Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from National Aeronautics And Space Administration was posted on May 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

DGEN Refresher Training

Closed
80NSSC26933109QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
RFP/RFQ - On-Call Engineering Services for Torrington Transfer Station/NRRA
Solicitation # EDC 11- 2026 -01
The Northwest Hills Council of Governments (NHCOG) is soliciting proposals under solicitation number EDC 11- 2026 -01 for on-call engineering services to support the Torrington Transfer Station and the Northwest Resource Recovery Authority (NRRA). The agency seeks a qualified firm specializing in Municipal Solid Waste and Recycling Transfer Stations to provide technical analysis, facility and operational capacity assessments, site planning, and permitting assistance. These services are intended to support ongoing operations and inform the NRRA Strategic Plan and future capital investment decisions, ensuring compliance with CT DEEP General Permits. Interested firms must submit their proposals by November 30, 2026, at 11:00 AM. Submissions must include a project management plan, key personnel resumes limited to two pages, three relevant references, a technical approach, and a detailed project timeline. A fee proposal containing hourly rates or lump sum allocations must be submitted in a separate sealed envelope. Evaluation will be based on personnel qualifications, experience with multiuse trails and waste facility planning, the proposed project approach, and the fee schedule. Awardees must provide proof of workers compensation, liability, and vehicle insurance, including a waiver of subrogation and naming the State of Connecticut and NHCOG as additional insureds within ten days of the award. Required documentation also includes a Non-Collusion Affidavit and certifications of non-discrimination.
DAS Procurement

POSTED

about 11 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

NASA/NSSC is procuring DGEN refresher training under a sole source contract authorized under FAR 12.102(a) to AKIRA TECHNOLOGIES INC., identified as the sole provider of this specialized training. The effort supports NASA’s in-house capability to maintain the AKIRA DGEN380 small turbofan test article located in the Glenn Research Center’s Aero-Acoustic Propulsion Laboratory. The core requirement is a two-week training session conducted by an AKIRA engineer at Glenn Research Center, focused on the disassembly and reassembly of the DGEN380 system, to be scheduled during FY2026 with a mutually agreed-upon timeframe. The contractor must provide the training schedule to the NASA point of contact no later than 30 days prior to the session. This acquisition is classified as an 8(a) Sole Source set-aside under NAICS code 541330, and the government intends to treat it as a commercial item acquisition governed by FAR Part 12. The solicitation, numbered 80NSSC26933109Q, was posted on May 21, 2026, with a deadline for submission of capabilities and qualifications at 3:00 p.m. Central Time on May 26, 2026; responses are limited to written submissions, and oral communications are prohibited. The NASA Shared Services Center serves as the procuring organization, with McKenzie Hanson as the primary point of contact. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and the evaluation of submissions is solely to justify the decision against full and open competition. No pricing, delivery terms, inspection criteria, or detailed performance metrics are specified in the public documentation, and the total contract value remains unstated.

General Info

NASA awards sole source DGEN refresher training contract to AKIRA TECHNOLOGIES, ending May 2026.

NAICS

541330 - Engineering Services

Place of Performance

MS, USA

Set-Aside

8A

Documents

1

DGEN380 Follow-on Training Statement of Work

PDF, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts1 person available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts
McKenzie Hanson

Full Description

Show more

Synopsis:



NASA/NSSC has a requirement for DGEN refresher training. 


NASA/NSSC intends to issue a sole source contract to AKIRA TECHNOLOGIES INC. under the authority of FAR 12.102(a). It has been determined that AKIRA TECHNOLOGIES INC. is the sole provider of DGEN refresher training.


NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC).


The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial



The NAICS Code for this procurement is 541330.



Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 5/26/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.



Oral communications are not acceptable in response to this notice.



NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .



Primary Point of Contact:


McKenzie Hanson


contact@example.gov


Procurement Specialist










More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 334519
New
Federal
Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials.
Solicitation # 80NSSC27946410Q
NASA Shared Services Center is seeking a transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials, specifically to advance the understanding of low-toxicity monopropellants. The requirement is for a Thermtest THW-L1S unit capable of measuring thermal conductivity, thermal diffusivity, and volumetric specific heat of liquids and phase change materials. Technical specifications include a temperature range of at least -50C to 200C, ASCENT compatible wetted surfaces, the ability to measure samples across a range of viscosity, and integration capabilities for an external chiller or heater unit. Performance will take place at Lab 105E in Building 4205 at the Marshall Space Flight Center, with testing scheduled to begin in the winter of 2026. This procurement is being conducted under NAICS code 334519 as a commercial item acquisition following FAR Part 12. NASA intends to issue a sole source contract to Thermtest Inc, as they have been determined to be the sole provider of the required equipment. This notice is currently a request for capability statements rather than price quotes to determine if the procurement can be conducted on a competitive basis. Interested organizations must submit their qualifications to the identified points of contact by 8:00 a.m. CST on October 30, 2026. All submissions must reference the notice ID, and oral communications are not permitted.
Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
Federal
Yateks 3D video borescope system
Solicitation # 80NSSC27946179Q
Solicitation 80NSSC27946179Q is a firm-fixed-price contract opportunity issued by the NASA Shared Services Center for the procurement of a Yateks 3D video borescope system for the Goddard Space Flight Center. This is a brand-name requirement specifically for the Yateks Realta 3D system, which includes the iShot Imaging E Series Monitor Kit (PN: EM10418). The system was selected for its specialized capabilities, including motorized 360-degree articulation, forward-facing stereo 3D measurement, and full-HD imaging. The procurement is set aside for small businesses under NAICS code 334519, with delivery expected within one to two weeks after receipt of order. Shipping is FOB Destination to Greenbelt, Maryland. The award will be granted based on the lowest price technically acceptable (LPTA) criteria. To be eligible, responses must be submitted by authorized resellers only and must include a letter of authorization and proof of manufacturer pricing. Offerors must be registered in the System for Award Management (SAM) and include their CAGE code or Unique Entity ID on the proposal. All quotes are due by October 22, 2026, and must be submitted via email to Cody Guidry. The contract includes specific requirements for duty-free entry marking and strict compliance with U.S. export control laws, including ITAR and EAR regulations.
Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 16 hours
View Details
NAICS: 312111
New
Federal
NCS Customized Flex-11 Security Cabinet (CITM AUTH REQUIRED PRIOR TO AWARD)
Solicitation # 80NSSC26946481Q
Solicitation 80NSSC26946481Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the procurement of two TAA-compliant NCS Customized Flex-11 Security Cabinets and associated accessories. The required hardware includes electronic keypad locks with physical overrides, eleven Corning Fiber Optic Cables, seventeen Blackbox-KVM Extender Kits over Fiber supporting dual monitors and DisplayPort 4K, and Corning Closet Connector Housing. This is a delivery-only requirement with no installation services included, and equivalent cabinets are not accepted. The place of performance is the AEGIS facility at the NASA Marshall Space Flight Center in Huntsville, Alabama, with delivery terms specified as FOB Destination. This procurement is set aside for small businesses under NAICS code 312111, and all offerors must be registered in the System for Award Management. The government will award the contract based on the lowest price technically acceptable (LPTA) criteria, provided the offeror demonstrates the ability to meet all technical requirements. The period of performance is six weeks after receipt of order. Quotes must be submitted via email to the primary point of contact by October 26, 2026. Contractors are required to comply with U.S. export control laws, including ITAR and EAR, and must adhere to specific packaging and marking requirements for duty-free entry of foreign supplies.
Soft Drink Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
Federal
Zygo Purchase
Solicitation # 80NSSC27948060Q
The NASA Shared Services Center is pursuing a sole source procurement under FAR 12.102(a) to award a contract to Zygo Corporation for the upgrade of an existing NewView 6000 series optical profiler to the NewView 9000 series. This upgrade is critical for improving metrology capabilities used to measure micrometeoroid impacts, which directly informs the architecture of the Habitable Worlds Observatory. The government has determined that Zygo Corporation is the only authorized provider capable of performing this work due to their proprietary knowledge of the control systems and the need to mitigate technical risks associated with system incompatibility. The scope of work includes the procurement of a NewView 9000 series optical head, electronics, staging, a Core Ultra i7 System Controller with 32 GB DDR5 SDRAM, a 5-axis motorized system, and various specialized lenses and turrets. Additionally, the contract covers 16 hours of on-site installation labor at the NASA Marshall Space Flight Center in Huntsville, Alabama, and requires a Certificate of Calibration utilizing ISO-17025 traceability. The estimated lead time for delivery is 8 to 10 weeks after receipt of order, with an additional 3 to 4 weeks for installation. This acquisition is conducted as a commercial item procurement under FAR Part 12 and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman.
Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS