This Solicitation opportunity from Department Of Defense was posted on August 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DISK, VALVE

Closed

SPE7MC-26-T-228HFederal

Submission Closed09/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0010426QND60

Solicitation N00104-26-Q-ND60 is a request for quotations for the procurement of a Valve Manifold Assembly (NIIN: 015454022) for the Department of Defense, managed by NAVSUP Weapon Systems Support Mechanicsburg. The item is designated as a Critical Safety Item and Special Emphasis material Level I, meaning any defect could lead to catastrophic failure, loss of shipboard systems, or loss of life. Due to this criticality, the contract mandates rigorous quality assurance, including a quality system compliant with ISO-9001 or MIL-I-45208, 100% inspection of material verification and traceability data, and a zero-defect threshold for lot acceptance. The delivery timeline is set at 200 days with FOB Destination terms. The award will be made to a single technically acceptable offeror based on a trade-off where past performance is considered more important than price. Evaluation will utilize the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Contractors must utilize the Wide Area Workflow (WAWF) for electronic invoicing and the Electronic Contractor Data Submission (ECDS) system for technical data. Key requirements include strict adherence to MIL-STD-2073 for packaging, MIL-STD-130 for unique identification, and the submission of comprehensive certificates of compliance and test results. The procurement is certified for national defense under the Defense Priorities and Allocations System (DPAS) and requires strict safeguarding of covered defense information per DFARS 252.204-7012.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE13

This solicitation is for the procurement of a 4-inch swing check valve assembly, designated as Special Emphasis material due to its use in crucial shipboard systems where failure could result in serious injury or loss of the vessel. The assembly must conform to Emerson Crosby Drawing DS-B-90380, Revision E, Interim Change 3. Key material requirements include the use of ASTM-B369 for the body and cover, and QQ-N-286 for studs. The contract mandates rigorous quality controls, including hydrostatic and seat tightness pressure tests, radiography of the body and cover, and strict adherence to FED-STD-H28 for thread inspection. The award will be DX certified for national defense under the Defense Priorities and Allocations System. Contractors must provide comprehensive objective quality evidence, including chemical and mechanical analysis, and maintain strict traceability for all raw materials. The contract requires a one-year warranty from the date of delivery and specifies that the item is FOB Destination. All deliverables must be accompanied by a Special Emphasis Certificate of Compliance and must meet stringent non-destructive testing and marking requirements to ensure safety and reliability.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010423QBM60

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE11

This contract is a solicitation for the procurement of a valve disk assembly, identified as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The contractor must adhere to strict quality standards, including ISO-9001 and specific Navy welding and brazing specifications. Key requirements include the use of SAE-AMS 5643 material for the seat plate, strict adherence to thread inspection standards, and a total prohibition of mercury. The agreement is DO certified for national defense under the Defense Priorities and Allocations System. The contractor is required to provide comprehensive documentation, including a Certificate of Compliance, test certifications, and objective quality evidence via the Wide Area Workflow (WAWF) system. All welding procedures and qualification data must be submitted and approved by the government prior to production. Government Quality Assurance will be performed at the source through the Defense Contract Management Agency. The contract also mandates strict configuration control, requiring formal Engineering Change Proposals for any modifications affecting the form, fit, or function of the equipment.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QBY09

Solicitation N0010426QBY09 is a total small business set-aside for the procurement of Adapter Assemblies (NIIN 016848795) for the Department of Defense, managed by NAVSUP Weapon Systems Support Mech. The requirement involves the delivery of these assemblies to multiple destinations, including W25G1U and W62G2T, with a delivery window of 180 days and FOB Destination terms. The procurement is based on Technical Data Package Version 002, and the contractor is required to adhere to strict quality assurance standards detailed in the Individual Repair Part Ordering Data (IRPOD), including the submission of pre-manufacturing procedure packages within 45 days of award and certified reports of test and inspection upon delivery. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer. Evaluation includes a 10 percent price preference for HUBZone small businesses and risk assessments via the Supplier Performance Risk System. The contract mandates compliance with various federal and defense regulations, including NIST SP 800-171 for cybersecurity, MIL-STD-129 for marking, and MIL-STD-2073-1 for packaging. Invoicing must be processed electronically through the Wide Area Workflow system. Following amendments, the closing date for submissions via email or NECO is November 12, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

47--STRAINER ELEMENT,SE

Solicitation # N0010426QBY08

Solicitation N0010426QBY08 is a request for the manufacture and supply of 14 strainer elements, identified as part number 263371301-0161 and NIIN 015849326. The procurement is managed by the NAVSUP Weapon Systems Support Mech office in Mechanicsburg, Pennsylvania, and is designated as a DO rated order for national defense. The items must be produced in accordance with TDP Version 003 and drawing 2633-713-01, with a strict requirement that mercury not be intentionally added to the hardware. Delivery is required within 180 days on an FOB Destination basis, with shipments split between DLA Distribution New Cumberland and another specified location. The contract will be awarded to the responsible offeror submitting the lowest priced, technically acceptable offer. Evaluation includes a 10 percent price preference for HUBZone small businesses and a review of supplier risk via the Supplier Performance Risk System. Key administrative requirements include the use of Wide Area Workflow for invoicing, inspection and acceptance at the origin, and adherence to MIL-STD-2073-1 for packaging, with labels specifically marked as strainer basket. The solicitation has been modified via Amendment 0002 to extend the closing date to November 12, 2026, and to increase the required quantity.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QBB21

This fixed-price solicitation from the Navsup Weapon Systems Support Mech is for the procurement of packing nuts, specifically NIIN 007813210, to be provided in accordance with Technical Data Package version 003. The award will be granted to the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to non-HUBZone small business concerns. Delivery is required within 225 days on an FOB Destination basis. The contractor must adhere to strict quality and technical standards, including the Individual Repair Part Ordering Data, MIL-STD-130 for identification, and MIL-STD-2073 for packaging. Key administrative requirements include the electronic submission of all Reports of Test and Inspection through the Wide Area Workflow platform and the maintenance of an inspection system acceptable to the government. Inspection and acceptance will occur at the origin. The contract incorporates significant security and compliance mandates, including cybersecurity maturity model certification, safeguarding of covered defense information, and the protection of Naval Nuclear Propulsion Information. Additionally, the contractor must comply with prohibitions regarding Chinese military companies and provide safety data sheets for any hazardous materials delivered. Technical documentation and drawings are available via the BPMI website, and pricing for quotations remains valid for 60 days after the closing date.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QND48

Solicitation N00104-26-Q-ND48 is a total small business set-aside request for quotations for the procurement of a valve gland (NSN 1HM 4820-01-103-2740 L1). The material is designated as Special Emphasis material due to its use in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. The requirement specifies a delivery period of 200 days, with terms set as FOB Destination to the Portsmouth Naval Shipyard in Kittery, Maine. Award evaluation will prioritize past performance over price, utilizing the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. The contractor must maintain a high-level quality system compliant with ISO-9001 or MIL-I-45208 and provide a one-year warranty from the date of delivery. Key deliverables include a Test Certification (CDRL DI-MISC-80678) and a Special Emphasis Certificate of Compliance (CDRL DI-MISC-S0678) ensuring full traceability. All invoicing and certification data must be processed through Wide Area Workflow (WAWF). Strict adherence to mercury-free requirements and specific packaging standards, including MIL-STD-2073-1 and MIL-STD-129, is mandatory. If the offeror is not the Original Equipment Manufacturer, they must provide the OEM's CAGE code and a signed letter of authorization.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QND64

This solicitation, number N0010426QND64, is for the procurement of a globe valve (NIIN: 015453456) to be delivered to the Portsmouth Naval Shipyard within 200 days. The item is designated as a Critical Safety Item (CSI) and Special Emphasis material, meaning its failure could lead to catastrophic shipboard failure or loss of life. Consequently, the contract mandates rigorous quality controls, including a required Quality Assurance Manual meeting ISO 9001 or MIL-I-45208 standards, 100% inspection of material verification and non-destructive testing (NDT) certifications, and a zero-defect lot acceptance policy. The procurement is DO rated for national defense and requires the contractor to provide full traceability and a certificate of compliance. The award will be made to a single offeror based on a combination of price and past performance, with past performance weighted as more important than price. Technical requirements include adherence to Vacco drawing V3D10324 and specific material certifications for the orifice block, poppet, and bonnet. Invoicing and receiving reports must be processed through the Wide Area Workflow (WAWF) system. The contract also incorporates strict federal and defense regulations, including the Buy American Act, safeguarding of covered defense information under DFARS 252.204-7012, and specific packaging standards per MIL-STD-2073-1. If the offeror is not the Original Equipment Manufacturer, a signed letter of authorization on the OEM's letterhead is required.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE15

This solicitation is for the refurbishment of manifold and valve assemblies used in critical shipboard systems. Due to the high risk associated with material failure, these items are designated as Special Emphasis material, requiring strict quality control, comprehensive material traceability, and adherence to specific chemical and mechanical analysis standards. The scope includes the inspection, disassembly, and refurbishment of components such as manifold assemblies, regulator assemblies, and relief valves, ensuring they meet the technical specifications outlined in the provided Vacco drawings and military standards. Key requirements include a one-year warranty from the date of delivery and the submission of a detailed Certificate of Compliance. The contractor must perform rigorous testing, including intergranular corrosion tests, liquid penetrant inspections, and acceptance tests per ATP-S1E10033. All internal threads must be cut rather than cold-formed, and specific marking requirements for fasteners and component identification plates must be followed. The contract is DO certified for national defense under the Defense Priorities and Allocations System and requires bilateral execution.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QND62

Solicitation N00104-26-Q-ND62 is a request for quotations for the procurement of a valve body (NIIN 015359663) for use in a crucial shipboard system. Due to the critical nature of the component, it is designated as Special Emphasis material Level I, requiring strict quality assurance and certification to prevent failures that could lead to loss of life or vital shipboard systems. The requirement is issued under Emergency Acquisition Flexibilities and is DPAS DO certified for national defense. The delivery period is 200 days on an FOB Destination basis, with payment and receiving reports processed through the Wide Area Workflow system. The government will make a single award based on the most advantageous offer, prioritizing past performance over price. Technical requirements include adherence to ISO-9001, specific oxygen cleaning per MIL-STD-1330, and strict thread inspection per FED-STD-H28. The contractor must provide a Certificate of Compliance and detailed test certifications, including non-destructive testing and chemical analysis for SAE AMS-QQ-S-763 Class 304 material. Quality assurance is performed at the source by DCMA, and lot acceptance is based on a zero-defect policy. Offerors who are not the Original Equipment Manufacturer must provide a signed letter of authorization and the OEM's CAGE code.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QFE41

This fixed-price solicitation, number N0010426QFE41, is issued by the Navsup Weapon Systems Support Mech for the procurement of one TEE, TUBE TO BOSS (NSN 017336474). Due to its use in a crucial shipboard system, the item is designated as Special Emphasis material (Level I), meaning defective material could lead to serious personnel injury or loss of the ship. The contract requires the item to be manufactured according to SSP Fittings Corp P/N S6SRT-SF and mandates strict adherence to quality systems such as ISO-9001 or MIL-I-45208. The delivery schedule specifies a final delivery period of 210 days, with all certification data CDRLs submitted 20 days prior to delivery. The award will be a single award based primarily on past performance, categorized by a color-coded index, with price serving as a secondary factor. The contractor must comply with Buy American and Free Trade Agreements and provide a one-year warranty for supplies of a noncomplex nature. Packaging and marking must follow MIL-STD-2073 and MIL-STD-129, with physical identification per MIL-STD-130. Invoicing and receiving reports are to be processed electronically via the Wide Area Workflow (WAWF) system. Inspection and acceptance are set as FOB Destination. The deadline for the receipt of offers was extended to 4:30 PM EST on November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 29 days

AI Contract Overview

This solicitation, issued by the DLA Dist San Joaquin under solicitation number SPE7MC-26-T-228H, is for the procurement of three valve disks identified by NSN 4820-01-620-1620. The contract requires delivery within 118 days after the order is placed and falls under NAICS code 332919. Performance is located in Tracy, California, with a response deadline of September 8, 2026. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification and have completed specific DLA export-control training and questionnaires to access the necessary technical data. Additionally, all items must meet RP001 DLA packaging requirements.

General Info

DLA procurement for three valve disks in Tracy, CA, due September 8, 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

SPE7MC-26-T-228H RFQ for Quotations

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 26

Solicitation

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressUSA

Contacts

Paula Mcclary

contact@example.gov

+1 (555) 000-0000

Full Description

DISK,VALVE
DISK<(>,<)> VALVE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4820-01-620-1620 Quantity: 3 EA Purchase Request: 7017438988QTY: 3 Delivery: 118 days ADO