Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing and Engineering Compliance Services

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of First Article Testing on three units designated as Lot/Item 5306/1218846, with all testing activities strictly aligned to AS9102 standards and applicable engineering change controls. The deliverable is a formal test report that documents compliance with technical specifications and ensures that the first production units meet all required quality and performance criteria. This engagement is classified as a subcontract under a HUBZone Set-Aside, intended to support small businesses located in historically underutilized business zones. The work is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and falls under the NAICS code 541330 for engineering services. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense. All testing procedures must adhere to rigorous aerospace quality standards, and the contractor must demonstrate full compliance with technical documentation and change management protocols throughout the process.

General Info

First Article Test three units per AS9102 at Robins AFB under HUBZone subcontract for DoD.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

HZC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct First Article Testing (FAT) on three units of Lot/Item 5306/1218846 and prepare formal test report per AS9102 and engineering change controls.

Similar Contracts

Same NAICS industry code

Quality Inspection and Acceptance Testing

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract seeks subcontractor services to perform First Article Testing, which includes dimensional inspection, material verification, and functional testing to ensure full compliance with design specifications. This work is critical for validating that initial production units meet all technical requirements before full-scale manufacturing proceeds. The testing must be carried out with precision and documented thoroughly to confirm conformance across all mandated parameters. The solicitation is issued under the NAICS code 541330 for engineering services and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance of the work is required at Robins Air Force Base, Georgia, with a response deadline of August 17, 2026. The contract is classified as a subcontract, and while no set-aside type is specified, all bidders must meet the technical and procedural expectations outlined for first article validation in a defense supply context. Further details and submission instructions are accessible through the provided DIBBS link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Quality Assurance and First Article Testing (FAT) Services

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires independent inspection of PIN-RIVETs using military-standard sampling plans specified in MIL-STD-1916 or ASQ H1331, with acceptance quality level validation to ensure compliance with defined quality thresholds. Defect classification must adhere strictly to established military standards, ensuring consistent identification and categorization of non-conformances. The work is scoped under a subcontract for Quality Assurance and Inspection Services, with performance taking place at Cherry Point, North Carolina, 28533-5040. The North American Industry Classification System code 541330 indicates the nature of the services as engineering and technical consulting. This solicitation, issued by the ASC Commodities Division under the Department of Defense, is open for responses until August 17, 2026, with proposals submitted through the DIBBS system.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Quality Inspection and AQL VerificationThis contract entails the independent inspection and verification of kit attributes against specified Acceptable Quality Level standards, with critical defects governed by AQL 0.1 at Inspection Level VII, major defects by AQL 1.0 at Level IV, and minor defects by AQL 4.0 at Level II. The work requires rigorous adherence to statistical sampling protocols to ensure compliance with military-grade quality expectations, emphasizing precision in identifying and classifying defects across all components of the supplied kits. The solicitation is classified as a subcontract under NAICS code 541330, indicating it falls within the scope of scientific and technical consulting services, and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The opportunity was posted on August 9, 2026, with a response deadline of August 17, 2026, providing a limited window for qualified entities to submit proposals. Performance location details are not specified, and no set-aside status is indicated, suggesting the contract is open to all eligible subcontractors. The point of contact information is not included, and inquiries must be directed through the provided DIBBS portal link to access the full solicitation. Participation requires a thorough understanding of AQL methodologies and the ability to execute inspected audits under strict defense procurement protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) and Quality Compliance ServicesThe contract calls for the execution and documentation of First Article Testing to ensure full compliance with defense quality standards, encompassing dimensional inspections, material verification, and the preparation of First Article Inspection Reports. This work is critical to validating that production processes consistently yield parts and components meeting all technical specifications prior to full-scale manufacturing. All testing activities must align with applicable military and aerospace quality requirements, with meticulous recordkeeping and reporting to support audit readiness and supply chain integrity. The place of performance is designated as New Cumberland, PA, with a zip code of 17070-5002, indicating where the physical testing and documentation deliverables must be completed. The NAICS code 541330 classifies this as engineering services, underscoring the technical expertise required. Interested respondents must submit proposals by August 17, 2026, and the contract is structured as a subcontract under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with all activities expected to support defense production requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Inspection and Quality Assurance Services

FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

MIL-STD-129 Marking and Bar-Coding Services

ACTIVE DEVICES DIVISION

POSTED

about 11 hours ago

DEADLINE

Technical Data & Configuration Management SupportThe contract seeks a subcontractor to provide engineering and technical data management services focused on configuration control for the Department of Defense, specifically under the ASC SUPPLIER OPER OEM DIVISION. The scope of work includes handling engineering change proposals and variance requests, ensuring that all technical documentation and configuration data are accurately processed, maintained, and controlled throughout the product lifecycle. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 9, 2026, and responses must be submitted by August 17, 2026. The North American Industry Classification System code is 541330, which corresponds to engineering services, indicating that the deliverables are technical in nature and require specialized expertise in data management and configuration control. This is a subcontracting opportunity without a specific set-aside designation, open to qualified providers capable of supporting defense-related technical operations with strict adherence to configuration management protocols.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Quality Assurance and Inspection Services at OriginThis contract requires the performance of pre-shipment quality inspections at origin to ensure product conformance with Department of Defense specifications under MIL-STD-105 and ASQ Z1.4 standards. The vendor must execute rigorous inspection protocols to verify that all items meet the exact quality parameters defined by DLA, and provide complete, accurate documentation to support official government acceptance. The work is to be conducted at the origin point, meaning inspections occur prior to shipment and must be fully documented with traceable results for audit and compliance purposes. The contract is a small business set-aside under the SBA program, exclusively reserved for total small business concerns as defined by FAR 19.5, and is classified under NAICS code 541330 for scientific and technical consulting services. The place of performance is specifically designated as Fort Lee, Virginia, and while the solicitation is posted under the Land Supply Chain office of the Department of Defense, the exact point of contact details are not provided. Interested parties must submit responses by the deadline of August 20, 2026, through the designated DIBBS portal to be considered for award.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Quality Conformance Inspection and TestingThe contract requires independent quality inspection and sampling of brake shaft assemblies to verify strict adherence to Defense Logistics Agency and military specifications, with the explicit goal of achieving zero-defect conformance. The work involves rigorous testing protocols to ensure each component meets the highest standards for performance, durability, and reliability under operational conditions, making it critical for mission-critical defense applications. The scope emphasizes impartial third-party verification to maintain traceability and accountability throughout the inspection process. This subcontract is posted under NAICS code 541330 and is tied to performance at Hill Air Force Base, Utah, with a response deadline of August 20, 2026. The contract is managed by the Department of Defense under the Construction & Equipment Manu & Con organization, and all work must be completed in alignment with federal defense quality benchmarks. Participation requires demonstrated expertise in military-grade component inspection, established quality control systems, and the ability to deliver documentation meeting DLA compliance requirements without exception.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 11 hours ago

DEADLINE

Configuration and Change Management ServicesThe contract requires the implementation and thorough documentation of a formal configuration management system dedicated to controlling all design and process changes during the production of the glare shield. This system must ensure that every modification is properly identified, evaluated, approved, implemented, and tracked throughout the manufacturing lifecycle to maintain product integrity and compliance with technical specifications. The contractor is responsible for establishing clear procedures, maintaining accurate records, and ensuring all stakeholders adhere to the documented configuration control process to prevent unauthorized alterations and support quality assurance. This subcontract is issued under the NAICS code 541330 and is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and is open for bidding under the DIBBS platform. While the place of performance and specific point of contact are not detailed, the work is expected to directly support defense production activities, emphasizing stringent change control and documentation standards aligned with federal defense contracting requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 11 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 11 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires compliance with MIL-STD-2073-1E and DLA RP001 for the packaging and marking of fasteners, encompassing all aspects of labeling, palletization, and hazardous materials documentation to ensure full adherence to military standards. All work must be performed at Robins AFB, Georgia, with strict attention to the specified technical requirements to meet Department of Defense supply chain protocols. The solicitation is restricted to HUBZone-certified small businesses under a HUBZone Set-Aside designation, and the NAICS code 493190 indicates the focus on warehousing and storage services. Offers must be submitted by the deadline of August 17, 2026, with the procurement managed by the ASC Commodities Division under the Department of Defense.

Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

Self-Retaining Bolt SupplyThe contract calls for the supply of 330 self-retaining bolts identified by NSN 5306001218846, with all packaging required to meet Defense Logistics Agency compliance standards and delivery coordinated to Robins Air Force Base at the specified zip code. Terms are FOB Origin, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This subcontract is designated as a HUBZone Set-Aside, reserved for businesses certified in Historically Underutilized Business Zones, under NAICS code 332722 which classifies the work as forging and stamping. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense under its official procurement portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Fastener Supply (Close Tolerance Bolts)The contract requires the supply of 5,500 close tolerance bolts with the National Stock Number 5306001218846, all of which must comply with military specifications for quality, dimensions, and performance. The vendor is responsible for proper packaging and labeling in accordance with government standards to ensure traceability and handling integrity during transit. Delivery is mandated to Robins Air Force Base, specifically at the ZIP code 31098-1887, with all obligations tied to the contract’s performance requirements and timelines. The solicitation is structured as a subcontract under a HUBZone Set-Aside designation, meaning only qualified small businesses located in historically underutilized business zones are eligible to compete, promoting economic development in targeted areas. The North American Industry Classification System code 332722 identifies the category as machine shops and precision turning centers, indicating the specialized manufacturing capability needed to meet the tight tolerances required. The opportunity was posted on August 9, 2026, and responses are due by August 17, 2026, managed by the ASC Commodities Division under the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Electronic Invoice and Payment Processing (WAWF Support)The contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow (WAWF) system in full alignment with Department of Defense payment protocols. All documentation must be processed electronically via WAWF to ensure timely and accurate payment, adhering strictly to DoD standards for invoice verification and receipt acknowledgment. The work is to be performed in support of the ASC Commodities Division, with the primary place of performance located at Hill AFB, Utah, 84056-5734, and is classified as a subcontract under NAICS code 541512 for custom computer programming services. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. Participation requires full technical capability to interface with WAWF and maintain compliance with all federal government electronic transaction requirements.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Domestic Content and Regulatory Compliance SupportThe contract requires comprehensive documentation and verification services to ensure full compliance with the Buy American Act, the Berry Amendment, and U.S.-flag vessel shipping regulations, all critical for maintaining domestic sourcing and transportation standards in defense-related procurement. Services must confirm that all materials, components, and finished goods meet the stringent domestic content thresholds and manufacturing requirements mandated by these statutes, with rigorous audit trails and supporting evidence provided to demonstrate adherence. Performance is centered at Hill Air Force Base, Utah, with a focus on delivering verifiable records and certifications to the Department of Defense’s Commodity Division. The solicitation is structured as a subcontract with a NAICS code of 541611, indicating that the work involves management, scientific, and technical consulting services dedicated to regulatory compliance. Proposals must be submitted by August 17, 2026, and interested parties are directed to the DIBBS portal for formal submission details. The effort underscores the federal government’s emphasis on enforcing Made in America policies within its supply chain.

Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract titled Hazardous Materials Compliance and Labeling requires the application of hazard warning labels and the preparation of Safety Data Sheet documentation for packaging materials, ensuring full adherence to OSHA regulations and DFARS requirements. This work is critical to the safe handling, storage, and transportation of hazardous materials under Department of Defense oversight, with strict compliance expected to meet federal safety and procurement standards. The task is assigned as a subcontract under NAICS code 561910, indicating it involves support services for waste management and remediation, specifically tailored to hazardous materials labeling and documentation processes. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and performance is to occur at Hill Air Force Base, Utah, with the specific zip code 84056-5734. The contracting entity is the ASC Commodities Division within the Department of Defense, and while no set-aside designation is specified, the work is expected to support critical logistical and safety functions for DoD operations. Contractors must be prepared to deliver accurate, compliant labeling and SDS documentation that aligns with both federal workplace safety mandates and defense acquisition regulations, ensuring no disruptions to supply chain integrity or safety protocols.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE