Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

EXTINGUISHER, FIRE

Active
SPE8E6-26-T-4048Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of four fire extinguishers identified by NSN 4210-01-722-2075 and part number MU0485NVC-F, with a unit price of $4.00 and a total contract value of $16.00. Delivery is required within 167 days to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB destination terms, with no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific packaging methods, materials, and marking requirements, with palletization governed by DLA Packaging Requirements. The delivery is subject to inspection and acceptance at the destination point. The contract incorporates a range of technical and quality requirements referenced from the DLA Master List, including provisions for hazardous material handling, compliance with OSHA’s revised Hazard Communication Standard, and submission of Safety Data Sheets and labeled containers in alignment with 29 C.F.R. 1910.1200. Suppliers must train employees on these updated safety protocols and submit all documentation—such as SDS, labeling, and source approval requests—for contracting officer review prior to award. Transportation logistics follow DLAD procedural notes C19 and C20, and the acquisition is governed under a federal solicitation issued by the Department of Defense, with all technical compliance and safety regulations strictly enforced for hazardous materials delivered to government facilities.

General Info

Four fire extinguishers at $4 each, delivered to New Cumberland, PA, within 167 days, with strict packaging and safety compliance.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

314999 - All Other Miscellaneous Textile Product MillsView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E6-26-T-4048 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
John Lieb
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
EXTINGUISHER,FIRE
EXTINGUISHER,FIRE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
SPE8E6-26-T-4048
SECTION B
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
USSC ACQUISITION CORP 82TL6 P/N MU0485NVC-F
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017756996 0001 EA 4.000
NSN/MATERIAL:4210017222075
DELIVERY (IN DAYS):0167
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE8E6-26-T-4048
SECTION B
PR: 7017756996 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:03/16/2027
SPE8E6-26-T-4048 NSN/Part Number: 4210-01-722-2075 Quantity: 4 EA Purchase Request: 7017756996QTY: 4 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 314999
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4008
This contract calls for the procurement of 304 units of a portable fire extinguisher identified by NSN 4210-01-438-3933, with a unit price of $304.00 and a total contract value of $92,416. Delivery is required within two days of award, FOB destination, to the designated receiving warehouse in Tracy, California, with no variance allowed in quantity. The extinguishers must comply with MIL-STD-2073-1E packaging standards and be marked according to MIL-STD-129, with palletization following DLA packaging requirements. All packaging materials and methods must meet specific hazardous material handling guidelines under IP025, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product unless expressly exempted for functional components like batteries or sensors as permitted by NAVSEA. The extinguishers must be shipped in accordance with DLA transport notes C19 and C20, and the supplier must include approved Safety Data Sheets and Hazard Communication Standard-compliant labels as mandated by OSHA’s updated regulations since June 1, 2015. The supplier is also required to train employees on these safety documentation and labeling requirements. The solicitation is a total small business set-aside under NAICS code 314999, with responses due by August 17, 2026, and performance governed by DLA’s master list of technical and quality requirements referenced by R and I numbers.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE8E6-26-T-4068
This contract pertains to the procurement of a nonmetallic hose assembly with the NSN 4210-01-707-7372 and part numbers 20-100MF50 and FE20-100MF50, requiring a quantity of 16 units identified by the unit of issue AY. The item has a strict non-extendable shelf life of 180 months as specified under RS039 and must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking requirements, with no special marking codes applied. The hose assembly is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all documentation must adhere to DLA’s source approval and packaging protocols. Delivery is FOB origin with an 80-day lead time, and acceptance occurs at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. The contract specifies a zero percent variance in quantity and requires the supplier to meet the original required delivery date of December 17, 2026, with a needed ship date of April 13, 2026. Transportation and shipping instructions are governed by DLA procedural notes C19 and C20, and unit of issue conversions must align with the DLA-provided ANSI X12 standard. The solicitation number is SPE8E6-26-T-4068, issued by DLA District San Joaquin under the Department of Defense, with primary point of contact John Lieb.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
GEAR, FIRE PROTECTIVE
Solicitation # SPE8E9-26-T-3374
This contract is for the procurement of fire protective gear, specifically item P/N NAVY2K-M-29 (MD-REG), manufactured by LION APPAREL INC, with a National Stock Number of 4210017186904. The gear is classified as a TYPE I (CODE W) item with a non-extendable shelf life of 120 months, as defined by the applicable shelf life requirement RS030 and RS001. The contract mandates strict adherence to technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and enforces packaging, marking, and shipping compliance with MIL-STD-2073-1E and MIL-STD-129. Commercial labels must include the contractor’s name, contract number, size, NSN, fiber content, and laundering instructions, with special marking code 32 applied to denote TYPE I and shelf life information. Packaging must conform to DLA’s RP001 standards and include weatherproof protection when destined for overseas or FMS customers. The quantity ordered is 28 units, each priced at $28.00, for a total value of $784.00, with delivery required within 53 days from the contract’s effective date under FOB origin terms. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of September 26, 2025, and an original delivery deadline of November 24, 2026. This solicitation, numbered SPE8E9-26-T-3374, was issued as a total small business set-aside under NAICS code 314999 and is managed by the Department of Defense’s Construction & Equipment MRO Service I. All transportation and shipping protocols must follow established DLAD procedural notes, and the point of contact for inquiries is Matthew Kruc.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE8E6-26-T-4074
This contract is for the procurement of a non-metric hose assembly with the NSN 4210-01-707-7268 and part number BH51.5X50BN, supplied by Ecophon Supply and Service, Inc. under solicitation SPE8E6-26-T-4074. The item is classified as a TYPE I (Code Y) with a non-extendable shelf life of 180 months, and it must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, with marking following MIL-STD-129 and no special marking codes applied. The item must be delivered FOB origin within 32 days of contract award, with a required delivery date of October 7, 2026, and a need ship date of August 14, 2026. The quantity ordered is 12 AY, with zero percent variance allowed, and inspection and acceptance occur at the destination. The delivery address is DLA Distribution San Joaquin in Tracy, California, and the unit of issue is AY. Documentation for source approval and handling of covered defense information may apply, and transportation instructions are governed by DLAD procedures C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
ADAPTER, PIPELINE
Solicitation # SPE8E6-26-T-4073
This contract pertains to the procurement of one adapter, pipeline, identified by NSN 4210-01-672-8075 and part number 1G0140, under solicitation SPE8E6-26-T-4073 issued by the Defense Logistics Agency. The item is to be delivered in a single unit with no variance allowed in quantity, and delivery is required within 20 days to Fort Bliss, Texas, FOB origin. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking required. The item must be shipped by traceable means, excluding parcel post, and palletization must follow applicable DLA standards. Transportation and delivery instructions specify the receiving activity as US Army 2-1 AD AWCF SSF, with a designated point of contact for inquiries. The contract incorporates technical and quality requirements from the DLA Master List, and covered defense information may apply, necessitating compliance with relevant security protocols. The acceptance and inspection point is at the destination, and the required delivery date is July 22, 2026. The product is governed under NAICS code 314999, and procurement is conducted using the DoD authorized unit of issue. Documentation for source approval is subject to RC001 requirements, and the removal of government identification from non-accepted supplies is mandated under RQ011. This solicitation does not provide a bidset, and all responsive offerors must adhere to the technical and quality standards referenced in the DLA Master List as of the solicitation's issue date. The contract is identified as a federal action with no set-aside designation. The supplier, Amerex Corporation DBA Getz, is expected to fulfill all packaging, marking, labeling, and delivery requirements precisely to ensure acceptance. The contract data indicates the solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and includes the government’s internal tracking codes for processing and distribution.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
WEATHER STRIP
Solicitation # SPE8E6-26-T-4053
The contract specifies the procurement of 24 feet of weather strip, identified as a commercial off-the-shelf (COTS) item with part number X-1333BT-SINGLE from Trim-Lok Inc, and NSN 5640-01-592-4332. Delivery is required within 10 days under FOB origin terms, with a quantity tolerance of plus 10 percent and no minus allowance. Inspection and acceptance both occur at the destination, and the item must comply with applicable technical and quality requirements from the DLA Master List, which supersedes other standards such as ASTM D3951. Packaging must adhere to DLA requirements, including MIL-STD-129 labeling and palletization per RP001, with hazardous material handling governed by TQ requirement IP025 if applicable. The unit of issue is feet, with bulk packaging, and the delivery point is the U.S. Army facility at Fort Riley, Kansas. The contract is issued under solicitation SPE8E6-26-T-4053, with a response deadline of August 17, 2026, and a required delivery date of August 3, 2026. The Defense Logistics Agency is the acquiring organization, and the point of contact is Vincent Nader. The item is subject to Covered Defense Information requirements, and all packaging and marking must reflect the designated military shipping address, shipment reference RDD 555, and project identifier 9GU TP 2. Government-specific identifiers such as DIC A01 and ADV FC Z9 are included for administrative tracking. Transportation and shipping details follow DLA procedural notices C19 and C20, and the supply chain data indicates military distribution via the 0101 CS BN CO A DISTRIBUTION unit. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates strict compliance with all DLA procurement standards as they are defined at the time of solicitation issuance.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE8E6-26-T-4050
The contract is for nonmetallic hose with NSN 4210-01-613-2630 and part number 713426-1.25-034-6, issued under solicitation SPE8E6-26-T-4050, requiring four units to be delivered within 167 days from the order date, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including RQ011 for labeling and RP001 for packaging standards; hazardous materials must conform to TQ requirement IP025 while nonhazardous items follow ASTM D3951, with DLA requirements taking precedence. All packaging must be marked and labeled per MIL-STD-129, with unit of issue and quantity per unit pack strictly as specified, and palletization must adhere to DLA’s packaging directives. Delivery must be shipped to the specified DLA Distribution Depot Hill address in Hill AFB, Utah, with the required ship date of February 1, 2027 and original delivery deadline of March 17, 2027. The contract mandates adherence to all referenced technical documentation, including requirements for source approval, covered defense information, and transportation procedures outlined in DLA Procurement Notes C19 and C20, and the purchase request number is 7017757278.
DEPOT HILL

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
LINK, FUSIBLE, FIRE
Solicitation # SPE8E6-26-T-4052
The contract pertains to the procurement of LINK FUSIBLE FIRE items under solicitation SPE8E6-26-T-4052, with a total quantity of 304 units at a unit price of $304.00, resulting in a total contract value of $92,416. The item is identified by NSN 4210-01-685-3524 and must be delivered FOB origin within 167 days of the contract award, with a required delivery date of March 2, 2027. All packaging, labeling, and palletization must comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing RP001 for packaging, MIL-STD-129 for marking, and either TQ requirement IP025 if hazardous under FED-STD-313 or ASTM D3951 if non-hazardous—though DLA requirements supersede ASTM standards. The unit of issue is each (EA), with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery address is DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with parcel post and shipping instructions aligned with DLA procurement notes C19 and C20. Documentation must adhere to RC001 for source approval requests and RQ011 for removal of government identification from non-accepted supplies, with Covered Defense Information potentially applying under RD003. The contract mandates full compliance with all referenced DLA technical standards, and the point of contact is John Lieb, reachable via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
GEAR, FIRE PROTECTIV
Solicitation # SPE8E6-26-T-4043
The contract specifies the procurement of fire protective gear, identified by part number NAVY2K-XXL-31 in XX-Large/Long size, supplied by LION APPAREL INC under the NSN 4210017186907. The item is classified as a commercial item and requires compliance with all referenced technical and quality standards from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and documentation rules such as RP001 for DLA packaging, RC001 for source approval, RQ011 for removal of government identification, and RQ017 for bare item marking. All packaging must adhere to MIL-STD-129 for labeling and marking, with hazardous materials subject to TQ requirement IP025 and non-hazardous items following ASTM D3951, though DLA requirements supersede ASTM standards. The unit of issue is each (EA), with a quantity of six units required at a unit price of $6.00, totaling $36.00, and the delivery must meet a zero variance tolerance. Delivery is FOB origin with a 167-day lead time, and the goods must be delivered to the DLA Distribution facility at New Cumberland, PA. Inspection and acceptance occur at the destination, and all shipments must comply with DLA procurement and transportation notes C19 and C20. The original required delivery date is December 23, 2026, with a need-by date of February 1, 2027, under solicitation SPE8E6-26-T-4043, issued with a response deadline of August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
TABLE, PARACHUTE PAC
Solicitation # SPE8E5-26-T-3792
The contract pertains to the procurement of 12 units of a TABLE, PARACHUTE PACK with NSN 7195-00-973-1961, under solicitation SPE8E5-26-T-3792, which is a total small business set-aside. Delivery is required within 167 days from the contract award, with FOB origin terms and inspection and acceptance taking place at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory adherence to MIL-STD-129 for marking and labeling, and RP001 packaging standards. Palletization must follow DLA requirements, and the shipment is destined for the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA. The item is classified as a critical application item requiring source inspection, and the supplier must ensure compliance with the Certificate of Quality Compliance and relevant CDRLs, which can be accessed via the DLA Master List of Technical and Quality Requirements website. The government may not possess the specialized tooling necessary for manufacturing, so suppliers must utilize the Casting and Forging Assistance Request process if needed. The contract includes provisions for covered defense information, and all packaging and documentation must conform strictly to government specifications including the correct unit of issue and quantity per unit pack specified in the order. The required delivery date is January 28, 2027, with an anticipated ship date of February 1, 2027, and the point of contact for inquiries is Brandon Wicker of the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
Federal
TAPE,NUCLEAR ET GR
Solicitation # N0010426QED08
This contract pertains to the procurement of TAPE, NUCLEAR ET GR under solicitation number N0010426QED08, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical office. The solicitation mandates strict compliance with technical, quality, and packaging standards as defined in the Individual Repair Part Ordering Data (IRPOD) and referenced military specifications, with the order of precedence clearly established beginning with contract amendments and descending through schedules, terms, IRPOD, STRs, drawings, and specifications. Contractors must adhere to all cited document revisions unless expressly approved otherwise by the Contracting Officer, and are required to use entire document revisions without mixing parts from different versions. Packaging must comply with MIL-PRF-23199 and MIL-STD-2073 where applicable, and the use of MIL-DTL-24466 green poly bags is permitted only under specific cleanliness control conditions, with fire-retardant materials no longer required. Mercury and mercury-containing compounds are strictly prohibited from contact with supplied hardware. Quality assurance obligations are governed by the IRPOD, requiring contractors to maintain a government-acceptable inspection system and retain full records throughout performance and beyond. Technical data submissions must follow DD Form 1423 guidelines, including defined inspection and acceptance codes, distribution restrictions based on distribution statement codes (A–F), and precise submission schedules tied to contract end-of-contract (EOC) deadlines. Contractors must submit certified reports of test and inspection, as well as cure date certificates, per NAVSUP-WSS-specific sequences DI-QCIC-8872 and DI-MISC-81318, with separate packages required for each unique contract, NSN, and nomenclature combination. All technical documents are accessible only via the locked BPMI e-commerce portal, requiring pre-registration, and hard copies will not be mailed. Pricing is valid for 60 days post-closing date, and full compliance with cybersecurity maturity certification, veteran and disability employment equity, small business representations, priority rating for defense needs, and security prohibitions is mandatory. The contract is issued electronically, and acceptance of the proposal constitutes a binding agreement.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 314999
New
Federal
LEAD WOOL BLANKET
Solicitation # N0010426QED14
The contract pertains to the procurement of Lead Wool Blankets under solicitation N0010426QED14, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical (NAVSUP WSS-MECH) under the Department of Defense. All technical and quality requirements are governed by the Individual Repair Part Ordering Data (IRPOD), drawings, technical data, and referenced military specifications, which must be obtained via the secured BPMI e-Commerce website requiring pre-registration. The contractor must comply with exact revision levels of cited documents unless written approval is granted for alternatives. Order of precedence for resolving conflicts is clearly defined, with contract amendments taking priority over all other documents, followed by schedule, terms and conditions, IRPOD, STRs, drawings, and specifications. Compliance with cleanliness control standards such as MIL-STD-767 and MIL-STD-2041 triggers specific packaging requirements under MIL-PRF-23199, where heat-sealed envelopes are mandated for parts subject to cleanliness controls; the use of MIL-DTL-24466 green poly bags is permitted only under specific conditions, and fire-retardant packaging is no longer required. Mercury or mercury-containing compounds are strictly prohibited from contact with the supplied items. Quality assurance obligations are outlined in the IRPOD, requiring the contractor to maintain a government-acceptable inspection system and preserve all inspection records throughout contract performance and beyond. Delivery must be FOB destination, with pricing valid for 60 days after the closing date unless otherwise specified. The contract mandates compliance with cybersecurity maturity certification, small business set-aside requirements, and priority rating for national defense purposes. Technical data packages must be delivered as specified on DD Form 1423, including detailed submission frequency, approval codes, distribution statements, and pricing groups. A Certificate of Compliance per DI-MISC-81356 must be submitted at the time of delivery for each unique NSN and item nomenclature combination. All contractual documents are considered officially issued upon electronic transmission, and contractor-submitted waivers or deviations must include full technical justification, evaluation of impact on form, fit, and function, and supporting documentation, submitted through the Government Quality Assurance Representative.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details