Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Defense-Grade Boot Supply (NSN 5930016658689)

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of one unit of a defense-grade dust and moisture boot certified to meet DLA technical specifications, with all packaging and labeling adhering to military standards. The item is identified by NSN 5930016658689 and must be delivered under FOB origin terms, meaning the seller is responsible for securing and preparing the item for shipment at the point of origin. The boot is intended for use in demanding operational environments and must comply with stringent durability and environmental protection requirements set by the Department of Defense. The solicitation is categorized as a subcontract under NAICS code 316999 and was posted on July 15, 2026, with a response deadline of July 27, 2026. The place of performance is located in Virginia Beach, Virginia, with a ZIP code of 23459-3018, indicating where the delivered item is expected to be utilized or inspected upon arrival. The contracting activity falls under the Electrical Devices Division of the Department of Defense, and the full details can be accessed through the DIBBS portal using the provided link, though no point of contact or set-aside designation is specified in the data.

General Info

Supply one defense-grade dust and moisture boot, NSN 5930016658689, FOB origin, deliver to Virginia Beach by July 27, 2026.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

316999 - All Other Leather Good and Allied Product ManufacturingView NAICS

Place of Performance

VIRGINIA BEACH, VA, 23459-3018, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ELECTRICAL DEVICES DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of one unit of a defense-grade dust and moisture boot compliant with DLA technical specifications, military packaging, marking, and FOB origin delivery.

Similar Contracts

Same NAICS industry code

Vehicular Seat Cushion Manufacturing and AssemblyThe contract involves the manufacturing and assembly of military combat vehicle seat cushions using textiles, foam, and synthetic materials, requiring precise cutting, molding, stitching, and final assembly to meet stringent defense standards. All work must comply with DLA technical specifications, packaging requirements outlined in DLA RP001, and labeling standards mandated by MIL-STD-129 to ensure compatibility and readiness in operational environments. The production is expected to be executed at a facility located in Tracy, California, with a zip code of 95304-5000, and falls under NAICS code 316999 for other textile product mills. This is a subcontract opportunity issued by the Department of Defense through LSO COMBAT VEHICLES AND ARMAMENT, with a response deadline of July 27, 2026, and a posting date of July 16, 2026. No set-aside type is specified, meaning the opportunity is open to all eligible contractors without reservation for small businesses or other categories. The contract is managed through the DIBBS system, and interested parties must submit responses via the official portal before the deadline to be considered for award. Failure to meet packaging, labeling, or technical specifications will result in rejection regardless of production capability.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Transport Bag Manufacturing and AssemblyThe contract involves the fabrication of 31 military-spec transport bags designed for Category I munitions, requiring strict adherence to Department of Defense demilitarization standards under DODM 4160.28-Vol.3. Each bag must be constructed using approved materials, precisely stitched, properly labeled, and subjected to rigorous inspection to ensure compliance with military specifications. The work is classified as a subcontract and falls under NAICS code 316999, indicating it involves other textile product mills. Performance of the contract is mandated to occur at Tracy, California with a zip code of 95304-5000, and all deliverables must be submitted by the response deadline of July 27, 2026. The solicitation was posted on July 16, 2026, under the Land Supply Chain office of the Department of Defense, emphasizing secure and regulated handling throughout production and delivery.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Medical Trauma Aid BagsThe contract calls for the manufacture of olive drab green compact trauma aid bags designed for military medical use, featuring MOLLE attachment systems for secure mounting on tactical gear, expansion zippers to allow flexible storage capacity, and internal clear and mesh pouches for organized and rapid access to medical supplies. The bags must meet stringent military specifications for durability, environmental resilience, and functional reliability under field conditions. The work is being procured as a subcontract under the Department of Defense’s Medical Supply Chain, with performance required at FPO 96674. The solicitation was posted on July 16, 2026, and responses are due by July 22, 2026, with the North American Industry Classification System code 316999 indicating non-medical appliance and supplies manufacturing. All items must be produced to exact military standards ensuring compatibility with existing field medical protocols and equipment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Custom Military-Grade Pouch Manufacturing

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Manufacturing of Military Vehicle Seat CushionsThe contract calls for the full manufacturing of two military vehicle seat cushions identified by NSN 2540016613959 and part number 185326HN304, encompassing all phases from material sourcing and fabrication to final quality assurance, strictly adhering to military specifications. The work must be completed to meet rigorous defense standards, ensuring durability, safety, and performance under operational conditions. The place of performance is designated as Barstow, California, with the ZIP code 92311-5015, indicating the expected delivery and logistical coordination will be centered there. This is a subcontract solicitation under NAICS code 316999, posted on July 14, 2026, with a deadline for responses set for July 27, 2026. The contracting entity is the Department of Defense, specifically under LSO COMBAT VEHICLES AND ARMAMENT, signaling the direct relevance to combat vehicle systems. Interested parties must respond through the official DIBBS portal using the provided RFQ link, and all submissions must align with the technical and compliance requirements tied to the military standard for seat cushion manufacturing, without any deviation permitted.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Sword Grip Manufacturing (Sharkskin or Synthetic)The contract requires the manufacture of sword grips using either bleached sharkskin or white pebble thermo-set plastic, with precisely 13 gold-wire bands installed, allowing a tolerance of plus or minus one band. The work must comply with strict material specifications to ensure uniformity and quality, and the production process must adhere to defined standards for durability and aesthetic consistency. This is a subcontract opportunity designated as a total small business set-aside under the SBA program, meaning only small businesses are eligible to compete, ensuring support for small business growth within the federal contracting ecosystem. The North American Industry Classification System code 316999 categorizes this effort under other miscellaneous textile product mills, indicating the nature of the manufacturing process involves specialized material transformation and finishing. The opportunity was posted on July 13, 2026, with a response deadline of August 7, 2026, and place of performance is specified as zip code 06320. The contracting entity is the Department of Homeland Security through its HQ Contract Operations office, though no point of contact or full address details are provided. Interested bidders must respond through the official SAM.gov portal linked in the contract data.

Hq Contract Operations (CG-912)(000

POSTED

DEADLINE

Leather Scabbard Covering and AssemblyThe contract seeks the covering of scabbard bodies with full-grain black calfskin or morocco leather, requiring precise adherence to thickness standards and resistance to crocking to ensure durability and performance under operational conditions. All materials must meet established quality benchmarks without compromise, and the work involves precise assembly techniques to integrate the leather covering securely onto the scabbard structure. The requirement is part of a Total Small Business Set-Aside under the SBA program, with the NAICS code 316999 indicating it falls under other textile product mills, and is intended exclusively for small business competitors. The response deadline is August 7, 2026, at 8:59 PM, and performance is to be completed at a location with the zip code 06320. The contracting entity is the Department of Homeland Security through its HQ Contract Operations office, and the opportunity was posted on July 13, 2026.

Hq Contract Operations (CG-912)(000

POSTED

DEADLINE

Heavy-Duty Military-Grade Tarpaulin SupplyThe contract calls for the supply of 21 military-grade tarpaulins identified by NSN 2540016060185, requiring full compliance with Department of Defense Logistics Agency specifications and ASTM D391 commercial packaging standards to ensure durability and operational readiness in field conditions. These tarpaulins are intended for heavy-duty use and must meet exacting performance criteria for environmental resilience, tear resistance, and structural integrity under demanding military applications. The solicitation, titled Heavy-Duty Military-Grade Tarpaulin Supply, is classified as a subcontract under NAICS code 316999 and was posted on July 12, 2026, with a firm response deadline of July 23, 2026. Place of performance is designated as Tracy, California, with a ZIP code of 95304-5000, and the contracting activity falls under the Department of Defense through the LAND SUPPLIER OPNS ENGINES organization. All submissions must be made through the official DIBBS portal using the provided RFQ link to ensure proper processing and eligibility.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Laptop Carrying Case Supply (Ruggedized)The contract is for the supply of ruggedized carrying cases specifically designed to protect the Getac S510 laptop during field operations in demanding military environments. These cases must meet stringent durability standards to withstand extreme conditions including shock, vibration, dust, moisture, and temperature variances typical of frontline deployments. The product is intended to ensure the operational readiness and longevity of critical equipment used by military personnel in austere settings. This subcontract is issued under the NAICS code 316999 for other miscellaneous fabricated metal product manufacturing and is managed by the Naval Air Warfare Center, a division of the Department of Defense. Although specific performance locations and point of contact details are not provided, the contract emphasizes field deployment support and is posted as of July 9, 2026. The solicitation does not indicate a set-aside status, suggesting it is open to general contractors capable of meeting the technical specifications for military-grade protective cases.

Naval Air Warfare Center

POSTED

DEADLINE

Webbing Strap Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Weighted Lap Pads SupplyThe City of Austin has issued a subcontract for the supply of 75 weighted lap pads specifically designed to deliver calming deep-pressure input to individuals with sensory processing needs. These lap pads are intended for therapeutic use and must meet functional and safety standards suitable for consistent daily application by users of varying sizes and ages. The solicitation falls under the NAICS code 316999, which categorizes it under miscellaneous apparel and accessory manufacturers, indicating the product is manufactured rather than sourced as a general commodity. The contract was posted on June 29, 2026, and is managed under the City of Austin’s finance and operations framework, with performance expected to occur within Texas. While no specific delivery location, point of contact, or set-aside designation is provided, the issuance through Austin’s official procurement portal confirms it as a formal municipal procurement requiring compliance with local contracting protocols. Bidders must ensure product quality, reliability, and adherence to therapeutic use requirements to fulfill the needs of the city’s programs supporting individuals with sensory regulation challenges.

POSTED

DEADLINE

Manufacturing of Scottish Broadsword Pattern ScabbardsThe contract requires the full manufacturing of 150 units of brown leather scabbards for the Canadian Army’s Sam Browne belt system, specifically designed to the Scottish Broadsword Pattern. Each scabbard must be crafted with specialized techniques and strictly conform to sealed patterns and technical specifications, ensuring historical accuracy and functional integrity for military use. The work demands high-level craftsmanship, precision in material selection, and consistent quality control to meet the exacting standards expected by the Department of National Defence. This subcontract opportunity was posted on June 26, 2026, with a response deadline of July 21, 2026, and is issued under the NAICS code 316999 for other miscellaneous textile product mills. Performance is to be carried out in Canada, with no specific city designated. The contract is managed by the Government of Canada through the Department of National Defence and is accessible via the Canada Buys portal, though no point of contact or set-aside designation is provided. Bidders must be prepared to deliver fully compliant products within the specified timeframe without deviation from the approved design standards.

Department of National Defence

POSTED

DEADLINE

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

Defense Contract Cybersecurity Compliance SupportThis contract provides support for achieving CMMC Level 2 self-assessment compliance and ensuring adherence to DFARS 252.204-7012 requirements to protect covered defense information associated with a cable assembly contract. The effort focuses on enabling the contractor to meet federal cybersecurity standards by implementing necessary controls, documenting security practices, and preparing for self-assessment procedures aligned with the Cybersecurity Maturity Model Certification framework. All activities must be conducted to safeguard sensitive information as defined by the Department of Defense’s data protection regulations. The subcontract is issued under NAICS code 541512 for computer systems design services and is tied to the Electrical Devices Division within the Department of Defense. The place of performance is designated as FPO 09578, indicating the work may be conducted remotely or in a military postal location. The solicitation closed on July 22, 2026, and was posted on July 17, 2026, suggesting a short response window typical for time-sensitive compliance support work. The contract does not specify a set-aside status and is available to qualified subcontractors capable of delivering cybersecurity compliance services in support of defense-related manufacturing.

Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

Defense Electronics Component Supply & DistributionA defense-grade cable assembly is being procured for immediate delivery to the USS MASON (DDG 87) with a strict timeline of 20 days from contract award, under FOB Destination terms that place responsibility for transportation and risk on the supplier until the item is received at the designated location. The delivery must occur at FPO, 09578, and the cable assembly will undergo inspection upon arrival to ensure compliance with military specifications and operational readiness standards. This subcontract, classified under NAICS code 423690 for other electronic component distribution, is issued by the Electrical Devices Division of the Department of Defense and requires a response no later than July 22, 2026, with the solicitation posted on July 17, 2026, indicating a compressed five-day window for submissions. The procurement is critical to sustaining the ship’s electronic systems and must meet exacting defense standards without deviation, with no set-aside provisions specified, leaving the opportunity open to qualified suppliers regardless of business size or status.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

High-Reliability Cable Assembly ManufacturingThe contract requires the manufacture of a high-reliability military-spec cable assembly designated as P/N 8604119-7 with NSN 5995016765478, to be produced under zero-defect sampling plans and stringent material control standards to ensure mission-critical performance. All processes must adhere to exacting quality protocols, with full traceability of components and strict compliance with defense-grade specifications to eliminate any potential for failure in operational environments. The work will be performed at a designated military post office location with ZIP code 09578, reflecting the classified and secure nature of the supply chain. This is a subcontract under the NAICS code 335931, issued by the Electrical Devices Division of the Department of Defense, with a solicitation posted on July 17, 2026, and responses due by July 22, 2026. The effort demands precision in material sourcing, fabrication, and testing, with no tolerance for defects or deviations. All contractors must demonstrate proven capability in producing military-grade electrical assemblies and be prepared to meet rigorous inspection and documentation requirements throughout production. The contract's focus is singular—delivering flawless cable assemblies that support defense systems under the most demanding conditions.

Current-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

SWITCH, PRESSUREThe contract calls for the procurement of five pressure switches with NSN 5930-01-476-6758 and part number 1103P1036, sourced from approved vendors Lockheed Martin Aeronautical Systems and ITT Aerospace Controls LLC. The items must be delivered within 94 days to the designated receiving warehouse in Tracy, California, under FOB origin terms, with no tolerance for quantity variance. Delivery must be completed by December 18, 2026, though the requested ship date is October 20, 2026. All packaging must comply with DLA’s master requirements, specifically RP001, and follow MIL-STD-129 for marking and labeling. If the product is classified as hazardous per Fed-Std-313, it must be packaged in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, though DLA’s technical requirements override ASTM in case of conflict. The unit of issue is each, priced at $5.00 per unit, totaling $25.00. Transportation guidelines are governed by DLAD Proc Notes C19 and C20, and all supplies must have government identification removed if not accepted. The contract falls under solicitation SPE7M8-26-T-5210, issued by the Department of Defense’s Electrical Devices Division, with technical and quality specifications incorporated from the DLA Master List of Technical and Quality Requirements.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 23 hours ago

DEADLINE

SWITCH, PUSHThis contract pertains to the procurement of a single push switch identified by NSN 5930-01-497-1031 and part number 800HA1C2E4J3L2N2(GG)16, with a requirement for delivery within twenty days to the USS VERMONT SSN 792 at FPO AP 96694-4300. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the switch or its components, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents explicitly authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment boundary compliant with NAVSEA 5100-003D. Packaging and preservation must adhere to MIL-DTL-28786 for switches, while marking and shipping must follow MIL-STD-129 and MIL-STD-2073-1E standards, with no special marking required. The switch is subject to zero variance in quantity, with inspection and acceptance occurring at the destination. All requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The buyer’s technical and quality history confirms validation of the part number and updated technical oversight documentation. Delivery is FOB destination, and transportation logistics are governed by DLAD procedures C19 and C20. The contract, issued under solicitation SPE7M8-26-T-5198, is for a federal procurement through the Department of Defense’s Electrical Devices Division, with a response deadline of July 22, 2026, and an original required delivery date of July 1, 2026.

Other Electronic Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

SWITCH, PUSHThis contract is for the procurement of a single push switch, identified by NSN 5930-01-497-1033 and part number 800HA1C1E4J3L2N2(GW)16, under solicitation SPE7M8-26-T-5199. The item must be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance. All packaging, preservation, and marking must conform to MIL-STD-2073-1E and MIL-DTL-28786 for switches, with marking per MIL-STD-129 and no special labeling required. The product is subject to strict restrictions on mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with the hardware unless specifically exempted, such as functional uses in batteries, fluorescent lamps, instrumentation, or weapon systems, in which case secondary containment and shock-proof design are mandatory per NAVSEA 5100-003D. Delivery is designated for the USS VERMONT SSN 792 at FPO AP 96694-4300, with transportation governed by DLAD PROC NOTES C19 and C20. The required delivery date is July 1, 2026, and the contract incorporates all technical and quality requirements referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements. The unit of issue is each (EA), priced at $1.00, with inspection and acceptance occurring at the destination. All supplies must comply with DoD procurement standards and hazardous material shipping protocols.

Other Electronic Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

SWITCH, PUSHThe contract specifies the procurement of a single push switch, identified by NSN 5930-01-281-1575 and part number 99-712-6B4-16100, under solicitation SPE7M8-26-T-5200, with a delivery requirement of 20 days FOB destination. The item must comply with stringent packaging and preservation standards outlined in MIL-DTL-28786 and MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containerization, all marked in accordance with MIL-STD-129 without special markings. Acceptance occurs at the destination with zero tolerance for non-conformances under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Mercury or mercury-containing compounds are strictly prohibited in direct contact with the hardware except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable fluorescent lamps and instruments requiring shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Delivery is directed to USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 under a vessel shipment protocol, with transportation governed by DLAD procedural notes, and the supplier must adhere to all DLA packaging, quality, and hazardous materials regulations. The contract includes a fixed quantity of one unit with no variance permitted, and the original required delivery date is set for July 1, 2026.

Other Electronic Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

CABLE ASSEMBLY, SPECThe contract pertains to the procurement of a single cable assembly with part number 8604119-7 and NSN 5995-01-676-5478, supplied by C.E. Precision Assemblies, LLC and Raytheon Company, under solicitation SPE7M8-26-T-5124. Delivery is required within 20 days to a FPO address aboard the USS MASON DDG 87, with delivery terms set as FOB destination and inspection and acceptance occurring at the destination. The item is not subject to shelf life constraints, and mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for specialized functions such as batteries, fluorescent lights, sensors, or naval-specified chemical reagents; when used, portable mercury-containing devices must be shockproof with secondary containment per NAVSEA requirements. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging standards. Sampling for quality assurance must adhere to MIL-STD-1916 or ASQ H1331 with zero nonconformances accepted unless specified otherwise, and attributes not otherwise classified are treated as major. The contract incorporates DLA’s master list of technical and quality requirements identified by R and I numbers and mandates a CMMC Level 2 Self-Assessment for cybersecurity compliance. Unit of issue is EA, with no tolerance for quantity variance. The item does not require Unique Item Identification, and government identification must be removed from non-accepted supplies. Shipment must use the fastest traceable means, excluding parcel post, and shipping instructions reference specific DLA procedural notes. The original required delivery date is March 13, 2026, with a solicitation response deadline of July 22, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Industrial Gasket per Military SpecificationThe contract calls for the supply of one specific industrial gasket identified by NSN 5330-01-548-5896, with a total quantity requirement of eight units. All items must comply with military packaging and labeling standards to ensure proper handling, storage, and deployment within defense logistics systems. The solicitation is structured as a subcontract under the NAICS code 332998, indicating it pertains to other fabricated metal product manufacturing. The offering entity is the Electrical Devices Division within the Department of Defense, and performance is required at the designated location in Chambersburg, Pennsylvania, with zip code 17201-4150. The opportunity was posted on July 16, 2026, with responses due by July 27, 2026, allowing potential vendors a defined window to submit proposals. All submissions must align with the technical and compliance requirements established by the military specification for this gasket type.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

DEADLINE

Small Business Subcontracting & Accelerated Payments SupportThe contract seeks administrative support services to ensure compliance with small business subcontracting representation and accelerated payment requirements under a Department of Defense initiative. The work is linked to NAICS code 541611, indicating management consulting services, and is performance-based with the place of performance located in New Cumberland, Pennsylvania, at ZIP code 17070-5002. The effort is focused on maintaining regulatory adherence for small business subcontracting obligations and facilitating timely payments as mandated by federal guidelines, which requires accurate tracking, documentation, and coordination with subcontractors and internal stakeholders. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, and is classified as a subcontract opportunity without a specified set-aside type or organization type designation. All work must be conducted in alignment with applicable federal acquisition regulations governing subcontracting reporting and payment acceleration mandates.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Hazardous Materials Compliance & Logistics SupportThe contract seeks specialized support for hazardous materials compliance, focusing on the preparation of Safety Data Sheets, proper OSHA labeling, and Department of Defense compliant shipment marking to ensure adherence to federal safety and transportation regulations. The work is tied to logistics operations centered in New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating that all compliance activities must align with DoD-specific standards for handling, documenting, and transporting hazardous substances. The task falls under the NAICS code 541690, classifying it as other scientific and technical consulting services, and is structured as a subcontract with no set-aside designation, making it open to any qualified vendor. The solicitation was posted on July 16, 2026, with a firm response deadline of July 27, 2026, leaving a narrow window for submission and evaluation. The contracting entity is the Electrical Devices Division within the Department of Defense, suggesting the services support defense-related equipment or systems that involve hazardous materials. The absence of a designated point of contact and specific office address implies that further coordination details may be available through the DIBBS platform at the provided link, where potential bidders should obtain full documentation and application instructions to meet the precise compliance and logistical demands of the DoD environment.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Push Switch Supply and DeliveryThe contract involves the supply and delivery of 14 commercial push switches identified by the National Stock Number 5930011788315, with all units required to meet stringent packaging, labeling, and hazardous materials compliance standards. The solicitation is issued under the NAICS code 334419, corresponding to other electrical equipment and component manufacturing, and is classified as a subcontract under the Department of Defense’s Electrical Devices Division. Performance of the contract is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity was posted on July 16, 2026, and responses must be submitted by July 27, 2026, with no set-aside provisions specified. All deliveries must comply with federal regulations governing the handling and documentation of potentially hazardous components, ensuring safe transport and proper identification throughout the supply chain.

Other Electronic Component Manufacturing

POSTED

DEADLINE