Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DETECTOR, CARBON DIOXID

Active
SPE2DS-26-T-310QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.

General Info

Two CO2 detectors to Fort Wainwright, Alaska, delivered in five days with compliant packaging and DLA standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

3030 MONTGOMERY ROAD AWCF SSF, FORT WAINWRIGHT, AK, 99703-7000, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-310Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
BROOKE WEBB
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DETECTOR,CARBON DIOXIDE GAS
DETECTOR, CARBON DIOXIDE GAS
DETECTOR ETCO2 COVIDEAN; LOW U/I
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT OF ISSUE: EACH (EA) ,,
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-588-7389 Quantity: 2 EA Purchase Request: 7017738735QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER, ANALOG TO DI
Solicitation # SPE8EN-26-T-2779
This contract specifies the procurement of an analog-to-digital converter with NSN 7050-01-582-1116 and part number 70001777 from DIGI INTERNATIONAL INC., under solicitation SPE8EN-26-T-2779. The order is for ten units to be delivered FOB origin within 45 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA’s RP001 packaging requirements, with DLA’s Master List of Technical and Quality Requirements superseding any conflicting specifications. The item is exempt from Class I ozone-depleting substances and严禁 the intentional introduction of mercury or mercury-containing compounds, except for specific functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or Navy-specified reagents; any portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with the required ship date set for October 2, 2026, and the original delivery deadline set for January 23, 2027. The unit of issue is each, priced at $10.00 per unit for a total of $100.00. The contract incorporates all relevant DLA technical and quality requirements referenced by R or I numbers published online, and the version in effect at the solicitation or award date controls. Transportation details follow DLAD Proc Notes C19 and C20.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-311C
The contract specifies the procurement of a pediatric non-invasive blood pressure cuff with specific bladder dimensions: 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. The item is identified by NSN 6515-01-593-8773 and is a replacement for earlier part numbers 6515-01-582-4060 and 6515-01-582-4072. The unit of issue is each (EA), with a total quantity of four units required, delivered FOB destination within 20 days of the contract award. The product must meet strict packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must comply with ASTM D3951 and DLA’s Packaging Requirements for Procurement (RP001). All items must be sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate. Labeling, palletization, and handling must adhere to DLA requirements, and parcel post is explicitly prohibited; shipment must be traceable. The delivery point is a Department of Defense facility in San Antonio, Texas, with the government specifying that no government identification may be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, with precedence over any other specifications. The supplier, Philips North America LLC, is identified by part number 40401B, and the solicitation number is SPE2DS-26-T-311C with a required delivery date of August 6, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR, CARBON MONOX
Solicitation # SPE7M1-26-T-250G
This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
RETAINER, TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-310Y
The contract specifies the procurement of a single unit of a tracheal tube retainer compatible with the Save Ventilator identified by NSN 6515-01-571-1689, manufactured by Laerdal and listed under NSN 6515-01-588-5834. The item is designated for use in medical acquisitions and must be packaged in commercial containment that ensures protection against damage or breakage, with all units sealed in appropriate individual containers and grouped in exterior shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point in Fort Wainwright, Alaska. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision of that list is determined by the solicitation or award date. The solicitation, issued under SPE2DS-26-T-310Y, requires responses by August 11, 2026, with a five-day delivery deadline after award. The contracting office is the Department of Defense’s Medical Supply Chain MD Surg FSF, and primary point of contact is James Burke.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2808
This contract is for the procurement of a computer subassembly under solicitation SPE8EN-26-T-2808, with a total quantity of seven units to be delivered FOB origin within 17 days of award. The item is identified by NSN 7050015108447 and corresponds to specific part numbers from JERED LLC and ROCKWELL AUTOMATION, INC., each designated as a critical application item. Zero tolerance is permitted for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings required. Delivery is directed to DLA Dist San Joaquin in Tracy, CA, with a required ship date of September 4, 2026, and an original delivery deadline of December 13, 2026. The contract prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplies, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date controls compliance. No approved technical data package is currently available from DLA Troop Support for this NSN, and requests to their team are to be avoided. The unit of issue is each, priced at $7.00 per unit, with a total contract value of $49.00. All transportation logistics are governed by DLA procedural notes, and the solicitation was issued under NAICS code 334511 with a response deadline of August 17, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
HARNESS, ORONASAL MASK
Solicitation # SPE2DS-26-T-310N
The contract pertains to the procurement of an oronasal mask harness, identified by NSN 6515016079935, under solicitation SPE2DS-26-T-310N, with a total requirement of five units—one unit under CLIN 0001 and four units under CLIN 0002. Delivery is required within five days of contract award, with FOB destination terms, and no quantity variance is permitted. All units must be delivered to two specified military locations: Fort Wainwright, Alaska, and Fort Campbell, Kentucky. The item is classified as a medical device regulated by the FDA, requiring referral through EBS to confirm compliance prior to award. Packaging and marking must fully comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must ensure protection against damage through sealed unit containers and suitable commercial shipping containers. Packaging must adhere to ASTM D3951 and DLA’s RP001 packaging requirements, with palletization following specified standards and traceable shipping methods only—parcel post is prohibited. All packaging and labeling must reflect government-specific identifiers as outlined in the procurement documentation, and the supplier must provide a commercial-grade container capable of safe transit at the lowest cost. Final inspection and acceptance occur at the delivery point, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation date.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-311H
The contract specifies the procurement of a supraglottic airway device, size 4, designed for adult medium use, with each box containing six units. The item has a mandatory shelf life of 36 months from the manufacturer’s date, and no more than five months may have elapsed between the manufacturer’s date and the delivery date to the government. Labeling must comply with the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, contract number, and lot number. Technical and quality requirements referenced under RS001 and RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must conform to DLA standards under RP001, and any non-accepted supplies must have government identification removed as required by RQ011. Bidders are required to identify the source and part number being supplied. The item is identified by NSN 6515-01-618-8278 with a total order of two boxes. Delivery is due within 20 days after award, under solicitation SPE2DS-26-T-311H, issued by the Department of Defense’s Medical Supply Chain for Surgical and Financial Services.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8E9-26-T-3353
This contract pertains to the procurement of a computer subassembly under solicitation SPE8E9-26-T-3353, with a delivery requirement of 51 days and a firm fixed price of $16.00 per unit for a total of 16 units, resulting in a total contract value of $256.00. The item is identified by NSN 7050-01-511-4904 and must be delivered FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and marking codes. Palletization must adhere to DLA packaging standards, and all supplies must be free of intentional mercury or mercury-containing compounds, except for designated exceptions such as batteries, fluorescent lights, sensors, and instruments specified by NAVSEA, which must include secondary containment and shockproof design. The contract also mandates compliance with DLA’s Master List of Technical and Quality Requirements, incorporates Covered Defense Information protocols, and requires the contractor to perform a CMMC Level 2 Self-Assessment to ensure cybersecurity readiness. The solicitation is governed by federal acquisition regulations, issued by the Department of Defense under the NAICS code 334511, with performance located in Tracy, California, and primary point of contact designated as Matthew Kruc.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2778
The contract pertains to the procurement of two units of a computer subassembly identified by NSN 7050-01-548-4354, with a delivery requirement of 167 days after award. The solicitation number is SPE8EN-26-T-2778, issued on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334511 and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office, with performance localized to Tracy, California, 95304-5000. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment later supersedes it. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and covered defense information applies to this procurement. Point of contact is Jennifer Esworthy, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2829
This contract, issued under solicitation SPE8EN-26-T-2829, specifies the procurement of six units of a computer subassembly identified by NSN 7050-01-565-3832, with a delivery requirement of 167 days from the award date and FOB origin terms. The item must be packaged in compliance with ASTM D3951, with all packaging and labeling strictly following MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging requirements, which take precedence over any other standards. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. The contractor is required to comply with CMMC Level 2 self-assessment for cybersecurity and must handle Covered Defense Information according to RD002 policies. No technical data package is currently available from DLA Troop Support for this NSN, and requests for such data are not to be submitted. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 1, 2027, and an original required delivery date of May 4, 2027. The unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The contract is governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is controlled by the solicitation issue date.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8E9-26-T-3358
This contract pertains to the procurement of nine computer subassemblies identified by NSN 7050-01-523-3437, with a delivery deadline of 167 days after order. The solicitation number is SPE8E9-26-T-3358, issued on August 5, 2026, with responses due by August 17, 2026, under the NAICS code 334511 for computer and peripheral equipment manufacturing. The contract is administered by the Department of Defense through the Construction & Equipment MRO SVC I office, with performance required at New Cumberland, PA, 17070-5002. All supplies must comply with DLA packaging and technical requirements as enumerated in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Additionally, government identification must be removed from non-accepted supplies, and covered defense information applies to this procurement. The primary point of contact is Matthew Kruc, reachable via email and phone for inquiries.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 325413
New
DIBBS
CONTROL, RESPIRATORY PA
Solicitation # SPE2DS-26-T-311F
The BioFire RP2.1/RP2.1plus Control Panel is a synthetic nucleic acid-based quality control product consisting of 12 vials, each containing 300 microliters of a non-infectious buffer solution with stabilizers and preservatives. It is designed for in vitro use with the FilmArray instrument to monitor the detection and identification of respiratory pathogens during RP2.1 panel testing. Each kit provides sufficient reagent for six quality control runs, including six positive and six negative controls. The product requires strict frozenstorage between -25°C and -15°C (-13°F to 5°F) and has a non-extendable shelf life of 18 months, with no more than two months allowed to have passed from the date of manufacture to delivery to the government. Labeling must include the date of manufacture, expiration date, contract number, and lot number in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards, ensuring protection against damage, with exterior containers suitable for safe transport at the lowest cost to the specified delivery point. The item is governed by DLA technical and packaging requirements, including RS013 for shelf life, RP001 for packaging standards, and RD003 for potential covered defense information. The National Stock Number is 6550-01-690-4435, with a procurement quantity of three kits under solicitation SPE2DS-26-T-311F, with a delivery deadline of 83 days after award.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, PATIENT EXAMININ
Solicitation # SPE2DS-26-T-311L
The contract specifies the procurement of 10 packages, each containing 100 black, latex-free, powder-free nitrile exam gloves designed for special-forces operations. Each glove is large size, ambidextrous, non-sterile, and features a beaded cuff with a micro-roughened finish to enhance grip. The gloves have a palm thickness of 0.16 plus 0.03 millimeters, a palm weight exceeding 105 millimeters, and a length of 240 millimeters, classified as heavy-gauge for durability in demanding environments. The unit of issue is a package of 100 gloves, and the total quantity requested is 10 packages. Compliance with DLA packaging requirements and technical specifications referenced in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date. The government identification on non-accepted supplies must be removed per RQ011. The NSN is 6515-01-515-0197, associated with purchase request 7017754214, and delivery is required within five days of award. The solicitation, identified as SPE2DS-26-T-311L, was posted on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339113 for medical device manufacturing. Performance is required at Fort Bragg, North Carolina, with primary point of contact Aidan Martz at the Department of Defense’s Medical Supply Chain.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SUPPORT, ARCH
Solicitation # SPE2DS-26-T-311E
This contract solicits a pair of full-length corrective arch support devices designed for men’s sizes 10–11 and women’s sizes 11–12, to be worn inside shoes. The items are green in color and must meet technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. The product is identified by NSN 6515-01-387-2743 and is requested in a quantity of two units, with delivery required within 84 days of award to APO ZIP 09227-0000. Bidders must clearly state the source and part number being supplied and comply with DLA packaging requirements, as well as the provision for removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-311E, issued under NAICS code 339113 by the Department of Defense’s Medical Supply Chain organization, with a response deadline of August 11, 2026, and point of contact Elizabeth Cruz for inquiries. Covered defense information may apply, and all submissions must adhere to the specified acquisition protocols.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE, IRRIGATING
Solicitation # SPE2DS-26-T-311K
The item is a 60 cc irrigating syringe with dual graduations—marked in 5 cc increments up to 60 cc and in 1/4 oz increments up to 2 oz—featuring a catheter tip designed for surgical use in operating room procedures. It is autoclavable and supplied in hard pack, ensuring sterility and durability under repeated sterilization. Each unit must be individually sealed in a protected container to prevent damage or breakage, and shipped in commercial exterior containers suitable for safe transportation via common carriers at the lowest cost to the specified delivery point, which is Point Mugu, CA, 93042-0001. The packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and full compliance documentation is accessible through DLA Troop Support. The unit of issue is a package of 100 syringes, and the item carries a non-extendable 24-month shelf life as a Type I (Code M) item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date. The item is covered under Defense Information regulations and must be supplied with accurate source and part number information. The contract is issued under solicitation SPE2DS-26-T-311K with a bid deadline of August 11, 2026, and a delivery requirement of 20 days after order placement.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEOSTOMY
Solicitation # SPE2DS-26-T-311B
The contract specifies the procurement of two Shiley Adult Flexible Tracheotomy Tubes with TaperGuard Cuff, each featuring a single cannula design, an inside diameter of 7.5 mm, an outside diameter of 10.8 mm, and an inner cannula inside diameter of 6.5 mm, with a cuff resting diameter of 25.4 mm. These are disposable, sterile, and must meet stringent shelf life requirements, including a maximum of 72 months from manufacture to expiration and no more than 10 months elapsed from manufacture to delivery to the government. The tubes are identified by NSN 6515-01-735-1484 and must be sourced with the exact part number, as specified in the solicitation. Packaging and delivery must comply with DLA Packaging Requirements, and all technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The contract is issued under solicitation SPE2DS-26-T-311B, with bids due by August 11, 2026, and delivery required within five days of award to the designated performance location at JBER, Alaska, 99506-4400. The primary point of contact is Brooke Webb from the Department of Defense’s Medical Supply Chain, and all submissions must remove any government identification from non-accepted supplies as per RQ011 requirements.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
GLOVES, CHEMICAL PROTEC
Solicitation # SPE2DS-26-T-310R
The gloves are chemical protective, made of nitrile, and designed to be disposable, non-sterile, powder-free, latex-free, silicone-free, and antistatic with a chlorinated surface and smooth exterior. They feature a beaded cuff, are colored green, and measure 240 millimeters or 9.5 inches in length with a palm thickness of 0.12 millimeters or 4.7 mils and finger thickness of 0.16 millimeters or 6.2 mils. Each unit is packed in a box containing 100 gloves and must comply with DLA packaging and technical requirements as specified in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The government identification must be removed from any non-accepted supplies. The item is identified by NSN 6515-01-693-8297 with a purchase request number of 7017739038, quantity of one box, and a delivery requirement of 20 days after award. The solicitation number is SPE2DS-26-T-310R, issued on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office located in San Antonio, Texas, with Aidan Martz as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 621410
New
DIBBS
PLASMA CONTROL, NORMAL
Solicitation # SPE2DS-26-T-310P
PLASMA CONTROL, NORMAL LEVEL is a quality control solution designed for citrated plasma samples used in prothrombin time and activated partial thromboplastin time coagulation testing. It is intended exclusively for use with citrated PT and APTT cuvettes on the Coagulation Analyzer NS 6630 and comes in a kit of 15 vials packaged in 4 sleeves. The product must be stored refrigerated between 2 and 8 degrees Celsius and has a non-extendable shelf life of nine months. It is classified as a Type I (Code G) medical item regulated by the FDA and requires proper handling, labeling, and packaging in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is supplied by WERFEN USA LLC under part number 000DCJCPT-N and is identified by NSN 6550-01-519-7696. The contract specifies delivery within five days FOB destination with zero tolerance for quantity variance and inspection and acceptance occurring at the delivery point. Packaging must meet MIL-STD-2073-1E standards, ensuring protection during transit via commercial carriers at the lowest cost, with exterior containers suitable for export if required. All supplies must be marked in accordance with MMS No. 1, and government identification must be removed from non-accepted items. The solicitation number is SPE2DS-26-T-310P with a response deadline of August 11, 2026, and the procurement is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at JBER, AK. Bidder information including manufacturer details and part numbers must be provided during submission.
Family Planning Centers

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-311D
This tracheal tube is designed exclusively for veterinary use and is manufactured from clear medical-grade PVC with an inner diameter of 11 millimeters (33 French) and a total length of 520 millimeters. The device features a specially engineered high-volume, low-pressure cuff that is firmly secured, along with a pilot balloon equipped with a spring-loaded one-way valve for reliable inflation control. It includes a non-tapered standard 15mm connector, a beveled tip with a Murphy eye to reduce the risk of obstruction, and clear insertion depth indication marks with 1cm graduations for precise placement. The tube is radiopaque for enhanced visibility under imaging and is supplied in sterile packaging. Shelf life is strictly regulated at 36 months from date of manufacture, with no more than five months allowed to have elapsed between manufacturing and government delivery. The unit of issue is each, and the item is identified by NSN 6515-01-733-0824 with a procurement quantity of 10 units. The contract, issued under solicitation SPE2DS-26-T-311D by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, requires delivery within 20 days of award to San Antonio, Texas, 78226. The solicitation was posted on August 5, 2026, with responses due by August 11, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I codes, and packaging must comply with DLA standards. Government identification must be removed from any non-accepted items. The NAICS code 339112 confirms classification under Surgical and Medical Instrument Manufacturing. Primary point of contact is Patrick Esposito, reachable via email and phone listed in the contract data.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, NASOPHARYNGEAL
Solicitation # SPE2DS-26-T-310S
The contract specifies the procurement of 84 disposable, sterile nasopharyngeal airways made of plastic with a 7 mm diameter and 28 FR size, designed exclusively for emergency airway passage. Each unit must have a shelf life of 60 months, and no more than nine months may have elapsed between the manufacturer’s production date and the delivery date to the government. The item is identified by NSN 6515-01-444-5416 and is sold in units of each. Bidders are required to state the source and part number they are supplying. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The solicitation number is SPE2DS-26-T-310S, with responses due by August 11, 2026, and a delivery requirement of five days after award, to be performed at Fort Bragg, North Carolina, with the contracting agency being the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details