Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Defense-Compliant Packaging and Labeling Services

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the provision of military-compliant packaging, preservation, and labeling services strictly in accordance with MIL-STD-129, ensuring all items are prepared for storage and transport under Department of Defense standards. Hazardous materials must be handled, marked, and documented in alignment with FED-STD-313 or TQ IP025, requiring strict adherence to safety protocols and regulatory documentation. Compliance with DLA RP001 is mandatory, covering the full lifecycle of packaging and labeling processes to meet defense supply chain requirements. Services are to be performed at the designated location in New Cumberland, Pennsylvania, with zip code 17070-5002, and the work is classified as a subcontract under NAICS code 424950. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with all submissions expected to meet stringent defense logistics standards without deviation.

General Info

Military packaging and labeling per MIL-STD-129, FED-STD-313, DLA RP001 at New Cumberland, PA, due August 14, 2026

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

424950 - Paint, Varnish, and Supplies Merchant WholesalersView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide military-compliant packaging, preservation, and labeling per MIL-STD-129, including hazardous materials handling per FED-STD-313 or TQ IP025, with DLA RP001 compliance.

Similar Contracts

Same NAICS industry code

Seeding and Grass Straw ApplicationThe contract entails the supply and installation of a native seed mix and grass straw erosion control blankets over a three-acre site to stabilize soil and promote the establishment of native vegetation. The work is focused on erosion prevention and ecological restoration, with the goal of ensuring long-term soil integrity and vegetation success in the designated area. The scope includes proper application techniques to secure the straw blankets and evenly distribute the seed mix for optimal germination and ground coverage. This subcontract is issued by the California Department of Transportation under NAICS code 424950, with a response deadline of August 20, 2026, and was posted on August 4, 2026. Performance is scheduled to take place in Sacramento, California, and the contract is part of broader infrastructure or environmental mitigation efforts managed by the state transportation agency. Bidders must be prepared to comply with state-specific environmental standards and planting requirements, and all terms are governed by California’s procurement protocols applicable to subcontracting under this solicitation.

California Department of Transportation

POSTED

about 14 hours ago

DEADLINE

Plant Shelter and Mulch Pad InstallationThe contract calls for the supply and installation of 370 plant shelters and 290 mulch pads, all constructed from biodegradable materials and filled with a specified mulch mix designed to safeguard newly planted vegetation from herbivory and soil erosion. The work is intended to support ecological restoration efforts by ensuring plant survival during the critical early growth phase, with emphasis on environmental sustainability through the use of biodegradable components that will naturally decompose without requiring removal or long-term maintenance. All materials and methods must meet established environmental and performance standards to ensure effectiveness and compliance with ecological best practices. This subcontract, issued by the California Department of Transportation, is posted under NAICS code 424950 and has a response deadline of August 20, 2026. The place of performance is located in Sacramento, California, indicating the project will occur within or near state transportation corridors, likely as part of landscape stabilization or habitat mitigation efforts tied to infrastructure projects. While no specific set-aside status is disclosed, the contract is structured as a subcontract and falls under a broader procurement effort managed by the state agency. Interested parties must respond by the stated deadline to be considered, and all deliverables must align with the technical and material requirements outlined in the solicitation.

California Department of Transportation

POSTED

about 14 hours ago

DEADLINE

Landscape Material SupplySlayden Constructors, Inc. is seeking qualified small businesses to supply topsoil, mulch, compost, seeds, native plants, and erosion control materials for landscaping and revegetation projects under a subcontract opportunity posted on August 4, 2026, with a response deadline of August 13, 2026. The solicitation is designated as a Small Business Set Aside, open to SBA-certified categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, with additional eligibility extended to Alaskan Native Corporations. The North American Industry Classification System code for this opportunity is 424950, indicating a focus on wholesale trade of agricultural supplies. All materials must meet specified quality standards for use in environmental restoration and landscape development, with performance locations to be determined as part of ongoing project needs. Interested vendors must be prepared to demonstrate capacity for timely delivery, compliance with environmental specifications, and adherence to small business certification requirements.

Slayden Constructors, Inc.

POSTED

DEADLINE

Supply of Industrial Paint Remover (NSN 8010014852312)The contract requires the procurement and delivery of two gallons of industrial paint remover identified by NSN 8010014852312 to the USS THEODORE ROOSEVELT CVN 71 under a firm-fixed-price delivery order. The product must comply with all applicable federal specifications and is to be delivered FOB destination no later than August 17, 2026. The acquisition is managed by the Defense Logistics Agency under the Department of Defense and falls under the NAICS code 424950 for other miscellaneous durable goods merchant wholesalers. The delivery is part of a subcontract arrangement and does not include any set-aside provisions. All terms are firm and binding, with the responsibility for timely and compliant delivery resting entirely with the supplier.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Paint Thinner (Chemical Distribution)

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Preservation, and MarkingThe contract encompasses the supply and application of military-compliant packaging materials and services designed to protect and preserve defense equipment and components during storage and transit. It requires strict adherence to MIL-STD-2073 and MIL-STD-129 standards, ensuring proper vacuum sealing, incorporation of vapor corrosion inhibitors, use of desiccants to control moisture, and accurate labeling for uniform identification and logistics tracking. The scope involves end-to-end packaging solutions tailored for military environments, with an emphasis on durability, environmental resistance, and compliance with federal defense specifications. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 424950 indicating wholesale trade in machinery and equipment supplies. The contract was posted on August 3, 2026, and is identified by the contract number SPE7MX26D5022 with delivery order SPE7M126F4693. The place of performance and specific location details are not listed, but the work is expected to support U.S. military logistics operations globally, with all materials and processes subject to rigorous quality control and documentation requirements in alignment with DLA’s procurement standards.

Defense Logistics Agency

POSTED

DEADLINE

Epoxy Coating Kit SupplyA single NSN-coded epoxy coating kit, identified as 8010013470916, is being supplied and delivered to the USS JOHN CANLEY (ESB 6) in San Diego, California, under FOB Destination terms, meaning title and risk transfer to the government upon arrival at the specified destination. The contract is issued as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 424950 for chemical and allied products merchant wholesalers. Compliance with DPAS ratings is required, indicating the priority placement of this order within federal procurement systems to ensure timely fulfillment for national defense needs. The solicitation was posted on August 3, 2026, and the award reference includes contract number SPE8ES24D0005 with delivery order SPE8ES26F73FJ and contract line item number 296601, though no specific solicitation number or set-aside details are provided. Delivery is expected to occur at the vessel’s homeport, with no additional point of contact or geographic details listed beyond the place of performance.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Paint Thinner (NSN: 8010001605787)The contract requires the supply and delivery of 4,000 gallons of commercial-grade paint thinner compliant with NSN 8010001605787 to a military facility located in Gulfport, Mississippi. The item is intended for use by the Department of Defense and falls under the NAICS code 424950, which corresponds to chemical and allied products merchant wholesalers. Though the solicitation number is not provided, the contract is classified as a subcontract and is managed by the Defense Logistics Agency. Performance must occur at the designated military site in Gulfport, with no additional details provided regarding delivery timelines, packaging, or inspection requirements. The contract was posted on August 3, 2026, and can be referenced via the provided DIBBS link, though no point of contact or specific office address is listed in the data.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Paint Remover Supply (NSN 8010001817568)The contract involves the supply of 10 gallons of commercial paint remover identified by the National Stock Number 8010001817568 under a firm-fixed-price delivery order, ensuring a predetermined cost with no adjustments for fluctuations in expenses. The item is federally cataloged and must be delivered under FOB Destination terms, meaning the seller bears all costs and risks until the goods reach the specified delivery point. The procurement is classified under NAICS code 424950, which corresponds to wholesale trade of chemicals and allied products, and is issued as a subcontract by the Defense Logistics Agency, a component of the Department of Defense. The contract was posted on August 3, 2026, and is administered through the DIBBS system, with the specific delivery order referenced as SPE8ES26F73JK under the parent contract SPE8ES24D0005. No set-aside provisions or specific performance location details are provided, and no point of contact information is included in the contract data.

Defense Logistics Agency

POSTED

DEADLINE

Sustainable Materials Supply for SignageThe contract titled Sustainable Materials Supply for Signage seeks the provision of bio-based, mercury-free, and non-toxic raw materials specifically for use in the production of signs and medallions. It is structured as a subcontract with a NAICS code of 424950, indicating a focus on wholesale trade of miscellaneous durable goods, and is administered by the Michigan agency under Lansing. The solicitation was posted on August 3, 2026, with a strict response deadline of August 5, 2026, requiring timely submission from interested suppliers. The materials must meet stringent environmental and safety criteria, emphasizing sustainability and the elimination of hazardous substances such as mercury, which aligns with broader efforts to reduce environmental impact and promote safer manufacturing practices. All materials are expected to be suitable for use in signage applications without compromising durability, clarity, or compliance with regulatory standards. The place of performance and point of contact details are not specified, but the procurement is accessible via the Michigan public procurement portal for further submission instructions and technical requirements.

POSTED

DEADLINE

in about 13 hours

PAINT & BODY SUPPLIES

Solicitation # RFQ-MNT27-06

The contract solicitation titled PAINT & BODY SUPPLIES under solicitation number RFQ - MNT27-06 is issued by the Procurement Department of OmniTrans in California and seeks vendors to supply a broad range of body shop materials. The scope includes all necessary supplies for body shop operations, explicitly extending beyond the items listed on the attached bidding form, allowing flexibility for vendors to propose comprehensive and competitive offerings. Responses are due by August 28, 2026, at 10:00 PM Pacific Time, with the solicitation posted on August 3, 2026, and open to eligible suppliers under a State, Local, or Educational (SLED) government procurement process. All work under this contract is expected to support the agency’s operations in California, with no specific city or zip code mandated for performance. Primary point of contact for inquiries is Rick Barone, reachable via email at rick.barone@omnitrans.org or by phone at 909-379-7204. The full solicitation and submission details can be accessed through the provided vendor portal link, and while no NAICS code or set-aside type is specified, vendors are expected to comply with all applicable state and federal procurement regulations governing SLED agencies.

Procurement Department of OmniTrans

POSTED

DEADLINE

Supply of Paint Remover (NSN 8010001429273) for USS GEORGE H.W. BUSH (CVN 77)The contract requires the supply of 24 pints of paint remover identified by NSN 8010001429273, compliant with Department of Defense specifications, to be delivered FOB destination to the USS GEORGE H.W. BUSH (CVN 77) no later than August 17, 2026. The item is intended for maintenance and surface preparation purposes aboard the aircraft carrier and must meet all applicable military standards for performance and safety. The contract is categorized as a subcontract under NAICS code 424950, which pertains to wholesale trade of chemicals and allied products, and is managed by the Defense Logistics Agency under the Department of Defense. Delivery logistics are governed by FOB destination terms, meaning the supplier bears all risks and costs until the product is received at the vessel’s designated location. The solicitation was posted on August 2, 2026, and the award details are accessible through the DIBBS system via the provided reference link.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

RESISTOR, FIXED, WIRE

Solicitation # SPE7M5-26-T-367E

This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONNECTOR BODY, RECE

Solicitation # SPE7M5-26-T-367P

This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367F

The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

RADOME, POLARIZER

Solicitation # SPE7M5-26-Q-0829

The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-367K

The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-367D

This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SEMICONDUCTOR DEVICE, T

Solicitation # SPE7M5-26-T-366Y

The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.

Semiconductor and Related Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367G

This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M5-26-Q-0830

The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

CLAMP, CABLE, ELECTRI

Solicitation # SPE7M5-26-T-366W

The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.

Other Building Material Dealers

POSTED

about 13 hours ago

DEADLINE

SWITCH, SEQUENCING

Solicitation # SPE7M5-26-T-367L

This contract solicitation, identified by SPE7M5-26-T-367L, is for 185 units of SWITCH, SEQUENCING with NSN 5930-00-246-9757, under a Women-Owned Small Business Set-Aside, and requires delivery within 93 days after order. Mandatory source inspection must occur at the manufacturer’s facility, and surplus materials are not acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item must conform to both the cited technical data and the specified part number, and vendor control drawings apply. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract mandates CMMC Level 2 certification by a third-party assessment organization for cybersecurity compliance. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA authorization may access restricted technical data. The contract is managed by the Department of Defense’s Active Devices Division, with performance to be delivered to Jacksonville, Florida, and inquiries directed to Lea Dawn Robertson.

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M5-26-T-366U

This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE