The New York State Department of Transportation (NYSDOT) is assisting STV Incorporated in the selection and retention of a Subcontractor to perform Finite Element Crash Simulation of NYSDOT’s mid-tension cable median barrier system with intermediate anchorage for the Consultant and State Design Team in NYSDOT, under Contract No. D041133-03 PIN SCGC.25.
The selected Subcontractor shall be solely responsible for providing all labor, operators, materials, software, and computing resources necessary to conduct the finite element simulations. This project will evaluate the performance of the NYSDOT mid-tension cable median guide rail system with intermediate anchorage under MASH TL-3 pickup truck and small car impacts, determining Critical Impact Points (CIPs), maximum deflections, and system response to roadway departure angles.
The required simulation effort will assist STV and NYSDOT personnel, or their authorized designee, with the performance and documentation of the simulation program. All work, equipment, and procedures shall meet as a minimum the requirements of the Manual for Assessing Safety Hardware (MASH) and shall comply with NYSDOT Standard Specifications, regulations, directives, guidelines, policies, procedures, manuals, and all applicable laws.
The scope of Finite Element Simulation Services includes, but is not limited to:
Development of Finite Element Model: Construct models representing the mid-tension cable median barrier with 600-foot runs and intermediate anchorage locations. Include cable stretching, departure-end terminals, and accurate representation of barrier components.
Simulation Tasks:
Identify CIPs for a MASH TL-3 pickup truck and small car under 25-degree roadway departure angles.
Conduct additional simulations for different departure angles to
Perform design revisions and additional simulations if needed.
Reporting and Project Deliverables:
Teleconference with STV and NYSDOT Project Team to review progress.
Technical memorandum summarizing simulation results, including CIPs, maximum deflections, and sensitivity analyses.
FEA report documenting methodology, assumptions, material specifications, and simulation results with recommendations for implementation or further research.
Required Experience: The Subcontractor (and their personnel) shall be thoroughly knowledgeable, trained, and experienced in Finite Element Crash Simulation of roadside safety systems and structural barriers. Personnel must have the necessary certifications, be able to communicate clearly, and have proven expertise in conducting dynamic crash simulation modeling and analysis using LS-DYNA. Demonstrated capability in supporting MASH-compliant crash testing through simulation, including calibration and validation of results against full-scale crash test data, is required. The Subcontractor shall also possess extensive high-performance computing resources to ensure timely execution of large-scale crash simulations and delivery of analysis results. All simulation work shall follow industry-accepted best practices for model development, verification, and validation, and shall use appropriate material models, boundary conditions, and vehicle dynamics consistent with MASH criteria.
Bid Information: Interested parties may receive a BID package from Mr. Alireza Mohammadi, STV Incorporated, Empire State Building, 350 Fifth Avenue, 10th Floor, New York, NY 10118, email:
•••••@•••••.•••Sign up to see this detail, Phone
+1 (•••) •••-••••Sign up to see this detail.
The BID package explains in more detail the nature of the work, requirements, and conditions needed to successfully complete this assignment.
Schedule: This project is anticipated to be performed during Winter 2026.
Prime Contract: STV has a prime contract with NYSDOT, Contract No. D041133-03. All applicable provisions of the prime contract apply to the subcontract. STV reserves the right to reject any and all bids, to waive any and all informalities, to invite new bid proposals, and to disregard all nonconforming, non-responsive, or conditional bids.
Bid Documents: Interested firms may obtain a copy of the Bid Package, including the Request for Proposals, Bid Sheets, and Contract Agreement, by contacting the Bid Document Contact listed above.
Deadline: Proposals prepared in conformance with the Bid Documents shall be accepted until 12:00 PM (Local Time), November 19, 2025, in the office of STV Incorporated, Empire State Building, 350 Fifth Avenue, 10th Floor, New York, NY 10118, or via email at
•••••@•••••.•••Sign up to see this detail.
The bidder shall include a detailed proposed schedule, outlining all major milestones and deliverable dates, as part of the bid submittal.
Bid Letting: Signed proposals must be received by 12:00 PM (Local Time), November 19, 2025. Proposals received after the deadline will not be accepted.
No bid information or interpretations will be provided orally; all must be by written addenda sent out at least three (3) days before bid submission.
The award of the contract will be made within three (3) calendar days after receipt of bids, subject to final approval by NYSDOT.
Procurement Compliance: Under the State Procurement Act, all communications regarding advertised projects are to be directed to the Contract Management Bureau’s Designated Contact: Mr. Alireza Mohammadi, STV Incorporated. Until a contract is approved, communication with any other NYSDOT or STV employees concerning this project is prohibited unless directed otherwise by the Office of Contract Management. Communications made contrary to this policy and deemed an attempt to influence the outcome may result in disqualification.
Subcontracting and Set-Asides:
Service-Disabled Veteran-Owned Set Aside: No
Minority-Owned Subcontracting Goal: 0%
Women-Owned Subcontracting Goal: 0%
Service-Disabled Veteran-Owned Business Goal: 0%
Disadvantaged-Owned Subcontracting Goal: 0%
Contract Information:
Due Date: TBD
Contract Term: 6 months
County: N/A
Location: N/A
Service-Disabled Veteran-Owned Set Aside: No
Minority Owned Sub-Contracting Goal: 0% Women Owned Sub-Contracting Goal: 0% Service-Disabled Veteran-Owned Business Contracting Goal: 0% Disadvantaged Owned Sub-Contracting Goal: 0%
Due date:11/19/2025
Contract term: 4 months
County(ies): All NYS counties
Location: NA This is a subcontract opportunity issued by STV Incorporated