Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Diesel Engine Coolant Fluid Tank Manufacturer

Active

Federal

Response Deadline09/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense Land Supply Chain involves the manufacture and supply of two finished diesel engine coolant fluid tanks for prime contractors supporting DLA supply contracts. The manufacturer must produce the parts in strict accordance with TDP Rev A Gen 1 and NSN 2815-01-583-2813, ensuring all quality control measures align with the DLA Master List of Technical and Quality Requirements. The contractor is responsible for providing the necessary tooling to meet these specific technical specifications. The project falls under NAICS code 336390 and is designated for performance at Fort Bragg, North Carolina. Interested parties must respond by September 25, 2026, following the solicitation posted on September 14, 2026.

General Info

Manufacture two diesel engine coolant tanks for DoD per TDP Rev A specifications.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

FORT BRAGG, NC, 28310, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-T-11Q1.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TANK, COOLANT FLUID, DIE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 25

Submission deadline

Response Deadline

09/25/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies finished diesel engine coolant fluid tanks for prime contractors delivering DLA supply contracts. Manufactures parts in strict accordance with TDP Rev A Gen 1 and NSN 2815-01-583-2813, performing quality control to meet the DLA Master List of Technical and Quality Requirements. Requires tooling to produce tanks per TDP specifications. Delivers two finished coolant fluid tanks.

Similar Contracts

Same NAICS industry code

Wheel Spindle Supplier (NSN 2530-01-398-5344)This subcontract involves the manufacture and supply of two driving-nondriving wheel spindles identified by NSN 2530-01-398-5344 for prime contractors supporting Department of Defense DLA supply contracts. The supplier is required to use precision machining equipment to ensure all parts strictly adhere to the provided technical data package and government specifications. The project falls under NAICS code 336390 and is managed by the Land Supply Chain agency. Performance of the contract is centered in Brockton, Massachusetts, with a response deadline set for September 25, 2026.

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Supply of Exhaust Mufflers (NSN 2990015826459)This subcontract with the Department of Defense Land Supply Chain involves the manufacture and supply of 16 exhaust mufflers under NSN 2990015826459. The contractor is responsible for ensuring all units meet strict technical specifications and are packaged according to DLA Packaging Requirements for Procurement RP001. Delivery is established as FOB Origin under the First Destination Transportation program, requiring the contractor to transport the completed mufflers to a government arranged transportation point. The performance of this contract is centered in Herlong, and it falls under NAICS code 336390.

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M4-26-T-411D

FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

DOOR STORAGE BOX

Solicitation # SPE7L4-26-T-6690

Solicitation SPE7L4-26-T-6690 is a fixed-price request for quotation issued by the Defense Logistics Agency for the procurement of one door storage box, identified by NSN 2540015970918 and Oshkosh Defense LLC part number 3847850. The requirement is managed by the LSO Combat Vehicles and Armament and requires delivery within five days of the order. The item is to be delivered FOB Origin to the Depot Stock Receiving Warehouse at Fort Irwin, California. Inspection and acceptance will take place at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 and RP001. Non-hazardous materials must be packaged per ASTM D3951, while hazardous materials must follow TQ requirement IP025 and the Hazard Communication Standard. Offerors must submit quotes via the DLA Internet Bid Board System (DIBBS) and comply with the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses regarding trafficking in persons, cybersecurity, and employment eligibility. Invoicing and payment processing must be conducted through the Wide Area Workflow (WAWF) system.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

MIRROR, REARVIEW

Solicitation # SPE7LX-26-U-003N

DLA Land and Maritime is soliciting quotes for the procurement of rear view mirrors under NSN 2540218789053. The requirement includes an initial quantity of 294 units to be delivered within 81 days after the order. This solicitation may result in an Automated Indefinite Delivery Contract with a one year term or a maximum aggregate value of 350,000.00 dollars. The contract anticipates approximately four orders per year with a guaranteed minimum quantity of 44 units, shipping to various CONUS and OCONUS DLA Depots. The RFQ is open to all responsible sources, though specific approved sources have been identified. Quotes must be submitted electronically by September 29, 2026. This procurement falls under NAICS code 336390 and is managed by the Department of Defense office located in Columbus, Ohio. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled through the specified electronic channels.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

SILENCER, EXHAUST, FN

Solicitation # SPE7L1-26-T-11X6

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

SENSOR, ROTOR, TEMPER

Solicitation # SPE4A5-26-T-424E

Solicitation SPE4A5-26-T-424E is a request for quotations issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of 21 rotor temperature sensors, identified by NSN 2990010861450. The items must strictly conform to Source Controlled Item Drawing 12286972, Revision J, CAGE 19207. Delivery is required by July 18, 2027, with a need ship date of March 8, 2027. The contract is established as FOB Origin, with the final destination for inspection and acceptance being DLA Dist San Joaquin in Tracy, California. The procurement incorporates rigorous quality and technical standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements. Key regulatory requirements include a CMMC Level 2 Self-Assessment, adherence to the Buy American and Balance of Payments Program, and the use of Wide Area WorkFlow for invoicing. Evaluation for award may include a HUBZone price preference, and the government will not consider offers utilizing additive manufacturing unless specifically authorized.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

MIRROR ASSEMBLY, REA

Solicitation # SPE7L0-26-T-0457

LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

CONTROL ASSEMBLY, PUSH-

Solicitation # SPE7L1-26-T-11P7

Solicitation SPE7L1-26-T-11P7 is a fixed-price request for quotation issued by the DLA Land and Maritime Land Supply Chain for the procurement of one push-pull control assembly. The required item is identified by NSN 2990-01-526-5637 and part number 200-03333-0144 from Orscheln Products L.L.C. The original required delivery date is September 11, 2026, with a delivery timeline of five days after receipt of order. The item is to be delivered FOB Origin to the USN SRF-JRMC in Sasebo, Japan, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements for procurement under RP001. Technical and quality requirements are governed by the DLA Master List. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and safeguarding of covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by September 25, 2026, and must be submitted via the SF18 form to the issuing office in Columbus, Ohio.

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M4-26-T-411A

FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7L3-26-T-252H

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

VENTILATOR, AIR CIRCULA

Solicitation # SPE7M1-26-U-5649

Solicitation SPE7M1-26-U-5649 is a total small business set-aside issued by DLA Land and Maritime for the procurement of air circulating ventilators, specifically NSN 2540015791355 and part number RDH RD3 9358 0. The requirement is for an estimated quantity of 18 units with a delivery window of 80 days after the order is received. This procurement may result in an indefinite delivery contract with a maximum value of 350,000.00 dollars. Shipping is established as FOB Origin, while both inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must be packaged per ASTM D3951, while hazardous materials must follow FED-STD-313 and TQ requirement IP025. All DLA Master List technical and quality requirements take precedence over commercial packaging standards. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation also incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Supply of Control Assembly, Push-Pull (NSN 2990-01-526-5637)This subcontract with the Department of Defense Land Supply Chain involves the procurement of one Push-Pull Control Assembly, specifically part number 200-03333-0144 manufactured by Orschen Products L.L.C. and identified by NSN 2990-01-526-5637. The selected provider is responsible for packaging and shipping the item FOB Origin to Sasebo, Japan. To be eligible, contractors must maintain an active SAM registration and comply with Covered Defense Telecommunications representations. The opportunity is categorized under NAICS code 423810, with a response deadline of September 25, 2026.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Supply of Nonmetallic Hose Assembly (NSN 4720016019488)This subcontract involves the manufacture and supply of one nonmetallic hose assembly, identified by NSN 4720016019488, for the Department of Defense Land Supply Chain. The provider is responsible for ensuring the assembly meets all specified technical requirements and quality control standards, with final delivery to the DLA Distribution Management Office in Barstow, California. Compliance is required for packaging and labeling according to MIL-STD-129, ASTM D3951, and RP001 standards. Additionally, the provider must supply Material Safety Data Sheets and labels that conform to 29 CFR 1910.1200 for any hazardous materials. The contract falls under NAICS code 326220 and was posted on September 14, 2026, with a response deadline of September 25, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

Helical Compression Spring Supply (NSN 5360-01-124-1405)This subcontract involves the supply of 36 helical compression springs for prime contractors supporting DLA Land and Maritime projects. The contractor is responsible for manufacturing or sourcing springs that meet NSN 5360-01-124-1405 specifications, utilizing necessary spring winding and heat-treatment equipment. Quality control must be performed according to the DLA Master List of Technical and Quality Requirements, with packaging and marking adhering to ASTM D3951 and MIL-STD-129 standards. The project is managed by the Department of Defense under the Land Supply Chain agency, with performance taking place in Phoenix, Arizona. Interested parties must respond by September 25, 2026, for this requirement categorized under NAICS code 332112.

Nonferrous Forging

POSTED

about 17 hours ago

DEADLINE

Supply of Hydraulic Accumulators (NSN 2090-01-456-0101)This subcontract involves the manufacture or procurement of 24 hydraulic accumulators, specifically NSN 2090-01-456-0101, to support prime contractors delivering DLA Land and Maritime supply contracts. The contractor must ensure all units adhere to the DLA Master List of Technical and Quality Requirements and follow RP001 packaging standards for procurement. Performance will take place in New Cumberland, Pennsylvania, and requires the provider to maintain an active SAM registration. The opportunity is a Total Small Business Set-Aside under NAICS code 238220 for the Department of Defense Land Supply Chain. Interested parties must respond by September 25, 2026, following the solicitation posted on September 14, 2026. The final deliverable consists of 24 packaged hydraulic accumulators meeting all specified technical and quality standards.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and Palletization ServicesThis subcontract for the Department of Defense Land Supply Chain involves providing specialized military-grade packaging and palletization services for prime contractors fulfilling DLA supply contracts. The service provider is responsible for ensuring all shipments are marked and labeled according to MIL-STD-129 and palletized in accordance with RP001 DLA Packaging Requirements. This requires the use of approved securing equipment and compliant labeling systems to deliver fully prepared shipments. The project is based in Brockton, Massachusetts, under NAICS code 488510. Interested parties must respond by September 25, 2026, to meet the requirements of this specialized logistics support contract.

Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging, marking, and palletization for prime contractors under DLA Land and Maritime supply contracts. The service provider must adhere to strict regulatory standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, while utilizing specific preservation, wrap, and unit container materials. The contractor is responsible for ensuring all shipments are delivered via the fastest traceable means to Fort Sill, Oklahoma. This opportunity is managed by the Department of Defense Land Supply Chain under NAICS code 561910, with a response deadline of September 25, 2026.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Helical Compression Springs (Critical Application)This subcontract involves the manufacture and supply of two helical compression springs, specifically part number 1270B35 under NSN 5360011236192, for prime contractors supporting the Department of Defense Land Supply Chain. Production requires the use of precision winding and heat-treatment equipment to meet Critical Application Item quality standards and the DLA Master List of Technical and Quality Requirements. The performance of this contract is based in Fort Sill, Oklahoma, and requires strict adherence to NIST SP 800-171 cybersecurity compliance. The opportunity was posted on September 14, 2026, with a response deadline of September 25, 2026, falling under NAICS code 332613.

Spring Manufacturing

POSTED

about 17 hours ago

DEADLINE

Nonmetallic Tubing Supplier (NSN 4710016578489)This subcontract with the Department of Defense Land Supply Chain involves the manufacture or sourcing of one unit of nonmetallic tubing meeting NSN 4710016578489 specifications. The supplier is responsible for ensuring all items are packaged according to RP001 and marked in compliance with MIL-STD-129. Performance will take place in Fort Drum, New York, under NAICS code 326122. The contractor must strictly adhere to DFARS 252.223-7008 regarding hexavalent chromium and is required to provide all necessary Safety Data Sheets for any hazardous materials involved. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Control Assembly, Push-Pull (NSN 3040015265871)This subcontract involves the supply of one Control Assembly, Push-Pull, identified by NSN 3040015265871 and part number 200-04333-0096 from Orschenl Products L.L.C. The contract is managed by the Department of Defense Land Supply Chain and is intended for prime contractors. The physical hardware must be delivered within five days of the order, with performance taking place at FPO 96322-1400. The supplier is required to adhere to specific packaging and marking standards, specifically ASTM D3951 and MIL-STD-129. Additionally, the provider must supply all applicable Safety Data Sheets and hazard labels. The opportunity was posted on September 14, 2026, with a response deadline of September 25, 2026, under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports the Department of Defense Land Supply Chain by providing specialized commercial and military-grade packaging, marking, and labeling for prime contractors. The scope of work includes packaging items according to ASTM D3951 and handling hazardous materials per TQ requirement IP025, with all marking and labeling performed in accordance with MIL-STD-129 to ensure shipments are ready for government delivery. The opportunity is a Total Small Business Set-Aside under NAICS code 561910, with the place of performance located in Texarkana, Texas. Interested parties must respond by September 25, 2026.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Utility Access Door Manufacturer/SupplierThis subcontract under the Department of Defense Land Supply Chain involves the manufacture and supply of seven utility access doors meeting the specifications for part number 7017235398. The supplier is responsible for ensuring all materials are free of Class I ozone-depleting chemicals and must adhere to quality control standards and safety data requirements for hazardous materials as outlined in FED-STD-313. The project is designated as a Total Small Business Set-Aside under NAICS code 332323, with performance taking place in Texarkana, Texas. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS