Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance and Labeling

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Hazardous Materials Compliance and Labeling requires the application of hazard warning labels and the preparation of Safety Data Sheet documentation for packaging materials, ensuring full adherence to OSHA regulations and DFARS requirements. This work is critical to the safe handling, storage, and transportation of hazardous materials under Department of Defense oversight, with strict compliance expected to meet federal safety and procurement standards. The task is assigned as a subcontract under NAICS code 561910, indicating it involves support services for waste management and remediation, specifically tailored to hazardous materials labeling and documentation processes. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and performance is to occur at Hill Air Force Base, Utah, with the specific zip code 84056-5734. The contracting entity is the ASC Commodities Division within the Department of Defense, and while no set-aside designation is specified, the work is expected to support critical logistical and safety functions for DoD operations. Contractors must be prepared to deliver accurate, compliant labeling and SDS documentation that aligns with both federal workplace safety mandates and defense acquisition regulations, ensuring no disruptions to supply chain integrity or safety protocols.

General Info

Hazardous materials labeling and SDS documentation required for DoD operations at Hill AFB under OSHA and DFARS compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply hazard warning labels and prepare SDS documentation for packaging in compliance with OSHA and DFARS requirements.

Similar Contracts

Same NAICS industry code

Packaging, Labeling, and Hazardous Material Compliance

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

Military-Compliant Packaging & Marking ServicesThe contract requires preservation packaging and marking of piston-valve assemblies in full compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring proper moisture protection and adherence to MIL-STD-129 for labeling requirements. The work must meet rigorous military specifications for long-term storage and transportation readiness, with all packaging processes designed to safeguard the assemblies from environmental degradation and ensure traceability through standardized markings. This subcontract is issued under NAICS code 561910 by DLA Dist San Joaquin under the Department of Defense and is performance-based at Tracy, California, with a zip code of 95304-5000. Proposals must be submitted by August 20, 2026, following the solicitation posted on August 9, 2026, and the work is intended to support defense logistics operations requiring certified military-grade packaging solutions.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

Packaging, Preservation & MarkingThe contract requires comprehensive packaging and preservation of bearings in strict compliance with MIL-STD-2073-1E and MIL-DTL-197M standards, ensuring all materials are protected against corrosion and environmental degradation using mercury-free preservation methods. All work must adhere to RP001 requirements, which govern the integrity and consistency of preservation practices across defense logistics. Proper identification and tracking are mandated through the implementation of IUID marking per DoD directives and MIL-STD-129 labeling for uniformity in logistics handling and inventory management. The work is to be performed at the specified location in New Cumberland, Pennsylvania, with a response deadline of August 17, 2026. This subcontract, issued under NAICS code 561910 by the ASC Commodities Division of the Department of Defense, is part of a broader effort to maintain readiness through standardized, reliable packaging and marking systems for critical military components.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Packaging and Palletization ServicesThe contract requires comprehensive packaging, preservation, and palletization services strictly aligned with RP001 and MIL-STD-2073-1E standards to ensure military-grade protection during secure transport. All work must meet rigorous defense specifications for environmental resilience, handling durability, and long-term storage integrity, with full accountability for compliance throughout the supply chain. The services are intended to support military logistics operations and must be executed in a manner that guarantees readiness and security during transit. This subcontract opportunity is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance based at New Cumberland, Pennsylvania, 17070-5002. The solicitation is open for responses until August 17, 2026, after which proposals will be evaluated for technical compliance and operational capability. The North American Industry Classification System code 561910 categorizes this as other support services, and while no set-aside status is specified, bidders must demonstrate proven experience in defense packaging protocols and facility capacity to handle sensitive military cargo. Proposals must be submitted via the designated DIBBS portal by the stated deadline.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Packaging, Preservation, and Marking (MIL-STD-129 Compliance)The contract requires full compliance with military packaging, preservation, labeling, and palletization standards, specifically MIL-STD-129, ASTM D3951, and RP001, ensuring all items are prepared for secure storage, transportation, and handling within DoD logistics systems. All work must adhere strictly to these specifications to guarantee uniformity, durability, and traceability of military-supplied materiel. The effort is structured as a subcontract under NAICS code 561910, indicating it relates to support services for transportation and logistics operations, and performance is designated for the location of Texarkana with a zip code of 75507-5000. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support division. While no specific set-aside status or point of contact is provided, the requirement is tied to essential logistics infrastructure supporting military supply chains. Interested parties must ensure their capabilities meet the rigorous standards outlined and deliver end-to-end packaging and marking solutions aligned with federal and military logistics protocols, with no deviations permitted without explicit authorization.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, labeling, and documentation for hazardous materials in strict adherence to MIL-STD-2073-1E and OSHA HAZCOM standards. This includes the preparation of Safety Data Sheets and the accurate application of hazard labeling to ensure regulatory compliance across all stages of handling and transportation. The work must be executed to meet federal defense specifications, with a focus on safety, traceability, and consistency in the treatment of hazardous substances. This subcontract, issued by the Department of Defense under the LAND SUPPLY CHAIN, is performance-based and centers on operations in San Diego, California, with a zip code of 92136-5299. Proposals must be submitted by August 20, 2026, following a posting date of August 9, 2026. The NAICS code 561910 indicates this contract falls under Other Support Activities for Transportation, reflecting the specialized logistics and compliance services involved. The solicitation is available through the DIBBS platform for interested vendors to review requirements and submit responses.

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThe contract requires specialized packaging, preservation, and labeling services for PIN-RIVET components in strict compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring all items are cleaned, dried, and protected to military-grade specifications for long-term storage and transport. Services must adhere to rigorous procedural and documentation controls to maintain readiness and traceability throughout the defense supply chain, with all work performed at the designated place of performance in Cherry Point, North Carolina, under the oversight of the ASC Commodities Division within the Department of Defense. The solicitation is classified as a subcontract and was posted on August 9, 2026, with a firm response deadline of August 17, 2026. The NAICS code 561910 indicates the work falls under Other Support Activities for Transportation, reflecting the logistical and technical nature of the packaging and preservation tasks. Although no set-aside information is provided, the contract is open to qualified subcontractors capable of meeting the exacting defense logistics requirements outlined in the referenced military and DLA standards. All submissions must be made through the DIBBS platform via the provided link to be considered.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Military-Compliant Packaging & Bar-CodingThe contract requires the packaging and bar-coding of fasteners in strict compliance with MIL-STD-129 and DLA RP001 standards, ensuring all items are properly unitized and marked with standardized identifiers for military logistics. This includes precise labeling, bar-code application, and packaging procedures that meet Department of Defense requirements for traceability, durability, and operational readiness. The work is to be performed at Camp Lejeune, North Carolina, with a zip code of 28542, and must be completed by the response deadline of August 17, 2026. It is classified as a subcontract under NAICS code 561910, which pertains to other support services, and is issued by the ASC Commodities Division under the Department of Defense. All deliverables must conform to federal military specifications without exception to ensure seamless integration into the DoD supply chain.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Specialized Packaging and Marking ServicesThe contract requires specialized packaging and marking services compliant with military standards, specifically adhering to MIL-STD-2073-1E and MIL-STD-129 for consistent, reliable handling and identification of defense-related materiel. All items must be packaged using clean and dry preservation methods, housed in E5 containers, and marked with exacting precision to ensure traceability, durability, and compatibility with military logistics systems. The work must meet stringent Department of Defense specifications to support secure, long-term storage and distribution under operational conditions. This is a subcontract opportunity posted by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a solicitation deadline of August 17, 2026. The NAICS code 561910 categorizes the service under Other Support Activities for Transportation, indicating the focus is on specialized logistical support rather than general contracting. There is no stated set-aside type, and performance location details are not provided, but compliance with all referenced standards is mandatory. Interested parties must submit responses before the deadline via the provided DIBBS portal link.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Packaging, Preservation, and Marking Compliance

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Packaging, Labeling, and Hazardous Materials Compliance

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Military-Compliant Marking and Labeling ServicesThe contract requires the application of continuous, legible, and durable identification markings in strict accordance with MIL-STD-129R standards, ensuring all items are properly labeled with the NSN, alloy composition, temper designation, and lot number. This work falls under a Total Small Business Set-Aside as defined by FAR 19.5 and is classified under NAICS code 561910, indicating it is an administrative and support services subcontract focused on specialized labeling and marking services. The performance location is designated as Tracy, California, with a zip code of 95304-5000, and the contracting entity is DLA Dist San Joaquin under the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and interested parties must submit through the DIBBS platform using the provided link, ensuring full compliance with military-grade marking specifications and timelines.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 10 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 10 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires compliance with MIL-STD-2073-1E and DLA RP001 for the packaging and marking of fasteners, encompassing all aspects of labeling, palletization, and hazardous materials documentation to ensure full adherence to military standards. All work must be performed at Robins AFB, Georgia, with strict attention to the specified technical requirements to meet Department of Defense supply chain protocols. The solicitation is restricted to HUBZone-certified small businesses under a HUBZone Set-Aside designation, and the NAICS code 493190 indicates the focus on warehousing and storage services. Offers must be submitted by the deadline of August 17, 2026, with the procurement managed by the ASC Commodities Division under the Department of Defense.

Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

First Article Testing and Engineering Compliance ServicesThe contract requires the performance of First Article Testing on three units designated as Lot/Item 5306/1218846, with all testing activities strictly aligned to AS9102 standards and applicable engineering change controls. The deliverable is a formal test report that documents compliance with technical specifications and ensures that the first production units meet all required quality and performance criteria. This engagement is classified as a subcontract under a HUBZone Set-Aside, intended to support small businesses located in historically underutilized business zones. The work is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and falls under the NAICS code 541330 for engineering services. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense. All testing procedures must adhere to rigorous aerospace quality standards, and the contractor must demonstrate full compliance with technical documentation and change management protocols throughout the process.

Engineering Services

POSTED

about 10 hours ago

DEADLINE

Self-Retaining Bolt SupplyThe contract calls for the supply of 330 self-retaining bolts identified by NSN 5306001218846, with all packaging required to meet Defense Logistics Agency compliance standards and delivery coordinated to Robins Air Force Base at the specified zip code. Terms are FOB Origin, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This subcontract is designated as a HUBZone Set-Aside, reserved for businesses certified in Historically Underutilized Business Zones, under NAICS code 332722 which classifies the work as forging and stamping. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense under its official procurement portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Precision Fastener Supply (Close Tolerance Bolts)The contract requires the supply of 5,500 close tolerance bolts with the National Stock Number 5306001218846, all of which must comply with military specifications for quality, dimensions, and performance. The vendor is responsible for proper packaging and labeling in accordance with government standards to ensure traceability and handling integrity during transit. Delivery is mandated to Robins Air Force Base, specifically at the ZIP code 31098-1887, with all obligations tied to the contract’s performance requirements and timelines. The solicitation is structured as a subcontract under a HUBZone Set-Aside designation, meaning only qualified small businesses located in historically underutilized business zones are eligible to compete, promoting economic development in targeted areas. The North American Industry Classification System code 332722 identifies the category as machine shops and precision turning centers, indicating the specialized manufacturing capability needed to meet the tight tolerances required. The opportunity was posted on August 9, 2026, and responses are due by August 17, 2026, managed by the ASC Commodities Division under the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Electronic Invoice and Payment Processing (WAWF Support)The contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow (WAWF) system in full alignment with Department of Defense payment protocols. All documentation must be processed electronically via WAWF to ensure timely and accurate payment, adhering strictly to DoD standards for invoice verification and receipt acknowledgment. The work is to be performed in support of the ASC Commodities Division, with the primary place of performance located at Hill AFB, Utah, 84056-5734, and is classified as a subcontract under NAICS code 541512 for custom computer programming services. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. Participation requires full technical capability to interface with WAWF and maintain compliance with all federal government electronic transaction requirements.

Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

Domestic Content and Regulatory Compliance SupportThe contract requires comprehensive documentation and verification services to ensure full compliance with the Buy American Act, the Berry Amendment, and U.S.-flag vessel shipping regulations, all critical for maintaining domestic sourcing and transportation standards in defense-related procurement. Services must confirm that all materials, components, and finished goods meet the stringent domestic content thresholds and manufacturing requirements mandated by these statutes, with rigorous audit trails and supporting evidence provided to demonstrate adherence. Performance is centered at Hill Air Force Base, Utah, with a focus on delivering verifiable records and certifications to the Department of Defense’s Commodity Division. The solicitation is structured as a subcontract with a NAICS code of 541611, indicating that the work involves management, scientific, and technical consulting services dedicated to regulatory compliance. Proposals must be submitted by August 17, 2026, and interested parties are directed to the DIBBS portal for formal submission details. The effort underscores the federal government’s emphasis on enforcing Made in America policies within its supply chain.

Administrative Management and General Management Consulting Services

POSTED

about 10 hours ago

DEADLINE