Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DENTAL KIT, EMERGENCY

Active
SPE2DH-26-T-5362Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Emergency Dental Kit, model JBC-DENT-01, is a commercially packaged unit containing a variety of quality dental instruments and products designed for urgent medical needs. Each kit must be sealed in a protective container to prevent damage or breakage and packed in commercial shipping containers suitable for safe transport by common carriers at the lowest cost to the designated delivery point, including export requirements when applicable. All materials must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and proper labeling is mandatory. The unit of issue is each (EA), and the item is identified by NSN 6520-01-603-3451 with a quantity of one unit required under Purchase Request 7017552954, with delivery due within 20 days of award. The solicitation is governed by the DLA Master List of Technical and Quality Requirements, with applicable standards tied to the solicitation or award date depending on acquisition type, and covered defense information may apply. Packaging must adhere to DLA requirements, and non-accepted supplies must have government identification removed. Bidder must specify the source and part number supplied, and all terms are governed by Contract SPE2DH-26-T-5362 issued by the Department of Defense’s Medical Supply Chain FSH, with inquiries directed to Tina Vu at DLA.

General Info

Emergency Dental Kit JBC-DENT-01, NSN 6520-01-603-3451, one unit, delivered in 20 days, compliant with DLA and Medical Marking Standard No. 1

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

UNIT 100484 BOX 1, FPO, AP, 96677, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DENTAL KIT,EMERGENCY
DENTAL KIT,EMERGENCY
EMERGENCY DENTAL KIT MODEL NUMBER
JBC-DENT-01;STOCKED VARIETY OF
QUALITY INSTRUMENTS AND DENTAL PRODUCTS.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: EACH (EA) ..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
SPE2DH-26-T-5362
SECTION B
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6520-01-603-3451 Quantity: 1 EA Purchase Request: 7017552954QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
TEST SET SUBASSEMBLThis contract pertains to the procurement of two units of a test set subassembly identified by NSN 4921-01-029-3054 and part number CA70251, under solicitation SPE7M0-26-T-014D. The delivery must occur within five days of order placement, with FOB origin terms and no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 specifications, utilizing approved methods and materials while avoiding plastics where possible, as required by DLA packaging standards. The item is to be delivered to a military facility in Derince, İzmit, Turkey, with freight handled by PTK00A at NUWC Newport, and must be palletized and marked in accordance with all referenced defense standards. The contract prohibits the use of Class I ozone-depleting chemicals and mandates adherence to all technical and quality requirements listed in the DLA Master List, which controls based on the solicitation issue date. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the supplier must ensure compliance with the DLA procurement framework including oversight of government identification removal on non-accepted supplies. The solicitation is issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with a response deadline of August 3, 2026, and an original required delivery date of July 23, 2026. The item is classified under NAICS code 333310 and is subject to federal procurement rules. Special marking is not required, and the unit of issue is each. The point of contact is Audrey Acuna, and the full technical and quality specifications are incorporated by reference through DLA’s official master list. All deliveries are to be coordinated to the specified Turkish military address and governed by the DoD’s authorized unit of issue guidelines. The contract does not permit substitutions without prior approval, particularly for chemicals or packaging materials, and remains binding under all applicable defense acquisition regulations.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR CThis contract pertains to the procurement of one unit of a vehicular bracket designated by part number LS1104696 and NSN 2590-01-661-6799, issued under solicitation SPE7L1-26-T-858F by the Department of Defense through the Land Supply Chain. The item must be delivered within five days to Fort Benning, Georgia, FOB origin, with no variance allowed in quantity and inspection and acceptance taking place at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes applied. The bracket must be palletized in accordance with DLA standards and shipped via traceable freight methods, explicitly excluding parcel post. Ozone-depleting chemicals are strictly prohibited in manufacturing or incorporation, and any substitute materials require prior approval unless already authorized by specification. The delivery is linked to a specific government shipment identifier, with a required delivery date of July 22, 2026, and the supply chain point of contact is Kristina Derry. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
COVER, ACCESSThis contract pertains to the procurement of one unit of a specific item identified by NSN 2590-12-418-1466 and part number 864007201, with a delivery requirement of five days from the award date under FOB origin terms. The item must be packaged in compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129. Packaging and palletization must adhere strictly to DLA’s RP001 packaging standards, with no tolerance for quantity variance—exactly one unit must be delivered. Ozone-depleting chemicals are strictly prohibited in any material or process related to this contract, and any substitute chemicals require prior approval unless explicitly authorized by the governing specifications. The delivery destination is the Central Receiving Point at Fort Carson, Colorado, with shipments required to be sent by the fastest traceable method and explicitly excluding parcel post. All packaging must be marked with the specified freight and mark-for addresses, including the TCN W80BTZ61980097 and RDD 999 designation. The procurement is governed under solicitation SPE7L1-26-T-858T, with a required delivery date of July 22, 2026, and is classified under NAICS code 333310. The contract is subject to federal procurement rules, requires compliance with DoD unit of issue standards, and is managed by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
MANDREL, DENTAL HANDPIEThe contract pertains to the procurement of a straight screw head mandrel designed for use with screw-in type abrasive disks and abrasive wheels in dental handpieces, with each package containing twelve units. The item is identified by the NSN 6520-01-568-0437 and is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which must be adhered to as per the revision in effect on the solicitation or award date. Packaging must comply with DLA standards, and all supplies must be free of mercury or mercury-containing compounds except for specific, exempted applications such as batteries, fluorescent lamps, and certain instruments, with any mercury-containing portable devices requiring shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and bidders are required to clearly specify the source and part number being offered. The solicitation, issued under number SPE2DS-26-T-255X by the Department of Defense’s Medical Supply Chain, has a response deadline of July 27, 2026, with delivery expected within 20 days after award, and performance will occur at FPO, ZIP 09578.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333310
New
DIBBS
TOOL AND EQUIPMENT KIT
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
TWISTLOCK, RETRACTAB
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR CThe contract is for the procurement of two vehicular brackets, identified by NSN 2590-01-702-2659, under solicitation SPE7LX-26-U-8916, with a total delivery requirement to be met within 113 days after order. The solicitation is a total small business set-aside under FAR 19.5, with NAICS code 333310, managed by the Department of Defense’s Strategic Acquisition Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date or award date depending on the acquisition size. The item involves technical data subject to export controls under ITAR or EAR, and disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved JCP certification, completed DLA export control training, and formal DLA approval may access the controlled data. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The solicitation closed on August 5, 2026, and the point of contact is Theodore Misiolek of the DLA.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
METER, SPECIAL SCALE
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
Federal
4520--Heater Bundle Replacement in Boiler Plant One Time Repair
Network Contract Office 19 (36C259)

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
Federal
25--TWISTLOCK,RETRACTAB
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
Federal
TELESCOPE,PANORAMIC
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
Federal
25--BRACKET,VEHICULAR C
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 334519
New
DIBBS
HYDROMETER, GRADUATEThe contract specifies the procurement of one each of a graduated hydrometer with an integrated thermometer for measuring liquid temperature, featuring a specific gravity range of 39 to 51, manufactured from soda lime glass with 0.1 increments, and compliant with ASTM specification 6H. The device is lead and mercury free and meets NIST certification standards. Packaging must adhere to DLA requirements and the Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery via common carrier at the lowest cost to the designated delivery point. All items must be marked in accordance with medical marking standards and government identification must be removed from non-accepted supplies. The solicitation number is SPE2DH-26-T-5363, with a response deadline of July 28, 2026, and delivery required within 20 days after award. The product is identified by NSN 6630-01-687-6909 under a federal procurement managed by the Department of Defense's Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, and the solicitation may involve covered defense information.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
DISH, MEDICAMENT, DENTALThe contract pertains to the procurement of 10 units of a glass dappen dish specifically designed for dental and medical use, identified by NSN 6520-01-700-5630. The dish measures 1-1/4 inches in outside diameter with a depth of 1 x 1-1/8 inches and is constructed from smooth, transparent, heat-resistant glass to prevent adhesion of dense materials such as acrylics, amalgams, resins, and sealants. It features a thick solid base for stability and spill protection but is not autoclavable, requiring cold sterilization only. The unit of issue is each, and delivery is scheduled within 81 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions based on solicitation or award dates. The procurement is subject to DLA packaging standards, requirements for removal of government identification from non-accepted supplies, and potential handling of covered defense information. The solicitation number is SPE2DH-26-T-5357, posted on July 21, 2026, with responses due by July 28, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance directed to APO 96260-5479 and primary contact information provided for Craig Singleton. Bidders must clearly identify the source and part number being offered.
Dental Equipment and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTSGuttapercha points for endodontic root canal therapy are being procured in assorted sizes 15 through 40, designed for use with .06 taper files in single cone obturation techniques. Each package contains 60 points, and the item is designated by NSN 6520-01-532-1818 with a total quantity of two packages. The product must comply with strict shelf-life requirements, mandating a non-extendable 24-month expiration period from manufacture. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. Packaging must adhere to DLA procurement guidelines, and all supplies must be free of government identification if rejected. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DH-26-T-5355, has a response deadline of July 28, 2026, with delivery due within 84 days after award to APO zip code 96260-5479. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tara Quinty as the primary point of contact.
Dental Equipment and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,The contract is for the procurement of 10 units of a disposal container specifically designed for the safe disposal of hypodermic needles and syringes, with dimensions between 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a securable cap and a lift-off cover. The item is identified by NSN 6530-01-645-6923 and is part of a purchase request numbered 7017548716 with a total quantity requirement of 20 units to be delivered within 20 days of award. Technical and quality standards governing the product are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA packaging requirements, and government identification must be removed from non-accepted supplies. Covered defense information may apply, requiring appropriate handling and safeguarding. The solicitation number is SPE2DH-26-T-5351, issued on July 21, 2026, with responses due by July 28, 2026. The contracting office is under the Department of Defense's Medical Supply Chain FSH, with performance location at Fort Campbell, Tennessee, and primary point of contact Tina Vu, reachable via email and phone provided.
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BALL, PHYSICAL THERAPYThe contract pertains to the procurement of BALL PHYSICAL THERAPY items identified by NSN 6530-01-699-5154 and part number LE9565, with a quantity of six units to be delivered within five days FOB destination. The unit price is $6.00 per unit, totaling $36.00, with no variance allowed in quantity. All items must comply with the latest edition of the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe transport at the lowest cost. Marking and palletization must follow strict DLA guidelines, and the items are not regulated by the FDA. Delivery is required to Rose Barracks, Building 728, AWCF SSF, Sudlager Straße, Vilseck, Germany, with the original required delivery date set for July 23, 2026. The solicitation number is SPE2DH-26-T-5345, issued by the Department of Defense under the NAICS code 339113, with Tina Vu listed as the primary point of contact. All technical and quality requirements referenced are governed by the DLA Master List, and shipping must comply with DLA Procurement Notes C19 and C20.
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
COAT, MAN'S PAJAMAThis contract specifies the procurement of a man’s pajama coat in medium size, featuring a full-length coat style made from broadcloth fabric composed of cotton and polyester, with a snap fastener front and blue overall color. The unit of issue is each, and the item is identified by NSN 6532-00-081-1802 with a quantity of one unit ordered under purchase request 7017546135. Delivery is required within five days of award. The solicitation is part of a federal procurement under contract number SPE2DH-26-T-5360, posted on July 21, 2026, with responses due by July 28, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed prior to return. The procurement is administered by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334610
New
DIBBS
MEASURE, LIQUIDThe contract involves the procurement of three units of a liquid measuring device with the NSN 6640-01-650-1146, intended for use with the unmounted water purification unit identified as 4610-01-628-1081. Each unit is packaged in 250ml capacity and the entire requirement must be delivered within 20 days of award. Bidders are required to specify the source and part number being offered to ensure compliance with technical specifications. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a contract amendment supersedes it. The contract also mandates the removal of government identification from any non-accepted supplies. The solicitation number is SPE2DH-26-T-5347, with a response deadline of July 28, 2026, and the purchasing organization is the Medical Supply Chain FSH under the Department of Defense. The place of performance is Camp Pendleton, CA, 92055-5627, and primary point of contact is Tina Vu, reachable via email and phone as listed. The NAICS code for this procurement is 334610, indicating classification within instruments and related equipment manufacturing.
Manufacturing and Reproducing Magnetic and Optical Media

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
TEST PAPER AND COLOR C
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTS
Dental Equipment and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BALL, PHYSICAL THERAPY
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
WRAP AND LITTER, PAT
Alumina Refining and Primary Aluminum Production

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333415
New
DIBBS
BAND, EXERCISE, PHYSICAL
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details