Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Development Permit Application No. P25-03345

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Development Permit Application No. P25-03345, also known as the Barstow Truck Project, is a proposal by Sangha Carrier to develop a multi-use facility located at 6050 West Barstow Avenue in Fresno, California. The project is designed to be executed in three phases. Phase 1 involves the construction of an 8,200-square-foot enclosed truck service facility and initial parking stalls. Phase 2 adds an 11,900-square-foot enclosed truck wash facility, a 4,000-square-foot security office, and a two-story office, while completing a 150-stall truck parking lot including 15 covered spaces. Phase 3 consists of a 453-unit mini-storage facility, a 4,000-square-foot office, and a 1,095-square-foot caretaker residence. The facility will operate with the truck repair shop and wash available Monday through Saturday from 8:00 a.m. to 10:00 p.m., while the parking facility will operate 24 hours a day, seven days a week using a lock-card system. The project is subject to a Mitigation Monitoring and Reporting Program to ensure compliance with the California Environmental Quality Act, including specific requirements for non-reflective building facades and shielded lighting to protect adjacent residential areas. Construction must adhere to DTSC, USEPA, and OSHA standards, and the project includes strict protocols for the discovery of human remains. The City of Fresno serves as the lead agency, with Thomas Veatch and Ken Vang of Vice Consulting Engineers acting as primary administrative and consulting contacts.

General Info

Sangha Carrier to build truck service, parking, and 453-unit storage complex in Fresno, California.

Agency

California → City of Fresno

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

Northeast corner of West Barstow and North Contessa Avenues, Fresno, CA, 93723

Set-Aside

NONE

Documents

(4)

Development Permit Application No. P25-03345 Summary Form

PDFsummary-form

Development Permit Application No. P25-03345 Barstow Truck Project ISMND Draft Final

PDFismnd

Development Permit Application No. P25-03345 Notice of Completion

PDFnotice-of-completion

Notice of Intent for P25-03345 Barstow Truck Project

PDFnotice-of-intent

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

Posted

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → City of Fresno
Contacts3 people available
OfficeN/A
Organization / Agency
California → City of Fresno
Office AddressN/A
Contacts

Interested Companies (1)

Show more
Vice Consulting Engineers
Fresno, CA

Full Description

Show more
Development Permit Application No. P25-03345 was filed by Sangha Carrier (Project Applicant). The Project Applicant proposes to construct a truck parking facility with a 20,440-square-foot enclosed truck wash and service building with office, a 150-stall truck parking lot, and a 453-unit mini-storage facility with an office and caretakers’ residence. The proposed project would result in the development of a truck parking facility with associated uses and infrastructure on the project site, as well as a 453-unit mini-storage facility and caretaker’s residence associated with the storage facility. The proposed project would be constructed in three phases, described below. Figure 3 shows the project site plan. • Phase 1 of the project would include an 8,200-square-foot enclosed truck service facility, including an office and designated truck service parking. Phase 1 would also include a portion of the incidental proposed truck parking stalls. • Phase 2 of the project would result in the development of an 11,900-square-foot enclosed truck wash facility, which would include an office and dedicated truck wash parking. Phase 2 would also complete the remaining incidental truck parking, bringing the total to 150 truck parking stalls, including 15 covered spaces. Phase 2 would also include a 4,000-square-foot security office and a two-story office that is on the southeast corner of the project site. • Phase 3 of the project would construct a 453-unit storage facility, a 4,000-square-foot office, and a 1,095-square-foot caretaker’s residence for the personal storage facility.

Similar Contracts

Same NAICS industry code

NAICS: 236220
New
Federal
FY27 SPECIAL PROJECT USNH YOKOSUKA ALTERATION, JAPAN
Solicitation # N4008427R1027
This is a sources sought notice issued by the Naval Facilities Engineering Systems Command Far East for a major renovation project at U.S. Naval Hospital Yokosuka in Japan, with a projected scope valued between $100 million and $250 million. The notice is not a solicitation for proposals but a market research effort to identify qualified contractors capable of performing a Design-Bid-Build construction project involving three interrelated packages: Package A, the base electrical infrastructure work requiring 578 calendar days; Package B, alterations to Buildings 1400 and 1407 at 1,627 calendar days; and Package C, renovation of the operating room in Building 1400 at 986 calendar days. Package A must be completed before work on Packages B and C can commence, and those two are optional, subject to future funding and exercise after award. The work encompasses extensive civil, structural, architectural, mechanical, electrical, plumbing, fire protection, cybersecurity, hazardous material abatement, antiterrorism, and sustainability measures across multiple hospital departments including the Emergency Department, Inpatient Pharmacy, Radiology, Sterile Processing, Surgery Suites, and Laboratory, requiring full compliance with UFC and NFPA standards, ABA accessibility standards, MHS World Class Checklist, and Japanese regulations. Contractors must be legally authorized to conduct business in Japan, possess a valid construction license issued by the Ministry of Land, Infrastructure and Transport or a prefectural authority, and be capable of executing complex renovations within an active military medical facility without disrupting critical operations. The U.S. Government will not extend United States Official Contractor status or civilian component certification under the U.S.-Japan Status of Forces Agreement, meaning contractors and their personnel must operate under local Japanese law without U.S. diplomatic protections. Responses must be submitted electronically via the designated Contractor Information Form, limited to 12 single-sided pages or six double-sided pages with 12-point font, including up to five detailed project examples that demonstrate relevant experience, capability, and capacity. All submissions must be received by 1530 JST on August 10, 2026, and no reimbursement will be provided for response costs. Proprietary information will be safeguarded and used solely for acquisition planning; no contract award will result from this notice, no evaluations or feedback will be issued, and no binding obligations are formed regardless of the substance of submissions. The contract type, when awarded, will be firm-fixed-price with performance occurring entirely on the
Navfacsyscom Far East

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 236220
New
SLED
DB Construction for HC-130J Flight Simulator Facility at USCG Elizabeth City, NC
Solicitation # 32000479
This design-build project involves the construction of a full motion Weapons System Trainer flight simulator facility for C-130J aircraft at USCG Base Elizabeth City, North Carolina. The approximately 13,000 gross square foot facility will include a simulator bay for Government Furnish, Government Installed equipment, classrooms, debriefing areas, administrative offices, and various support spaces such as electrical, mechanical, and telecommunications rooms. Site work includes the installation of sidewalks and landscaping while utilizing existing parking areas. The project is issued as a task order under the National Multiple Award Construction Contract III, Pool Two, with an estimated contract value of approximately 16 million dollars and a period of performance of 719 calendar days from award. The procurement utilizes a best-value tradeoff selection process, weighing price against non-price factors including planning, organization, communication, and the proposed construction approach. Technical requirements specify the use of Siemens Building Automation Systems for installation-wide compatibility and adherence to UFC 4-010-06 cybersecurity standards. All on-site personnel must be US citizens, and security clearance is managed via RAPIDGate. The project is subject to Davis-Bacon Act wage determinations for building and heavy construction in Pasquotank County. Quality control is mandated per FAR 52.246-12, with specific ASTM standards required for the testing of concrete, soil, and structural steel.
Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

in 2 days
View Details
NAICS: 236220
New
SLED
Upgrade Life Health Safety Systems in Hangar 250
Solicitation # N400857190530
Solicitation N400857190530, Project 7190530, involves upgrading the life health safety systems in Hangar 250 at MCAS Cherry Point, North Carolina. The scope of work includes architectural improvements, modifications to fire alarm and fire protection systems, and the rerouting of plumbing and electrical systems. Because the work occurs within an occupied facility, the contractor must coordinate closely with base operations and adhere to strict safety and security requirements. The project is estimated to be valued between 1,000,000 and 5,000,000 dollars, with a required completion period of 380 calendar days after the award. The basis for award is the lowest price, and the successful offeror will be issued a task order under MACC contract N4008525D. Key administrative requirements include the submission of proposals by September 24, 2026, at 3:00 PM local time. Bonding requirements are tiered based on proposal value, with bid, payment, and performance bonds required for proposals exceeding 150,000 dollars. The contract is subject to the Davis-Bacon Act and the Buy American Act, and it mandates specific paid sick leave for employees. Invoicing must be processed through Wide Area WorkFlow, and the contractor is required to maintain a comprehensive quality control system covering both onsite and offsite operations. Final acceptance is contingent upon a series of inspections, including punch out, pre-final, and final acceptance inspections.
Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS