Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of The Navy was posted on September 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

DISPLAY,20.1" LCD — 7025016336147 — N0010426QXC19

Closed
N0010426QXC19

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210
New
SLED
Preventive Maintenance, Diagnostic and Installation Services for SunGuide ITS
Solicitation # DOT-RFP-27-6204SD
The Florida Department of Transportation District Six is soliciting proposals for the Transportation Systems Management and Operations and Intelligent Transportation Systems Device Maintenance Contract, identified as DOT-RFP-27-6204SD. This project involves providing preventive maintenance, diagnostic, and installation services for the SunGuide ITS infrastructure across Miami-Dade and Monroe Counties. The scope includes an integrated network of field devices such as fiber optic and wireless communications, CCTV cameras, Dynamic Message Signs, Microwave Vehicle Detection Systems, Ramp Signal Systems, Wrong Way Vehicle Detection Systems, Connected Vehicle technologies, and the Monroe County Traffic Signal System. The selected contractor will be required to provide comprehensive support for these assets on a 24/7/365 basis to ensure real-time monitoring by the SunGuide Transportation Management Center. The procurement process begins with an industry forum on December 17, 2026, followed by a formal advertisement on January 26, 2027. Proposals are due by February 16, 2027, with the contract award anticipated in May 2027. The project includes a planned two-month transition period between the existing maintenance contract and the new agreement to ensure continuity of service. Interested parties should coordinate with Suzanne Diaz at the District Six Contracts Office for further information regarding the proposal submission process.
Florida Department of Transportation

POSTED

about 6 hours ago

DEADLINE

in 30 days
NAICS: 811210
New
Federal
J065--FY27 SERVICES (BASE+4) Surgical Instrument Repair Services SPS VA NYHHS (VA-27-00005978)
Solicitation # 36C24227Q0136
The Department of Veterans Affairs, Network Contracting Office 02, is soliciting quotes for surgical instrument maintenance, repair, and refurbishment services for the Sterile Processing Services at the Brooklyn and Manhattan campuses of the New York Harbor Healthcare System. This requirement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The contract is structured as a base period with four option periods, not to exceed a total duration of five years. The scope of work includes preventive maintenance, scheduled repairs, and emergency services for various specialty trays and instruments, encompassing tasks such as sharpening, aligning, calibrating, ultrasonic cleaning, and polishing. Additionally, the contractor is responsible for the maintenance and restoration of instrument sterilization containers. Technical requirements mandate that services be performed in compliance with ANSI-AAMI ST-79 part 7.7 and original manufacturer specifications, with technicians possessing OEM factory-training credentials and calibration tools that are NIST-traceable. Deliverables include electronic summary reports for each visit, accountability lists for all picked-up and delivered items, and service date stickers on all completed trays. Award will be based on the lowest evaluated price among quotes that meet technical acceptability and past performance standards. Offers must be submitted electronically in two parts, consisting of a technical capability statement and a price quote, to the designated contracting officer by the specified deadline.
242-NETWORK Contract Office 02 (36C242)

POSTED

about 11 hours ago

DEADLINE

in 30 days

AI Contract Overview

Show more

Solicitation N0010426QXC19 is a request for quotation from the Navsup Weapon Systems Support Mechanicsburg for the teardown, evaluation, repair, and modification of 20.1 inch LCD Displays (NSN 7025-01-633-6147). The government is seeking a firm-fixed-price, not-to-exceed, or estimated price for these services. The awardee must be an authorized repair source and adhere to strict Repair Turnaround Time (RTAT) requirements, with failure to meet these timelines resulting in a per-unit, per-month price reduction. The contract includes a prospective option for the government to increase the quantity by up to 100 percent within 365 days of the award date. Key technical and administrative requirements include compliance with MIL-STD-130 for physical identification, IUID requirements per DFARS 252.211-7003, and packaging standards according to MIL-STD-2073. All repaired items must meet original manufacturer specifications and drawings, with government source inspection required. Invoicing and payment will be processed electronically through the Wide Area Workflow system. Evaluation of offerors will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risk. Submissions must be sent electronically to the procuring contracting officer, Russell W. Kreider.

General Info

Firm-fixed-price contract for repair and modification of 20.1 inch LCD displays.

Documents

1
PDF, High priority: read this firstrfq
High

Read the document

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Preventive Maintenance, Diagnostic and Installation Services for SunGuide ITSOpen now, due in 30 days
  • Supervisory Control and Data Acquisition (SCADA) Controls & InstrumentationOpen now, due in 55 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech
ContactsNo contacts available
OfficeMECHANICSBURG, PA, 17050-2411, USA
Office AddressMECHANICSBURG, PA, 17050-2411, USA
ContactsNo contact information available

Full Description

Show more
OPTION
Description
TDP VERSION NUMBER 005 1. SCOPE 1.1 This contract/purchase order contains the requirements for repair and the contract quality requirements for the DISPLAY,20.1" LCD . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The DISPLAY,20.1" LCD repaired under this contract/purchase order shall meet the operational and functional requirements as represented by the Cage Code(s) and reference number(s) listed below. All repair work shall be performed in accordance with the contractors repair/overhaul standard practices, manuals and directives including but not limited to drawings, technical orders, manufacturing operations, tooling instructions, approved repair standards and any other contractor or government approved documents developed to provide technical repair procedures. CAGE___Ref. No. ;5UTE0 219-32102; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-130, REV N, 16 NOV 2012; . 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 4.4 Inspection/Testing Repaired Items - The Contractor shall perform all inspection and testing requirements as specified in the original manufacturer's specifications and drawings. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings. There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows: A... approved for public release; distribution is unlimited. B... distribution authorized to US Governments agencies only. C... distribution authorized to US Government agencies and their contractors. D... distribution authorized to DoD and DoD contractors only. E... distribution authorized to DoD Components only. F... further distribution only as directed by Commander, Naval Sea Systems Command, code 09T. X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161. 6.2 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's item represented in this solicitation. If you desire to be considered as a potential source for award of this contract, proof of being an authorized distributor shall be provided on company letterhead signed by a responsible company official and sent with your offer to the Procurement Contracting Officer. 6.3 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS.

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 811210
New
UNIT, ENVIRONMENTAL — 4120016766285 — N0010427QXA17
Solicitation # N0010427QXA17
Solicitation N00104-27-Q-XA17, issued by NAVSUP Weapon Systems Support Mech, seeks a contractor for the teardown, evaluation, repair, and potential modification of eight Environmental Units (NSN 4120-01-676-6285). The government requires firm-fixed, not-to-exceed, or estimated pricing, with a requested repair turnaround time of 152 days. The contract includes an option for an increased quantity of up to 100 percent of the original amount. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Contractors must adhere to strict quality and technical standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073. All repaired items must meet original manufacturer specifications and functional requirements. The contractor is responsible for all inspections, though the government reserves the right to perform source inspections. Key administrative requirements include electronic invoicing via Wide Area Workflow, compliance with Item Unique Identification (IUID) standards, and the provision of Material Safety Data Sheets for any hazardous materials. Delivery is specified as FOB Destination, with items distributed to facilities in Pennsylvania and California.
Electronic and Precision Equipment Repair and Maintenance

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 811210
New
DSP PWR PC CHAMPAV — 5998016649562 — N0010427QXA19
Solicitation # N0010427QXA19
Solicitation N00104-27-Q-XA19, issued by NAVSUP Weapon Systems Support, is a firm-fixed-price request for the teardown, evaluation, repair, and potential modification of the DSP PWR PC CHAMPAV (NSN 5998-01-664-9562). The scope requires the contractor to restore the item to full operational and functional requirements using approved repair standards, technical orders, and original manufacturer specifications. The government is seeking a single award based on a best-value determination where past performance, evaluated via the DoD Supplier Performance Risk System, is considered more important than price. The contract includes a requested repair turnaround time of 256 days after receipt of the asset and provides the government a unilateral option to increase the order quantity by 100 percent within 365 days of award. Contractors are responsible for all inspection and testing, though the government reserves the right to perform source inspections. Strict adherence to marking and packaging standards is required, specifically MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging. Any changes in design or part numbers require written approval from the contracting officer, with specific codes used to categorize the nature of the substitution. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with DFARS cybersecurity and Buy American regulations. Offerors must be authorized distributors of the original manufacturer and submit their quotes electronically to the designated procurement representative.
Electronic and Precision Equipment Repair and Maintenance

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
ROD,THREADED END — 5306012982832 — N0010427QFA15
Solicitation # N0010427QFA15
This contract is for the procurement of one Connecting Rod (NSN 5306-01-298-2832), designated as a Critical Safety Item (CSI) and Special Emphasis material. Due to its use in crucial shipboard systems, the material is subject to strict quality controls to prevent failures that could lead to serious personnel injury or loss of the ship. The rod must be manufactured from QQ-N-286 material (Hot Finished, Annealed, and Age Hardened) and must adhere to Navships drawing 518-4674804. Key technical requirements include a prohibition on weld repairs for QQ-N-286 material, mandatory ultrasonic inspection on starting material, and a Slow Strain Rate Tensile Test performed by an approved laboratory. The contractor must maintain a quality system compliant with ISO-9001, ISO-10012, or ANSI-Z540.3, and provide a Certificate of Compliance and test certifications via the Wide Area WorkFlow (WAWF) system. All items must be 100% inspected for traceability and marking in accordance with MIL-STD-792. Delivery is required within 365 days, with packaging and marking following MIL-STD-2073 and MIL-STD-129. The government will perform quality assurance at the source, and any deviations or engineering changes must be approved by the Contracting Officer. This is a fixed-price, small business set-aside solicitation with a DO priority rating for national defense.
Machine Shops

POSTED

5 days ago

DEADLINE

in 27 days
View Details

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS