Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Defense Logistics Agency (DLA) Packaging & Marking Services

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military-compliant packaging, preservation, and marking services in strict adherence to ASTM D3951, MIL-STD-129, and DLA RP001 standards, ensuring all materials are prepared for secure and standardized shipment to Tinker AFB, Oklahoma. All packaging and labeling must meet rigorous defense logistics requirements to support the integrity, traceability, and readiness of military supplies during transit and storage. The work is being sourced as a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a submission deadline of August 17, 2026, and a primary focus on compliance with federal and military specifications rather than commercial practices. The NAICS code 561990 designates this as an Other Support Services contract, indicating the specialized nature of the logistics and packaging services required. Performance is exclusively tied to Tinker AFB, with a ZIP code of 73145-8000, and all contractors must be prepared to handle sensitive defense materials with precise documentation and handling protocols. The solicitation is posted on DIBBS, the Defense Logistics Agency’s procurement platform, and participation requires full understanding and capability to execute the exacting packaging, preservation, and marking procedures outlined by the referenced standards without deviation.

General Info

Military-compliant packaging, preservation, and marking for Tinker AFB per ASTM D3951, MIL-STD-129, DLA RP001 by August 17, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

561990 - All Other Support ServicesView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide military-compliant packaging, preservation, and marking per ASTM D3951, MIL-STD-129, and DLA RP001 for shipment to Tinker AFB.

Similar Contracts

Same NAICS industry code

Hazardous Materials Packaging and LabelingThe contract requires the packaging and labeling of Permethrin Cream Rinse in full compliance with Department of Defense and federal hazardous materials regulations for air transport, ensuring safe handling and transport within military logistics channels. All materials must meet stringent international and domestic standards for hazardous goods, including proper classification, containment, marking, and documentation to support military air distribution. The work is to be performed in alignment with U.S. military transport protocols and must be prepared for delivery to a P.O. Box address in FPO with ZIP code 09579, indicating operation within a deployed or overseas military support framework. This is a subcontract under the NAICS code 561990, with a submission deadline of August 17, 2026, and was posted on August 9, 2026, by the Medical Supply Chain Pharm FSA within the Department of Defense. The procurement does not specify a set-aside type, and no point of contact is listed, suggesting that all inquiries and submissions must be handled through the DIBBS platform using the provided solicitation link. Compliance with packaging and labeling standards is mandatory to ensure operational readiness and regulatory adherence across the defense supply chain.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 9 hours ago

DEADLINE

Packaging, Labeling, and Hazard Communication Compliance

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThe contract calls for comprehensive packaging, marking, and preservation of goods in strict compliance with MIL-STD-129 and ASTM D3951 standards to ensure the integrity of military shipments. This includes the application of barcoding, protective packaging materials, and precise labeling to meet Department of Defense requirements for durability, traceability, and environmental protection during transit and storage. All work must adhere to rigorous military specifications to safeguard equipment and supplies throughout the supply chain. This is a small business set-aside subcontract under NAICS code 561990, issued by the Land Supply Chain organization within the Department of Defense, with performance required at Fort Lee, Virginia, zip code 23801. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. Only small businesses qualify to bid, and the contract is structured to support the defense logistics network by ensuring standardized, reliable packaging solutions for military logistics operations.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract seeks specialized packaging, preservation, and labeling services for hazardous material shipments, strictly adhering to DFARS 252.223-7001, 29 CFR 1910.1200, and MIL-STD-2073-1E standards to ensure full regulatory compliance and safe handling throughout the transportation lifecycle. All work must be performed in accordance with rigorous defense and occupational safety requirements, with an emphasis on proper containment, hazard communication, durable labeling, and long-term preservation techniques tailored to sensitive military cargo. The scope demands precise execution by qualified vendors capable of meeting the unique demands of Department of Defense logistics while maintaining complete traceability and documentation integrity. This is a small business set-aside subcontract under NAICS code 561990, open exclusively to SBA-certified small businesses with a response deadline of August 20, 2026. Performance is required at the facility located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and is managed by the Land Supplier Operations Vehicle Support organization under the Department of Defense. The opportunity is posted on the DIBBS platform with the solicitation number SPE7L326T169U, and interested parties must submit proposals prior to the deadline to be considered for award, with no alternative set-aside options available beyond the total small business restriction.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

Packaging, Labeling, and Hazard Communication Compliance

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires specialized packaging, labeling, and documentation services for electrical connectors tailored to meet stringent military and federal hazardous materials regulations. This includes the preparation and submission of Safety Data Sheets and the mandatory disclosure of any radioactive materials contained within or associated with the products. All work must adhere strictly to established compliance standards to ensure safe handling, transport, and storage. The performance location is designated as New Cumberland, Pennsylvania, with the ZIP code 17070-5002, and the work falls under the NAICS code 561990 for other support services. The solicitation is issued as a subcontract by the Active Devices Division under the Department of Defense and was posted on August 9, 2026, with a response deadline of August 20, 2026. There is no specified set-aside type or organization type, and the point of contact information is not provided. Interested parties must submit proposals through the designated Dibbs platform prior to the deadline to be considered for award. The contract demands precision in regulatory adherence and accurate documentation to support military logistics and safety protocols.

ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

Radioactive Materials Special Handling (If Applicable)The contract requires strict adherence to labeling protocols for radioactive materials when the specific activity exceeds 0.002 microcuries per gram or the total activity reaches or exceeds 0.01 microcuries. Proper marking is mandatory to ensure compliance with safety and regulatory standards, and the contractor must implement procedures to identify, tag, and document all such materials in accordance with established guidelines. This requirement applies to all handling, storage, and transport activities associated with the subcontract and must be consistently followed throughout the performance period. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance listed as FPO with ZIP code 96691. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 561990 indicates it falls under Other Support Services, suggesting the work involves specialized logistical or operational support functions related to radioactive material handling. The contract does not specify a set-aside type, and no point of contact details are provided in the available data.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract requires the proper handling and labeling of hazardous materials in full compliance with OSHA’s 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001, ensuring all safety data sheets and hazard communication protocols are strictly followed. Performance is tied to the Defense Logistics Agency under the Department of Defense, with work to be executed at a military postal address in FPO with zip code 96691, indicating operations may occur in a deployed or overseas context. The solicitation, classified as a subcontract under NAICS code 561990 for other support services, was posted on August 9, 2026, with responses required by August 20, 2026. No set-aside preferences are specified, and the work demands rigorous adherence to federal safety standards for chemical communication and hazardous material management without exception.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Military Packaging, Packing, and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and marking services for air conditioning units destined for overseas shipment and long-term storage, adhering strictly to MIL-STD-129 and Defense Logistics Agency standards. All work must ensure the units are protected against environmental degradation, properly labeled, and documented to meet rigorous military logistics requirements for global deployment and inventory management. The services must align with the technical specifications and procedural controls mandated by the Department of Defense for defense-related shipments. This is a subcontract opportunity issued by the Defense Logistics Agency under NAICS code 561990, with a response deadline of August 20, 2026. Performance is required at the FPO address with ZIP code 96322-0001, indicating operations will support overseas military logistics networks. The posting date is August 9, 2026, and all bids must be submitted through the DIBBS portal using the solicitation reference SPE8E826T5113. Bidders must be prepared to meet exacting standards for packaging materials, corrosion prevention, barcode labeling, and documentation to ensure seamless integration into military supply chains.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Hazardous Material Labeling and Safety ComplianceThis contract requires the application of OSHA-compliant hazard warning labels in accordance with 29 CFR 1910.1200 and DFARS 252.223-7001 to ensure proper identification and communication of chemical hazards associated with materials used or handled at Robins AFB, Georgia. The work involves precise labeling practices that align with federal safety standards for hazardous materials, guaranteeing that all containers, piping, and storage areas are clearly marked with appropriate pictograms, signal words, hazard statements, and precautionary measures as mandated by the Globally Harmonized System. Compliance with both occupational safety and defense acquisition regulations is mandatory, requiring strict adherence to documentation, training, and labeling protocols to meet DoD requirements. The contract is classified as a subcontract under NAICS code 561990, which encompasses other support services, and is being issued by the Department of Defense through the Warner Robins office. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, indicating a focused procurement timeline for qualified vendors to demonstrate technical capability and regulatory compliance. Performance is specifically tied to the Robins AFB location with zip code 31098-1887, and all labeled materials must support safe handling, storage, and transport within the military installation’s operational environment. Vendors must possess the expertise to implement and verify labeling systems that meet both civilian safety and defense-specific regulatory frameworks.

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Handling and ComplianceThe contract requires comprehensive management of hazardous materials and preservation compounds in strict accordance with OSHA’s 29 CFR 1910.1200 and NAVSEA 5100-003D standards, focusing on accurate identification, classification, and safe handling procedures. A core responsibility includes the proper management of Safety Data Sheets, ensuring they are current, accessible, and compliant with regulatory expectations, as well as implementing secure packaging protocols to prevent exposure, contamination, or environmental release during storage and transport. All activities must align with federal safety and environmental compliance frameworks governing hazardous substance handling within military and defense operations. This subcontract is tied to operations at Robins Air Force Base, Georgia, with performance centered on supporting the Nuclear Reactor Program under the Department of Defense. The solicitation, posted on August 9, 2026, requires responses by August 20, 2026, and falls under NAICS code 561990 for other support services. While no set-aside classification or point of contact details are specified, the location and agency indicate the need for specialized expertise in defense-related hazardous materials compliance, with strict adherence to operational and safety protocols critical to mission continuity and personnel protection.

NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling Services

MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 9 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Electronic Invoice and Payment Processing (WAWF Support)

Computer Systems Design Services

POSTED

about 9 hours ago

DEADLINE

Domestic Content and Regulatory Compliance Support

Administrative Management and General Management Consulting Services

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Blind Rivet Manufacturing and Supply

Fabricated Structural Metal Manufacturing

POSTED

about 9 hours ago

DEADLINE

Packaging, Preservation & MarkingThe contract requires comprehensive packaging and preservation of bearings in strict compliance with MIL-STD-2073-1E and MIL-DTL-197M standards, ensuring all materials are protected against corrosion and environmental degradation using mercury-free preservation methods. All work must adhere to RP001 requirements, which govern the integrity and consistency of preservation practices across defense logistics. Proper identification and tracking are mandated through the implementation of IUID marking per DoD directives and MIL-STD-129 labeling for uniformity in logistics handling and inventory management. The work is to be performed at the specified location in New Cumberland, Pennsylvania, with a response deadline of August 17, 2026. This subcontract, issued under NAICS code 561910 by the ASC Commodities Division of the Department of Defense, is part of a broader effort to maintain readiness through standardized, reliable packaging and marking systems for critical military components.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract requires strict adherence to OSHA and Department of Defense regulations for the proper labeling and documentation of hazardous materials used in manufacturing or packaging operations. All hazardous substances must be accurately labeled according to established hazard communication standards, and Material Safety Data Sheets must be submitted promptly and maintained in compliance with federal requirements. The work is tied to a specific location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the performance and delivery of compliance services are expected to occur. The solicitation is classified as a subcontract under NAICS code 541690, which pertains to other scientific and technical consulting services, and the contracting entity is the ASC Commodities Division within the Department of Defense. Interested parties must submit their responses by the deadline of August 17, 2026, with the solicitation posted on August 9, 2026, and available through the DIBBS platform for further details and participation.

Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE