Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Defense Fastener Manufacturing & Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Fastener Manufacturing and Supply subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the production and delivery of hook fastener tape identified by NSN 5325-01-609-1574. The contractor is required to ensure all materials are compliant with strict military specifications, maintaining a fully traceable supply chain and rigorous quality control standards. Classified under NAICS code 339993, this agreement focuses on the specialized manufacture of these fasteners to meet defense requirements. The contract was posted on August 17, 2026, and is managed through the DIBBS system to ensure the procurement of high-quality components for military use.

General Info

DLA subcontract for manufacturing and supplying military-specification hook fastener tape via DIBBS.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

339993 - Fastener, Button, Needle, and Pin Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-R-X943.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FASTENER TAPE, HOOK

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of hook fastener tape (NSN: 5325-01-609-1574) compliant with military specifications, including traceable supply chain and quality control.

Similar Contracts

Same NAICS industry code

Solicitation # SPE4A6-27-T-0542

Solicitation SPE4A6-27-T-0542 is a fixed-price request for 149,000 machine keys (NSN 5315-01-531-4476) issued by the DLA Weapons Support ASC Commodities Division. This procurement is specifically set aside for Service-Disabled Veteran-Owned Small Businesses certified by the Small Business Administration. The items are designated as critical application items and must conform to Technical Data Package Rev A Gen 1 per Basic Drawing NR 1NUW7 11581697, Revision E. Delivery is required within 120 days after order to the DLA Distribution San Joaquin facility in Tracy, California, with a need ship date of February 12, 2027. The contract mandates strict quality and compliance standards, requiring manufacturers to maintain an inspection system complying with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Technical data for this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation incorporates CMMC Level 2 cybersecurity requirements and strict adherence to the Buy American Act and Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE4A6-27-T-0378

Solicitation SPE4A6-27-T-0378, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of one screw thread insert, identified by NSN 5325016339318. The requirement specifies a delivery timeline of 20 days after order, with an original required delivery date of September 28, 2026. Delivery is to be made to the 0710 CS BN CO A Distribution center at Fort Polk, Louisiana, using the fastest traceable means, specifically prohibiting the use of parcel post. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and sampling methods per MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment requests. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Additionally, the solicitation explicitly prohibits the use of additive manufacturing processes for the supplied parts unless specifically authorized.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PIN, TAPERED, PLAIN

Solicitation # SPE4A6-27-Q-0026

Solicitation SPE4A6-27-Q-0026 is a firm-fixed-price request for 51 tapered plain pins (NSN 5315-01-676-8175) issued by the DLA Weapons Support ASC Commodities Division. This procurement is designated as a Navy Identified Critical Safety Item, requiring strict adherence to quality standards, including SAE AS9100 for manufacturers. Delivery is required within 60 days after order to DLA Distribution Cherry Point, North Carolina. The government will award the contract based on best value, evaluating cost or price, quoted delivery, and past performance via the Supplier Performance Risk System (SPRS), with non-price factors weighted approximately equal to price. The contract mandates rigorous compliance with technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Each unit pack must be marked with the part number, contractor and manufacturer CAGE codes, and lot or serial numbers. Inspection and acceptance will occur at the source. Due to the nature of the technical data, this acquisition is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by October 9, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

RFQ 1-Year Employee Service Pins Qty 200

Solicitation # BD-27-1053-1053C-CSR-133936

The Massachusetts Veterans Home at Holyoke, through the Central Supply department, has issued Request for Quote BD-27-1053-1053C-CSR-133936 for the procurement of 200 employee service pins. These pins are intended for one-year service recognition and should measure approximately 1.25 by 1.25 inches. This is a closed, invitation-only solicitation eligible for the Small Business Purchasing Program. Interested vendors must submit their quotes by the bid opening deadline of October 12, 2026. Proposals are required to include unit pricing for the 200 pins, as well as bulk pricing options and the minimum production quantity required by the manufacturer. The primary point of contact for this procurement is Purchaser Anibal Rivera.

1053CENTRALSUPPLY - Central Supply

POSTED

DEADLINE

Supply of Blind Rivets (Critical Application Item)This subcontract involves the supply of 250 blind rivets, specifically Huck International part number OB100-T05-10D, for prime contractors working on DLA Weapons Support ASC projects. These fasteners are designated as Critical Application Items and must meet all specified technical requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 339993. The contractor must adhere to strict regulatory standards, including DFARS 252.204-7012 and NIST SP 800-171. Additionally, the contract mandates compliance with prohibitions regarding the use of hexavalent chromium and restrictions on acquisitions from specific foreign military companies.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7LX-26-R-0103

Solicitation SPE7LX-26-R-0103 is a Firm Fixed Price request for proposal issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of molded pins, NSN 2530-01-630-3036. While the initial quantity was listed as 16,750 units, Amendment 0001 increased the purchase request quantity to 31,729 units, with an additional follow-on basic option quantity of 1,771 units. The required delivery date is 237 days after the date of award, with inspection and acceptance occurring at the destination, DLA Distribution Red River in Texarkana, Texas. The government will utilize a best-value trade-off process to make award decisions, evaluating factors including price, past performance via SPRS, proposed delivery, and socioeconomic support. Technical compliance requires adherence to specific source control drawings and the Technical Data Package Rev A Gen 1. Contractors must meet CMMC Level 1 Self certification and comply with DFARS cybersecurity and safeguarding requirements for covered defense information. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, with specific protocols for Product Verification Testing samples if invoked by the contracting officer.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacturing of Packing Retainers (NSN 5330006247998)This subcontract involves the manufacture of 133 Packing Retainers under NSN 5330006247998 for prime contractors supporting DLA and US Air Force procurement projects. The work is managed by the Department of Defense Fluid Handling Division with performance taking place at Tinker AFB. All fabricated parts must strictly adhere to FED-STD-313, which prohibits the use of asbestos. The contractor is required to maintain AS9100 and CMMC Level 2 certifications to ensure quality and security standards. Additionally, the project demands compliance with Air Force Critical Safety Item standards and requires formal engineering source approval from the Government Design Control Activity.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE1C1-26-R-0056

Solicitation SPE1C1-26-R-0056 is a 100 percent small business set-aside for an Indefinite Delivery/Indefinite Quantity firm fixed price contract to manufacture and supply AGSU Buckles, NSN 8315-01-683-9267, for the Department of Defense. The contract features a guaranteed minimum quantity of 60,000 units, an annual estimated quantity of 240,000 units per tier, and a maximum combined quantity of 1,495,000 units across five 12-month price tiers. All items must be manufactured in accordance with MIL-DTL-1963K dated September 4, 2019, utilizing copper base alloys and specific plating finishes. Deliveries are FOB Destination to the Pendergrass Distribution Center in Georgia, with a lead time of 120 days for the first order and 90 days for subsequent orders, capped at 9,500 pairs per month. Award will be determined using Best Value Source Selection Trade-Off Procedures, where non-cost factors are significantly more important than price. The primary evaluation factor is the submission of three Product Demonstration Models per item to verify manufacturing, visual, and dimensional requirements, though material shade will not be evaluated for these models. Other key evaluation criteria include past performance regarding recency, relevancy, and quality. Technical requirements include strict adherence to MIL-STD-129R for marking, the use of 13-digit NSN and 12-digit UPC barcodes on 100-pound bleached sulfate tags, and compliance with ISPM 15 for wood packaging materials. Proposals must be submitted via the DLA Internet Bid Board System by October 24, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

PIN, WARNING STREAME

Solicitation # SPE8EF-26-Q-0085

Solicitation SPE8EF-26-Q-0085 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment office for the procurement of eight ground safety warning streamer pins, identified by NSN 1730-01-063-9717. The items are required to be delivered within 60 days after receipt of order with inspection and acceptance occurring at the point of origin. Quotes must be submitted via the DLA Internet Bid Board System by October 13, 2026, and must remain valid for 90 days. The contract mandates strict adherence to MIL-STD-129 for marking and requires the use of the Wide Area WorkFlow system for all invoicing and receiving reports. Compliance with the Buy American and Balance of Payments Program is required, and offers will be evaluated based on fair and reasonable pricing. Technical data associated with this procurement is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation incorporates cybersecurity requirements including CMMC Level 2 self-assessment or third-party certification and basic safeguarding of covered contractor information systems.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Plastic Insignia Button Production (MIL-B-20289D)This subcontract involves the manufacture and supply of plastic insignia buttons for prime contractors working on USMC uniform projects. The producer must utilize plastic molding equipment and tooling to ensure all buttons conform to MIL-B-20289D standards for dimensional accuracy and durability. To qualify, the provider must maintain quality-management certifications and provide necessary material certifications. The Department of Defense is the overseeing agency for this requirement, which falls under NAICS code 3399993. All finished products must be packaged and preserved against contamination and damage prior to delivery. The response deadline for this opportunity is October 12, 2026.

POSTED

DEADLINE

Plastic Insignia Buttons

Solicitation # M67854-26-I-5429

The United States Marine Corps is conducting market research through Request for Information M67854-26-I-5429 to identify capable manufacturers and suppliers for plastic insignia buttons. All products must conform to military specification MIL-B-20289D and accurately reproduce the Marine Corps Eagle, Globe, and Anchor insignia. The government is specifically seeking sources with existing tooling, production capacity, and established quality-control processes to ensure dimensional accuracy, durability, and consistent appearance. Potential requirements include the provision of representative samples, specifically one gross each of Type II 27 ligne and Type I 40 ligne buttons. This is not a formal solicitation, and no contract will be awarded based solely on this request. Interested parties must submit a response of no more than ten pages to Cheryl Dunn by October 12, 2026. Submissions should include the company's UEI, CAGE code, business size, socioeconomic status, and NAICS code 339993. Additionally, respondents must provide a capability statement, details on their tooling and government experience, estimated lead times for production, and information regarding quality-management certifications and material documentation.

POSTED

DEADLINE

General NSN Parts Supply (27,327 Line Items)

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

COATING COMPOUND, NO

Solicitation # SPE8ES-27-T-0061

Solicitation SPE8ES-27-T-0061 is a fixed-price contract issued by the Defense Logistics Agency Troop Support for the procurement of 10 gallons of coating compound (NSN 8010-01-720-1012). The supplies are to be delivered FOB Destination to the USS BOXER LHD 4 with a required delivery date of June 23, 2025, and a delivery window of 20 days after order. The item is classified as a Type I material with a non-extendable shelf life of 24 months and must comply with specific technical standards, including TT-P-28J and MIL-STD-129R. Due to the hazardous nature of the coating compound, the contractor must adhere to strict safety and packaging regulations. This includes submitting Safety Data Sheets and Hazardous Communication Standard labels for approval prior to award in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials shipping under IP025. Additionally, the contract mandates compliance with the Buy American Act and the Berry Amendment, requires electronic invoicing via Wide Area Workflow, and incorporates standard FAR and DFARS clauses regarding cybersecurity, trafficking in persons, and the prohibition of hexavalent chromium.

Paint and Coating Manufacturing

POSTED

about 8 hours ago

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-27-T-0145

Solicitation SPE7MC-27-T-0145 is a fixed-price request for quotations issued by the Defense Logistics Agency Weapons Support Maritime Hardware/Electrical for the procurement of two flow control valves, identified by NSN 4820016972094 and Carrier Corp part number 17-40002-01. This critical application item is destined for the USNS Miguel Keith T-ESB #5 in San Diego, California. The required delivery date is August 14, 2025, with a delivery window of 20 days after order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled per MIL-STD-129, and the use of Class I ozone-depleting chemicals is strictly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Offers must be submitted via DIBBS, and items produced using additive manufacturing are ineligible for award unless specifically authorized.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

CABINET, STORAGE

Solicitation # SPE8E5-27-Q-0010

Solicitation SPE8E5-27-Q-0010 is a firm fixed price request for the procurement of one storage cabinet, NSN 7125-01-627-0290, issued by the Defense Logistics Agency Troop Support, Construction and Equipment office. The requirement specifies a delivery timeline of 30 days after order, with both inspection and acceptance occurring at the destination. Delivery is directed to military consignees in North Carolina, specifically in McLeansville and Greensboro. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must comply with RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses covering small business representations, cybersecurity safeguarding of covered defense information, and prohibitions on certain foreign telecommunications equipment. Quotations are due by October 14, 2026.

Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

about 8 hours ago

DEADLINE

AMPLIFIER, RADIO FREQUE

Solicitation # SPE7M5-26-Q-1045

POSTED

about 8 hours ago

DEADLINE

TAILPIECE, VALVE

Solicitation # SPE7MC-27-T-0144

Solicitation SPE7MC-27-T-0144, issued by the Defense Logistics Agency Weapons Support Maritime Hardware/Electrical, is for the procurement of one valve tailpiece, identified by NSN 4820-01-422-7182. The item is destined for the USS Theodore Roosevelt CVN 71, with delivery required within 20 days after order. The contract specifies FOB Destination for both inspection and acceptance. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. The procurement is subject to various federal regulations, including the Buy American and Balance of Payments Program for quotes above the micro-purchase threshold and NIST SP 800-171 cybersecurity assessment requirements. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

EPOXY COATING KIT

Solicitation # SPE8ES-27-T-0060

Solicitation SPE8ES-27-T-0060 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one Epoxy Coating Kit (NSN 8010-01-302-3609). The required product is a gray, three-coat system conforming to MIL-DTL-24441, Formula 157, with a maximum VOC of 340 g/L. Each kit must consist of Parts A and B to produce 37.9 liters (10 gallons), delivered in two 5-gallon open-head, re-sealable pails. The item is classified as a Type II shelf-life item with a 24-month duration, and the contractor must ensure that at least 85 percent of this shelf life remains upon receipt by the government. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and labels consistent with 29 CFR 1910.1200. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, with specific requirements for lot or batch number identification. Delivery is set for destination in Jefferson City, Missouri, with a required delivery date of October 1, 2026, and a delivery window of 20 days after order. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with CMMC Level 2 self-assessment and Buy American Act regulations. Inspection and acceptance will occur at the destination per FAR 52.246-1.

Paint and Coating Manufacturing

POSTED

about 8 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-27-Q-0032

POSTED

about 8 hours ago

DEADLINE

in about 16 hours

Solicitation # SPE8E6-27-T-0164

Solicitation SPE8E6-27-T-0164 is a fixed-price request for quotation issued by the Defense Logistics Agency Troop Support, Construction and Equipment office for the procurement of one unit of NSN 7690-01-730-8970. The item is associated with part numbers OX43903-13 from Oxley Inc Aerospace Div and S842-349902-13 from The Boeing Company. Delivery is required within five days after order to Tinker AFB, Oklahoma, with shipping to be executed via the fastest traceable means. The contract specifies FOB Origin terms, while inspection and acceptance are conducted at the destination per FAR 52.246-1. The item is classified as a Type I Code M item with a non-extendable shelf life of 24 months, requiring specific shelf life marking in accordance with MIL-STD-129. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements RP001, with a directive to avoid plastics for wrapping or cushioning where possible. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and safeguarding of covered defense information. Offerors must submit quotes via DIBBS and provide necessary small business representations and certifications.

Commercial Printing (except Screen and Books)

POSTED

about 8 hours ago

DEADLINE

CURTAIN, BLACKOUT

Solicitation # SPE8E6-27-T-0169

Blind and Shade Manufacturing

POSTED

about 8 hours ago

DEADLINE

POLYURETHANE COATIN

Solicitation # SPE8ES-27-T-0058

Paint and Coating Manufacturing

POSTED

about 8 hours ago

DEADLINE

CLOTH, CLEANING

Solicitation # SPE8E5-27-T-0163

Broom, Brush, and Mop Manufacturing

POSTED

about 8 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-27-T-0056

Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS