Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DETECTOR, GAS

Active
SPE7M1-26-T-268DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of two gas detectors identified by NSN 6665-01-608-4910 under solicitation SPE7M1-26-T-268D, with a required delivery within 20 days after award. The solicitation was issued on August 9, 2026, and responses must be submitted by August 20, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined based on the acquisition size and timing of amendments. For simplified acquisitions, the version in effect on the solicitation issue or award date applies, while large acquisitions follow the RFP issue date unless an amendment supersedes it. The alternate offeror must provide a complete data package including specifications for both the approved and alternate parts. The contracting agency is the Department of Defense through the Maritime Supply Chain office, with Michael Reese as the primary point of contact, reachable via email and phone. The NAICS code 334511 indicates classification within the instrumentation manufacturing sector, and the performance location is not specified beyond the United States.

General Info

Procure two gas detectors NSN 6665-01-608-4910, deliver within 20 days after award, DLA technical requirements apply.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-268D for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DETECTOR,GAS
DETECTOR,GAS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 6665-01-608-4910 Quantity: 2 EA Purchase Request: 7017785706QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
Supply of Radio Frequency Interference (RFI) FiltersThe contract specifies the procurement and delivery of 16 units of Radio Frequency Interference (RFI) filters designated by National Stock Number 5915011335911, intended for use under Department of Defense requirements. All items must comply with federal shipping, labeling, and documentation regulations, including full disclosure of any hazardous materials associated with the filters. The work is to be performed and delivered to a designated location in San Diego, California, with the zip code 92136-3581. The contract falls under the NAICS code 334511, indicating it pertains to the manufacturing of electronic components, and is classified as a subcontract. The solicitation was posted on August 9, 2026, with a mandatory response deadline of August 20, 2026. The contracting activity is managed by the Active Devices Division of the Department of Defense, and bidders must adhere to all associated federal procurement standards and timelines outlined in the solicitation.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Manufacture and Supply of Electronic Covers (NSN 5895-01-576-1316)The contract requires the manufacture, testing, packaging, labeling, and delivery of two electronic covers identified by NSN 5895-01-576-1316, ensuring full compliance with all applicable military and federal standards. The work must be performed in accordance with rigorous quality and technical specifications to meet operational requirements, with delivery targeted to the Tobyhanna location at zip code 18466-5050. The solicitation is classified as a subcontract under NAICS code 334511, indicating involvement in the manufacturing of electronic components. The opportunity was posted on August 9, 2026, with responses due by August 20, 2026, and is administered by the Electrical Devices Division under the Department of Defense. All activities must align with the contractual obligations outlined in the official solicitation accessible through the DIBBS platform.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
COVER, ELECTRONIC CO
Solicitation # SPE7M8-26-T-5910
The contract covers the procurement of two units of COVER, ELECTRONIC CO with NSN 5895-01-576-1316 and part number G611721-1, under solicitation SPE7M8-26-T-5910, with a required delivery within five days of order issuance and a required delivery date of August 6, 2026. The unit price is $2.00 per unit, totaling $4.00, with no variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization guided by DLA Packaging Requirements for Procurement, and DLA’s Master List of Technical and Quality Requirements takes precedence over any conflicting standards. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. The goods must be shipped by the fastest traceable means, explicitly prohibiting parcel post, to the receiving facility at Tobyhanna Army Depot, Pennsylvania, with a designated freight address and marking instructions provided. The supplier must adhere to configuration change management, variance request protocols, and removal of government identification from non-accepted items. The unit of issue is each, and the contract references the DoD authorized unit of issue system. Government-specific identifiers, including IPD, DIC, DIST, and FC codes, are included for internal tracking. Contact for inquiries is Dondiego Boler at the provided phone and email, with full details accessible via the DIBBS portal.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
NON-NSN ITEM
Solicitation # SPE4AC-26-T-0079
A single unit of Instrumentation I IST, identified by CAGE code 78286 and part number 70500-52062-074, is being procured under contract SPE4AC-26-T-0079 for delivery to the U.S. Department of Defense facility in Corpus Christi, Texas. The item must be delivered within five days of contract award with no tolerance for variance in quantity, and delivery is FOB destination, where inspection and acceptance also occur. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging requirements, and the unit of issue is one each. The shipment is designated as RDD 999/NMCS and must be sent by the fastest traceable method, explicitly excluding parcel post. The delivery address and mark-for location are both the U.S. Department of Defense facility at Corpus Christi, with the military freight identifier W45N7V621700RH and project code TP1. The original required delivery date is August 5, 2026, and the item is classified as a non-NSN item under NAICS code 334511, with the procurement managed by the CCAD Detachment under the Department of Defense.
CCAD DETACHMENT

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
PLUG, EAR
Solicitation # SPE2DS-26-T-324L
The product is a hypoallergenic medical-grade polymer ear plug, designated as NUDE, intended for medical use and subject to stringent procurement standards under the Federal Acquisition system. Each unit must be individually sealed in a protective container to prevent damage or breakage, and all units must be packed in commercial shipping containers suitable for safe transit by common carriers at the lowest applicable rate, with export packaging required when necessary. All items must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and markings must be applied per this standard, available through DLA Troop Support. The unit of issue is a box containing 25 pairs, with a total order quantity of 10 boxes, or 250 pairs. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies in accordance with RQ011, and packaging must adhere to DLA’s procurement packaging guidelines. The contract has a 20-day delivery window after award and carries the NSN 6515-01-606-4565 under solicitation SPE2DS-26-T-324L, issued by the Department of Defense’s Medical Supply Chain, with bids due by August 17, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
INTERCONNECTING BOX
Solicitation # SPE4A7-26-T-632R
The contract is for the procurement of an Interconnecting Box under solicitation SPE4A7-26-T-632R, with a quantity of four units at a unit price of $4.00, totaling $16.00. Delivery is required FOB origin within 166 days, with no variance allowed in quantity. The item is identified by NSN 5895-01-579-4045 and must comply with DLA packaging requirements per MIL-STD-2073-1E, including packaging code U, E5 unit containers, and marking in accordance with MIL-STD-129. Bare items must be marked with the contract number, NAWC CAGE code, and part number per technical drawings, with no special marking required. The supplier must meet DLA’s technical and quality requirements as referenced in the DLA Master List, and all inspections and acceptances occur at origin. Sampling follows MIL-STD-1916 or comparable zero-based plans with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively, and zero non-conformances are required unless otherwise stipulated. Mercury and mercury-containing compounds are prohibited except in specific functional components like batteries or instruments, which must meet NAVSEA 5100-003D containment standards. The item is designated a Critical Application Item and must comply with NAVAIR aircraft launch and recovery equipment traceability requirements. The supplier must hold a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and follow configuration change management and variance procedures. All documentation, including Source Approval Requests, must adhere to specified DLA standards. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping and transportation governed by DLAD procedural notes. The original required delivery date is March 24, 2027, with a need ship date of January 31, 2027.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
IMAGE INTENSIFIER T
Solicitation # SPE4A6-26-T-14QM
The contract pertains to the procurement of one Image Intensifier T with NSN 5855-01-706-0138 and part number BNG-020-A21, issued under solicitation SPE4A6-26-T-14QM by the Department of Defense’s ASC Commodities Division. Delivery is required within 376 days from the contract award, with FOB origin terms and no variance in quantity allowed. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including prescribed methods for preservation, wrapping, and containerization, with no special marking required. The item is subject to DLA packaging requirements and must be palletized accordingly. Compliance with technical and quality requirements referenced by R and I numbers from the DLA Master List is mandatory. The contractor must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and handle Covered Defense Information appropriately. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated. Measuring and test equipment used must meet RT001 standards, and removal of government identification from non-accepted supplies is required. The unit of issue is each, and shipment must align with DLA Procurement Notes C19 and C20. All technical specifications, quality controls, and delivery directives are binding and must be met prior to the required delivery date of August 29, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CANISTER ASSEMBLY, SUCT
Solicitation # SPE2DS-26-T-323G
The contract specifies the procurement of a disposable surgical suction canister assembly with a 300 mL capacity, featuring a sealed design, internal filter, and blue connection fittings, all constructed from plastic and including a 3-foot tubing. The item is identified by NSN 6515-01-620-9271 and is regulated by the FDA, requiring bidder information including manufacturer part number and source to be submitted for FDA referral confirmation. Packaging must comply with commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, ensuring protection against damage and safe transport via common carriers at the lowest cost to the designated delivery point at Cannon AFB, New Mexico. All packaging and marking must adhere strictly to DLA guidelines, and the contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE2DS-26-T-323G, with a response deadline of August 17, 2026, and delivery required within 20 days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4663
This contract specifies the procurement of a power supply under solicitation SPE7L7-26-T-4663, with a total quantity of 33 units to be delivered within 70 days to the DLA Distribution San Joaquin facility in Tracy, California. The item, identified by NSN 6130-01-552-9154 and part number 68-09762-003, is designated as a critical application item and must comply with stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129P, including specific requirements for containment, wrapping, and marking with no special marking codes. Delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The contract enforces zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with attributes assigned strict verification levels or AQLs, and prohibits intentional addition of mercury or mercury-containing compounds except in specified functional exceptions such as certain batteries, lights, or instruments, which must include secondary containment per NAVSEA guidance. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List. The acquisition is a total small business set-aside under NAICS code 334511, with the original required delivery date set for July 11, 2026, and a need ship date of May 5, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-322T
The contract specifies the procurement of sterile, single-use hypodermic needles with a 27-gauge size, 1.5-inch length, precision bevel design, and a grey hub, all latex-free and packaged in quantities of 100 per unit. The item is identified by NSN 6515-01-562-0759 and is subject to a non-extendable shelf life of 60 months as mandated by RS023 requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA procurement standards, and government identification must be removed from non-accepted supplies. The item is covered under potential defense information controls and requires bidders to clearly state the source and part number being offered. The solicitation is issued under contract number SPE2DS-26-T-322T with a response deadline of August 17, 2026, and a delivery requirement of 20 days after order placement. The performing location is Fort Bragg, North Carolina, with the Department of Defense’s Medical Supply Chain as the procuring agency and Michael Kohlbrenner designated as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
VALVE, RESUSCITATOR
Solicitation # SPE2DS-26-T-323L
The valve, resuscitator is a single-use barrier system designed for respiratory resuscitation, featuring three distinct filtration layers and a one-way duck bill valve to prevent contamination and ensure unidirectional airflow. It includes top and bottom ports and is adjustable between 5 to 20 cm H2O to accommodate varying patient needs. The device conforms to the ISO standard 22mm internal diameter connector, enabling universal compatibility with any resuscitation bag flow diverter that has a matching 22mm connection. Each unit is individually packaged to maintain sterility and readiness for immediate use. The unit of issue is a box of ten, with a minimum shelf life of 60 months from the manufacturer’s date, and no more than nine months may have elapsed between manufacture and delivery to the government to ensure optimal product integrity. The product is identified by NSN 6515-01-620-0444, with a procurement quantity of 11 boxes under purchase request 7017798103. Delivery is required within 70 days after order date. The solicitation, numbered SPE2DS-26-T-323L, was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF. The point of contact is Elizabeth Cruz, reachable via email and phone. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific references to RA001, RP001, and RQ011 covering technical standards, packaging, and removal of government identification from non-accepted supplies. The place of performance is specified as APO, ZIP 96260-5479, and the NAICS code 334511 classifies the product under medical equipment manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-268G
This contract solicits two gas detectors under NSN 6665-01-627-8701 from Teledyne FLIR Unmanned Ground Systems and Honeywell Analytics Inc. with part numbers 4465401K and GVC03-0912-001 respectively, requiring full compliance with DLA packaging standards MIL-STD-2073-1E and MIL-STD-129, including specific handling codes for dry storage, non-extendable 12-month shelf life, and hazardous materials labeling per OSHA’s Hazard Communication Standard and 29 C.F.R. 1910.1200. Suppliers must submit approved Safety Data Sheets and compliant hazard labels prior to award and ensure employee training on updated chemical communication requirements, with items subject to inspection and acceptance at destination and no variance allowed in quantity. The item is classified as a critical application with potential battery content and must meet CMMC Level 2 Cybersecurity Maturity Model Certification self-assessment requirements. Delivery is FOB origin within 20 days of contract award, with the final destination being Misawa Air Base in Japan and the required delivery date set for August 10, 2026, under solicitation SPE7M1-26-T-268G. Packaging must adhere to DLA procurement guidelines and RP001 standards, with no special marking required and palletization following DLA guidelines. Transportation logistics reference DLAD procedural notes C19 and C20, and all materials must be shipped using the authorized DoD unit of issue. The contract is managed by the Department of Defense’s Maritime Supply Chain under NAICS 334511, with Michael Reese as the primary point of contact, and bids are due by August 20, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 335921
New
DIBBS
CABLE, FIBER OPTIC
Solicitation # SPE7M1-26-T-269A
The contract specifies the procurement of 10 units of fiber optic cable identified by NSN 6015-01-555-8557 and part numbers 820-L14-006 and GBLCT-D2-02, classified as a commercial off-the-shelf item. Delivery is required within 20 days of contract award, with shipment originating FOB origin and no tolerance allowed for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly follow MIL-STD-2073-1E and MIL-STD-129, including method 10 for physical protection, cleaning and drying processes that do not damage the cable, and secure neutral wrapping of cable ends for at least four inches. Cables must be spooled or coiled on a minimum six-inch diameter form, with shorter lengths securely tied at three points and boxed in accordance with specified standards. All packaging must be marked per MIL-STD-129 and include the required special markings and codes. The shipment is destined for the Afloat Training Group in Norfolk, Virginia, and must be transported via the fastest traceable means, explicitly excluding parcel post. The contract references compliance with DLA’s master list of technical and quality requirements and mandates adherence to all applicable packaging, marking, and transportation protocols outlined in DLA procedural notes. The required delivery date is August 7, 2026, with the solicitation issued under SPE7M1-26-T-269A, and the point of contact is Michael Reese at the Department of Defense’s Maritime Supply Chain.
Fiber Optic Cable Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333914
New
DIBBS
COUPLING, SHAFT, RETAINE
Solicitation # SPE7M1-26-T-268N
The contract pertains to the procurement of a coupling, shaft, retainer item identified by NSN 4320-01-183-1924 and part number 393479, supplied by General Electric Company and Eaton Aerospace, LLC, and classified as a commercial item and critical application component for use on the GE 100 engine. The item is subject to DLA Packaging Requirements for Procurement and must comply with ASTM D3951 unless superseded by more stringent technical or quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to RP001 guidelines. The unit of issue is each (EA), with a fixed quantity of 15 units at a unit price of $15.00, totaling $225.00, and no variance is permitted in quantity. Delivery is mandated FOB origin with inspection and acceptance occurring at destination, and the item must be delivered within 165 days from the contract award, with a required ship date of February 2, 2027. The contract is issued under solicitation number SPE7M1-26-T-268N, posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 333914 and managed by the Department of Defense’s Maritime Supply Chain. Delivery is to be made to DLA Distribution Depot Oklahoma at Tinker AFB, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The item is part of a GE PBL program, and all government identification must be removed from non-accepted supplies. The point of contact for the contract is Michael Reese, with email and phone provided for inquiries. The unit of issue and purchase unit are standardized per DLA’s official reference, and all terms align with DoD procurement protocols for simplified or large acquisitions as applicable.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M1-26-T-269R
The contract is for the procurement of 41 electromagnetic relays with NSN 5945-00-690-2707 under solicitation SPE7M1-26-T-269R, issued as a total small business set-aside under NAICS code 335314 by the Department of Defense’s Maritime Supply Chain. The response deadline is August 20, 2026, and delivery is required within 327 days after contract award. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors approved by DLA,持有有效的美加联合认证计划证书, who have completed required training on handling DOD export-controlled technical data and passed the DLA questionnaire. Packaging must meet DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked per specified requirements. The contract incorporates technical and quality requirements from the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Joseph Madjecki at DLA.
Relay and Industrial Control Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 444180
New
DIBBS
NRP, LAMP, MARKER YEL
Solicitation # SPE7M1-26-T-268S
The contract pertains to the procurement of 28 yellow lamp markers with NSN 5960016136117 and part number 3847AS269-1, supplied by CAROLINA GROWLER INC under solicitation SPE7M1-26-T-268S. The item is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is due within 165 days, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-2073-1E with specific methods including dry preservation, D3 unit containers, E5 intermediate containers in quantities of 40, and a U pack code. Marking must follow MIL-STD-129 and include the special code 36 indicating fragile, with arrows pointing up and glass handling instructions. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and transportation logistics are governed by DLAD Proc Note C19 for shipping and C20 for first destination. The required ship date is February 2, 2027, with an original delivery deadline of April 20, 2027. The unit of issue is each, priced at $28.00 per unit, totaling $784.00. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 444180, and is managed by the Department of Defense’s Maritime Supply Chain agency with Ryan Snyder as the primary point of contact.
Other Building Material Dealers

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
CYLINDER SLEEVE
Solicitation # SPE7M1-26-T-268V
The contract pertains to the procurement of three Cylinder Sleeves with NSN 4310-01-004-3608 and part number H32554 from Curtiss-Wright Electro-Mechanical Corp, under solicitation SPE7M1-26-T-268V. Delivery is required FOB origin within 401 days, with inspection and acceptance occurring at the destination facility in Tracy, California. The unit of issue is each, at a fixed price of $3.00 per unit, with no variance permitted in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with controlling revisions determined by acquisition type and amendment dates. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specific methods for preservation, wrapping, and containerization, with palletization adhering to DLA packaging standards. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the item, except for approved functional uses in batteries, lights, sensors, weapons, or chemical reagents; portable devices containing mercury must include shockproof design and a secondary containment as specified by NAVSEA 5100-003D. Rework of non-conforming material is permitted under FAR 52.209-4. The contract mandates strict adherence to marking and shipping protocols, with delivery directed to the designated DLA warehouse address. The original required delivery date was January 12, 2027, but the current need ship date is September 26, 2027.
Air and Gas Compressor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-267Z
This contract specifies the procurement of 2,500 feet of electrical wire with NSN 6145-01-496-8616 under solicitation SPE7M1-26-T-267Z, issued by the Department of Defense through the Maritime Supply Chain. Delivery is required FOB origin within 62 days, with a quantity variance allowance of plus or minus 5 percent, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all packaging must be marked and labeled accordingly. The DLA Master List of Technical and Quality Requirements takes precedence over any general standards, and all technical and quality specifications referenced by R or I numbers are incorporated by direct linkage to the DLA eProcurement website. The unit of issue is feet, with 500 feet per unit pack, and the delivery address is DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with a required ship date of June 24, 2025, though the original required delivery date is set for December 31, 2026. The contract mandates removal of government identification from non-accepted supplies and identifies four qualified suppliers: NEXANS AEROSPACE USA LLC, THE BOEING COMPANY, WIREMASTERS INC., and ALLIED WIRE AND CABLE LLC, all using part number 5M2409-001. Transport and freight details are governed by DLAD Proc Notes C19 and C20, and point of contact is Alisha Blanton at DLA.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334514
New
DIBBS
SENSOR, CURRENT
Solicitation # SPE7M1-26-T-268C
The contract specifies the procurement of a commercial off-the-shelf current sensor identified by part number 6SL3053-0AA00-3AA1 and NSN 6625016911758, with a required quantity of three units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including MIL-STD-129 marking with no special codes. The item may contain batteries, and government identification must be removed from any non-accepted supplies. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped within 20 days of contract award, using the fastest traceable means, explicitly excluding parcel post, to the specified Virginia Beach delivery address under RDD 777. The purchase request is 7017784096, with a total price of $3.00 per unit, and the original required delivery date is August 5, 2026. The solicitation number is SPE7M1-26-T-268C, issued by the Department of Defense's Maritime Supply Chain, with Michael Reese as the primary point of contact.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334516
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-268E
This contract specifies the procurement of a gas detector, identified by NSN 6665-01-609-1302, with a quantity of two units to be delivered within 20 days under solicitation SPE7M1-26-T-268E. The item is designated as a critical application item with a non-extendable shelf life of 12 months, classified as Type II, and must comply with all applicable DLA packaging and technical requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Mercury and mercury-containing compounds are strictly prohibited except in functional applications such as batteries, fluorescent lamps, and specified instruments, with portable devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. The detector must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must adhere to DLA’s procurement standards, including palletization and special marking code 33 for shelf-life compliance. Hazardous material shipping requirements are governed by IP025 and DLAD procedural notes C19 and C20. The delivery address is Misawa Air Base, Japan, and the original required delivery date is August 10, 2026. The contract follows DoD unit of issue standards and incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.
Analytical Laboratory Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-270A
This contract specifies the procurement of one power supply unit with NSN 6120016923555 under solicitation SPE7M1-26-T-270A, requiring delivery within 20 days FOB origin, with no tolerance for quantity variance. The item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and must be palletized per DLA packaging guidelines. Mercury or mercury-containing compounds are strictly prohibited unless exclusively used in approved functional components such as batteries, fluorescent lights, certain instruments, weapon systems, or chemical reagents as specified by NAVSEA, and portable mercury-containing devices must have shock-proof containment and a secondary boundary as defined by NAVSEA 5100-003D. Delivery is to be shipped to the USS FT LAUDERDALE LPD 28 in Pascagoula, Mississippi, using the fastest traceable means—parcel post is explicitly prohibited. The supply must be delivered by January 27, 2026, and is subject to inspection and acceptance at the destination point. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the type and timing of the acquisition. The contract unit of issue is each (EA), with a total price listed as $1.000, and vendors must use the VSM system for the zip code 39568. Government-specific codes and identifiers are provided for logistics and tracking purposes, with primary point of contact being Michael Reese of the Department of Defense.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-268M
The contract is for the procurement of a filter element identified by part number 45012007 and NSN 4330015446534, with a total quantity of 11 units, each priced at $11.00, under solicitation SPE7M1-26-T-268M. Delivery is required within 165 days from the contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines and unit packaging defined by the contract. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation must follow DLAD Proc Note C19 for shipping and C20 for first destination transport. The original required delivery date is December 13, 2026, with a need ship date of February 2, 2027. The contract falls under NAICS code 333998 and is managed by the Department of Defense’s Maritime Supply Chain. All technical and quality specifications referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
ARMATURE, MOTOR
Solicitation # SPE7M1-26-T-268J
The contract pertains to the procurement of two armatures for motors, identified by part number 888146-0-54S and NSN 6105011573021, supplied by WARD LEONARD CT LLC with CAGE code 63743. The item is designated as a critical application component, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The supplies must be free of intentional mercury or mercury-containing compounds, except for specific functional uses in batteries, lamps, sensors, weapon systems, or Navy-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Packaging must comply strictly with MIL-STD-2073-1E, including preservative methods, desiccant, humidity indicators, and packaging levels designated as military grade. The containers must be properly blocked, braced, and immobilized to survive Distribution Cycle 18, Assurance Level II under ASTM D4169, and must meet all performance criteria for safe delivery; failure to do so necessitates redesign. Marking must follow MIL-STD-129 and ASTM D5445, including special markings such as “Do Not Bend,” “Arrow Up,” “Center of Balance,” and “Open This Side,” with serial numbers documented on all packaging levels and reflected in the packing list. All items must be delivered FOB origin within 165 days to DLA Distribution at Robins AFB, Georgia, with a required ship date of February 2, 2027, and original delivery date of May 9, 2028. The contract is structured as a Small Business Set-Aside under NAICS code 335312, with a total quantity of two units at a unit price of $2.00, and requires the contractor to provide ready-to-issue, serviceable materiel for direct DOD use.
Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M1-26-T-269K
This contract outlines the procurement of a fixed ceramic capacitor, part number CCR06CG472GS, manufactured in compliance with MIL-PRF-20/36H and MIL-PRF-20N Supplement 1, both effective as of specified revision dates. The item is classified as a commercial item under FAR 11.001 and is subject to strict quality control, requiring procurement exclusively from qualified sources listed on the Qualified Product Database (QPD) in accordance with MIL-PRF-20. Commercial substitutes are prohibited without prior written government approval. The capacitor must meet all technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, and the use of ozone-depleting substances is explicitly forbidden unless granted written authorization by the Contracting Officer. Mercury and mercury-containing compounds are prohibited in its construction or direct contact, with limited exceptions for specific functional uses such as batteries, fluorescent lighting, and naval instruments, all subject to additional containment requirements. The item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including special packaging and preservation methods as defined by MIL-DTL-39028 for capacitors. Each individual unit pack must bear lead-free or lead-containing attribute markings as per IPC/JEDEC J-STD-609, with placement and documentation requirements fully specified. The delivery is FOB origin, with a total quantity of 1,281 units to be delivered within 74 days, subject to zero quantity variance. Inspection and acceptance occur at the destination, and the shipping address is designated as DLA Distribution Jacksonville. The contract prohibits the use of hazardous materials without compliance to IP025 and requires adherence to all transportation directives under DLAD Proc Notes C19 and C20. The item is designated as a critical application component, and all packaging data has been reviewed and released in SAP as of May 13, 2026.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details