Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DISK, VALVE

Active
SPE7MC-26-T-237SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of three valve disks, identified by NSN 4820-01-620-1620. The contract requires delivery within 20 days after the order is placed, with the place of performance located in Bremerton, Washington. Due to the nature of the technical data involved, this contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required DOD export-controlled technical data training and questionnaires. All packaging must adhere to RP001 DLA requirements.

General Info

DLA procurement of three valve disks for delivery in Bremerton, Washington within 20 days.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

1400 FARRAGUT AVE, BREMERTON, WA, 98314-5001, USA

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-237S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DISK,VALVE
DISK<(>,<)> VALVE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4820-01-620-1620 Quantity: 3 EA Purchase Request: 7017137849QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M4-26-U-0422
This solicitation, issued by the DLA Land and Maritime Fluid Handling Division under number SPE7M4-26-U-0422, is a Request for Quotations for an indefinite-quantity, fixed-price contract to procure Hose Elbows (NSN 4730-01-576-5131). The procurement is designated as a Total Small Business Set-Aside with a maximum contract value of $350,000. While the estimated annual quantity is 34 units, the contract includes a guaranteed minimum of 5 units and a minimum delivery order quantity of 17 units. Deliveries are required within 87 days of order, under FOB Origin terms, with inspection and acceptance occurring at the destination. The contract incorporates rigorous technical, quality, and environmental standards. Specifically, Class I ozone-depleting chemicals are strictly prohibited, and all items must comply with the DLA Master List of Technical and Quality Requirements. Packaging must adhere to ASTM D3951 and RP001 for palletization, while marking and labeling must follow MIL-STD-129. Offerors must also comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and must safeguard covered defense information per DFARS requirements. Payment and receiving reports are to be processed electronically through the Wide Area Workflow (WAWF) system. Quotations must be submitted by August 26, 2026, and must not include used, reconditioned, or remanufactured items.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332919
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M0-26-T-062C
This contract is for the procurement of one pipe plug, identified by NSN 4730015890676, under solicitation number SPE7M0-26-T-062C. The item is associated with part numbers 00093001 from Elkhart Brass Manufacturing Company and 6201056 from Ed Etnyre & Co. Delivery is required within five days after the order, with a required delivery date of August 27, 2026. The shipment is designated as an NMCS shipment and must be sent via the fastest traceable means to the specified address in Grand Junction, Colorado. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically referencing RA001, RP001 for packaging, and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA master requirements take precedence. Terms include FOB Origin with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and requires palletization according to DLA procurement standards.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
Precision Metal Tubing and Nipple Manufacturing
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
Federal
48--VALVE ASSEMBLY, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBA56
NAVSUP Weapon Systems Support Philadelphia intends to award a sole source contract to Pacific Propeller International for the repair of four valve assemblies for C130 aircraft. As the Original Equipment Manufacturer and the only known source with the necessary data and rights for this repair, Pacific Propeller International is the designated provider under the authority of 10 U.S.C. 2304(c)(1). The procurement follows FAR Part 15 procedures and includes requirements for Unique Identification and compliance with Buy American clauses. The contract will have a duration of one year with delivery terms set as FOB Origin. While the government is pursuing a sole source award, it will consider capability statements or proposals from other responsible sources within 45 days of the notice. The solicitation is expected to be issued around August 25, 2026, with a closing date of September 24, 2026, and an anticipated award date in October 2026.
Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
DIBBS
48--VALVE,SAFETY RELIEF,RE
Solicitation # SPE7MC-26-T-231R
This contract is for the procurement of 23 remote control safety relief valves, identified by NSN 4820015938334 and Griswold Industries part number 20464001D. The order is designated as a critical application item and is being fulfilled for the Department of Defense via DLA Distribution San Joaquin. The required delivery date is April 19, 2027, with a delivery window of 222 days. The agreement specifies that the items must be delivered FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001, while adhering to the technical and quality standards outlined in the DLA Master List. This acquisition is designated as a Total Small Business Set-Aside under NAICS code 332919.
DLA DIST SAN JOAQUIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
Federal
STEM, VALVE
Solicitation # N0010426QNC95
This contract pertains to the supply of a stem for a 2-inch ball valve designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could lead to catastrophic outcomes including loss of life or vessel. The item must strictly conform to NAVSEA drawing 801-6408529 and referenced specifications including QQ-N-286 for material composition, MIL-STD-792 for marking, MIL-STD-1622 for cleaning, and T9074-AS-GIB-010/271 for ultrasonic inspection. Weld repair is prohibited on QQ-N-286 material, and all components must maintain traceability from raw material through final assembly via unique heat-lot markings applied per MIL-STD-792, with exceptions for small surfaces requiring durable tags. Chemical and mechanical testing must be performed on the stem and any starting material over 4 inches in dimension, with results certified by approved labs including Huntington Alloys, Metallurgical Consultants, and Naval Surface Warfare Center Carderock. Electronic signatures are accepted for certifications, provided they are uniquely controlled and auditable, and all certifications must include positive, unqualified statements of compliance without disclaimers. The contractor must maintain an ISO-9001 or MIL-I-45208 quality system with calibration aligned to ISO-10012 or ANSI-Z540.3, subject to government inspection at source. All sub-tier suppliers must be vetted for capability and performance, with quality requirements flowed down and monitored through audits. Receiving inspection requires 100% verification of traceability, certification completeness, and dimensional compliance per ANSI/ASQ Z1.4, with zero defects allowed in final lot acceptance. Certifications for each shipment must be electronically submitted via WAWF to Portsmouth Naval Shipyard, with strict "Ship to," "Inspect by," and "Accept by" codes, and no material may be shipped until written acceptance is received. Configuration control is paramount; any deviations or engineering changes must be formally proposed and approved by the Contracting Officer, with class I changes requiring a formal ECP that includes lifecycle cost impacts and logistic effects. The contract mandates mercury-free materials, prohibits marking of material with designators except fasteners, and requires full adherence to Buy American and Small Business Program requirements. All documentation must be submitted through ECDS, and government representatives have full rights to audit, inspect, and reject non
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QND46
This contract pertains to the procurement of a Compartment Salvage Ball Valve and associated components for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The material is designated as SPECIAL EMPHASIS Level I, requiring strict quality controls, full traceability, and comprehensive certification. The contractor must supply components per Drawing 4558706 and related specifications, including specific parts such as the Deck Fitting Nipple and Cap Assembly identified by NSNs 1H 4730-01-671-3260L1 and 1H 4730-01-210-6118L1. Material requirements are rigorous, mandating exact metallurgical compositions including QQ-N-281, ASTM-B150, SAE AMS 6931, and MIL-T-16420, with precise mechanical and chemical testing protocols. Traceability is mandatory from raw material through final assembly, with unique heat/lot markings on all components and certification documentation directly linked to each part. All metallic materials require quantitative chemical and mechanical analysis, and non-metallic components like seats must meet exact hardness, tensile, and water absorption thresholds with manufacturer-specific approval. Welding, brazing, and fastener fabrication are tightly regulated, requiring approved procedures, qualified personnel, and submission of qualification data prior to production. Fasteners must comply with MIL-DTL-1222 and NASM standards, with prohibited use of molybdenum disulfide lubricants and mandatory use of A-A-59004 anti-galling compound. No internal threads may be cold-formed; all must be cut. All certifications must be positive, unqualified, and legible, with no disclaimers permitted. Non-conforming materials will be rejected, and all inspections must follow zero-defect acceptance criteria for lot samples. The contractor must maintain an ISO-9001 compliant quality system with calibration adherence to ISO-10012 or ANSI-Z540.3, and government inspection is authorized at source. Subcontractors are bound by the same requirements and require explicit oversight. Packaging, preservation, and marking follow MIL-STD-2073, and all items must bear the designated CID T884305725. The contract invokes emergency acquisition flexibilities and is certified under the Defense Priorities and Allocations
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
NRP,PUMP,SERVO VALV
Solicitation # N0010426QUC32
This solicitation is for the repair of NRP PUMP SERVO VALV components under a firm-fixed-price agreement. The government requires the awardee to be an authorized repair source and specifies a requested Repair Turnaround Time of 120 days from the receipt of the asset. Failure to meet this turnaround time may result in a price reduction per unit per month, to be determined by the contractor during the quoting process. Key requirements include adherence to ISO9001 quality standards, MIL-STD packaging, and IUID requirements. Contractors must provide a throughput constraint for the items and are subject to an induction expiration date of 365 days after the award. Quotes must include the repair unit price, total price, and a test and evaluation fee for items determined to be beyond economical repair. All electronic submissions and inquiries are directed to the primary point of contact, Kate C. Heidelberger.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PARTS KIT,STOP-CHEC
Solicitation # N0010426QNE16
This solicitation from NAVSUP Weapon Systems Support Mechanicsburg seeks a parts kit for a 1 1/2 inch stop check in accordance with Navsea drawing 803-2177934. The material is designated as Special Emphasis material due to its use in crucial shipboard systems where failure could result in serious injury, loss of life, or loss of the vessel. Key components such as the bonnet ring, stem, disc holder, and bonnet require specific quantitative chemical and mechanical analysis and must adhere to strict material standards including QQ-N-281, ASTM-B164, and MIL-C-24679. The contract mandates rigorous testing, including non-destructive tests for welds and specific pressure tests with defined tolerances, as well as strict compliance with welding and brazing procedures. The contract includes comprehensive quality assurance and configuration control requirements. Contractors must maintain a total equipment baseline configuration and submit Engineering Change Proposals for any modifications affecting form, fit, or function. Strict traceability is required for all raw materials and sub-tier supplier components, and a Certificate of Compliance must be provided with each shipment. All certification data must be submitted to the Portsmouth Naval Shipyard via Wide Area Workflow for review and acceptance prior to shipment. Additionally, the award is subject to Defense Priorities and Allocations System (DPAS) rating for national defense and must comply with various federal regulations regarding small business subcontracting, Buy American requirements, and equal opportunity.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 25 days
View Details
NAICS: 332919
New
Federal
VALVE,CHECK
Solicitation # N0010426QBT89
This solicitation, issued by the Navsup Weapon Systems Support Mech, is for the procurement of check valves under a total small business set-aside. The contract is a fixed-price agreement with FOB destination terms and is designated as a DO rated order for national defense priority. Key technical requirements are governed by the Individual Repair Part Ordering Data (IRPOD), and contractors must adhere to specific quality standards, including MIL-I-45208 for higher-level contract quality requirements and strict prohibitions against the use of mercury. The contractor is responsible for submitting pre-manufacturing procedure packages within 45 days of award and providing Reports of Test and Inspection (ROTIs) 40 days prior to delivery. First article test reports are also due within 45 days of the order date. Pricing for quotations is generally valid for 60 days after the closing date. All technical documentation, including drawings and specifications, is managed through the BPMI e-commerce website, and the government reserves the right to issue single or multiple orders based on the proposal.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE, GLOBE W/ ACT
Solicitation # N0010426QEB89
The contract pertains to the procurement of a globe valve with actuator under solicitation N0010426QEB89, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical Division, with a response deadline of August 27, 2026. All technical and quality requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which takes precedence over other documents in case of conflict, followed by the contract schedule, terms and conditions, and referenced specifications such as MIL-STDs and commercial item descriptions. Compliance with specified document revisions is mandatory, and contractors must obtain written approval before using alternate revisions or deviations, including justification that proposed changes do not impact form, fit, function, or quality of the part. Mercury or mercury-containing compounds are strictly prohibited from contact with the supplied hardware. Quality assurance protocols are defined in the IRPOD, requiring contractors to maintain a government-acceptable inspection system and retain complete records throughout performance and beyond. Packaging must adhere to MIL-PRF-23199, specifically using heat-sealed envelopes for items subject to cleanliness controls as defined in referenced standards like MIL-STD-767 or MIL-STD-2041; use of green poly bags is permitted only under strict conditions, and fire-retardant packaging is no longer required. Pre-manufacturing submittals, including procedures, drawings, and other documentation listed in the IRPOD, must be submitted within 45 days after contract award for approval. A Certificate of Compliance per DI-MISC-81356 must accompany each delivery, aligned with the contract number, NSN, and item nomenclature. All contractual documents are deemed issued upon electronic transmission or mailing. Pricing is valid for 60 days after the closing date unless otherwise specified, and mandatory use of Workflow Pro (WFP) and compliance with Buy American, cybersecurity maturity, veteran and disability equal opportunity, and security prohibition requirements are enforced. Information security controls governed by DoDI 5230.24 apply to all materials provided, with distribution statements clearly designated. Access to required technical documents is restricted to the BPMI e-Commerce portal, requiring pre-registration and password access, and nuclear-related publications not available online must be requested directly through the contracting office with proper need-to-know certification. The contract requires adherence to detailed DD Form 1423 data submission protocols, including timelines, delivery frequencies, approval codes, and pricing groups for technical data packages.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QND36
This contract is for the manufacture of valve stems designated as SPECIAL EMPHASIS Material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic outcomes including loss of life or the vessel itself. The stems must conform precisely to NAVSEA drawing 803-5959296 and associated engineering documents, utilizing EB Specification 4581 material that is heat-traceable throughout production. Strict requirements govern material traceability, requiring permanent markings on each stem including the seller’s name, government ready-for-issue tag serial number, and heat number, applied in accordance with MIL-STD-792. All materials must be accompanied by certified test reports verifying chemical composition and mechanical properties, with electronic signatures accepted as valid under controlled processes. Re-certification is required whenever processing alters material properties, and all certifications must be 100% verified for completeness, legibility, and compliance. Quality assurance is rigorously enforced with mandatory adherence to ISO-9001, ISO-10012, and ISO/IEC 17025, or as an alternative, MIL-I-45208 and MIL-STD-45662. Welding and brazing, where applicable, require prior approval of procedures and qualification records, submitted electronically in Adobe PDF format, with specific attention to hardfacing, titanium welding, and filler metal traceability. Non-destructive testing, including dye penetrant inspection per T9074-AS-GIB-010/271 and MIL-STD-2035 acceptance, is mandatory. Every shipment requires submission of certification documentation via WAWF to Portsmouth Naval Shipyard, with ship-to, inspect-by, and accept-by codes designated and prior written acceptance required before shipment. The contractor must maintain documented quality systems subject to government audit, control all subcontractors to ensure compliance, and implement stringent material handling procedures to prevent commingling or loss of traceability from raw stock through final assembly. All waivers, deviations, and engineering change proposals must be submitted for prior approval by the Contracting Officer and follow specific classification and documentation protocols. The contract is issued under Emergency Acquisition Flexibilities, is DX-rated for national defense priority, and includes Buy American and small business set-aside provisions, with full compliance expected under a strict zero-defect acceptance standard for final inspection.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 335910
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-Q-2306
This contract is a firm fixed price solicitation issued by the Defense Logistics Agency for the procurement of two battery chargers, identified by part number 340550 and NSN 6130-01-727-9478. The delivery requirement is set for 60 days after order, with inspection and acceptance occurring at the destination. Shipping must be conducted via traceable means to specified locations in Indiana and Texas. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract specifies a non-extendable shelf life of 36 months for Type I lithium components and prohibits the intentional addition of mercury, except where functionally required for batteries or sensors.
Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
TUBE 3/8.ODX.028WT X14
Solicitation # SPEFA5-26-T-1037
This contract is for the procurement of one continuous length of metallic tubing with dimensions of 3/8 inch outer diameter, .028 inch wall thickness, and 144 inches in length. The material must comply with specifications MIL-T-8504 304 and AMS-T-6845 Rev B. A certificate of quality conformance is required, and the item must be packed according to ASTM D3951 and RP001 to prevent damage during shipment. The order is managed by the Defense Logistics Agency under solicitation SPEFA5-26-T-1037 and purchase request 7018058789. Delivery is required within five days after order, with the destination and inspection point set as Fleet Readiness Center East in Cherry Point, North Carolina. Quality assurance will be conducted using sampling methods per MIL-STD-1916 or ASQ H1331, and the material is subject to metal certification requirements.
Other Support Activities for Air Transportation

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-5010
This contract is for the procurement of lead acid AGM storage batteries, identified as commercial off the shelf items with NSN 6140016195434 and part number 8A8DM from East Penn Manufacturing Co. The agreement covers multiple line items with total quantities ranging from 3 to 4 units per request, featuring a non-extendable shelf life of 18 months. Delivery is required within 5 days, with FOB and inspection points set at the destination. The contract mandates strict adherence to DLA packaging, marking, and shipping requirements, specifically for hazardous materials and mercury-containing compounds. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Shipments are destined for various locations, including Al Udeid AB in Qatar, Middletown PA, and Thumrait RAFO Base in Qatar, with required delivery dates in August 2026.
Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-26-T-237N
This contract, identified as SPE7MC-26-T-237N, is a solicitation from the Defense Logistics Agency for the procurement of valve bodies under NSN 4820995918292. The requirement is split across three line items with total quantities of four, two, and two units respectively. Delivery is required within 10 days, with a required delivery date of August 25, 2026. The terms specify FOB Origin and destination-based inspection and acceptance. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing packaging standards ASTM D3951 and MIL-STD-129, as well as RP001 for palletization. There is a strict prohibition against the use of Class I ozone-depleting chemicals. Shipments are directed to the 2D Recon BN 2D Mardiv at Camp Lejeune, North Carolina, and must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4963
This contract is for the procurement of one power supply mounting bracket, identified by NSN 6130200145535 and part number 843-01-16 from Pivotal Power Inc. The acquisition is managed by the Defense Logistics Agency under solicitation SPE7L7-26-T-4963, with a required delivery date of August 4, 2026, and a delivery timeframe of five days after order. The item is subject to specific quality and technical requirements, including a 60-month extendable shelf life and strict adherence to DLA packaging and marking standards such as MIL-STD-2073-1E and MIL-STD-129. Shipping is designated as FOB Origin, with the final destination located at the US Naval Base Sasebo in Japan. Inspection and acceptance will occur at the destination point.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
ADAPTER, AIR HOSE, REGUL
Solicitation # SPE8E6-26-T-4369
This contract is for the procurement of two air hose regulator adapters, identified by NSN 4220017180726 and part number E1400348 from Wing Inflatables Inc. The order is managed by the Defense Logistics Agency under solicitation SPE8E6-26-T-4369 with a required delivery date of August 25, 2026. Delivery is expected within 10 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Key compliance requirements include the removal of government identification from non-accepted supplies and the protection of covered defense information. The items are to be shipped via the fastest traceable means to the Distribution Management Office at Camp Lejeune, North Carolina, and the material is noted to have no shelf life requirement.
All Other Rubber Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-Q-2303
This contract is a solicitation from the Defense Logistics Agency for the procurement of lead acid AGM storage batteries, specifically part number 12AVR100-3ET from East Penn Manufacturing Co. The requirement consists of two line items for 16 units each, totaling 32 batteries, under a firm fixed price agreement. Delivery is required within 60 days after order to the Naval Air Station in Key West, Florida. The batteries are classified as Type I items with a non-extendable shelf life of 18 months. Strict compliance is required for hazardous materials handling, including the submission of Safety Data Sheets and adherence to nonspillable battery marking and packaging standards per 49 CFR. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, and packaging must follow MIL-STD-2073-1E and DLA packaging requirements.

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATI
Solicitation # SPE8E6-26-T-4367
This contract, identified as SPE8E6-26-T-4367, is a solicitation by the Defense Logistics Agency for the procurement of identification markers, specifically part number HML11 from American Labelmark Company. The order consists of two rolls of material, with each roll measuring 167 feet. The required delivery date is August 25, 2026, with a delivery window of 20 days after the order is placed. The items are to be delivered FOB Origin and shipped via traceable means to the 82nd Airborne Division at Fort Bragg, North Carolina. The materials are classified as Type I shelf-life items with a 12-month non-extendable lifespan. To be accepted, the supplies must have at least 85 percent of their shelf life remaining at the time of delivery, and all markings must comply with MIL-STD-129. Packaging and palletization must adhere to DLA requirements and MIL-STD-2073-1E, with a specific emphasis on avoiding plastics for wrapping and cushioning where possible. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from any non-accepted supplies.
Books Printing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-238H
This contract is for the procurement of one check valve, identified by NSN 4820015064146 and part number 1260-017J, manufactured by Milwaukee Valve Co. The order is issued by the Defense Logistics Agency for delivery to the USS Arlington LPD 24. The required delivery date is August 25, 2026, with a delivery timeframe of 20 days after the order is placed. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and follow the DLA Master List of Technical and Quality Requirements. Because the item may require specific casting or forging, the government notes that special tooling may be necessary and provides contact information for assistance requests. Shipping is designated as FOB Destination, and the item must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-238T
This contract is for the procurement of one butterfly valve, identified by NSN 4810014423674 and associated with Morpac Industries part numbers 10015 and 10015-4. The item is a restricted source product requiring engineering source approval from the government design control activity. Compliance with Item Unique Identification (IUID) standards per MIL-STD-130 and DFARS 252.211-7003 is mandatory, and the use of class I ozone depleting chemicals is strictly prohibited. The delivery is required within 20 days, with the final destination being the USS Stockdale DDG 106. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Inspection and acceptance will take place at the destination, and the shipment must be handled via the fastest traceable means, specifically avoiding parcel post.
Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
KEYPAD, CONTROL-COMMUNI
Solicitation # SPE8E8-26-T-5340
This contract, identified as SPE8E8-26-T-5340, is a solicitation by the Defense Logistics Agency for the procurement of 20 units of a control-communicator keypad, part number 14051-1000-64, manufactured by L3Harris Technologies, Inc. The items are identified by NSN 6350-01-738-5145 and are subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Delivery is required within 20 days, with a final required delivery date of August 19, 2026. The shipment is destined for the USS Ronald Reagan CVN 76 via fastest traceable means, with inspection and acceptance occurring at the destination. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 standards.

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-Q-2304
This firm fixed price solicitation from the Defense Logistics Agency is for the procurement of three power supply units under part number 6130-01-494-8726. The order is split into two line items, with two units destined for Fort Campbell, Kentucky, and one unit for Yuma Proving Ground, Arizona. Delivery is required within 60 days after order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and the protection of covered defense information. Supplies must comply with source-controlled drawings and are prohibited from containing intentionally added mercury. Packaging must follow ASTM D3951 and MIL-STD-129, while sampling and quality assurance must align with MIL-STD-1916 or ASQ H1331. Shipping must be conducted via traceable means, specifically excluding parcel post.

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details