Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Defense-Compliant Packaging and Labeling

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity involves providing specialized packaging and marking services for prime contractors supporting the Department of Defense under the DLA Weapons Support Land Supply Chain. The selected provider will be responsible for packaging assemblies in strict accordance with ASTM D3951 and RP001 standards, while ensuring all marking and labeling comply with MIL-STD-129. The ultimate goal is to deliver final shipments that are fully packaged, labeled, and ready for immediate transport. The project is categorized under NAICS code 339999 and will be performed in New Cumberland. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026.

General Info

Packaging and marking services for DoD DLA Weapons Support in New Cumberland, PA.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

339999 - All Other Miscellaneous Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-2224.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHAFT ASSEMBLY, SHOULDE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provides specialized packaging and marking services for prime contractors on DLA Weapons Support Land Supply Chain projects. Packages assemblies in accordance with ASTM D3951 and RP001, and performs marking and labeling per MIL-STD-129. Delivers final packaged and labeled shipments ready for transport.

Similar Contracts

Same NAICS industry code

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and labeling for T-Handle components, ensuring all processes adhere to ASTM D3951 for packing and MIL-STD-129 and the DLA Master List of Technical and Quality Requirements for marking and labeling. The contractor is required to use industrial labeling equipment and MIL-SPEC packaging materials to ensure all items are shipment-ready. The final deliverables are to be delivered FOB Origin to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 339999 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Division. Interested parties should note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

ESD/EMI Protective Packaging and Marking ServicesThis subcontract involves providing specialized protective packaging and marking services for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires the application of Department of Defense qualified ESD and EMI protective packaging in strict accordance with MIL-PRF-81705, MIL-STD-2073-1E, and MIL-STD-129 standards, specifically including Special Marking Code 39. All shielding materials used must be compliant with MIL-PRF-81705 to ensure the integrity of the components. The project requires the final packaged and marked components to be delivered to DLA Dist San Joaquin, with the place of performance located in Tracy, California. This effort falls under NAICS code 339999 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Manufacturer of UV-Sensitive Gaskets (NSN 5330-01-714-4508)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Log Tube Assembly SupplierThis subcontract involves the supply of 10 Log Tube Assemblies for prime contractors supporting DLA Fleet Readiness Center projects. The supplier is responsible for manufacturing or procuring Container Research Corp part number 17D015-1 in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance takes place in Cherry Point, and the contractor must adhere to specific quality sampling standards per MIL-STD-1916 or ASQ H1331, packaging requirements under ASTM D3951, and labeling guidelines per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and DFARS cybersecurity reporting regulations. This opportunity falls under NAICS code 339999 and is managed by the Department of Defense. Interested parties must meet the response deadline of October 30, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Plain Oil Seals (NSN 5330-00-485-0788)This subcontract involves the manufacture and supply of 128 precision-manufactured plain oil seals for the DLA Weapons Support Nuclear Reactor Program. The seals must be produced according to NSN 5330-00-485-0788 specifications using either precision machining or molding processes. Compliance with RA001 technical requirements and RP001 packaging standards is mandatory, and all non-accepted government identification must be removed in accordance with RQ011. The project is managed under the Department of Defense and requires delivery of the packaged seals FOB Origin. Performance will take place in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 339999.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Aircraft-Grade Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves the procurement of raw materials and semi-finished components for prime contractors. The scope of work focuses on sourcing and delivering certified aircraft-grade metals, plastics, or upholstery fabrics that strictly adhere to aviation fire, smoke, and toxicity standards. To ensure flight safety and durability, the provider must supply material certifications and maintain ISO 9001:2015 certification. The contract is categorized under NAICS code 339999 and requires the delivery of materials or sub-components to the manufacturer, with the place of performance located in New Cumberland. Interested parties should note the response deadline of October 30, 2026, for this specific supply requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Military-Spec Packaging and Labeling ServicesThis subcontract for Military-Spec Packaging and Labeling Services supports the Department of Defense DLA Weapons Support Maritime Supply Chain. The scope of work involves providing specialized packaging, marking, and labeling for 153 units destined for the DLA Distribution Depot Oklahoma. All work must be performed in strict accordance with RP001 DLA requirements and MIL-STD-129 standards for marking and labeling. To ensure component protection, the contractor must utilize MIL-SPEC anti-corrosion, cushioning, and moisture barrier materials that comply with ASTM D3951. The place of performance for these services is located at Tinker AFB. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services involves providing specialized packaging, preservation, and marking for critical instrumentation intended for prime contractors delivering DLA supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001, specifically utilizing preservation method 41 and cleaning/drying method 1 with mercury-free materials. The final objective is the delivery of properly prepared gages ready for shipment to DLA Distribution San Joaquin. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the contract falls under NAICS code 339999. Performance of these services will take place in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking SupplierThis subcontract involves providing comprehensive packaging materials and services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The scope of work includes the packing, marking, and labeling of items to ensure they are shipment ready for FOB Origin delivery. All operations must be performed at Hill AFB and adhere to strict military and industry specifications. Technical requirements mandate that packing be executed according to ASTM D3951 and RP001 standards, while all marking and labeling must comply with MIL-STD-129. The supplier is required to utilize specialized labeling equipment capable of producing military-standard markings. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, under NAICS code 339999.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Specialized Cushions (NSN 8320-LNCC-3641)This subcontract involves the manufacture or procurement of 50 specialized cushions for prime contractors supporting the Department of Defense DLA Fleet Readiness Center. The deliverables must strictly adhere to NSN 8320-LNCC-3641 and part number 426E004–3 specifications. Quality assurance requires sampling conducted according to MIL-STD-1916 or ASQ H1331, with marking and packaging following RQ017 and RP001/QUP:001 standards. The project is categorized under NAICS code 339999 and will be performed in Cherry Point. Interested parties must respond by October 30, 2026, to fulfill the requirements of the DLA Fleet Readiness Center DLA PSC.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 6 hours ago

DEADLINE

Electronic Shielding Gasket ManufacturerThis subcontract involves the manufacture of 48 electronic shielding gaskets, identified by NSN 5999-01-222-0064, for the DLA Weapons Support Active Devices Division. The selected manufacturer will fabricate these gaskets using conductive elastomers, metals, or composites to provide essential EMI/RFI protection. All production must adhere to strict quality assurance testing standards per MIL-STD-1916 or ASQ H1331, and bare item marking must be completed according to RQ017. Additionally, the use of Class I ozone-depleting substances is strictly prohibited. The project falls under NAICS code 339999 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 2, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Aerospace Kitting and PackagingThis subcontract for MIL-SPEC Aerospace Kitting and Packaging involves performing specialized kitting and packaging services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of actuator components in strict accordance with MIL-STD-2073-1 Appendix D and the marking of shipments per MIL-STD-129. To ensure the integrity of the components, the contractor must utilize specialized cushioning and containment materials while maintaining accurate documentation for all part numbers and National Stock Numbers. The final deliverable consists of three fully packaged and marked Actuator Parts Kits. This project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division, with the place of performance located at Hill AFB. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 339999.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

MIL-SPEC Packaging and International Shipping ServicesThis subcontract for MIL-SPEC Packaging and International Shipping Services supports the DLA Weapons Support Land Supply Chain. The selected provider will perform specialized military-grade packaging, marking, and shipping for prime contractors, ensuring strict adherence to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. A key requirement of the project is the total avoidance of plastics for any wrapping or cushioning materials. The scope of work involves the delivery of two palletized units coordinated via FOB Origin shipping to destinations in Iwakuni, Japan, and Jacksonville, Florida. The units must be appropriately marked for both international and domestic transit. This opportunity falls under NAICS code 561910 and is managed under the Department of Defense.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Belt-Chain Tension Adjusting Device SupplierThis subcontract involves the supply of two belt-chain tension adjusting devices for prime contractors supporting the DLA Weapons Support Land Supply Chain. The supplier is responsible for manufacturing or sourcing devices that strictly adhere to NSN 2990-01-141-5776 specifications. The agreement requires full compliance with the DLA Master List of Technical and Quality Requirements (RA001) and the Buy American/Balance of Payments Program under DFARS 252.225-7001. This procurement is categorized under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors delivering supply contracts for the DLA Weapons Support Land Supply Chain. The scope of work involves the specialized marking, packaging, and palletization of 2,500 units destined for DLA Distribution DDSP New Cumberland. All operations must adhere to strict military and industry standards, specifically utilizing MIL-STD-129 for shipment marking, ASTM D3951 for non-hazardous commercial packaging, and RP001 standards for palletization. The project requires the use of MIL-SPEC marking equipment and materials compliant with ASTM D3951. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026, for this Department of Defense requirement categorized under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Protective Dust and Moisture Seal PlugsThis subcontract involves the manufacture of 2,500 protective dust and moisture seal plugs and caps for prime contractors supporting DLA supply contracts. The components must be fabricated to NSN 5340-01-146-9729 dimensions using precision molding or machining of specialized plastics, rubbers, or polymers. All production must adhere to the Buy American Act and Berry Amendment, with quality assurance sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project is managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, with performance taking place in New Cumberland. Interested parties must note the response deadline of November 2, 2026. The contract falls under NAICS code 326199 and requires the delivery of 2,500 finished seal plugs.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Preformed O-Rings (NSN 5331008079637)This subcontract involves the manufacture or procurement of 89 preformed O-rings matching NSN 5331008079637 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is required to apply Special Marking Code 32 and ensure all marking adheres to MIL-STD-129. Packaging must be completed in accordance with MIL-STD-2073-1E, RP001, and IP025 standards, utilizing specific cushioning and dunnage to ensure product integrity. The final deliverables are to be shipped to the DLA Distribution DISP New Cumberland Facility in New Cumberland, Pennsylvania. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

General Warehousing and Storage

POSTED

about 6 hours ago

DEADLINE

Specialized Alloy Supply for Actuating Pistons

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 6 hours ago

DEADLINE

Precision Machining of Linear Actuating Cylinder Pistons

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves the specialized packaging, sealing, and marking of rubber O-rings to ensure they are ready for FOB Origin shipment. Specifically, the contractor must seal components in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1, while applying all necessary markings per MIL-STD-129 and MIL-STD-2073-1E. The project is managed under NAICS code 561910 for the Department of Defense and will be performed at Robins Air Force Base. Interested parties should note the response deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

High-Performance O-Ring Manufacturer (NSN 5331-00-459-9469)This subcontract involves the precision manufacture and delivery of 1,258 O-rings for the Department of Defense under the DLA Weapons Support Land Supply Chain. The components must be produced according to NSN 5331-00-459-9469 and the DLA Master List of Technical and Quality Requirements, with a strict mandate that all materials are asbestos-free. To ensure regulatory compliance, the manufacturer must adhere to the Berry Amendment and the Buy American Act. Eligible providers are required to hold PRI QML or QPL accreditation to qualify for the project. Performance will take place at Robins Air Force Base, with a response deadline set for November 2, 2026. The contract falls under NAICS code 326199 and is intended for prime contractors supporting these specific land supply chain operations.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the packaging of items in accordance with ASTM D3951 and RP001 standards, utilizing military-specification crates and moisture barriers. Additionally, the contractor must ensure all identification marking complies with MIL-STD-129 and MIL-STD-130N(1) regulations. The project culminates in the delivery of six fully packaged assemblies ready for shipment to DLA Distribution Red River. Performance will take place in Texarkana, Texas, under NAICS code 488510. Interested parties should note the response deadline of November 2, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Supply of Aerospace-Grade Alloys for Drive ShaftsThis subcontract involves the supply of aerospace-grade alloys and semi-finished components for drive shafts to support prime contractors under the DLA Weapons Support Land Supply Chain. The scope of work focuses on providing high-strength alloys and flexible couplings that strictly adhere to Basic Drawing NR 55717 13025094 specifications. All certified raw materials must be delivered directly to the manufacturer. To ensure quality and regulatory adherence, the contract mandates full compliance with the Berry Amendment and requires the submission of Mill Test Reports for complete material traceability. Performance for this project is centered in Texarkana, Texas, under NAICS code 331210. The response deadline for this opportunity is November 2, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS