Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WEATHER STRIP

Active
SPE8E6-26-T-4053Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 24 feet of weather strip, identified as a commercial off-the-shelf (COTS) item with part number X-1333BT-SINGLE from Trim-Lok Inc, and NSN 5640-01-592-4332. Delivery is required within 10 days under FOB origin terms, with a quantity tolerance of plus 10 percent and no minus allowance. Inspection and acceptance both occur at the destination, and the item must comply with applicable technical and quality requirements from the DLA Master List, which supersedes other standards such as ASTM D3951. Packaging must adhere to DLA requirements, including MIL-STD-129 labeling and palletization per RP001, with hazardous material handling governed by TQ requirement IP025 if applicable. The unit of issue is feet, with bulk packaging, and the delivery point is the U.S. Army facility at Fort Riley, Kansas. The contract is issued under solicitation SPE8E6-26-T-4053, with a response deadline of August 17, 2026, and a required delivery date of August 3, 2026. The Defense Logistics Agency is the acquiring organization, and the point of contact is Vincent Nader. The item is subject to Covered Defense Information requirements, and all packaging and marking must reflect the designated military shipping address, shipment reference RDD 555, and project identifier 9GU TP 2. Government-specific identifiers such as DIC A01 and ADV FC Z9 are included for administrative tracking. Transportation and shipping details follow DLA procedural notices C19 and C20, and the supply chain data indicates military distribution via the 0101 CS BN CO A DISTRIBUTION unit. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates strict compliance with all DLA procurement standards as they are defined at the time of solicitation issuance.

General Info

Procure 24 feet of COTS weather strip X-1333BT-SINGLE, deliver by August 3, 2026, to Fort Riley, KS, per DLA standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

314999 - All Other Miscellaneous Textile Product MillsView NAICS

Place of Performance

BLDG 8410 EDWARDS ROAD, FT RILEY, KS, 66442-0000, US

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-4053.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
VINCENT NADER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WEATHER STRIP
WEATHER STRIP
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT ISSUE UPDATE
FUTURE EFFECTIVE DATE June 1 2021 Unit Issue = Feet (FT) QUP= X (Bulk) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
TRIM-LOK INC 57137 P/N X-1333BT-SINGLE
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744550 0001 FT 24.000
NSN/MATERIAL:5640015924332
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: DESTINATION
SPE8E6-26-T-4053
SECTION B
PR: 7017744550 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:1
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81WRD
0101 CS BN CO A DISTRIBUTI
US ARMY 0101 CS BN CO A DISTRIBUTIO
BLDG 8410 EDWARDS ROAD
FT RILEY KS 66442-0000
US
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W81WRD
0101 CS BN CO A DISTRIBUTI
US ARMY 0101 CS BN CO A DISTRIBUTIO
BLDG 8410 EDWARDS ROAD
FT RILEY KS 66442-0000
US
MARKFOR
W81WRD
0101 CS BN CO A DISTRIBUTI
US ARMY 0101 CS BN CO A DISTRIBUTIO
BLDG 8410 EDWARDS ROAD
FT RILEY KS 66442-0000
US
M/F: (TCN) W81WRD62100100
RDD: 555
PROJ: 9GU TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE8E6-26-T-4053 NSN/Part Number: 5640-01-592-4332 Quantity: 24 FT Purchase Request: 7017744550QTY: 24 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 314999
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4008
This contract calls for the procurement of 304 units of a portable fire extinguisher identified by NSN 4210-01-438-3933, with a unit price of $304.00 and a total contract value of $92,416. Delivery is required within two days of award, FOB destination, to the designated receiving warehouse in Tracy, California, with no variance allowed in quantity. The extinguishers must comply with MIL-STD-2073-1E packaging standards and be marked according to MIL-STD-129, with palletization following DLA packaging requirements. All packaging materials and methods must meet specific hazardous material handling guidelines under IP025, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product unless expressly exempted for functional components like batteries or sensors as permitted by NAVSEA. The extinguishers must be shipped in accordance with DLA transport notes C19 and C20, and the supplier must include approved Safety Data Sheets and Hazard Communication Standard-compliant labels as mandated by OSHA’s updated regulations since June 1, 2015. The supplier is also required to train employees on these safety documentation and labeling requirements. The solicitation is a total small business set-aside under NAICS code 314999, with responses due by August 17, 2026, and performance governed by DLA’s master list of technical and quality requirements referenced by R and I numbers.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE8E6-26-T-4068
This contract pertains to the procurement of a nonmetallic hose assembly with the NSN 4210-01-707-7372 and part numbers 20-100MF50 and FE20-100MF50, requiring a quantity of 16 units identified by the unit of issue AY. The item has a strict non-extendable shelf life of 180 months as specified under RS039 and must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking requirements, with no special marking codes applied. The hose assembly is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all documentation must adhere to DLA’s source approval and packaging protocols. Delivery is FOB origin with an 80-day lead time, and acceptance occurs at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. The contract specifies a zero percent variance in quantity and requires the supplier to meet the original required delivery date of December 17, 2026, with a needed ship date of April 13, 2026. Transportation and shipping instructions are governed by DLA procedural notes C19 and C20, and unit of issue conversions must align with the DLA-provided ANSI X12 standard. The solicitation number is SPE8E6-26-T-4068, issued by DLA District San Joaquin under the Department of Defense, with primary point of contact John Lieb.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
GEAR, FIRE PROTECTIVE
Solicitation # SPE8E9-26-T-3374
This contract is for the procurement of fire protective gear, specifically item P/N NAVY2K-M-29 (MD-REG), manufactured by LION APPAREL INC, with a National Stock Number of 4210017186904. The gear is classified as a TYPE I (CODE W) item with a non-extendable shelf life of 120 months, as defined by the applicable shelf life requirement RS030 and RS001. The contract mandates strict adherence to technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and enforces packaging, marking, and shipping compliance with MIL-STD-2073-1E and MIL-STD-129. Commercial labels must include the contractor’s name, contract number, size, NSN, fiber content, and laundering instructions, with special marking code 32 applied to denote TYPE I and shelf life information. Packaging must conform to DLA’s RP001 standards and include weatherproof protection when destined for overseas or FMS customers. The quantity ordered is 28 units, each priced at $28.00, for a total value of $784.00, with delivery required within 53 days from the contract’s effective date under FOB origin terms. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of September 26, 2025, and an original delivery deadline of November 24, 2026. This solicitation, numbered SPE8E9-26-T-3374, was issued as a total small business set-aside under NAICS code 314999 and is managed by the Department of Defense’s Construction & Equipment MRO Service I. All transportation and shipping protocols must follow established DLAD procedural notes, and the point of contact for inquiries is Matthew Kruc.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE8E6-26-T-4074
This contract is for the procurement of a non-metric hose assembly with the NSN 4210-01-707-7268 and part number BH51.5X50BN, supplied by Ecophon Supply and Service, Inc. under solicitation SPE8E6-26-T-4074. The item is classified as a TYPE I (Code Y) with a non-extendable shelf life of 180 months, and it must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, with marking following MIL-STD-129 and no special marking codes applied. The item must be delivered FOB origin within 32 days of contract award, with a required delivery date of October 7, 2026, and a need ship date of August 14, 2026. The quantity ordered is 12 AY, with zero percent variance allowed, and inspection and acceptance occur at the destination. The delivery address is DLA Distribution San Joaquin in Tracy, California, and the unit of issue is AY. Documentation for source approval and handling of covered defense information may apply, and transportation instructions are governed by DLAD procedures C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
ADAPTER, PIPELINE
Solicitation # SPE8E6-26-T-4073
This contract pertains to the procurement of one adapter, pipeline, identified by NSN 4210-01-672-8075 and part number 1G0140, under solicitation SPE8E6-26-T-4073 issued by the Defense Logistics Agency. The item is to be delivered in a single unit with no variance allowed in quantity, and delivery is required within 20 days to Fort Bliss, Texas, FOB origin. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking required. The item must be shipped by traceable means, excluding parcel post, and palletization must follow applicable DLA standards. Transportation and delivery instructions specify the receiving activity as US Army 2-1 AD AWCF SSF, with a designated point of contact for inquiries. The contract incorporates technical and quality requirements from the DLA Master List, and covered defense information may apply, necessitating compliance with relevant security protocols. The acceptance and inspection point is at the destination, and the required delivery date is July 22, 2026. The product is governed under NAICS code 314999, and procurement is conducted using the DoD authorized unit of issue. Documentation for source approval is subject to RC001 requirements, and the removal of government identification from non-accepted supplies is mandated under RQ011. This solicitation does not provide a bidset, and all responsive offerors must adhere to the technical and quality standards referenced in the DLA Master List as of the solicitation's issue date. The contract is identified as a federal action with no set-aside designation. The supplier, Amerex Corporation DBA Getz, is expected to fulfill all packaging, marking, labeling, and delivery requirements precisely to ensure acceptance. The contract data indicates the solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and includes the government’s internal tracking codes for processing and distribution.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE8E6-26-T-4050
The contract is for nonmetallic hose with NSN 4210-01-613-2630 and part number 713426-1.25-034-6, issued under solicitation SPE8E6-26-T-4050, requiring four units to be delivered within 167 days from the order date, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including RQ011 for labeling and RP001 for packaging standards; hazardous materials must conform to TQ requirement IP025 while nonhazardous items follow ASTM D3951, with DLA requirements taking precedence. All packaging must be marked and labeled per MIL-STD-129, with unit of issue and quantity per unit pack strictly as specified, and palletization must adhere to DLA’s packaging directives. Delivery must be shipped to the specified DLA Distribution Depot Hill address in Hill AFB, Utah, with the required ship date of February 1, 2027 and original delivery deadline of March 17, 2027. The contract mandates adherence to all referenced technical documentation, including requirements for source approval, covered defense information, and transportation procedures outlined in DLA Procurement Notes C19 and C20, and the purchase request number is 7017757278.
DEPOT HILL

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
LINK, FUSIBLE, FIRE
Solicitation # SPE8E6-26-T-4052
The contract pertains to the procurement of LINK FUSIBLE FIRE items under solicitation SPE8E6-26-T-4052, with a total quantity of 304 units at a unit price of $304.00, resulting in a total contract value of $92,416. The item is identified by NSN 4210-01-685-3524 and must be delivered FOB origin within 167 days of the contract award, with a required delivery date of March 2, 2027. All packaging, labeling, and palletization must comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing RP001 for packaging, MIL-STD-129 for marking, and either TQ requirement IP025 if hazardous under FED-STD-313 or ASTM D3951 if non-hazardous—though DLA requirements supersede ASTM standards. The unit of issue is each (EA), with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery address is DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with parcel post and shipping instructions aligned with DLA procurement notes C19 and C20. Documentation must adhere to RC001 for source approval requests and RQ011 for removal of government identification from non-accepted supplies, with Covered Defense Information potentially applying under RD003. The contract mandates full compliance with all referenced DLA technical standards, and the point of contact is John Lieb, reachable via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
GEAR, FIRE PROTECTIV
Solicitation # SPE8E6-26-T-4043
The contract specifies the procurement of fire protective gear, identified by part number NAVY2K-XXL-31 in XX-Large/Long size, supplied by LION APPAREL INC under the NSN 4210017186907. The item is classified as a commercial item and requires compliance with all referenced technical and quality standards from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and documentation rules such as RP001 for DLA packaging, RC001 for source approval, RQ011 for removal of government identification, and RQ017 for bare item marking. All packaging must adhere to MIL-STD-129 for labeling and marking, with hazardous materials subject to TQ requirement IP025 and non-hazardous items following ASTM D3951, though DLA requirements supersede ASTM standards. The unit of issue is each (EA), with a quantity of six units required at a unit price of $6.00, totaling $36.00, and the delivery must meet a zero variance tolerance. Delivery is FOB origin with a 167-day lead time, and the goods must be delivered to the DLA Distribution facility at New Cumberland, PA. Inspection and acceptance occur at the destination, and all shipments must comply with DLA procurement and transportation notes C19 and C20. The original required delivery date is December 23, 2026, with a need-by date of February 1, 2027, under solicitation SPE8E6-26-T-4043, issued with a response deadline of August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4048
This contract pertains to the procurement of four fire extinguishers identified by NSN 4210-01-722-2075 and part number MU0485NVC-F, with a unit price of $4.00 and a total contract value of $16.00. Delivery is required within 167 days to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB destination terms, with no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific packaging methods, materials, and marking requirements, with palletization governed by DLA Packaging Requirements. The delivery is subject to inspection and acceptance at the destination point. The contract incorporates a range of technical and quality requirements referenced from the DLA Master List, including provisions for hazardous material handling, compliance with OSHA’s revised Hazard Communication Standard, and submission of Safety Data Sheets and labeled containers in alignment with 29 C.F.R. 1910.1200. Suppliers must train employees on these updated safety protocols and submit all documentation—such as SDS, labeling, and source approval requests—for contracting officer review prior to award. Transportation logistics follow DLAD procedural notes C19 and C20, and the acquisition is governed under a federal solicitation issued by the Department of Defense, with all technical compliance and safety regulations strictly enforced for hazardous materials delivered to government facilities.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
TABLE, PARACHUTE PAC
Solicitation # SPE8E5-26-T-3792
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
Federal
TAPE,NUCLEAR ET GR
Solicitation # N0010426QED08
This contract pertains to the procurement of TAPE, NUCLEAR ET GR under solicitation number N0010426QED08, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical office. The solicitation mandates strict compliance with technical, quality, and packaging standards as defined in the Individual Repair Part Ordering Data (IRPOD) and referenced military specifications, with the order of precedence clearly established beginning with contract amendments and descending through schedules, terms, IRPOD, STRs, drawings, and specifications. Contractors must adhere to all cited document revisions unless expressly approved otherwise by the Contracting Officer, and are required to use entire document revisions without mixing parts from different versions. Packaging must comply with MIL-PRF-23199 and MIL-STD-2073 where applicable, and the use of MIL-DTL-24466 green poly bags is permitted only under specific cleanliness control conditions, with fire-retardant materials no longer required. Mercury and mercury-containing compounds are strictly prohibited from contact with supplied hardware. Quality assurance obligations are governed by the IRPOD, requiring contractors to maintain a government-acceptable inspection system and retain full records throughout performance and beyond. Technical data submissions must follow DD Form 1423 guidelines, including defined inspection and acceptance codes, distribution restrictions based on distribution statement codes (A–F), and precise submission schedules tied to contract end-of-contract (EOC) deadlines. Contractors must submit certified reports of test and inspection, as well as cure date certificates, per NAVSUP-WSS-specific sequences DI-QCIC-8872 and DI-MISC-81318, with separate packages required for each unique contract, NSN, and nomenclature combination. All technical documents are accessible only via the locked BPMI e-commerce portal, requiring pre-registration, and hard copies will not be mailed. Pricing is valid for 60 days post-closing date, and full compliance with cybersecurity maturity certification, veteran and disability employment equity, small business representations, priority rating for defense needs, and security prohibitions is mandatory. The contract is issued electronically, and acceptance of the proposal constitutes a binding agreement.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 314999
New
Federal
LEAD WOOL BLANKET
Solicitation # N0010426QED14
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 335910
New
DIBBS
BATTERY POWER SUPPL
Solicitation # SPE7L7-26-Q-2115
The contract specifies the procurement of a Battery Power Supply, shelf life Type 2 with a 12-month extendable lifespan, identified by NSN 6130-01-643-4896 and part number 923800, with four units ordered at one each under a Firm Fixed Price arrangement and zero variance tolerance. Each unit must comply with stringent packaging standards per MIL-STD-2073-1E, including specific preservation methods, materials, and unit containers, and must be marked in accordance with MIL-STD-129 with the special code ZZ for unique requirements. Palletization must meet DLA’s packaging requirements, and hazardous material handling guidelines under IP025 and RQ034 strictly prohibit intentional addition of mercury or mercury compounds, except for functional use in batteries, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise stated, and verification levels are predefined for critical, major, and minor attributes. Delivery is required within 60 days of award, with inspection and acceptance occurring at origin, and FOB terms are set at origin. Shipments must be sent via the fastest traceable means, excluding parcel post, to designated military vessel addresses using the VSM system, with unique TCN and RDD identifiers provided for each consignment. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, managed by the Defense Logistics Agency, with solicitations closed and awards processing underway for delivery dates ranging from July to August 2026.
Battery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-168C
The contract is for one disk valve component identified by NSN 4820-01-221-0266 and part number A49678MEA-HF, supplied by Hunt Valve Company, Inc., under solicitation SPE7MC-26-T-168C. Delivery is required within 20 days to the destination FOB, specifically to USS BOXER LHD 4 at FPO AP 96661, with no tolerance for quantity variance. The item must comply with all DLA packaging requirements referenced in MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking standards, and must be palletized according to DLA guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, instruments, or sensor systems, and any portable devices containing mercury must be shock-proof and have a secondary containment barrier in accordance with NAVSEA 5100-003D. The supplier must adhere to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date. The contract specifies inspection and acceptance at the delivery point, and transportation logistics follow DLAD procedural notes C19 and C20. The required delivery date is August 3, 2026, and the point of contact is Paula Mcclary at the Defense Logistics Agency.
Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3521
This contract pertains to the procurement of 27 incandescent lamps under NSN 6240-01-678-0127 with a unit price of $27.00, resulting in a total price of $729.00. The items must be delivered within 79 days to the designated destination in Greensboro, North Carolina, with delivery terms set at FOB origin and no variance permitted in quantity. Inspection and acceptance both occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and DLA packaging standards, including specific preparation methods, materials, and unit container codes. Marking requirements adhere to MIL-STD-129 with no special marking applied, and palletization must meet DLA’s packaging guidelines. The product is subject to technical and quality requirements referenced from the DLA Master List, and the acquisition may involve covered defense information. The contract is issued under solicitation SPE8E7-26-T-3521, with a response deadline of August 17, 2026, and the original delivery requirement was February 13, 2027, despite an amended need ship date of August 5, 2026. The recipient is Industries of the Blind Inc, and transportation logistics are governed by DLA procedural notes C19 and C20. The NAICS code for this procurement is 335139, and the contracting agency is the Defense Logistics Agency under the Department of Defense.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4576
The contract is for one battery storage unit with NSN 6140-01-481-1199 under solicitation SPE7L7-26-T-4576, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item requires delivery within 20 days of award and is subject to strict export control regulations under either ITAR or EAR, meaning all technical data associated with the battery system is restricted and cannot be disclosed to foreign persons, including those located in the United States, without prior authorization from the Department of State or Department of Commerce. Access to this controlled technical data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and approved DLA questionnaires. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the NAICS code 335910 applies to the classification of this procurement. Performance is to be carried out at FPO, ZIP 96662, and the primary point of contact is Molly Teegarden, reachable via email and phone provided.
Battery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
FLUX
Solicitation # SPE8E5-26-T-3841
The contract pertains to the procurement of 10 units of FLUX with part number RPPEN2005N and NSN 3439-01-619-5990, supplied by two registered contractors, CAGE B5973 and CAGE 4QD64, with each unit measured as a single EA. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, incorporating referenced technical and quality standards through R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition class. Packaging must comply with DLA’s official procurement packaging standards, and all non-accepted supplies must have government identification removed prior to return. The product has no shelf life restriction. The purchase order specifies that only the named part number as defined herein qualifies as an exact product meeting government needs. Delivery is required within 20 days of award to Fort Sill, Oklahoma, 73503-0000. The solicitation number is SPE8E5-26-T-3841, issued under NAICS code 333992 by the Defense Logistics Agency, with solicitations open from August 5 to August 17, 2026, and primary point of contact is Ira Hedgepeth at ira.hedgepeth@dla.mil or 445-737-8335.
Welding and Soldering Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
BALLAST, LAMP
Solicitation # SPE8E7-26-T-3513
The contract covers the procurement of five ballast lamps identified by NSN 6250-01-688-8971 and part number B-1828, with a unit price of $5.00 per item and a total contract value of $25.00. Delivery is required within 132 days from the award date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container specifications. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization follows DLA packaging guidelines. The delivery address is Industries of the Blind Inc in Greensboro, NC, with the same location used for freight shipping. The contract references DLA’s Master List of Technical and Quality Requirements for compliance, and all documentation must align with specified DLA procedures for transportation and procurement. The solicitation number is SPE8E7-26-T-3513, issued by the Defense Logistics Agency, with a response deadline of August 17, 2026, and a required ship date of December 28, 2026. Primary point of contact is Kelly Mitchell, reachable via phone or email provided in the contract data.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4575
This contract specifies the procurement of a lead acid wet charged battery, part number 524MF, manufactured by East Penn Manufacturing Co. with CAGE code 04055, identified by NSN 6140-01-457-2602. The item is classified as a Type I shelf-life item with a non-extendable six-month lifespan and must comply with stringent packaging and labeling standards including MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating its shelf-life classification. The battery is designated as a hazardous material under DOT Class Corrosive, shipping name Battery, Wet, Filled with Acid, and must be transported via traceable means excluding parcel post. Mercury or mercury-containing compounds are prohibited except for functional uses in batteries, and portable devices containing mercury must be shock-proof with a secondary containment system as per NAVSEA 5100-003D. Inspections occur at destination with zero non-conformances required under sampling standards such as MIL-STD-1916 or ASQ H1331, and all packaging, marking, and shipping must adhere to DLA-specific hazardous material protocols. The delivery is FOB destination within 20 days of contract award, with no quantity variance permitted, and the sole quantity ordered is one unit. Technical and quality requirements are governed by the DLA Master List, and the item must be delivered to Fort McCoy, Wisconsin, with designated shipping and marking instructions. All data points including purchase request, contract number, and delivery details are tied to government-specific identifiers and compliance controls.
Battery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3482
This contract, issued by the Defense Logistics Agency under solicitation SPE8E7-26-T-3482, specifies the procurement of 764 incandescent lamps with NSN 6240-01-455-5542 and part number DS0522-105, sourced from approved suppliers Lockheed Martin Aeronautical Systems and Soderberg Manufacturing Company. The items are classified as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 labeling and RP001 DLA packaging standards, with hazardous material handling governed by TQ requirement IP025 if applicable under Fed-Std-313. The unit of issue is each (EA), with no variance allowed in quantity delivery. Delivery is FOB origin and must occur within 138 days, with the original delivery date set for January 20, 2027, and a need ship date of January 3, 2027. Inspection and acceptance occur at the destination. The end delivery point is Industries of the Blind Inc in Greensboro, NC, and transportation logistics must follow DLAD Proc Notes C19 and C20. All packaging and labeling must reflect DLA-specific requirements, including the correct Unit of Issue and Quantity per Unit Pack as defined in the contract. The solicitation opened on August 5, 2026, with responses due by August 17, 2026, and the contract is governed under NAICS code 335139 for miscellaneous electrical equipment and component manufacturing.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SH
Solicitation # SPE8E5-26-T-3853
This contract specifies the procurement of a nonmetallic special shaped section, supplied on a 25-foot coil, with a required delivery quantity of 17 feet to be delivered within five days to Fort Hood, Texas. The item is identified by NSN 9390-01-179-4508 and purchase request number 7017745767, with a unit price of $17.00 per foot and a total price based on the contracted quantity. The product is classified as a critical application item, and its packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129. Plastic wrapping, cushioning, or dunnage is to be avoided whenever possible, and packaging must prevent distortion during shipping and storage. Shipment must be made via traceable freight methods, excluding parcel post, and directed to a designated warehouse facility at Fort Hood. The contract incorporates all technical and quality requirements referenced by R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is FOB origin with a 10% quantity variance allowed on the upper end and zero on the lower end, with inspection and acceptance occurring at the destination. The item is covered by defense information and subject to restrictions on government identification removal, and all markings and shipping documentation must align with specified codes and protocols.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAMPLING, WATE
Solicitation # SPE7MC-26-T-168N
The contract pertains to the procurement of eight sampling valves for water, identified by NSN 4820-01-725-2063 and part number M3479-CAT, supplied by Derbyshire Marine Products, LLC under solicitation SPE7MC-26-T-168N. The requirement mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which takes precedence over all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity, and delivery must occur within 20 days of contract award, FOB origin. Inspection and acceptance occur at the destination. The product must be shipped traceably to the U.S. Coast Guard cutter ESCANABA at 4000 Coast Guard Blvd, Portsmouth VA 23703, with parcel post explicitly prohibited. Packaging must reflect the specified Quantity per Unit Pack and palletization standards per RP001. All items must be properly marked and labeled per government specifications, and the shipment must be coordinated with the provided TCN and project information. The required delivery date is June 18, 2026, and the contract is governed by DLA policies that control revisions for large acquisitions based on RFP issue dates, unless superseded by formal amendments. Point of contact for inquiries is Paula Mcclary at DLA, with additional government-only tracking codes and identifiers specified for internal logistics use.
Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-168R
The contract specifies the procurement of two safety relief valves, each sized at 1/2 inch, type 940, with a set pressure range of 1001 to 1400 PSI, identified by NSN 4820011513690 and corresponding part numbers from Emerson Automation Solutions and Dante Valve Company. The valves must adhere to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are prohibited in manufacturing or direct contact unless explicitly exempted for functional uses such as batteries, instruments, or chemical reagents, with portable mercury-containing devices requiring shock-proof construction and dual containment per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization governed by DLA’s RP001 requirements, and the items are to be delivered FOB destination within 20 days, with no variance allowed in quantity. Delivery is split between two U.S. Navy vessels, USS ASHLAND and USS RUSHMORE, with transportation instructions prohibiting parcel post and mandating the fastest traceable means. Both units have the same required delivery date of April 29, 2026, and are subject to inspection and acceptance at the destination. The contract is issued under solicitation SPE7MC-26-T-168R by the Defense Logistics Agency, with procurement governed by DoD unit of issue standards and tracked through VSM for vendor compliance.
Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details