Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DEICING, PNEUMATIC

Active
SPE4A5-26-T-343KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 10 pneumatic deicing units, identified by NSN 1680-01-622-5770 and Goodrich Corporation part number 25S4D5336-03. The items are classified as critical application commercial items and must be delivered to DLA Distribution Jacksonville within 171 days. The agreement specifies a strict quantity variance of plus or minus 0 percent, with inspection and acceptance occurring at the destination. The supplier must adhere to rigorous quality and technical standards, including Item Unique Identification per MIL-STD-130 and sampling methods aligned with MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA packaging requirements. Additionally, the contractor is required to meet Cybersecurity Maturity Model Certification Level 2 self-assessment standards and comply with covered defense information regulations.

General Info

Procure 10 pneumatic deicing units for DLA Jacksonville within 171 days.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-343K.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUSA
Contacts
Cynthia Duval
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DEICING,PNEUMATIC
NRP,DEICING PNEUMAT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A5-26-T-343K
SECTION B
CRITICAL APPLICATION ITEM
GOODRICH CORPORATION 0AJJ0 P/N 25S4D5336-03
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017838184 0001 EA 10.000
NSN/MATERIAL:1680016225770
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
US
SPE4A5-26-T-343K
SECTION B
PR: 7017838184 PRLI: 0001 CONT’D
Need Ship Date:02/07/2027 Original Required Delivery Date:01/24/2028
SPE4A5-26-T-343K NSN/Part Number: 1680-01-622-5770 Quantity: 10 EA Purchase Request: 7017838184QTY: 10 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
SCREW ASSEMBLY, PANE
Solicitation # SPE4A1-26-T-2559
This contract is for the procurement of three screw assemblies for panels, identified by NSN 5305016683006 and Hi-Shear Corporation part number HST12YW16-11. The item is designated as a critical application item. Delivery is required within 84 days, with a required delivery date of August 7, 2026, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement incorporates several DLA technical and quality requirements, including specific standards for packaging, configuration change management, and physical item marking. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero-based sampling plans required unless otherwise specified. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA procurement requirements.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
SHIM
Solicitation # SPEFA5-26-T-0986
Solicitation SPEFA5-26-T-0986 is a federal procurement issued by the DLA Fleet Readiness Center DLA PSC for the acquisition of 14 units of SHIM, identified by NSN 5310-LL-NC0-0479 and Sikorsky Aircraft Corporation part number 21A1876. The total estimated contract value is 196.00 dollars. Delivery is required within 28 days after the date of order, with an original required delivery date of October 3, 2026. The terms are FOB Destination, with the shipping destination located at the Fleet Readiness Center DLA in Cherry Point, North Carolina. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and MIL-STD-130N for the identification of U.S. military property. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, with a requirement of zero non-conformances for acceptance under MIL-STD-105/ASQ Z1.4. Administrative requirements include electronic invoicing via Wide Area Workflow (WAWF) and compliance with various FAR and DFARS clauses regarding small business representations, cybersecurity, and hazardous material labeling. Proposals were due by August 19, 2026, via the DIBBS portal.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
PIN, HIGH LIGHT
Solicitation # SPE4A6-26-T-15HS
This contract is for the procurement of seven units of high light pins, identified by NSN 5315-01-670-8125 and part number HST10YV-10-13 from Hi-Shear Corporation. The order is managed under solicitation SPE4A6-26-T-15HS with a required delivery date of May 10, 2027, and a delivery timeframe of 116 days. Shipping is set as FOB Origin, with the final destination being DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging and marking standards such as RP001, RQ011, and RQ017. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and inspection will follow MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this specific order. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE7M4-26-T-331V
This contract is for the procurement of six grooved clamp couplings, identified by NSN 5342-01-666-6319 and Eaton Aeroquip part number JR56225-093. The items are designated as critical application items and must be delivered to DLA Distribution Cherry Point in North Carolina. The delivery timeline is set for 84 days after order, with an original required delivery date of January 30, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, marking, and palletization standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through a zero-based sampling plan according to MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination, and the contract allows for no quantity variance.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-15HZ
This contract is for the procurement of two pin-rivets, identified by NSN 5320-01-667-5413 and Hi-Shear Corporation part number HST11YV6-3. The solicitation, numbered SPE4A6-26-T-15HZ, is issued by the Department of Defense ASC Commodities Division with a required delivery date of September 7, 2026, and a delivery window of 84 days after order. The items are to be delivered FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will take place at the destination, and the contract incorporates specific technical and quality requirements as defined in the DLA Master List.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
THERMAL ELECTRICAL,
Solicitation # SPE7M2-26-T-6205
This solicitation, issued by the Department of Defense Nuclear Reactor Program under solicitation number SPE7M2-26-T-6205, is for the procurement of five thermal electrical units with part number 1710-01-531-5451. The contract requires delivery within 242 days after order and specifies San Diego as the place of performance. The technical data associated with this requirement is subject to strict export controls under ITAR or EAR regulations and DFARS 252.225-7048. Consequently, distribution is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required Department of Defense training and questionnaires and received approval from the DLA controlling authority.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488190
New
DIBBS
WASHER, RECESSED
Solicitation # SPE4A6-26-T-15HX
This contract is a solicitation for the procurement of eight recessed washers, identified by NSN 5310-01-665-8476. The items must adhere to technical and quality requirements set forth in the DLA Master List, specifically following NASM21299 Revision 4. Delivery is required within 84 days, with the final destination being DLA Distribution Cherry Point in North Carolina. The agreement mandates strict quality control and sampling methods in accordance with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Inspection and acceptance are designated at the destination, and there is a zero percent variance allowed for the quantity of items delivered.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
ANGLE
Solicitation # SPEFA3-26-T-0348
This contract is a solicitation for the procurement of three units of an angle, identified by NSN 1560-LN-003-5612 and part number 70207-23001-105. The order is issued by the DLA Fleet Readiness Center Southeast with a required delivery date of February 7, 2027, and a delivery timeframe of 84 days. Shipping is set as FOB Destination to Jacksonville, Florida. The agreement mandates strict adherence to DLA Master List technical and quality requirements, specifically citing packaging standards ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331. Notably, the material has no shelf life requirement, and item unique identification is not required by the service customer.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
PRESSURE GAUGE
Solicitation # SPEFA1-26-T-0267
This contract is for the procurement of four pressure gauges under solicitation number SPEFA1-26-T-0267 for the DLA Fleet Readiness CT Southwest DLA. The items are identified by NSN 6685LN0035452 and part number 45-1082PS-02B-XPD-5000#, with a required delivery date of January 21, 2027. Delivery is set as FOB Destination to the Naval Base Coronado in San Diego, California, with a delivery window of 171 days. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots unless otherwise specified. There are no shelf life requirements for this material, and the quantity variance is strictly set at plus or minus 0 percent.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-15HH
This contract is for the procurement of two blind rivets, part number HST144YW16-16 from Hi-Shear Corporation, under solicitation number SPE4A6-26-T-15HH. The items are identified by NSN 5320-01-668-2826 and must be delivered to DLA Distribution Cherry Point in North Carolina. The required delivery date is February 10, 2027, with a delivery timeframe of 84 days after order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129, as well as palletization per RP001. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
CABLE, SPECIAL PURPO
Solicitation # SPE4A6-26-T-14WU
This contract is a solicitation for the procurement of two special purpose electrical cables, identified by NSN 6145-01-695-8080 and Sikorsky Aircraft Corporation part number 06552-00829-102. The items are designated as critical application items and must adhere to specific technical and quality requirements, including DLA packaging standards and source approval request documentation. While item unique identification is not required, the contractor must comply with physical identification and bare item marking standards. The order is issued by the ASC Commodities Division of the Department of Defense under solicitation number SPE4A6-26-T-14WU. Delivery is required within 84 days, with a required delivery date of August 7, 2026, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance will take place at the destination. The contract allows for no quantity variance and specifies that sampling may follow the Sikorsky Corporation alternate sampling plan provided it meets or exceeds ASQ H1331 or MIL-STD-1916 standards.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
FITTING FLAP
Solicitation # SPEFA1-26-T-0266
This contract is for the procurement of four Fitting Flap units, identified as Navy Critical Safety Items. Due to this designation, any requests for waivers or deviations must be approved by the DSC Contracting Officer. The items must adhere to strict quality and technical standards, including SAE AS9100 for manufacturers and specific DLA technical requirements. Marking and labeling must comply with MIL-STD-129, with each unit pack requiring the lot number, serial number, contractor cage code, manufacturer cage code, and part number. Inspection and acceptance will occur at the origin, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. Packaging must follow ASTM D3951 and RP001 DLA requirements. The delivery is set for 84 days after the order, with a final required delivery date of July 31, 2026. Shipping is designated as FOB Destination, with delivery directed to the DLA receiving officer at Naval Base Coronado in San Diego, California.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLI
Solicitation # SPE4A5-26-Q-0679
This contract is a solicitation for the procurement of 20 cylindrical roller bearings, identified as NSN 3110-01-731-9490 and Sikorsky Aircraft Corporation part number SB2197-101. The items are designated as Navy Critical Safety Items and Critical Application Items, requiring strict adherence to quality and technical standards. The agreement is based on a Firm Fixed Price with a delivery timeline of 154 days after order. Inspection and acceptance will occur at the point of origin. The contractor must comply with several DLA technical and quality requirements, including SAE AS9100 for manufacturers and specific packaging and marking standards under MIL-STD-129 and MIL-DTL-197M. Special sampling plans from Sikorsky Corporation are acceptable provided they meet ASQ H1331 or MIL-STD-1916 standards. All requests for waivers or deviations must be approved by the DSC Contracting Officer, and specific preservation methods must be applied based on the bearing type and size.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
DIBBS
PARTS KIT, VALVE, CUR
Solicitation # SPE4A5-26-T-339M
This contract, identified as SPE4A5-26-T-339M, is for the procurement of two valve cure parts kits from Parker-Hannifin Corporation, part number 4-156-510, under NSN 2915008702863. The items are designated as critical application items with a Type I shelf life of 120 months. Delivery is required within 171 days, with a need ship date of February 7, 2027, and an original required delivery date of August 1, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to several technical and quality requirements, including DLA packaging standards, configuration change management, and specific marking guidelines per MIL-STD-129. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, requiring each kit to be contained in a single cushioned box including a detailed contents list of component part numbers and quantities.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, RECESSED
Solicitation # SPE4A5-26-T-343J
This contract is for the procurement of 30 recessed washers, identified by NSN 5310014476251 and Bell Textron part number 140-007-41S34-2. The order is managed under solicitation SPE4A5-26-T-343J with a required delivery date of April 21, 2027, and a delivery window of 171 days. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Notably, item unique identification is not required for this order, and the material has no shelf life requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
GEAR, WORM
Solicitation # SPE4A5-26-T-342P
This contract is for the procurement of 35 units of worm gears, identified by NSN 3020011627566 and Sikorsky part number 70358-06616-101. The items are designated as critical application items and must adhere to specific quality and technical requirements, including the DLA Master List and CMMC Level 2 self-assessment. While Item Unique Identification is not required, the contractor must comply with covered defense information regulations and specific marking and identification standards. Delivery is set for 171 days after order, with a required delivery date of May 30, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging must follow ASTM D3951 and MIL-STD-129, with DLA packaging requirements taking precedence. Sampling for quality assurance may follow the Sikorsky Corporation alternate sampling plan QAP 1201, provided it meets or exceeds ASQ H1331 or MIL-STD-1916 standards.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
LOAD CABLE, R-HHSI, A
Solicitation # SPE4A5-26-T-340Q
This contract is a solicitation for the procurement of seven Load Cable, R-HHSI, A units, identified by NSN 6610-01-581-0268 and L3Harris Technologies part number 425560-006. The requirement is managed by the Department of Defense ASC Supplier OEM Division under solicitation number SPE4A5-26-T-340Q. Delivery is required within 171 days, with a need ship date of February 7, 2027, and an original required delivery date of May 14, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and Covered Defense Information protocols. Quality assurance will be conducted via zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements for procurement. This is designated as a critical application item with no allowed quantity variance.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE4A5-26-T-287N
This contract solicitation, designated SPE4A5-26-T-287N, seeks the delivery of 72 units of a plain seal identified by NSN 5330-01-492-3389, with a total estimated contract value of approximately $179,906.80 across multiple line items. The delivery is scheduled to be completed within 277 days after the order date, with a target need ship date of April 26, 2027, and the goods are to be delivered FOB origin to DLA Distribution Jacksonville at 175 Swan Road, Jacksonville, FL 32212-0103. The contract requires strict compliance with federal standards including MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for shipment and storage markings, and MIL-STD-130N for identification marking of U.S. military property, with no asbestos permitted as defined by Fed-Std-313. All packaging and labeling must adhere to DLA’s RP001 packaging requirements, with hazardous materials subject to 29 CFR 1910.1200 and proper identification under MIL-STD-129, and barcoding is implicitly mandated through these standards. Electronic invoicing is mandatory through Wide Area WorkFlow, with no alternative systems permitted, and acceptance of the goods occurs at the destination by Government personnel. The solicitation incorporates a comprehensive list of Federal Acquisition Regulation clauses governing cybersecurity, labor, sustainability, and administrative compliance, many of which are modified by Deviation 2026-00038 or other specific deviations. Key clauses include 252.204-7012 for safeguarding covered defense information and cyber incident reporting, 52.222-50 for combating trafficking in persons, 52.223-3 for hazardous material identification, and 52.232-39 and 52.232-40 for payment and subcontractor obligations. Offerors must maintain active SAM.gov registrations and provide accurate representations regarding small business status, socioeconomic certifications, and disclosure of covered defense telecommunications equipment. The contract does not specify a source selection methodology, nor does it include formal evaluation factors or weights, and while it references potential options for long-term performance, no option quantities are stated. Technical and
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A5-26-T-340H
This contract, identified as SPE4A5-26-T-340H, is a solicitation from the Department of Defense ASC Supplier OEM Division for the procurement of one data entry keyboard, part number 8524315-1 by Honeywell International Inc. The item is classified under NSN 5999015465257 and is designated as a critical application item. Delivery is required within 171 days, with a need ship date of February 7, 2027, and an original required delivery date of June 10, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E, though Item Unique Identification is not required. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance. Technical and quality requirements are governed by the DLA Master List, and any configuration changes must be managed through formal engineering change proposals or requests for variance.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
INDICATOR, PRESSURE
Solicitation # SPE4A5-26-T-339Z
This contract is for the procurement of one pressure indicator, identified by NSN 6685-01-491-3871, with a required delivery date of February 28, 2027. The item is designated as a critical application item and must adhere to specific technical and quality requirements, including the prohibition of intentionally added mercury or mercury-containing compounds, except where functionally required. The contract specifies that the item must be delivered FOB Origin to the DLA Distribution New Cumberland facility within 171 days. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, while palletization must adhere to DLA packaging requirements. Item Unique Identification is not required for this order. The contract references specific part numbers from Electric Boat Corporation and Cameron Energy Services Corp as approved sources.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE4A5-26-T-342X
This contract is a solicitation for the procurement of three units of a control cam, identified by NSN 3040-01-385-6861 and Lockheed Martin part number 357556-6. The item is designated as a critical application item with no shelf life requirement. Delivery is required within 171 days after order, with a need ship date of February 7, 2027, and an original required delivery date of January 23, 2028. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, physical identification, and the removal of government identification from non-accepted supplies. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Additionally, the contract requires compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and regulations regarding covered defense information.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PANEL STRUCTURAL
Solicitation # SPE4A5-26-T-343M
This solicitation, issued by the Department of Defense under the ASC Supplier OEM Division, is for the procurement of nine structural panels identified by NSN 1560-01-674-2671. The contract requires delivery within 171 days after receipt of order, with performance taking place in San Diego, California. The solicitation was posted on August 11, 2026, with a response deadline of August 19, 2026. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with these panels is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training, and be approved by the DLA controlling authority.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A5-26-T-343U
This contract is for the procurement of 20 machine thread plugs, identified by NSN 5365-00-889-9564 and Parker Hannifin Corporation part number 55548. The items are designated as critical application items and must adhere to strict technical and quality requirements, including specific standards for measuring and test equipment, configuration change management, and physical identification. Sampling must be conducted according to MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required for acceptance. Delivery is set for 171 days after order, with a required delivery date of March 21, 2027, shipped FOB Origin to DLA Distribution San Diego. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract specifies a zero percent quantity variance and designates the destination as the point for both inspection and acceptance.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-343C
This contract is for the procurement of one self-indicating bimetallic thermometer, identified by NSN 6685-01-417-6054 and Moeller Instrument Company part numbers 100417 and ITD32404-S. The item is designated as a critical application item and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is March 10, 2027, with a delivery window of 171 days after order. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, with specific requirements for delicate instrument marking. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details