurement of cleaning sticks and connectors for fiber optic applications under solicitation SPE7M1-26-U-5051, issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a commercial item with a specified NSN of 6070-01-553-2263 and a total contracted quantity of 314 packing groups, each containing 50 units. Delivery is required within 68 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required, and palletization must adhere to DLA packaging requirements. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the product, except for limited functional uses in batteries, lights, sensors, weapon systems, or specific reagents as allowed by NAVSEA, and portable devices containing mercury must include shock-proof design and secondary containment per NAVSEA 5100-003D. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 325998, and multiple approved suppliers are listed, including INSITU, INC., KITCO FIBER OPTICS INC., BAE SYSTEMS MARINE LIMITED, FN HERSTAL S.A., SCIENTIFIC MANAGEMENT ASSOCIATES, MICROCARE, LLC, and LEONARDO UK LTD, each offering approved part numbers. The estimated quantity is subject to change and may not be fully purchased by the IDC.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 325998
New
Federal
Solicitation - Bulk Rock Salt and Bagged Ice Melt - 5 Year IDIQ - Erie VA Medical Center
Solicitation # 36C24426Q0820
A five-year Indefinite-Delivery, Indefinite-Quantity contract is being sought for the supply of bulk rock salt and bagged ice melt to the Erie VA Medical Center, with the award set to commence in 2026 and official start dates to be determined upon contract issuance. This solicitation is exclusively reserved for small businesses as a total set-aside under the SBA program, and all interested vendors must carefully review the full solicitation document and complete every required section to be considered. Proposals must be submitted by 8:00 PM EST on August 11, 2026, and any questions must be directed solely to Contract Specialist Olivia McDonald via email at olivia.mcdonald@va.gov, with the final deadline for inquiries set for 12:00 PM EST on August 4, 2026; no phone calls will be accepted. All respondents are required to lock in their pricing for a minimum of 90 days, and no contract award will be made prior to October 1, 2026. The NAICS code for this procurement is 325998, and the place of performance is in Erie, Pennsylvania, with the contracting office located in Pittsburgh, PA.
244-NETWORK Contract Office 4 (36C244)

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325998
New
DIBBS
Supply of Welding and Cleaning Cleaner (NSN 3439-01-696-2339)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
Soldering Flux Paste Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
Supply of Cleaning Solvent (GE)The contract is for the supply and delivery of one box of Cleaning Solvent, GE, identified by NSN 7930013670994, a commercial chemical product designated for government use. This subcontract is issued by the Defense Logistics Agency under the Department of Defense and falls under the NAICS code 325998, which covers other chemical product and preparation manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. The product is to be delivered to the place of performance located in Westfield, Massachusetts, with the postal code 01085-1482. The contract aims to fulfill a specific logistical requirement for cleaning applications within federal operations, and all bids must be submitted through the official DIBBS platform prior to the deadline.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
Sustainable & Environmentally Compliant Product Supply
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 325998
New
DIBBS
MIL-STD-129 Packaging and Labeling ServicesThe contract requires the repackaging and labeling of adhesive kits in strict compliance with MIL-STD-129R(3), encompassing the application of Data Matrix and Code 128 barcodes, shelf-life marking using Code 32, and DLA-compliant preservation standards to ensure long-term integrity and traceability. All work must adhere to the detailed technical specifications for packaging and labeling mandated by the Department of Defense to support logistics and inventory management across military supply chains. The performance location is designated as Tinker Air Force Base with a zip code of 73145-9156, and the work falls under NAICS code 325998 for other chemical product and preparation manufacturing. This is a subcontract opportunity issued by DLA District Oklahoma City, with a response deadline of August 10, 2026, and the solicitation was posted on August 4, 2026. Interested parties must submit proposals by the specified deadline to comply with federal subcontracting protocols. The requirement emphasizes precise adherence to military standards for labeling, preservation, and data encoding, with no set-aside provisions specified, meaning all eligible contractors may compete. Full compliance with DLA requirements is essential to meet operational readiness and supply chain accountability objectives.
DLA DIST OKC KO CP

POSTED

1 day ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 335910
New
DIBBS
BATTERY POWER SUPPL
Solicitation # SPE7L7-26-Q-2115
The contract specifies the procurement of a Battery Power Supply, shelf life Type 2 with a 12-month extendable lifespan, identified by NSN 6130-01-643-4896 and part number 923800, with four units ordered at one each under a Firm Fixed Price arrangement and zero variance tolerance. Each unit must comply with stringent packaging standards per MIL-STD-2073-1E, including specific preservation methods, materials, and unit containers, and must be marked in accordance with MIL-STD-129 with the special code ZZ for unique requirements. Palletization must meet DLA’s packaging requirements, and hazardous material handling guidelines under IP025 and RQ034 strictly prohibit intentional addition of mercury or mercury compounds, except for functional use in batteries, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise stated, and verification levels are predefined for critical, major, and minor attributes. Delivery is required within 60 days of award, with inspection and acceptance occurring at origin, and FOB terms are set at origin. Shipments must be sent via the fastest traceable means, excluding parcel post, to designated military vessel addresses using the VSM system, with unique TCN and RDD identifiers provided for each consignment. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, managed by the Defense Logistics Agency, with solicitations closed and awards processing underway for delivery dates ranging from July to August 2026.
Battery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-168C
The contract is for one disk valve component identified by NSN 4820-01-221-0266 and part number A49678MEA-HF, supplied by Hunt Valve Company, Inc., under solicitation SPE7MC-26-T-168C. Delivery is required within 20 days to the destination FOB, specifically to USS BOXER LHD 4 at FPO AP 96661, with no tolerance for quantity variance. The item must comply with all DLA packaging requirements referenced in MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking standards, and must be palletized according to DLA guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, instruments, or sensor systems, and any portable devices containing mercury must be shock-proof and have a secondary containment barrier in accordance with NAVSEA 5100-003D. The supplier must adhere to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date. The contract specifies inspection and acceptance at the delivery point, and transportation logistics follow DLAD procedural notes C19 and C20. The required delivery date is August 3, 2026, and the point of contact is Paula Mcclary at the Defense Logistics Agency.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3521
This contract pertains to the procurement of 27 incandescent lamps under NSN 6240-01-678-0127 with a unit price of $27.00, resulting in a total price of $729.00. The items must be delivered within 79 days to the designated destination in Greensboro, North Carolina, with delivery terms set at FOB origin and no variance permitted in quantity. Inspection and acceptance both occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and DLA packaging standards, including specific preparation methods, materials, and unit container codes. Marking requirements adhere to MIL-STD-129 with no special marking applied, and palletization must meet DLA’s packaging guidelines. The product is subject to technical and quality requirements referenced from the DLA Master List, and the acquisition may involve covered defense information. The contract is issued under solicitation SPE8E7-26-T-3521, with a response deadline of August 17, 2026, and the original delivery requirement was February 13, 2027, despite an amended need ship date of August 5, 2026. The recipient is Industries of the Blind Inc, and transportation logistics are governed by DLA procedural notes C19 and C20. The NAICS code for this procurement is 335139, and the contracting agency is the Defense Logistics Agency under the Department of Defense.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4576
The contract is for one battery storage unit with NSN 6140-01-481-1199 under solicitation SPE7L7-26-T-4576, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item requires delivery within 20 days of award and is subject to strict export control regulations under either ITAR or EAR, meaning all technical data associated with the battery system is restricted and cannot be disclosed to foreign persons, including those located in the United States, without prior authorization from the Department of State or Department of Commerce. Access to this controlled technical data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and approved DLA questionnaires. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the NAICS code 335910 applies to the classification of this procurement. Performance is to be carried out at FPO, ZIP 96662, and the primary point of contact is Molly Teegarden, reachable via email and phone provided.
Battery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
FLUX
Solicitation # SPE8E5-26-T-3841
The contract pertains to the procurement of 10 units of FLUX with part number RPPEN2005N and NSN 3439-01-619-5990, supplied by two registered contractors, CAGE B5973 and CAGE 4QD64, with each unit measured as a single EA. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, incorporating referenced technical and quality standards through R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition class. Packaging must comply with DLA’s official procurement packaging standards, and all non-accepted supplies must have government identification removed prior to return. The product has no shelf life restriction. The purchase order specifies that only the named part number as defined herein qualifies as an exact product meeting government needs. Delivery is required within 20 days of award to Fort Sill, Oklahoma, 73503-0000. The solicitation number is SPE8E5-26-T-3841, issued under NAICS code 333992 by the Defense Logistics Agency, with solicitations open from August 5 to August 17, 2026, and primary point of contact is Ira Hedgepeth at ira.hedgepeth@dla.mil or 445-737-8335.
Welding and Soldering Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
BALLAST, LAMP
Solicitation # SPE8E7-26-T-3513
The contract covers the procurement of five ballast lamps identified by NSN 6250-01-688-8971 and part number B-1828, with a unit price of $5.00 per item and a total contract value of $25.00. Delivery is required within 132 days from the award date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container specifications. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization follows DLA packaging guidelines. The delivery address is Industries of the Blind Inc in Greensboro, NC, with the same location used for freight shipping. The contract references DLA’s Master List of Technical and Quality Requirements for compliance, and all documentation must align with specified DLA procedures for transportation and procurement. The solicitation number is SPE8E7-26-T-3513, issued by the Defense Logistics Agency, with a response deadline of August 17, 2026, and a required ship date of December 28, 2026. Primary point of contact is Kelly Mitchell, reachable via phone or email provided in the contract data.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4575
This contract specifies the procurement of a lead acid wet charged battery, part number 524MF, manufactured by East Penn Manufacturing Co. with CAGE code 04055, identified by NSN 6140-01-457-2602. The item is classified as a Type I shelf-life item with a non-extendable six-month lifespan and must comply with stringent packaging and labeling standards including MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating its shelf-life classification. The battery is designated as a hazardous material under DOT Class Corrosive, shipping name Battery, Wet, Filled with Acid, and must be transported via traceable means excluding parcel post. Mercury or mercury-containing compounds are prohibited except for functional uses in batteries, and portable devices containing mercury must be shock-proof with a secondary containment system as per NAVSEA 5100-003D. Inspections occur at destination with zero non-conformances required under sampling standards such as MIL-STD-1916 or ASQ H1331, and all packaging, marking, and shipping must adhere to DLA-specific hazardous material protocols. The delivery is FOB destination within 20 days of contract award, with no quantity variance permitted, and the sole quantity ordered is one unit. Technical and quality requirements are governed by the DLA Master List, and the item must be delivered to Fort McCoy, Wisconsin, with designated shipping and marking instructions. All data points including purchase request, contract number, and delivery details are tied to government-specific identifiers and compliance controls.
Battery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3482
This contract, issued by the Defense Logistics Agency under solicitation SPE8E7-26-T-3482, specifies the procurement of 764 incandescent lamps with NSN 6240-01-455-5542 and part number DS0522-105, sourced from approved suppliers Lockheed Martin Aeronautical Systems and Soderberg Manufacturing Company. The items are classified as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 labeling and RP001 DLA packaging standards, with hazardous material handling governed by TQ requirement IP025 if applicable under Fed-Std-313. The unit of issue is each (EA), with no variance allowed in quantity delivery. Delivery is FOB origin and must occur within 138 days, with the original delivery date set for January 20, 2027, and a need ship date of January 3, 2027. Inspection and acceptance occur at the destination. The end delivery point is Industries of the Blind Inc in Greensboro, NC, and transportation logistics must follow DLAD Proc Notes C19 and C20. All packaging and labeling must reflect DLA-specific requirements, including the correct Unit of Issue and Quantity per Unit Pack as defined in the contract. The solicitation opened on August 5, 2026, with responses due by August 17, 2026, and the contract is governed under NAICS code 335139 for miscellaneous electrical equipment and component manufacturing.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SH
Solicitation # SPE8E5-26-T-3853
This contract specifies the procurement of a nonmetallic special shaped section, supplied on a 25-foot coil, with a required delivery quantity of 17 feet to be delivered within five days to Fort Hood, Texas. The item is identified by NSN 9390-01-179-4508 and purchase request number 7017745767, with a unit price of $17.00 per foot and a total price based on the contracted quantity. The product is classified as a critical application item, and its packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129. Plastic wrapping, cushioning, or dunnage is to be avoided whenever possible, and packaging must prevent distortion during shipping and storage. Shipment must be made via traceable freight methods, excluding parcel post, and directed to a designated warehouse facility at Fort Hood. The contract incorporates all technical and quality requirements referenced by R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is FOB origin with a 10% quantity variance allowed on the upper end and zero on the lower end, with inspection and acceptance occurring at the destination. The item is covered by defense information and subject to restrictions on government identification removal, and all markings and shipping documentation must align with specified codes and protocols.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
ADAPTER, PIPELINE
Solicitation # SPE8E6-26-T-4073
This contract pertains to the procurement of one adapter, pipeline, identified by NSN 4210-01-672-8075 and part number 1G0140, under solicitation SPE8E6-26-T-4073 issued by the Defense Logistics Agency. The item is to be delivered in a single unit with no variance allowed in quantity, and delivery is required within 20 days to Fort Bliss, Texas, FOB origin. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking required. The item must be shipped by traceable means, excluding parcel post, and palletization must follow applicable DLA standards. Transportation and delivery instructions specify the receiving activity as US Army 2-1 AD AWCF SSF, with a designated point of contact for inquiries. The contract incorporates technical and quality requirements from the DLA Master List, and covered defense information may apply, necessitating compliance with relevant security protocols. The acceptance and inspection point is at the destination, and the required delivery date is July 22, 2026. The product is governed under NAICS code 314999, and procurement is conducted using the DoD authorized unit of issue. Documentation for source approval is subject to RC001 requirements, and the removal of government identification from non-accepted supplies is mandated under RQ011. This solicitation does not provide a bidset, and all responsive offerors must adhere to the technical and quality standards referenced in the DLA Master List as of the solicitation's issue date. The contract is identified as a federal action with no set-aside designation. The supplier, Amerex Corporation DBA Getz, is expected to fulfill all packaging, marking, labeling, and delivery requirements precisely to ensure acceptance. The contract data indicates the solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and includes the government’s internal tracking codes for processing and distribution.
All Other Miscellaneous Textile Product Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAMPLING, WATE
Solicitation # SPE7MC-26-T-168N
The contract pertains to the procurement of eight sampling valves for water, identified by NSN 4820-01-725-2063 and part number M3479-CAT, supplied by Derbyshire Marine Products, LLC under solicitation SPE7MC-26-T-168N. The requirement mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which takes precedence over all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity, and delivery must occur within 20 days of contract award, FOB origin. Inspection and acceptance occur at the destination. The product must be shipped traceably to the U.S. Coast Guard cutter ESCANABA at 4000 Coast Guard Blvd, Portsmouth VA 23703, with parcel post explicitly prohibited. Packaging must reflect the specified Quantity per Unit Pack and palletization standards per RP001. All items must be properly marked and labeled per government specifications, and the shipment must be coordinated with the provided TCN and project information. The required delivery date is June 18, 2026, and the contract is governed by DLA policies that control revisions for large acquisitions based on RFP issue dates, unless superseded by formal amendments. Point of contact for inquiries is Paula Mcclary at DLA, with additional government-only tracking codes and identifiers specified for internal logistics use.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
WEATHER STRIP
Solicitation # SPE8E6-26-T-4053
The contract specifies the procurement of 24 feet of weather strip, identified as a commercial off-the-shelf (COTS) item with part number X-1333BT-SINGLE from Trim-Lok Inc, and NSN 5640-01-592-4332. Delivery is required within 10 days under FOB origin terms, with a quantity tolerance of plus 10 percent and no minus allowance. Inspection and acceptance both occur at the destination, and the item must comply with applicable technical and quality requirements from the DLA Master List, which supersedes other standards such as ASTM D3951. Packaging must adhere to DLA requirements, including MIL-STD-129 labeling and palletization per RP001, with hazardous material handling governed by TQ requirement IP025 if applicable. The unit of issue is feet, with bulk packaging, and the delivery point is the U.S. Army facility at Fort Riley, Kansas. The contract is issued under solicitation SPE8E6-26-T-4053, with a response deadline of August 17, 2026, and a required delivery date of August 3, 2026. The Defense Logistics Agency is the acquiring organization, and the point of contact is Vincent Nader. The item is subject to Covered Defense Information requirements, and all packaging and marking must reflect the designated military shipping address, shipment reference RDD 555, and project identifier 9GU TP 2. Government-specific identifiers such as DIC A01 and ADV FC Z9 are included for administrative tracking. Transportation and shipping details follow DLA procedural notices C19 and C20, and the supply chain data indicates military distribution via the 0101 CS BN CO A DISTRIBUTION unit. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates strict compliance with all DLA procurement standards as they are defined at the time of solicitation issuance.
All Other Miscellaneous Textile Product Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details