This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Design and Manufacturing of Power Cable Assembly

Closed

Federal

Submission Closed07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335931

New

DIBBS

COVER, TERMINAL BOARD

Solicitation # SPE4A0-26-T-4595

This contract is for the procurement of one unit of a terminal board cover, identified by NSN 5940010883792 and part number MS18029-2S-8. The item is designated as a critical application item and must be manufactured according to basic specification MS18029E. Delivery is required within five days of order, with the shipping destination located at Camp Humphreys in Pyeongtaek, South Korea. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001 requirements. The contract specifies a zero percent quantity variance and designates both inspection and acceptance points at the destination. There is no shelf life requirement for this material.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-712V

This solicitation is for the procurement of four special purpose electrical cable assemblies, identified by NSN 5995-01-700-6369, under solicitation number SPE4A7-26-T-712V. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Div, with a delivery requirement of 163 days after receipt of order. The contract mandates strict compliance with several technical and security standards, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and marking requirements. Due to the nature of the technical data, the project is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-controlled technical data training.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-26-R-XD41

This solicitation is for the procurement of 40 special purpose electrical cable assemblies, identified by NSN 6150-01-569-5373. The contract is a total small business set-aside issued by the Department of Defense ASC Commodities Division with a delivery requirement of 80 days after order. Compliance is required with specific DLA technical and quality standards, including packaging requirements, physical item marking, and inspection and acceptance at origin. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, emphasizing zero-based sampling for acceptance. The contract mandates strict adherence to cybersecurity and export control regulations, specifically ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle technical data. Item Unique Identification is not required for this specific order.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

COVER, ELECTRICAL CONNE

Solicitation # SPE7M5-26-T-459M

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

INTERFACE UNIT, VIDEO

Solicitation # SPE8EN-26-T-3096

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-711X

This contract is for the procurement of one terminal box, identified by NSN 5940-01-676-4018 and Glenair part number 147-023XMS-03. The solicitation, numbered SPE4A7-26-T-711X, is issued by the Department of Defense through the ASC Supplier Oper AE and AF Div. Delivery is required within 20 days after order, with a required delivery date of July 14, 2026. The item is to be delivered FOB Destination to the USS Carl Vinson CVN 70. The agreement mandates strict adherence to technical and quality requirements, including DLA packaging requirements RP001 and marking standards per MIL-STD-129. Packaging must follow MIL-STD-2073-1E, and the shipment must be sent via the fastest traceable means, specifically prohibiting the use of parcel post. Inspection and acceptance will take place at the destination point.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

59--CABLE ASSEMBLY,POWE

Solicitation # N0038326QSB43

This sole source procurement, issued by the Navsup Weapon Systems Support under solicitation N0038326QSB43, is for 13 units of power cable assemblies identified by NSN 1R-5995-016914070-BL and reference number 4222AS0172-02. Delivery is specified as FOB Origin. The requirement is restricted to a sole source because the government lacks the necessary data to contract with alternative providers. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Those not already approved must submit all required documentation as detailed in the NAVSUP WSS Source Approval Brochure along with their proposal, or they will be ineligible for the award. The response deadline for this presolicitation is October 13, 2026, and inquiries should be directed to Cody P. Cameron.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6395

This contract is for the procurement of one pressure switch, identified by NSN 5930014819042, under solicitation number SPE7M8-26-T-6395. The item must be manufactured in accordance with specific Technical Data Package requirements, including various reference drawings and quality assurance provisions. Delivery is required within 10 days after receipt of the order, with a required delivery date of August 20, 2026. The shipment is destined for the US Army SSA W58MKR in Zaczernie, Poland. The agreement specifies that inspection and acceptance will occur at the origin. Packaging must comply with DLA requirements, utilizing ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all labeling adhering to MIL-STD-129. No first article testing or special deviations from the controlling documents are permitted. The contract is managed by the Department of Defense Electrical Devices Division.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-068D

This contract is for the procurement of three pressure switches, identified by NSN 5930-01-454-3718 and Barksdale Inc part number B1T-H32SS. The order is issued by the Department of Defense Maritime Supply Chain ESOC Buys under solicitation number SPE7M0-26-T-068D. Delivery is required within five days after receipt of order, with a final required delivery date of September 2, 2026. The items are to be delivered FOB Destination to the USNS Impeccable. The contract mandates strict adherence to DLA packaging, marking, and shipping requirements, specifically citing MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA. Shipping must be handled via the fastest traceable means, and the use of parcel post is explicitly forbidden.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-6164

The contract specifies the procurement of 4,846 packages of Terminal, Lug, with each package containing 100 units, identified by NSN 5940-01-054-6295 and part number MS21004-4, conforming to SAE AS21004F and SAE AS7928 standards. The item is classified as a commercial item and is subject to the Qualified Products List or Qualified Manufacturers List, requiring compliance with all technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and ISO/IEC 16388 for barcoding, with no special marking required. Packaging must conform to DLA Packaging Requirements, and preservation methods must meet specified codes including QUP:001, PRES MTHD:31, and PACK CODE:U. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware except for functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable instruments containing mercury requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin with a 158-day delivery period, and inspection and acceptance both occur at the destination facility in New Cumberland, Pennsylvania. Payment is governed by WAWF, requiring electronic submission of invoices and receiving reports via the Wide Area Workflow system. Contract clauses enforce compliance with cybersecurity standards including NIST SP 800-171, safeguarding covered defense information, prohibitions on hexavalent chromium and controlled equipment from Communist Chinese military companies, trafficking in persons, employment eligibility verification, and sustainable product requirements. The contractor must maintain representation of small business status, Socioeconomic certifications, and Unique Entity ID, and is subject to reporting obligations regarding covered telecommunications equipment and cyber incidents. All contractual obligations are binding under fixed-price terms, with changes governed by FAR 52.243-1, and deviations from requirements require prior written authorization. The solicitation closed on August 20, 2026, with performance beginning in January 2027 and a required delivery by April 13, 2027.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

WIRING HARNESS, BRANCHED

Solicitation # SPE4A6-26-R-XD36

Solicitation SPE4A6-26-R-XD36 is a total small business set-aside issued by the DLA Aviation ASC Commodities Division to establish a source of supply for branched wiring harnesses, identified by NSN 6150-01-572-0159. The award will be a bilateral Indefinite Delivery Purchase Order (IDPO) with a five-year base period, valid until the aggregate total of orders reaches a ceiling of 350,000 dollars. The current requirement specifies a quantity of 120 units with a required delivery of 90 days after receipt of order to various CONUS stock locations. Pricing is established as firm fixed price, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 self-assessment and safeguarding of covered defense information. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, while sampling plans follow MIL-STD-1916 or ASQ H1331. Evaluation for award is based on a combination of price, quoted delivery, and past performance, with SPRS assessments weighted most heavily. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CONTACT ASSEMBLY, ELECT

Solicitation # SPE7M0-26-T-067H

This contract is for the procurement of one electrical contact assembly, identified by NSN 5999009163680 and basic drawing 18876 10180355 Revision B. The order is issued by the Department of Defense under solicitation SPE7M0-26-T-067H with a required delivery date of August 31, 2026. Delivery is set for five days after order, with the FOB point at origin and inspection and acceptance occurring at the destination in Tobyhanna, Pennsylvania. The supplier must adhere to DLA packaging requirements and technical standards, including the prohibition of Class I ozone-depleting substances unless written approval is granted. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Packaging must comply with MIL-STD-129 and ASTM D3951, and shipments must be sent via the fastest traceable means, specifically excluding parcel post.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires the design, manufacture, and testing of a custom power cable assembly identified by National Stock Number 6150015713705, compliant with military specifications including MIL-STD-191 sampling standards and technical requirements set by the Defense Logistics Agency. The work must meet all performance, reliability, and quality benchmarks established for defense-grade electrical components, ensuring full interoperability and durability under operational conditions. The cable assembly is intended for use in military systems and must be produced to exacting standards with documented verification throughout fabrication and test phases. Submission responses are due by July 24, 2026, with the solicitation posted on July 16, 2026, under a subcontract classification. The project is administered by the ASC Commodities Division of the Department of Defense, with performance required at a facility in New Cumberland, Pennsylvania, zip code 17070-5002. The North American Industry Classification System code, 335931, confirms the scope falls under wiring device manufacturing, targeting qualified vendors with proven capability in defense-conforming electrical assemblies. All work must align with DLA’s technical guidance and be delivered in accordance with the contractual timeline and quality assurance protocols.

General Info

Design, manufacture, and test military-grade power cable per MIL-STD-191 for DLA, due July 24, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-07LA.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, POWE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 24

Deadline has passed

Submission Closed

07/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Design, manufacture, and test a custom power cable assembly (NSN: 6150015713705) to military specifications including MIL-STD-191 sampling and DLA technical requirements.