Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Defense Component Testing and Inspection Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses non-destructive testing quality verification and government-conducted origin inspections specifically for critical safety item aerospace components, ensuring adherence to stringent defense standards. Services are provided under a subcontract arrangement with the Defense Logistics Agency, a component of the Department of Defense, and are classified under NAICS code 541380 for engineering services. The work is essential for verifying the integrity, authenticity, and compliance of components used in mission-critical aerospace systems, where failure is not an option. The contract does not specify a place of performance or point of contact, indicating that activities may occur across multiple secured facilities under DLA oversight. All inspections and tests must align with federal regulations and defense-specific requirements to guarantee component provenance and operational reliability.

General Info

Non-destructive testing and origin inspections for aerospace safety components under DLA oversight, ensuring defense compliance and reliability.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A525F111B.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLAP, WING LANDING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → Defense Logistics Agency
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Non-destructive testing (NDT), quality verification, and government-conducted origin inspection for Critical Safety Item aerospace components.

Similar Contracts

Same NAICS industry code

NAICS: 541380
New
Transient Condition & Pressure TestingThis subcontract opportunity, titled Transient Condition and Pressure Testing, is issued by Garney Companies, Inc. for specialized testing services on Charles County Government projects. The selected contractor will be responsible for performing pressure and transient testing for prime contractors, specifically focusing on pump shutdowns and monitoring pressure at the flowmeter vault to ensure levels remain above 15 psig. The final deliverable for this engagement is a comprehensive testing and commissioning report that verifies transient stability. This opportunity is specifically set aside for SBA certified Women-Owned Small Businesses and Disadvantaged Business Enterprises under NAICS code 541380. Interested parties must submit their responses by the deadline of November 9, 2026.
Garney Companies, Inc.

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
SLED
Fire Flow Testing and Hydrant/Valve Inspection Services
Utility Services Department

POSTED

about 11 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
SLED
Fire Flow Testing Services
Solicitation # 121589
WSSC Water is soliciting bids for Fire Flow Testing Services to support the planning, locating, inspection, and testing of approximately 46,000 fire hydrants and associated water distribution components across various pressure zones in Maryland. The scope of work includes performing fire flow tests, hydrant and valve inspections, managing water shutdowns, and implementing traffic control for residential, county, and state roads. The contract is structured with a one-year base term and four optional one-year extensions. Award will be made to a single, responsive, and responsible bidder based on the lowest total price, provided they meet strict minimum qualifications, including five years of prime experience in fire flow testing, the ability to deploy at least two simultaneous crews, and the employment of at least one crew member with a Maryland Water Distribution System Operator D-1 license. Bidders must submit a comprehensive set of documentation via the eProcurement portal by November 30, 2026, including a safety and health program questionnaire, a certificate of insurance, and various certifications regarding non-discrimination and Iran investment activity. Technical requirements include the submission of a detailed QA/QC plan and an equipment list featuring specialized tools like Pitot gauges and dechlorination equipment. The contract emphasizes compliance with AWWA and MDE standards, specifically regarding the discharge of chlorinated water. Notably, the agreement excludes the COVID-19 pandemic from Force Majeure claims and requires strict adherence to security background investigations for accessing sensitive facility plans. Payment is processed via ACH or procurement credit card within 30 days of accepted delivery, with a potential award factor based on prompt payment discounts.
Utility Services Department

POSTED

about 11 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
SLED
Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.
California Department of General Services

POSTED

about 12 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541380
New
SLED
Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.
California Department of General Services

POSTED

about 12 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541380
New
SLED
Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.
California Department of General Services

POSTED

about 12 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541380
New
SLED
Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.
California Department of General Services

POSTED

about 12 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541380
New
SLED
Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.
California Department of General Services

POSTED

about 12 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541380
New
SLED
Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.
California Department of Fish & Wildlife

POSTED

about 12 hours ago

DEADLINE

in 19 days
View Details
NAICS: 541380
New
SLED
MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT
Solicitation # RESD-PMDB 2026-12
The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.
California Department of General Services

POSTED

about 12 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541380
New
SLED
Invitation For Bid P2675010, Analytical Testing Services
Solicitation # P2675010
The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.
California Department of Fish & Wildlife

POSTED

about 12 hours ago

DEADLINE

in 19 days
View Details
NAICS: 541380
New
SLED
Geotechnical Engineering & Testing
Saint Mary's County Metropolitan Commission

POSTED

about 15 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 561910
New
DIBBS
MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.
All Other Miscellaneous Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335131
New
DIBBS
Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.
Residential Electric Lighting Fixture Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488330
New
DIBBS
Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.
Navigational Services to Shipping

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336390
New
DIBBS
Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325510
New
DIBBS
Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.
Paint and Coating Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332721
New
DIBBS
Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.
Precision Turned Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 323113
New
DIBBS
Custom Decal Production (NSN 7690-01-651-3617)
Commercial Screen Printing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
DIBBS
Multi-Parameter Petroleum Laboratory Testing (CLINs 0002–0007)
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
JP5 Fuel Quality Testing (CLIN 0001)
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Government First Article Testing (FAI/First Article Inspection)
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Production Lot Testing Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
First Article Testing Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Product Verification Testing (PVT) and Inspection Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Quality Inspection & Testing Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Product Verification Testing (PVT) Coordination and Sample Management
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Military Item Marking and UID Labeling Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Quality Assurance and Compliance Testing Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Quality Assurance and Inspection Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
DIBBS
Hazardous Materials Testing & Characterization Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS